From: Anssi Hannula <anssi.hannula@iki.fi>
To: Andre Heider <a.heider@gmail.com>
Cc: "Takashi Iwai" <tiwai@suse.de>,
"Olivier Langlois" <olivier@trillion01.com>,
alsa-devel@alsa-project.org,
"Peter Frühberger" <fritsch@xbmc.org>
Subject: Re: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support
Date: Fri, 25 Oct 2013 20:23:48 +0300 [thread overview]
Message-ID: <526AA924.5070508@iki.fi> (raw)
In-Reply-To: <20131025165452.GA89428@deflower.internal>
25.10.2013 19:54, Andre Heider kirjoitti:
> On Fri, Oct 25, 2013 at 01:04:45AM +0200, Takashi Iwai wrote:
>> At Thu, 24 Oct 2013 21:10:33 +0300,
>> Anssi Hannula wrote:
>>>
>>> Hi all!
>>>
>>> Here's another revision of the ATI/AMD multichannel+HBR patchset.
>>>
>>> Changes:
>>> - added customizable callbacks instead of polluting generic code
>>> - fixed wrong codec id in rev3+ check (as previously noted)
>>> - cosmetics
>>>
>>> I've only tested this on NVIDIA/Intel, but I'd guess at least Peter
>>> should be able to test this on AMD in a few days or so. The earlier
>>> revisions were tested to fully work.
>>>
>>> Combined patch can be found at: http://onse.fi/files/atihdmi5.patch
>>> However, this patchset is on top recent sound-next commits so it does not
>>> directly apply on older kernels.
>>>
>>> Olivier, I hope you will be able to test this at some point as well
>>> (same things as last time), even though it will be a bit more work :)
>>
>> I applied all patches now. You can try sound git tree either master
>> or for-next branch.
>
[...]
> Anssi,
>
> I gave this a quick test, and it works on my 6850! Nice work!
> The HDMI output is connected to a Onkyo receiver from the future ;) :
> EDID for output HDMI-0
> Manufacturer: ONK Model: 1 Serial#: 16777216
> Year: 2245 Week: 255
> EDID Version: 1.3
> EDID (in hex):
[...]
>
> No DTS-HD/TrueHD support, but all 5.1 channels are working correctly.
Good to hear :)
[...]
> cat /proc/asound/card0/eld\#0.0
> monitor_present 1
> eld_valid 0
However, this should have eld_valid=1 and contain more info. To get a
hint on whether it is a bug in audio or video driver, could you give a
log with CONFIG_SND_DEBUG ?
AFAICS the sound git master tree should have the necessary support in
the radeon video driver to allow the audio driver to generate a valid
ELD with your card.
--
Anssi Hannula
next prev parent reply other threads:[~2013-10-25 17:23 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 18:10 [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-10-24 18:10 ` [PATCH 1/5] ALSA: hda - hdmi: Allow HDA patches to customize more operations Anssi Hannula
2013-10-24 18:10 ` [PATCH 2/5] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support Anssi Hannula
2013-10-24 18:10 ` [PATCH 3/5] ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 4/5] ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 5/5] ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs Anssi Hannula
2013-10-24 19:00 ` Anssi Hannula
2013-10-24 18:26 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-08 5:08 ` Olivier Langlois
2013-11-08 10:27 ` Anssi Hannula
2013-11-08 18:17 ` Olivier Langlois
2013-11-08 21:28 ` Olivier Langlois
2013-11-08 22:03 ` Anssi Hannula
2013-11-10 5:42 ` Olivier Langlois
2013-11-10 6:01 ` Anssi Hannula
2013-11-10 7:25 ` speaker-test chmap bugs (was: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support) Anssi Hannula
2013-11-10 18:29 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Anssi Hannula
2013-11-10 18:29 ` [PATCH 2/3] speaker-test: Always show chmap channel names if available Anssi Hannula
2013-11-10 18:29 ` [PATCH 3/3] speaker-test: Show out-of-chmap channels as Unknown Anssi Hannula
2013-11-11 15:56 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Takashi Iwai
2013-11-11 20:23 ` Anssi Hannula
2013-11-11 22:04 ` [PATCH 1/3 v2] " Anssi Hannula
2013-11-12 8:11 ` Takashi Iwai
2013-11-12 12:34 ` Anssi Hannula
2013-11-12 13:08 ` Takashi Iwai
2013-11-12 6:35 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Olivier Langlois
2013-11-14 0:04 ` Anssi Hannula
2013-11-09 8:35 ` Takashi Iwai
2013-10-24 23:04 ` Takashi Iwai
2013-10-25 16:54 ` Andre Heider
2013-10-25 17:13 ` Takashi Iwai
2013-10-25 17:23 ` Anssi Hannula [this message]
2013-10-25 18:25 ` Andre Heider
2013-10-28 17:52 ` Andre Heider
2013-10-28 18:12 ` Anssi Hannula
2013-10-28 18:17 ` Andre Heider
2013-10-28 18:25 ` Anssi Hannula
2013-10-28 18:35 ` Andre Heider
2013-10-28 20:35 ` Anssi Hannula
2013-10-28 22:00 ` Andre Heider
2013-10-28 22:42 ` Anssi Hannula
2013-10-28 23:15 ` Andre Heider
2013-10-29 19:52 ` LANGLOIS Olivier PIS -EXT
2013-10-29 20:30 ` Anssi Hannula
2013-10-28 23:19 ` [PATCH] drm/radeon/audio: fix missing multichannel PCM SAD in some cases Anssi Hannula
2013-10-31 23:38 ` Rafał Miłecki
2013-10-31 23:46 ` Rafał Miłecki
2013-10-31 23:52 ` Anssi Hannula
2013-11-02 1:01 ` Rafał Miłecki
2013-11-02 1:08 ` Anssi Hannula
2013-11-02 1:15 ` Rafał Miłecki
2013-11-02 1:03 ` Rafał Miłecki
2013-11-02 15:32 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-23 1:05 ` James Le Cuirot
2013-11-23 1:29 ` Anssi Hannula
2013-11-23 15:40 ` James Le Cuirot
2013-11-23 15:45 ` Anssi Hannula
2013-11-24 14:57 ` James Le Cuirot
2013-11-25 13:20 ` Anssi Hannula
2013-11-25 14:32 ` James Le Cuirot
2013-11-25 14:56 ` Anssi Hannula
2014-05-13 12:01 ` James Le Cuirot
2014-05-13 12:27 ` Anssi Hannula
2014-05-13 16:16 ` James Le Cuirot
2014-05-13 21:10 ` James Le Cuirot
2014-05-13 21:50 ` Anssi Hannula
2014-05-14 13:04 ` Deucher, Alexander
2014-05-14 13:19 ` James Le Cuirot
2013-11-25 15:07 ` Raymond Yau
2013-11-25 15:32 ` James Le Cuirot
2013-11-25 19:35 ` Anssi Hannula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526AA924.5070508@iki.fi \
--to=anssi.hannula@iki.fi \
--cc=a.heider@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=fritsch@xbmc.org \
--cc=olivier@trillion01.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.