From: Jeff Liu <jeff.liu@oracle.com>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] [PATCH 0/6] list: introduce list_last_entry_or_null()
Date: Sat, 16 Nov 2013 00:00:55 +0800 [thread overview]
Message-ID: <52864537.3040800@oracle.com> (raw)
In-Reply-To: <20131115141100.GA17659@infradead.org>
On 11/15 2013 22:11, Christoph Hellwig wrote:
> On Fri, Nov 15, 2013 at 12:29:48PM +0800, Jeff Liu wrote:
>> Hi Folks,
>>
>> This patch is trying to introduce a new list helper to retrieve the
>> last entry or return NULL if the list is empty corresponding to it,
>> which is inspired by Jiri Pirko's list_first_entry_or_null().
>
> How did we end up with the stupid _or_null prefix there? I think the
> functionality is useful, but the naming is way to verbose, especially
> given that a list_first_entry or list_last_entry that optimizes away
> that one check doesn't seem useful.
> Instead of encoding detailed semantics in the name a good kerneldoc
> comment is way better.
When it comes to this point, looks the name is really a bit verbose.
And yes, they have the same kernel doc to list_first_entry/list_last_entry.
But at rculist.h, we have another similar routine with this suffix, i.e,
list_fist_or_null_rcu().
Maybe we can figure out a better name and replace the existing code with it
as list_first_entry_or_null() has not yet been widely used, it mainly being
used in drivers code as per a grep against linux-next tree.
$ grep list_first_entry_or_null -r linux-next
./drivers/acpi/acpi_ipmi.c: driver_data.selected_smi = list_first_entry_or_null(
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/net/team/team.c: port = list_first_entry_or_null(&team->port_list,
./drivers/net/ethernet/sfc/mcdi.c: async = list_first_entry_or_null(
./drivers/net/ethernet/intel/i40e/i40e_main.c: return list_first_entry_or_null(&vsi->mac_filter_list,
./drivers/net/vxlan.c: rd = list_first_entry_or_null(&f->remotes, struct vxlan_rdst, list);
./drivers/of/irq.c: desc = list_first_entry_or_null(&intc_parent_list,
./fs/xfs/xfs_trans_priv.h: return list_first_entry_or_null(&ailp->xa_ail, struct xfs_log_item,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
Thanks,
-Jeff
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Liu <jeff.liu@oracle.com>
To: Christoph Hellwig <hch@infradead.org>
Cc: jfs-discussion@lists.sourceforge.net, jiri@resnulli.us,
gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
"xfs@oss.sgi.com" <xfs@oss.sgi.com>,
cluster-devel@redhat.com, linux-mtd@lists.infradead.org,
oleg@redhat.com, akpm@linux-foundation.org
Subject: Re: [PATCH 0/6] list: introduce list_last_entry_or_null()
Date: Sat, 16 Nov 2013 00:00:55 +0800 [thread overview]
Message-ID: <52864537.3040800@oracle.com> (raw)
In-Reply-To: <20131115141100.GA17659@infradead.org>
On 11/15 2013 22:11, Christoph Hellwig wrote:
> On Fri, Nov 15, 2013 at 12:29:48PM +0800, Jeff Liu wrote:
>> Hi Folks,
>>
>> This patch is trying to introduce a new list helper to retrieve the
>> last entry or return NULL if the list is empty corresponding to it,
>> which is inspired by Jiri Pirko's list_first_entry_or_null().
>
> How did we end up with the stupid _or_null prefix there? I think the
> functionality is useful, but the naming is way to verbose, especially
> given that a list_first_entry or list_last_entry that optimizes away
> that one check doesn't seem useful.
> Instead of encoding detailed semantics in the name a good kerneldoc
> comment is way better.
When it comes to this point, looks the name is really a bit verbose.
And yes, they have the same kernel doc to list_first_entry/list_last_entry.
But at rculist.h, we have another similar routine with this suffix, i.e,
list_fist_or_null_rcu().
Maybe we can figure out a better name and replace the existing code with it
as list_first_entry_or_null() has not yet been widely used, it mainly being
used in drivers code as per a grep against linux-next tree.
$ grep list_first_entry_or_null -r linux-next
./drivers/acpi/acpi_ipmi.c: driver_data.selected_smi = list_first_entry_or_null(
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/net/team/team.c: port = list_first_entry_or_null(&team->port_list,
./drivers/net/ethernet/sfc/mcdi.c: async = list_first_entry_or_null(
./drivers/net/ethernet/intel/i40e/i40e_main.c: return list_first_entry_or_null(&vsi->mac_filter_list,
./drivers/net/vxlan.c: rd = list_first_entry_or_null(&f->remotes, struct vxlan_rdst, list);
./drivers/of/irq.c: desc = list_first_entry_or_null(&intc_parent_list,
./fs/xfs/xfs_trans_priv.h: return list_first_entry_or_null(&ailp->xa_ail, struct xfs_log_item,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
Thanks,
-Jeff
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Liu <jeff.liu@oracle.com>
To: Christoph Hellwig <hch@infradead.org>
Cc: jfs-discussion@lists.sourceforge.net, jiri@resnulli.us,
gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
"xfs@oss.sgi.com" <xfs@oss.sgi.com>,
cluster-devel@redhat.com, linux-mtd@lists.infradead.org,
oleg@redhat.com, akpm@linux-foundation.org
Subject: Re: [PATCH 0/6] list: introduce list_last_entry_or_null()
Date: Sat, 16 Nov 2013 00:00:55 +0800 [thread overview]
Message-ID: <52864537.3040800@oracle.com> (raw)
In-Reply-To: <20131115141100.GA17659@infradead.org>
On 11/15 2013 22:11, Christoph Hellwig wrote:
> On Fri, Nov 15, 2013 at 12:29:48PM +0800, Jeff Liu wrote:
>> Hi Folks,
>>
>> This patch is trying to introduce a new list helper to retrieve the
>> last entry or return NULL if the list is empty corresponding to it,
>> which is inspired by Jiri Pirko's list_first_entry_or_null().
>
> How did we end up with the stupid _or_null prefix there? I think the
> functionality is useful, but the naming is way to verbose, especially
> given that a list_first_entry or list_last_entry that optimizes away
> that one check doesn't seem useful.
> Instead of encoding detailed semantics in the name a good kerneldoc
> comment is way better.
When it comes to this point, looks the name is really a bit verbose.
And yes, they have the same kernel doc to list_first_entry/list_last_entry.
But at rculist.h, we have another similar routine with this suffix, i.e,
list_fist_or_null_rcu().
Maybe we can figure out a better name and replace the existing code with it
as list_first_entry_or_null() has not yet been widely used, it mainly being
used in drivers code as per a grep against linux-next tree.
$ grep list_first_entry_or_null -r linux-next
./drivers/acpi/acpi_ipmi.c: driver_data.selected_smi = list_first_entry_or_null(
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/net/team/team.c: port = list_first_entry_or_null(&team->port_list,
./drivers/net/ethernet/sfc/mcdi.c: async = list_first_entry_or_null(
./drivers/net/ethernet/intel/i40e/i40e_main.c: return list_first_entry_or_null(&vsi->mac_filter_list,
./drivers/net/vxlan.c: rd = list_first_entry_or_null(&f->remotes, struct vxlan_rdst, list);
./drivers/of/irq.c: desc = list_first_entry_or_null(&intc_parent_list,
./fs/xfs/xfs_trans_priv.h: return list_first_entry_or_null(&ailp->xa_ail, struct xfs_log_item,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
Thanks,
-Jeff
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Liu <jeff.liu@oracle.com>
To: Christoph Hellwig <hch@infradead.org>
Cc: linux-kernel@vger.kernel.org,
jfs-discussion@lists.sourceforge.net, jiri@resnulli.us,
gregkh@linuxfoundation.org, oleg@redhat.com,
"xfs@oss.sgi.com" <xfs@oss.sgi.com>,
cluster-devel@redhat.com, linux-mtd@lists.infradead.org,
akpm@linux-foundation.org
Subject: Re: [PATCH 0/6] list: introduce list_last_entry_or_null()
Date: Sat, 16 Nov 2013 00:00:55 +0800 [thread overview]
Message-ID: <52864537.3040800@oracle.com> (raw)
In-Reply-To: <20131115141100.GA17659@infradead.org>
On 11/15 2013 22:11, Christoph Hellwig wrote:
> On Fri, Nov 15, 2013 at 12:29:48PM +0800, Jeff Liu wrote:
>> Hi Folks,
>>
>> This patch is trying to introduce a new list helper to retrieve the
>> last entry or return NULL if the list is empty corresponding to it,
>> which is inspired by Jiri Pirko's list_first_entry_or_null().
>
> How did we end up with the stupid _or_null prefix there? I think the
> functionality is useful, but the naming is way to verbose, especially
> given that a list_first_entry or list_last_entry that optimizes away
> that one check doesn't seem useful.
> Instead of encoding detailed semantics in the name a good kerneldoc
> comment is way better.
When it comes to this point, looks the name is really a bit verbose.
And yes, they have the same kernel doc to list_first_entry/list_last_entry.
But at rculist.h, we have another similar routine with this suffix, i.e,
list_fist_or_null_rcu().
Maybe we can figure out a better name and replace the existing code with it
as list_first_entry_or_null() has not yet been widely used, it mainly being
used in drivers code as per a grep against linux-next tree.
$ grep list_first_entry_or_null -r linux-next
./drivers/acpi/acpi_ipmi.c: driver_data.selected_smi = list_first_entry_or_null(
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/base/regmap/regmap.c: async = list_first_entry_or_null(&map->async_free,
./drivers/net/team/team.c: port = list_first_entry_or_null(&team->port_list,
./drivers/net/ethernet/sfc/mcdi.c: async = list_first_entry_or_null(
./drivers/net/ethernet/intel/i40e/i40e_main.c: return list_first_entry_or_null(&vsi->mac_filter_list,
./drivers/net/vxlan.c: rd = list_first_entry_or_null(&f->remotes, struct vxlan_rdst, list);
./drivers/of/irq.c: desc = list_first_entry_or_null(&intc_parent_list,
./fs/xfs/xfs_trans_priv.h: return list_first_entry_or_null(&ailp->xa_ail, struct xfs_log_item,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
./net/nfc/digital_core.c: cmd = list_first_entry_or_null(&ddev->cmd_queue, struct digital_cmd,
Thanks,
-Jeff
next prev parent reply other threads:[~2013-11-15 16:00 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 4:29 [Cluster-devel] [PATCH 0/6] list: introduce list_last_entry_or_null() Jeff Liu
2013-11-15 4:29 ` Jeff Liu
2013-11-15 4:29 ` Jeff Liu
2013-11-15 4:29 ` Jeff Liu
2013-11-15 14:11 ` [Cluster-devel] " Christoph Hellwig
2013-11-15 14:11 ` Christoph Hellwig
2013-11-15 14:11 ` Christoph Hellwig
2013-11-15 14:11 ` Christoph Hellwig
2013-11-15 14:26 ` [Cluster-devel] " Steven Whitehouse
2013-11-15 14:26 ` Steven Whitehouse
2013-11-15 14:26 ` Steven Whitehouse
2013-11-15 14:26 ` Steven Whitehouse
2013-11-15 16:00 ` Jeff Liu [this message]
2013-11-15 16:00 ` Jeff Liu
2013-11-15 16:00 ` Jeff Liu
2013-11-15 16:00 ` Jeff Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52864537.3040800@oracle.com \
--to=jeff.liu@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.