[RFC 00/23] OMAP4: big endian support and fixes

[RFC 00/23] OMAP4: big endian support and fixes

[Taras Kondratiuk]

This series is a split up of Victor's initial BE series for Pandaboard.

The first 20 patches are trivial replacement of __raw_xxx functions
with xxx_relaxed endian neutral variant.
Patches #1-#16 covers OMAP drivers in 'drivers' and 'sound' directories.
Patch #17 covers 'mach-omap2' directory. Initially I've split
it into 10+ separate patches, but it didn't look like a good idea.
Patches #18-#20 covers 'plat-omap'. Some code here most probably won't
be used in BE mode (like debug-leds for OMAP1 boards), but changes
are made anyway to remove __raw_xxx() functions completely from
'mach-omap2' and 'plat-omap'. This will simplify future grep'ing for
new __raw_xxx() entries.

Patch #21 fixes LE data handling in assembler code.
Patch #22 switches CPU to BE after it returns from ROM code.
And the last one marks OMAP4 as BE ready.

Based on rmk/for-next commit fb95742a4a4f69323950d6d8f68bcb48c947b91f
Tested on Pandaboard (OMAP4430 and OMAP4460 variants).

Victor Kamensky (23):
  gpio/omap: raw read and write endian fix
  watchdog: omap_wdt: raw read and write endian fix
  OMAPDSS: raw read and write endian fix
  mmc: omap: raw read and write endian fix
  i2c: omap: raw read and write endian fix
  drivers: bus: omap_l3: raw read and write endian fix
  hwrng: omap - raw read and write endian fix
  crypto: omap-aes - raw read and write endian fix
  crypto: omap-sham - raw read and write endian fix
  Input: omap-keypad - raw read and write endian fix
  mfd: omap-usb-host: raw read and write endian fix
  mfd: omap-usb-tll: raw read and write endian fix
  spi: omap2-mcspi: raw read and write endian fix
  USB: ehci-omap: raw read and write endian fix
  usb: musb: raw read and write endian fix
  ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix
  ARM: OMAP2+: raw read and write endian fix
  ARM: OMAP: dmtimer: raw read and write endian fix
  ARM: OMAP: counter-32k: raw read and write endian fix
  ARM: OMAP: debug-leds: raw read and write endian fix
  ARM: OMAP4: sleep: byteswap data for big-endian
  ARM: OMAP4: sleep/smp: switch CPU to BE if compiled for BE
  ARM: OMAP4: enable big endian support

 arch/arm/mach-omap2/Kconfig               |    1 +
 arch/arm/mach-omap2/board-flash.c         |    4 +-
 arch/arm/mach-omap2/clkt2xxx_dpllcore.c   |    2 +-
 arch/arm/mach-omap2/clkt2xxx_osc.c        |    8 +-
 arch/arm/mach-omap2/clkt2xxx_sys.c        |    2 +-
 arch/arm/mach-omap2/clkt_clksel.c         |   10 +-
 arch/arm/mach-omap2/clkt_dpll.c           |    6 +-
 arch/arm/mach-omap2/clkt_iclk.c           |    8 +-
 arch/arm/mach-omap2/clock.c               |   16 +--
 arch/arm/mach-omap2/clock36xx.c           |    6 +-
 arch/arm/mach-omap2/cm2xxx_3xxx.h         |    4 +-
 arch/arm/mach-omap2/cm33xx.c              |    4 +-
 arch/arm/mach-omap2/cm3xxx.c              |    8 +-
 arch/arm/mach-omap2/cm44xx.c              |    8 +-
 arch/arm/mach-omap2/cminst44xx.c          |    4 +-
 arch/arm/mach-omap2/control.c             |   20 +--
 arch/arm/mach-omap2/dma.c                 |    4 +-
 arch/arm/mach-omap2/dpll3xxx.c            |   32 ++---
 arch/arm/mach-omap2/dpll44xx.c            |   12 +-
 arch/arm/mach-omap2/gpmc.c                |    8 +-
 arch/arm/mach-omap2/id.c                  |    2 +-
 arch/arm/mach-omap2/irq.c                 |    4 +-
 arch/arm/mach-omap2/mux.c                 |    8 +-
 arch/arm/mach-omap2/omap-headsmp.S        |   13 ++
 arch/arm/mach-omap2/omap-hotplug.c        |    4 +-
 arch/arm/mach-omap2/omap-mpuss-lowpower.c |   18 +--
 arch/arm/mach-omap2/omap-smp.c            |    4 +-
 arch/arm/mach-omap2/omap-wakeupgen.c      |   42 +++----
 arch/arm/mach-omap2/omap4-common.c        |   16 +--
 arch/arm/mach-omap2/omap_hwmod.c          |   10 +-
 arch/arm/mach-omap2/omap_phy_internal.c   |    6 +-
 arch/arm/mach-omap2/prcm_mpu44xx.c        |    4 +-
 arch/arm/mach-omap2/prm2xxx.h             |    2 +-
 arch/arm/mach-omap2/prm2xxx_3xxx.h        |    4 +-
 arch/arm/mach-omap2/prm33xx.c             |    4 +-
 arch/arm/mach-omap2/prm3xxx.h             |    2 +-
 arch/arm/mach-omap2/prm44xx.c             |    4 +-
 arch/arm/mach-omap2/prminst44xx.c         |    4 +-
 arch/arm/mach-omap2/sdrc.h                |    8 +-
 arch/arm/mach-omap2/sdrc2xxx.c            |    4 +-
 arch/arm/mach-omap2/sleep44xx.S           |   23 ++++
 arch/arm/mach-omap2/sr_device.c           |    2 +-
 arch/arm/mach-omap2/sram.c                |   16 +--
 arch/arm/mach-omap2/timer.c               |    8 +-
 arch/arm/mach-omap2/vc.c                  |    4 +-
 arch/arm/mach-omap2/wd_timer.c            |    8 +-
 arch/arm/plat-omap/counter_32k.c          |    6 +-
 arch/arm/plat-omap/debug-leds.c           |   14 +--
 arch/arm/plat-omap/dmtimer.c              |    8 +-
 arch/arm/plat-omap/include/plat/dmtimer.h |   16 +--
 drivers/bus/omap_l3_noc.c                 |    8 +-
 drivers/char/hw_random/omap-rng.c         |    4 +-
 drivers/crypto/omap-aes.c                 |    8 +-
 drivers/crypto/omap-sham.c                |    4 +-
 drivers/gpio/gpio-omap.c                  |  188 ++++++++++++++---------------
 drivers/i2c/busses/i2c-omap.c             |    6 +-
 drivers/input/keyboard/omap4-keypad.c     |   10 +-
 drivers/mfd/omap-usb-host.c               |    8 +-
 drivers/mfd/omap-usb-tll.c                |    8 +-
 drivers/mmc/host/omap.c                   |    4 +-
 drivers/mmc/host/omap_hsmmc.c             |    4 +-
 drivers/spi/spi-omap2-mcspi.c             |   38 +++---
 drivers/usb/host/ehci-omap.c              |    4 +-
 drivers/usb/musb/musb_io.h                |   18 +--
 drivers/video/omap2/dss/dispc.c           |    4 +-
 drivers/video/omap2/dss/dsi.c             |    4 +-
 drivers/video/omap2/dss/dss.c             |    4 +-
 drivers/video/omap2/dss/rfbi.c            |   16 +--
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    4 +-
 drivers/video/omap2/dss/venc.c            |    4 +-
 drivers/video/omap2/omapfb/omapfb-main.c  |   10 +-
 drivers/video/omap2/vrfb.c                |    6 +-
 drivers/watchdog/omap_wdt.c               |   36 +++---
 sound/soc/omap/mcbsp.c                    |   12 +-
 sound/soc/omap/omap-dmic.c                |    4 +-
 sound/soc/omap/omap-mcpdm.c               |    4 +-
 76 files changed, 446 insertions(+), 409 deletions(-)

-- 
1.7.9.5

[RFC 01/23] gpio/omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/gpio/gpio-omap.c |  188 +++++++++++++++++++++++-----------------------
 1 file changed, 94 insertions(+), 94 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 89675f8..8f4ad0f 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -108,12 +108,12 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	u32 l;
 
 	reg += bank->regs->direction;
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (is_input)
 		l |= 1 << gpio;
 	else
 		l &= ~(1 << gpio);
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 	bank->context.oe = l;
 }
 
@@ -132,7 +132,7 @@ static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
 		bank->context.dataout &= ~l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 /* set data out value using mask register */
@@ -142,12 +142,12 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
 	u32 gpio_bit = GPIO_BIT(bank, gpio);
 	u32 l;
 
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (enable)
 		l |= gpio_bit;
 	else
 		l &= ~gpio_bit;
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 	bank->context.dataout = l;
 }
 
@@ -155,26 +155,26 @@ static int _get_gpio_datain(struct gpio_bank *bank, int offset)
 {
 	void __iomem *reg = bank->base + bank->regs->datain;
 
-	return (__raw_readl(reg) & (1 << offset)) != 0;
+	return (readl_relaxed(reg) & (1 << offset)) != 0;
 }
 
 static int _get_gpio_dataout(struct gpio_bank *bank, int offset)
 {
 	void __iomem *reg = bank->base + bank->regs->dataout;
 
-	return (__raw_readl(reg) & (1 << offset)) != 0;
+	return (readl_relaxed(reg) & (1 << offset)) != 0;
 }
 
 static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
 {
-	int l = __raw_readl(base + reg);
+	int l = readl_relaxed(base + reg);
 
 	if (set)
 		l |= mask;
 	else
 		l &= ~mask;
 
-	__raw_writel(l, base + reg);
+	writel_relaxed(l, base + reg);
 }
 
 static inline void _gpio_dbck_enable(struct gpio_bank *bank)
@@ -183,7 +183,7 @@ static inline void _gpio_dbck_enable(struct gpio_bank *bank)
 		clk_enable(bank->dbck);
 		bank->dbck_enabled = true;
 
-		__raw_writel(bank->dbck_enable_mask,
+		writel_relaxed(bank->dbck_enable_mask,
 			     bank->base + bank->regs->debounce_en);
 	}
 }
@@ -196,7 +196,7 @@ static inline void _gpio_dbck_disable(struct gpio_bank *bank)
 		 * enabled but the clock is not, GPIO module seems to be unable
 		 * to detect events and generate interrupts at least on OMAP3.
 		 */
-		__raw_writel(0, bank->base + bank->regs->debounce_en);
+		writel_relaxed(0, bank->base + bank->regs->debounce_en);
 
 		clk_disable(bank->dbck);
 		bank->dbck_enabled = false;
@@ -233,10 +233,10 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	clk_enable(bank->dbck);
 	reg = bank->base + bank->regs->debounce;
-	__raw_writel(debounce, reg);
+	writel_relaxed(debounce, reg);
 
 	reg = bank->base + bank->regs->debounce_en;
-	val = __raw_readl(reg);
+	val = readl_relaxed(reg);
 
 	if (debounce)
 		val |= l;
@@ -244,7 +244,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 		val &= ~l;
 	bank->dbck_enable_mask = val;
 
-	__raw_writel(val, reg);
+	writel_relaxed(val, reg);
 	clk_disable(bank->dbck);
 	/*
 	 * Enable debounce clock per module.
@@ -283,12 +283,12 @@ static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
 
 	bank->dbck_enable_mask &= ~gpio_bit;
 	bank->context.debounce_en &= ~gpio_bit;
-	__raw_writel(bank->context.debounce_en,
+        writel_relaxed(bank->context.debounce_en,
 		     bank->base + bank->regs->debounce_en);
 
 	if (!bank->dbck_enable_mask) {
 		bank->context.debounce = 0;
-		__raw_writel(bank->context.debounce, bank->base +
+		writel_relaxed(bank->context.debounce, bank->base +
 			     bank->regs->debounce);
 		clk_disable(bank->dbck);
 		bank->dbck_enabled = false;
@@ -311,18 +311,18 @@ static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
 		  trigger & IRQ_TYPE_EDGE_FALLING);
 
 	bank->context.leveldetect0 =
-			__raw_readl(bank->base + bank->regs->leveldetect0);
+			readl_relaxed(bank->base + bank->regs->leveldetect0);
 	bank->context.leveldetect1 =
-			__raw_readl(bank->base + bank->regs->leveldetect1);
+			readl_relaxed(bank->base + bank->regs->leveldetect1);
 	bank->context.risingdetect =
-			__raw_readl(bank->base + bank->regs->risingdetect);
+			readl_relaxed(bank->base + bank->regs->risingdetect);
 	bank->context.fallingdetect =
-			__raw_readl(bank->base + bank->regs->fallingdetect);
+			readl_relaxed(bank->base + bank->regs->fallingdetect);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
 	}
 
 	/* This part needs to be executed always for OMAP{34xx, 44xx} */
@@ -347,8 +347,8 @@ static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
 
 exit:
 	bank->level_mask =
-		__raw_readl(bank->base + bank->regs->leveldetect0) |
-		__raw_readl(bank->base + bank->regs->leveldetect1);
+		readl_relaxed(bank->base + bank->regs->leveldetect0) |
+		readl_relaxed(bank->base + bank->regs->leveldetect1);
 }
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -366,13 +366,13 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	reg += bank->regs->irqctrl;
 
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if ((l >> gpio) & 1)
 		l &= ~(1 << gpio);
 	else
 		l |= 1 << gpio;
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 #else
 static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
@@ -390,7 +390,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 	} else if (bank->regs->irqctrl) {
 		reg += bank->regs->irqctrl;
 
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
@@ -400,7 +400,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 		else
 			return -EINVAL;
 
-		__raw_writel(l, reg);
+		writel_relaxed(l, reg);
 	} else if (bank->regs->edgectrl1) {
 		if (gpio & 0x08)
 			reg += bank->regs->edgectrl2;
@@ -408,7 +408,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 			reg += bank->regs->edgectrl1;
 
 		gpio &= 0x07;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		l &= ~(3 << (gpio << 1));
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
@@ -418,8 +418,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
 		/* Enable wake-up during idle for dynamic tick */
 		_gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
-		__raw_writel(l, reg);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
+		writel_relaxed(l, reg);
 	}
 	return 0;
 }
@@ -430,17 +430,17 @@ static void _enable_gpio_module(struct gpio_bank *bank, unsigned offset)
 		void __iomem *reg = bank->base + bank->regs->pinctrl;
 
 		/* Claim the pin for MPU */
-		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
+		writel_relaxed(readl_relaxed(reg) | (1 << offset), reg);
 	}
 
 	if (bank->regs->ctrl && !BANK_USED(bank)) {
 		void __iomem *reg = bank->base + bank->regs->ctrl;
 		u32 ctrl;
 
-		ctrl = __raw_readl(reg);
+		ctrl = readl_relaxed(reg);
 		/* Module is enabled, clocks are not gated */
 		ctrl &= ~GPIO_MOD_CTRL_BIT;
-		__raw_writel(ctrl, reg);
+		writel_relaxed(ctrl, reg);
 		bank->context.ctrl = ctrl;
 	}
 }
@@ -455,17 +455,17 @@ static void _disable_gpio_module(struct gpio_bank *bank, unsigned offset)
 		/* Disable wake-up during idle for dynamic tick */
 		_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
 		bank->context.wake_en =
-			__raw_readl(bank->base + bank->regs->wkup_en);
+			readl_relaxed(bank->base + bank->regs->wkup_en);
 	}
 
 	if (bank->regs->ctrl && !BANK_USED(bank)) {
 		void __iomem *reg = bank->base + bank->regs->ctrl;
 		u32 ctrl;
 
-		ctrl = __raw_readl(reg);
+		ctrl = readl_relaxed(reg);
 		/* Module is disabled, clocks are gated */
 		ctrl |= GPIO_MOD_CTRL_BIT;
-		__raw_writel(ctrl, reg);
+		writel_relaxed(ctrl, reg);
 		bank->context.ctrl = ctrl;
 	}
 }
@@ -474,7 +474,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 {
 	void __iomem *reg = bank->base + bank->regs->direction;
 
-	return __raw_readl(reg) & mask;
+	return readl_relaxed(reg) & mask;
 }
 
 static int gpio_irq_type(struct irq_data *d, unsigned type)
@@ -530,16 +530,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	void __iomem *reg = bank->base;
 
 	reg += bank->regs->irqstatus;
-	__raw_writel(gpio_mask, reg);
+	writel_relaxed(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 	if (bank->regs->irqstatus2) {
 		reg = bank->base + bank->regs->irqstatus2;
-		__raw_writel(gpio_mask, reg);
+		writel_relaxed(gpio_mask, reg);
 	}
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
-	__raw_readl(reg);
+	readl_relaxed(reg);
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -554,7 +554,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 	u32 mask = (1 << bank->width) - 1;
 
 	reg += bank->regs->irqenable;
-	l = __raw_readl(reg);
+	l = readl_relaxed(reg);
 	if (bank->regs->irqenable_inv)
 		l = ~l;
 	l &= mask;
@@ -572,7 +572,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		bank->context.irqenable1 |= gpio_mask;
 	} else {
 		reg += bank->regs->irqenable;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if (bank->regs->irqenable_inv)
 			l &= ~gpio_mask;
 		else
@@ -580,7 +580,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		bank->context.irqenable1 = l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
@@ -594,7 +594,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		bank->context.irqenable1 &= ~gpio_mask;
 	} else {
 		reg += bank->regs->irqenable;
-		l = __raw_readl(reg);
+		l = readl_relaxed(reg);
 		if (bank->regs->irqenable_inv)
 			l |= gpio_mask;
 		else
@@ -602,7 +602,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		bank->context.irqenable1 = l;
 	}
 
-	__raw_writel(l, reg);
+	writel_relaxed(l, reg);
 }
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
@@ -638,7 +638,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 	else
 		bank->context.wake_en &= ~gpio_bit;
 
-	__raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
+	writel_relaxed(bank->context.wake_en, bank->base + bank->regs->wkup_en);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -740,7 +740,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		u32 enabled;
 
 		enabled = _get_gpio_irqbank_mask(bank);
-		isr_saved = isr = __raw_readl(isr_reg) & enabled;
+		isr_saved = isr = readl_relaxed(isr_reg) & enabled;
 
 		if (bank->level_mask)
 			level_mask = bank->level_mask & enabled;
@@ -874,7 +874,7 @@ static int omap_mpuio_suspend_noirq(struct device *dev)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
+	writel_relaxed(0xffff & ~bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -889,7 +889,7 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(bank->context.wake_en, mask_reg);
+	writel_relaxed(bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1011,7 +1011,7 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank)
 	if (called || bank->regs->revision == USHRT_MAX)
 		return;
 
-	rev = __raw_readw(bank->base + bank->regs->revision);
+	rev = readw_relaxed(bank->base + bank->regs->revision);
 	pr_info("OMAP GPIO hardware version %d.%d\n",
 		(rev >> 4) & 0x0f, rev & 0x0f);
 
@@ -1032,20 +1032,20 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
 		l = 0xffff;
 
 	if (bank->is_mpuio) {
-		__raw_writel(l, bank->base + bank->regs->irqenable);
+		writel_relaxed(l, bank->base + bank->regs->irqenable);
 		return;
 	}
 
 	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
 	_gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv);
 	if (bank->regs->debounce_en)
-		__raw_writel(0, base + bank->regs->debounce_en);
+		writel_relaxed(0, base + bank->regs->debounce_en);
 
 	/* Save OE default value (0xffffffff) in the context */
-	bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
+	bank->context.oe = readl_relaxed(bank->base + bank->regs->direction);
 	 /* Initialize interface clk ungated, module enabled */
 	if (bank->regs->ctrl)
-		__raw_writel(0, base + bank->regs->ctrl);
+		writel_relaxed(0, base + bank->regs->ctrl);
 
 	bank->dbck = clk_get(bank->dev, "dbclk");
 	if (IS_ERR(bank->dbck))
@@ -1282,11 +1282,11 @@ static int omap_gpio_runtime_suspend(struct device *dev)
 	 */
 	wake_low = bank->context.leveldetect0 & bank->context.wake_en;
 	if (wake_low)
-		__raw_writel(wake_low | bank->context.fallingdetect,
+		writel_relaxed(wake_low | bank->context.fallingdetect,
 			     bank->base + bank->regs->fallingdetect);
 	wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
 	if (wake_hi)
-		__raw_writel(wake_hi | bank->context.risingdetect,
+		writel_relaxed(wake_hi | bank->context.risingdetect,
 			     bank->base + bank->regs->risingdetect);
 
 	if (!bank->enabled_non_wakeup_gpios)
@@ -1301,7 +1301,7 @@ static int omap_gpio_runtime_suspend(struct device *dev)
 	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
 	 * generated.  See OMAP2420 Errata item 1.101.
 	 */
-	bank->saved_datain = __raw_readl(bank->base +
+	bank->saved_datain = readl_relaxed(bank->base +
 						bank->regs->datain);
 	l1 = bank->context.fallingdetect;
 	l2 = bank->context.risingdetect;
@@ -1309,8 +1309,8 @@ static int omap_gpio_runtime_suspend(struct device *dev)
 	l1 &= ~bank->enabled_non_wakeup_gpios;
 	l2 &= ~bank->enabled_non_wakeup_gpios;
 
-	__raw_writel(l1, bank->base + bank->regs->fallingdetect);
-	__raw_writel(l2, bank->base + bank->regs->risingdetect);
+	writel_relaxed(l1, bank->base + bank->regs->fallingdetect);
+	writel_relaxed(l2, bank->base + bank->regs->risingdetect);
 
 	bank->workaround_enabled = true;
 
@@ -1358,9 +1358,9 @@ static int omap_gpio_runtime_resume(struct device *dev)
 	 * generate a PRCM wakeup.  Here we restore the
 	 * pre-runtime_suspend() values for edge triggering.
 	 */
-	__raw_writel(bank->context.fallingdetect,
+	writel_relaxed(bank->context.fallingdetect,
 		     bank->base + bank->regs->fallingdetect);
-	__raw_writel(bank->context.risingdetect,
+	writel_relaxed(bank->context.risingdetect,
 		     bank->base + bank->regs->risingdetect);
 
 	if (bank->loses_context) {
@@ -1382,7 +1382,7 @@ static int omap_gpio_runtime_resume(struct device *dev)
 		return 0;
 	}
 
-	l = __raw_readl(bank->base + bank->regs->datain);
+	l = readl_relaxed(bank->base + bank->regs->datain);
 
 	/*
 	 * Check if any of the non-wakeup interrupt GPIOs have changed
@@ -1412,24 +1412,24 @@ static int omap_gpio_runtime_resume(struct device *dev)
 	if (gen) {
 		u32 old0, old1;
 
-		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
-		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
+		old0 = readl_relaxed(bank->base + bank->regs->leveldetect0);
+		old1 = readl_relaxed(bank->base + bank->regs->leveldetect1);
 
 		if (!bank->regs->irqstatus_raw0) {
-			__raw_writel(old0 | gen, bank->base +
+			writel_relaxed(old0 | gen, bank->base +
 						bank->regs->leveldetect0);
-			__raw_writel(old1 | gen, bank->base +
+			writel_relaxed(old1 | gen, bank->base +
 						bank->regs->leveldetect1);
 		}
 
 		if (bank->regs->irqstatus_raw0) {
-			__raw_writel(old0 | l, bank->base +
+			writel_relaxed(old0 | l, bank->base +
 						bank->regs->leveldetect0);
-			__raw_writel(old1 | l, bank->base +
+			writel_relaxed(old1 | l, bank->base +
 						bank->regs->leveldetect1);
 		}
-		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
-		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
+		writel_relaxed(old0, bank->base + bank->regs->leveldetect0);
+		writel_relaxed(old1, bank->base + bank->regs->leveldetect1);
 	}
 
 	bank->workaround_enabled = false;
@@ -1471,55 +1471,55 @@ static void omap_gpio_init_context(struct gpio_bank *p)
 	struct omap_gpio_reg_offs *regs = p->regs;
 	void __iomem *base = p->base;
 
-	p->context.ctrl		= __raw_readl(base + regs->ctrl);
-	p->context.oe		= __raw_readl(base + regs->direction);
-	p->context.wake_en	= __raw_readl(base + regs->wkup_en);
-	p->context.leveldetect0	= __raw_readl(base + regs->leveldetect0);
-	p->context.leveldetect1	= __raw_readl(base + regs->leveldetect1);
-	p->context.risingdetect	= __raw_readl(base + regs->risingdetect);
-	p->context.fallingdetect = __raw_readl(base + regs->fallingdetect);
-	p->context.irqenable1	= __raw_readl(base + regs->irqenable);
-	p->context.irqenable2	= __raw_readl(base + regs->irqenable2);
+	p->context.ctrl		= readl_relaxed(base + regs->ctrl);
+	p->context.oe		= readl_relaxed(base + regs->direction);
+	p->context.wake_en	= readl_relaxed(base + regs->wkup_en);
+	p->context.leveldetect0	= readl_relaxed(base + regs->leveldetect0);
+	p->context.leveldetect1	= readl_relaxed(base + regs->leveldetect1);
+	p->context.risingdetect	= readl_relaxed(base + regs->risingdetect);
+	p->context.fallingdetect = readl_relaxed(base + regs->fallingdetect);
+	p->context.irqenable1	= readl_relaxed(base + regs->irqenable);
+	p->context.irqenable2	= readl_relaxed(base + regs->irqenable2);
 
 	if (regs->set_dataout && p->regs->clr_dataout)
-		p->context.dataout = __raw_readl(base + regs->set_dataout);
+		p->context.dataout = readl_relaxed(base + regs->set_dataout);
 	else
-		p->context.dataout = __raw_readl(base + regs->dataout);
+		p->context.dataout = readl_relaxed(base + regs->dataout);
 
 	p->context_valid = true;
 }
 
 static void omap_gpio_restore_context(struct gpio_bank *bank)
 {
-	__raw_writel(bank->context.wake_en,
+	writel_relaxed(bank->context.wake_en,
 				bank->base + bank->regs->wkup_en);
-	__raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
-	__raw_writel(bank->context.leveldetect0,
+	writel_relaxed(bank->context.ctrl, bank->base + bank->regs->ctrl);
+	writel_relaxed(bank->context.leveldetect0,
 				bank->base + bank->regs->leveldetect0);
-	__raw_writel(bank->context.leveldetect1,
+	writel_relaxed(bank->context.leveldetect1,
 				bank->base + bank->regs->leveldetect1);
-	__raw_writel(bank->context.risingdetect,
+	writel_relaxed(bank->context.risingdetect,
 				bank->base + bank->regs->risingdetect);
-	__raw_writel(bank->context.fallingdetect,
+	writel_relaxed(bank->context.fallingdetect,
 				bank->base + bank->regs->fallingdetect);
 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
-		__raw_writel(bank->context.dataout,
+		writel_relaxed(bank->context.dataout,
 				bank->base + bank->regs->set_dataout);
 	else
-		__raw_writel(bank->context.dataout,
+		writel_relaxed(bank->context.dataout,
 				bank->base + bank->regs->dataout);
-	__raw_writel(bank->context.oe, bank->base + bank->regs->direction);
+	writel_relaxed(bank->context.oe, bank->base + bank->regs->direction);
 
 	if (bank->dbck_enable_mask) {
-		__raw_writel(bank->context.debounce, bank->base +
+		writel_relaxed(bank->context.debounce, bank->base +
 					bank->regs->debounce);
-		__raw_writel(bank->context.debounce_en,
+		writel_relaxed(bank->context.debounce_en,
 					bank->base + bank->regs->debounce_en);
 	}
 
-	__raw_writel(bank->context.irqenable1,
+	writel_relaxed(bank->context.irqenable1,
 				bank->base + bank->regs->irqenable);
-	__raw_writel(bank->context.irqenable2,
+	writel_relaxed(bank->context.irqenable2,
 				bank->base + bank->regs->irqenable2);
 }
 #endif /* CONFIG_PM_RUNTIME */
-- 
1.7.9.5

[RFC 02/23] watchdog: omap_wdt: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/watchdog/omap_wdt.c |   36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index af88ffd..2ff7bff 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -68,14 +68,14 @@ static void omap_wdt_reload(struct omap_wdt_dev *wdev)
 	void __iomem    *base = wdev->base;
 
 	/* wait for posted write to complete */
-	while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08)
 		cpu_relax();
 
 	wdev->wdt_trgr_pattern = ~wdev->wdt_trgr_pattern;
-	__raw_writel(wdev->wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR));
+	writel_relaxed(wdev->wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR));
 
 	/* wait for posted write to complete */
-	while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x08)
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08)
 		cpu_relax();
 	/* reloaded WCRR from WLDR */
 }
@@ -85,12 +85,12 @@ static void omap_wdt_enable(struct omap_wdt_dev *wdev)
 	void __iomem *base = wdev->base;
 
 	/* Sequence to enable the watchdog */
-	__raw_writel(0xBBBB, base + OMAP_WATCHDOG_SPR);
-	while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
+	writel_relaxed(0xBBBB, base + OMAP_WATCHDOG_SPR);
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10)
 		cpu_relax();
 
-	__raw_writel(0x4444, base + OMAP_WATCHDOG_SPR);
-	while ((__raw_readl(base + OMAP_WATCHDOG_WPS)) & 0x10)
+	writel_relaxed(0x4444, base + OMAP_WATCHDOG_SPR);
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10)
 		cpu_relax();
 }
 
@@ -99,12 +99,12 @@ static void omap_wdt_disable(struct omap_wdt_dev *wdev)
 	void __iomem *base = wdev->base;
 
 	/* sequence required to disable watchdog */
-	__raw_writel(0xAAAA, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
+	writel_relaxed(0xAAAA, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10)
 		cpu_relax();
 
-	__raw_writel(0x5555, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x10)
+	writel_relaxed(0x5555, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10)
 		cpu_relax();
 }
 
@@ -115,11 +115,11 @@ static void omap_wdt_set_timer(struct omap_wdt_dev *wdev,
 	void __iomem *base = wdev->base;
 
 	/* just count up at 32 KHz */
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04)
 		cpu_relax();
 
-	__raw_writel(pre_margin, base + OMAP_WATCHDOG_LDR);
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x04)
+	writel_relaxed(pre_margin, base + OMAP_WATCHDOG_LDR);
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04)
 		cpu_relax();
 }
 
@@ -135,11 +135,11 @@ static int omap_wdt_start(struct watchdog_device *wdog)
 	pm_runtime_get_sync(wdev->dev);
 
 	/* initialize prescaler */
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01)
 		cpu_relax();
 
-	__raw_writel((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL);
-	while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
+	writel_relaxed((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL);
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01)
 		cpu_relax();
 
 	omap_wdt_set_timer(wdev, wdog->timeout);
@@ -275,7 +275,7 @@ static int omap_wdt_probe(struct platform_device *pdev)
 	}
 
 	pr_info("OMAP Watchdog Timer Rev 0x%02x: initial timeout %d sec\n",
-		__raw_readl(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
+		readl_relaxed(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
 		omap_wdt->timeout);
 
 	pm_runtime_put_sync(wdev->dev);
-- 
1.7.9.5

[RFC 03/23] OMAPDSS: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/video/omap2/dss/dispc.c           |    4 ++--
 drivers/video/omap2/dss/dsi.c             |    4 ++--
 drivers/video/omap2/dss/dss.c             |    4 ++--
 drivers/video/omap2/dss/rfbi.c            |   16 ++++++++--------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    4 ++--
 drivers/video/omap2/dss/venc.c            |    4 ++--
 drivers/video/omap2/omapfb/omapfb-main.c  |   10 +++++-----
 drivers/video/omap2/vrfb.c                |    6 +++---
 8 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4779750..87a3682 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -228,12 +228,12 @@ static unsigned long dispc_plane_lclk_rate(enum omap_plane plane);
 
 static inline void dispc_write_reg(const u16 idx, u32 val)
 {
-	__raw_writel(val, dispc.base + idx);
+	writel_relaxed(val, dispc.base + idx);
 }
 
 static inline u32 dispc_read_reg(const u16 idx)
 {
-	return __raw_readl(dispc.base + idx);
+	return readl_relaxed(dispc.base + idx);
 }
 
 static u32 mgr_fld_read(enum omap_channel channel, enum mgr_reg_fields regfld)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index a598b58..c5af3fa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -414,7 +414,7 @@ static inline void dsi_write_reg(struct platform_device *dsidev,
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	__raw_writel(val, dsi->base + idx.idx);
+	writel_relaxed(val, dsi->base + idx.idx);
 }
 
 static inline u32 dsi_read_reg(struct platform_device *dsidev,
@@ -422,7 +422,7 @@ static inline u32 dsi_read_reg(struct platform_device *dsidev,
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	return __raw_readl(dsi->base + idx.idx);
+	return readl_relaxed(dsi->base + idx.idx);
 }
 
 static void dsi_bus_lock(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index bd01608..e53f663 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -104,12 +104,12 @@ static const char * const dss_generic_clk_source_names[] = {
 
 static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 {
-	__raw_writel(val, dss.base + idx.idx);
+	writel_relaxed(val, dss.base + idx.idx);
 }
 
 static inline u32 dss_read_reg(const struct dss_reg idx)
 {
-	return __raw_readl(dss.base + idx.idx);
+	return readl_relaxed(dss.base + idx.idx);
 }
 
 #define SR(reg) \
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index c8a81a2..7772e33 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -122,12 +122,12 @@ static struct {
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
 {
-	__raw_writel(val, rfbi.base + idx.idx);
+	writel_relaxed(val, rfbi.base + idx.idx);
 }
 
 static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
 {
-	return __raw_readl(rfbi.base + idx.idx);
+	return readl_relaxed(rfbi.base + idx.idx);
 }
 
 static int rfbi_runtime_get(void)
@@ -263,8 +263,8 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
 				const u8 __iomem *b = (const u8 __iomem *)pd;
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+1));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+0));
 				++pd;
 			}
 			pd += horiz_offset;
@@ -277,9 +277,9 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
 				const u8 __iomem *b = (const u8 __iomem *)pd;
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+2));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+1));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+0));
 				++pd;
 			}
 			pd += horiz_offset;
@@ -291,7 +291,7 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
-				rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
+				rfbi_write_reg(RFBI_PARAM, readw_relaxed(pd));
 				++pd;
 			}
 			pd += horiz_offset;
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 3dfe009..59936fa 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -43,13 +43,13 @@
 static inline void hdmi_write_reg(void __iomem *base_addr,
 				const u16 idx, u32 val)
 {
-	__raw_writel(val, base_addr + idx);
+	writel_relaxed(val, base_addr + idx);
 }
 
 static inline u32 hdmi_read_reg(void __iomem *base_addr,
 				const u16 idx)
 {
-	return __raw_readl(base_addr + idx);
+	return readl_relaxed(base_addr + idx);
 }
 
 static inline void __iomem *hdmi_wp_base(struct hdmi_ip_data *ip_data)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 5f88ac4..74e6973 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -309,12 +309,12 @@ static struct {
 
 static inline void venc_write_reg(int idx, u32 val)
 {
-	__raw_writel(val, venc.base + idx);
+	writel_relaxed(val, venc.base + idx);
 }
 
 static inline u32 venc_read_reg(int idx)
 {
-	u32 l = __raw_readl(venc.base + idx);
+	u32 l = readl_relaxed(venc.base + idx);
 	return l;
 }
 
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 27d6905..f7a347c 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -82,18 +82,18 @@ static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
 		g = g * 64 / 256;
 		b = b * 32 / 256;
 
-		__raw_writew((r << 11) | (g << 5) | (b << 0), p);
+		writew_relaxed((r << 11) | (g << 5) | (b << 0), p);
 	} else if (var->bits_per_pixel = 24) {
 		u8 __iomem *p = (u8 __iomem *)addr;
 		p += (y * line_len + x) * 3;
 
-		__raw_writeb(b, p + 0);
-		__raw_writeb(g, p + 1);
-		__raw_writeb(r, p + 2);
+		writeb_relaxed(b, p + 0);
+		writeb_relaxed(g, p + 1);
+		writeb_relaxed(r, p + 2);
 	} else if (var->bits_per_pixel = 32) {
 		u32 __iomem *p = (u32 __iomem *)addr;
 		p += y * line_len + x;
-		__raw_writel(color, p);
+		writel_relaxed(color, p);
 	}
 }
 
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index f346b02..0324690 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -82,17 +82,17 @@ static bool vrfb_loaded;
 
 static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_CONTROL(ctx));
 }
 
 static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_SIZE(ctx));
 }
 
 static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
 }
 
 static inline void restore_hw_context(int ctx)
-- 
1.7.9.5

[RFC 03/23] OMAPDSS: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/video/omap2/dss/dispc.c           |    4 ++--
 drivers/video/omap2/dss/dsi.c             |    4 ++--
 drivers/video/omap2/dss/dss.c             |    4 ++--
 drivers/video/omap2/dss/rfbi.c            |   16 ++++++++--------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    4 ++--
 drivers/video/omap2/dss/venc.c            |    4 ++--
 drivers/video/omap2/omapfb/omapfb-main.c  |   10 +++++-----
 drivers/video/omap2/vrfb.c                |    6 +++---
 8 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4779750..87a3682 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -228,12 +228,12 @@ static unsigned long dispc_plane_lclk_rate(enum omap_plane plane);
 
 static inline void dispc_write_reg(const u16 idx, u32 val)
 {
-	__raw_writel(val, dispc.base + idx);
+	writel_relaxed(val, dispc.base + idx);
 }
 
 static inline u32 dispc_read_reg(const u16 idx)
 {
-	return __raw_readl(dispc.base + idx);
+	return readl_relaxed(dispc.base + idx);
 }
 
 static u32 mgr_fld_read(enum omap_channel channel, enum mgr_reg_fields regfld)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index a598b58..c5af3fa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -414,7 +414,7 @@ static inline void dsi_write_reg(struct platform_device *dsidev,
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	__raw_writel(val, dsi->base + idx.idx);
+	writel_relaxed(val, dsi->base + idx.idx);
 }
 
 static inline u32 dsi_read_reg(struct platform_device *dsidev,
@@ -422,7 +422,7 @@ static inline u32 dsi_read_reg(struct platform_device *dsidev,
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	return __raw_readl(dsi->base + idx.idx);
+	return readl_relaxed(dsi->base + idx.idx);
 }
 
 static void dsi_bus_lock(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index bd01608..e53f663 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -104,12 +104,12 @@ static const char * const dss_generic_clk_source_names[] = {
 
 static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 {
-	__raw_writel(val, dss.base + idx.idx);
+	writel_relaxed(val, dss.base + idx.idx);
 }
 
 static inline u32 dss_read_reg(const struct dss_reg idx)
 {
-	return __raw_readl(dss.base + idx.idx);
+	return readl_relaxed(dss.base + idx.idx);
 }
 
 #define SR(reg) \
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index c8a81a2..7772e33 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -122,12 +122,12 @@ static struct {
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
 {
-	__raw_writel(val, rfbi.base + idx.idx);
+	writel_relaxed(val, rfbi.base + idx.idx);
 }
 
 static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
 {
-	return __raw_readl(rfbi.base + idx.idx);
+	return readl_relaxed(rfbi.base + idx.idx);
 }
 
 static int rfbi_runtime_get(void)
@@ -263,8 +263,8 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
 				const u8 __iomem *b = (const u8 __iomem *)pd;
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+1));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+0));
 				++pd;
 			}
 			pd += horiz_offset;
@@ -277,9 +277,9 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
 				const u8 __iomem *b = (const u8 __iomem *)pd;
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
-				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+2));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+1));
+				rfbi_write_reg(RFBI_PARAM, readb_relaxed(b+0));
 				++pd;
 			}
 			pd += horiz_offset;
@@ -291,7 +291,7 @@ static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
 
 		for (; h; --h) {
 			for (i = 0; i < w; ++i) {
-				rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
+				rfbi_write_reg(RFBI_PARAM, readw_relaxed(pd));
 				++pd;
 			}
 			pd += horiz_offset;
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 3dfe009..59936fa 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -43,13 +43,13 @@
 static inline void hdmi_write_reg(void __iomem *base_addr,
 				const u16 idx, u32 val)
 {
-	__raw_writel(val, base_addr + idx);
+	writel_relaxed(val, base_addr + idx);
 }
 
 static inline u32 hdmi_read_reg(void __iomem *base_addr,
 				const u16 idx)
 {
-	return __raw_readl(base_addr + idx);
+	return readl_relaxed(base_addr + idx);
 }
 
 static inline void __iomem *hdmi_wp_base(struct hdmi_ip_data *ip_data)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 5f88ac4..74e6973 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -309,12 +309,12 @@ static struct {
 
 static inline void venc_write_reg(int idx, u32 val)
 {
-	__raw_writel(val, venc.base + idx);
+	writel_relaxed(val, venc.base + idx);
 }
 
 static inline u32 venc_read_reg(int idx)
 {
-	u32 l = __raw_readl(venc.base + idx);
+	u32 l = readl_relaxed(venc.base + idx);
 	return l;
 }
 
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 27d6905..f7a347c 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -82,18 +82,18 @@ static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
 		g = g * 64 / 256;
 		b = b * 32 / 256;
 
-		__raw_writew((r << 11) | (g << 5) | (b << 0), p);
+		writew_relaxed((r << 11) | (g << 5) | (b << 0), p);
 	} else if (var->bits_per_pixel == 24) {
 		u8 __iomem *p = (u8 __iomem *)addr;
 		p += (y * line_len + x) * 3;
 
-		__raw_writeb(b, p + 0);
-		__raw_writeb(g, p + 1);
-		__raw_writeb(r, p + 2);
+		writeb_relaxed(b, p + 0);
+		writeb_relaxed(g, p + 1);
+		writeb_relaxed(r, p + 2);
 	} else if (var->bits_per_pixel == 32) {
 		u32 __iomem *p = (u32 __iomem *)addr;
 		p += y * line_len + x;
-		__raw_writel(color, p);
+		writel_relaxed(color, p);
 	}
 }
 
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index f346b02..0324690 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -82,17 +82,17 @@ static bool vrfb_loaded;
 
 static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_CONTROL(ctx));
 }
 
 static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_SIZE(ctx));
 }
 
 static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
 {
-	__raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+	writel_relaxed(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
 }
 
 static inline void restore_hw_context(int ctx)
-- 
1.7.9.5

[RFC 04/23] mmc: omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/mmc/host/omap.c       |    4 ++--
 drivers/mmc/host/omap_hsmmc.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index b94f38e..ef2d088 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -79,8 +79,8 @@
 #define mmc_omap2()	(!mmc_omap1())
 
 #define OMAP_MMC_REG(host, reg)		(OMAP_MMC_REG_##reg << (host)->reg_shift)
-#define OMAP_MMC_READ(host, reg)	__raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
-#define OMAP_MMC_WRITE(host, reg, val)	__raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
+#define OMAP_MMC_READ(host, reg)        readw_relaxed((host)->virt_base + OMAP_MMC_REG(host, reg))
+#define OMAP_MMC_WRITE(host, reg, val)	writew_relaxed((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
 
 /*
  * Command types
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..fbbbfc0 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -135,10 +135,10 @@
  * MMC Host controller read/write API's
  */
 #define OMAP_HSMMC_READ(base, reg)	\
-	__raw_readl((base) + OMAP_HSMMC_##reg)
+	readl_relaxed((base) + OMAP_HSMMC_##reg)
 
 #define OMAP_HSMMC_WRITE(base, reg, val) \
-	__raw_writel((val), (base) + OMAP_HSMMC_##reg)
+	writel_relaxed((val), (base) + OMAP_HSMMC_##reg)
 
 struct omap_hsmmc_next {
 	unsigned int	dma_len;
-- 
1.7.9.5

[RFC 05/23] i2c: omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/i2c/busses/i2c-omap.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 9967a6f..d69826e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -1142,7 +1142,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
 	 * raw_readw is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
 	dev->scheme = OMAP_I2C_SCHEME(rev);
 	switch (dev->scheme) {
-- 
1.7.9.5

[RFC 05/23] i2c: omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/i2c/busses/i2c-omap.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 9967a6f..d69826e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -1142,7 +1142,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
 	 * raw_readw is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
 	dev->scheme = OMAP_I2C_SCHEME(rev);
 	switch (dev->scheme) {
-- 
1.7.9.5

[RFC 06/23] drivers: bus: omap_l3: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/bus/omap_l3_noc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index feeecae..82de7a5 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -72,7 +72,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 		 * to determine the source
 		 */
 		base = l3->l3_base[i];
-		err_reg = __raw_readl(base + l3_flagmux[i] +
+		err_reg = readl_relaxed(base + l3_flagmux[i] +
 					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
 
 		/* Get the corresponding error and analyse */
@@ -82,9 +82,9 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 
 			/* Read the stderrlog_main_source from clk domain */
 			l3_targ_base = base + *(l3_targ[i] + err_src);
-			std_err_main =  __raw_readl(l3_targ_base +
+			std_err_main =  readl_relaxed(l3_targ_base +
 					L3_TARG_STDERRLOG_MAIN);
-			masterid = __raw_readl(l3_targ_base +
+			masterid = readl_relaxed(l3_targ_base +
 					L3_TARG_STDERRLOG_MSTADDR);
 
 			switch (std_err_main & CUSTOM_ERROR) {
@@ -93,7 +93,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 					l3_targ_inst_name[i][err_src];
 				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
 					target_name,
-					__raw_readl(l3_targ_base +
+					readl_relaxed(l3_targ_base +
 						L3_TARG_STDERRLOG_SLVOFSLSB));
 				/* clear the std error log*/
 				clear = std_err_main | CLEAR_STDERR_LOG;
-- 
1.7.9.5

[RFC 07/23] hwrng: omap - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/char/hw_random/omap-rng.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 9b89ff4..d68cf8a 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -131,13 +131,13 @@ struct omap_rng_dev {
 
 static inline u32 omap_rng_read(struct omap_rng_dev *priv, u16 reg)
 {
-	return __raw_readl(priv->base + priv->pdata->regs[reg]);
+	return readl_relaxed(priv->base + priv->pdata->regs[reg]);
 }
 
 static inline void omap_rng_write(struct omap_rng_dev *priv, u16 reg,
 				      u32 val)
 {
-	__raw_writel(val, priv->base + priv->pdata->regs[reg]);
+	writel_relaxed(val, priv->base + priv->pdata->regs[reg]);
 }
 
 static int omap_rng_data_present(struct hwrng *rng, int wait)
-- 
1.7.9.5

[RFC 07/23] hwrng: omap - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/char/hw_random/omap-rng.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 9b89ff4..d68cf8a 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -131,13 +131,13 @@ struct omap_rng_dev {
 
 static inline u32 omap_rng_read(struct omap_rng_dev *priv, u16 reg)
 {
-	return __raw_readl(priv->base + priv->pdata->regs[reg]);
+	return readl_relaxed(priv->base + priv->pdata->regs[reg]);
 }
 
 static inline void omap_rng_write(struct omap_rng_dev *priv, u16 reg,
 				      u32 val)
 {
-	__raw_writel(val, priv->base + priv->pdata->regs[reg]);
+	writel_relaxed(val, priv->base + priv->pdata->regs[reg]);
 }
 
 static int omap_rng_data_present(struct hwrng *rng, int wait)
-- 
1.7.9.5

[RFC 08/23] crypto: omap-aes - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/crypto/omap-aes.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index ce791c2..777ae0a 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -195,7 +195,7 @@ static DEFINE_SPINLOCK(list_lock);
 #define omap_aes_read(dd, offset)				\
 ({								\
 	int _read_ret;						\
-	_read_ret = __raw_readl(dd->io_base + offset);		\
+	_read_ret = readl_relaxed(dd->io_base + offset);		\
 	pr_debug("omap_aes_read(" #offset "=%#x)= %#x\n",	\
 		 offset, _read_ret);				\
 	_read_ret;						\
@@ -203,7 +203,7 @@ static DEFINE_SPINLOCK(list_lock);
 #else
 static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset)
 {
-	return __raw_readl(dd->io_base + offset);
+	return readl_relaxed(dd->io_base + offset);
 }
 #endif
 
@@ -212,13 +212,13 @@ static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset)
 	do {								\
 		pr_debug("omap_aes_write(" #offset "=%#x) value=%#x\n",	\
 			 offset, value);				\
-		__raw_writel(value, dd->io_base + offset);		\
+		writel_relaxed(value, dd->io_base + offset);		\
 	} while (0)
 #else
 static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset,
 				  u32 value)
 {
-	__raw_writel(value, dd->io_base + offset);
+	writel_relaxed(value, dd->io_base + offset);
 }
 #endif
 
-- 
1.7.9.5

[RFC 08/23] crypto: omap-aes - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/crypto/omap-aes.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index ce791c2..777ae0a 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -195,7 +195,7 @@ static DEFINE_SPINLOCK(list_lock);
 #define omap_aes_read(dd, offset)				\
 ({								\
 	int _read_ret;						\
-	_read_ret = __raw_readl(dd->io_base + offset);		\
+	_read_ret = readl_relaxed(dd->io_base + offset);		\
 	pr_debug("omap_aes_read(" #offset "=%#x)= %#x\n",	\
 		 offset, _read_ret);				\
 	_read_ret;						\
@@ -203,7 +203,7 @@ static DEFINE_SPINLOCK(list_lock);
 #else
 static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset)
 {
-	return __raw_readl(dd->io_base + offset);
+	return readl_relaxed(dd->io_base + offset);
 }
 #endif
 
@@ -212,13 +212,13 @@ static inline u32 omap_aes_read(struct omap_aes_dev *dd, u32 offset)
 	do {								\
 		pr_debug("omap_aes_write(" #offset "=%#x) value=%#x\n",	\
 			 offset, value);				\
-		__raw_writel(value, dd->io_base + offset);		\
+		writel_relaxed(value, dd->io_base + offset);		\
 	} while (0)
 #else
 static inline void omap_aes_write(struct omap_aes_dev *dd, u32 offset,
 				  u32 value)
 {
-	__raw_writel(value, dd->io_base + offset);
+	writel_relaxed(value, dd->io_base + offset);
 }
 #endif
 
-- 
1.7.9.5

[RFC 09/23] crypto: omap-sham - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/crypto/omap-sham.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 8bdde57..b011b97 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -244,13 +244,13 @@ static struct omap_sham_drv sham = {
 
 static inline u32 omap_sham_read(struct omap_sham_dev *dd, u32 offset)
 {
-	return __raw_readl(dd->io_base + offset);
+	return readl_relaxed(dd->io_base + offset);
 }
 
 static inline void omap_sham_write(struct omap_sham_dev *dd,
 					u32 offset, u32 value)
 {
-	__raw_writel(value, dd->io_base + offset);
+	writel_relaxed(value, dd->io_base + offset);
 }
 
 static inline void omap_sham_write_mask(struct omap_sham_dev *dd, u32 address,
-- 
1.7.9.5

[RFC 09/23] crypto: omap-sham - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/crypto/omap-sham.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 8bdde57..b011b97 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -244,13 +244,13 @@ static struct omap_sham_drv sham = {
 
 static inline u32 omap_sham_read(struct omap_sham_dev *dd, u32 offset)
 {
-	return __raw_readl(dd->io_base + offset);
+	return readl_relaxed(dd->io_base + offset);
 }
 
 static inline void omap_sham_write(struct omap_sham_dev *dd,
 					u32 offset, u32 value)
 {
-	__raw_writel(value, dd->io_base + offset);
+	writel_relaxed(value, dd->io_base + offset);
 }
 
 static inline void omap_sham_write_mask(struct omap_sham_dev *dd, u32 address,
-- 
1.7.9.5

[RFC 10/23] Input: omap-keypad - raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/input/keyboard/omap4-keypad.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 30acfd4..952a2eb 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -89,26 +89,26 @@ struct omap4_keypad {
 
 static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
 {
-	return __raw_readl(keypad_data->base +
+	return readl_relaxed(keypad_data->base +
 				keypad_data->reg_offset + offset);
 }
 
 static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
 {
-	__raw_writel(value,
+	writel_relaxed(value,
 		     keypad_data->base + keypad_data->reg_offset + offset);
 }
 
 static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
 {
-	return __raw_readl(keypad_data->base +
+	return readl_relaxed(keypad_data->base +
 				keypad_data->irqreg_offset + offset);
 }
 
 static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
 			     u32 offset, u32 value)
 {
-	__raw_writel(value,
+	writel_relaxed(value,
 		     keypad_data->base + keypad_data->irqreg_offset + offset);
 }
 
@@ -312,7 +312,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
 		goto err_unmap;
 	}
-	rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+	rev = readl_relaxed(keypad_data->base + OMAP4_KBD_REVISION);
 	rev &= 0x03 << 30;
 	rev >>= 30;
 	switch (rev) {
-- 
1.7.9.5

[RFC 11/23] mfd: omap-usb-host: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/mfd/omap-usb-host.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 29ee54d..3b34de1 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -121,22 +121,22 @@ static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 
 static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
 {
-	__raw_writel(val, base + reg);
+	writel_relaxed(val, base + reg);
 }
 
 static inline u32 usbhs_read(void __iomem *base, u32 reg)
 {
-	return __raw_readl(base + reg);
+	return readl_relaxed(base + reg);
 }
 
 static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
 {
-	__raw_writeb(val, base + reg);
+	writeb_relaxed(val, base + reg);
 }
 
 static inline u8 usbhs_readb(void __iomem *base, u8 reg)
 {
-	return __raw_readb(base + reg);
+	return readb_relaxed(base + reg);
 }
 
 /*-------------------------------------------------------------------------*/
-- 
1.7.9.5

[RFC 12/23] mfd: omap-usb-tll: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/mfd/omap-usb-tll.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index e59ac4c..15bcd93 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -121,22 +121,22 @@ static DEFINE_SPINLOCK(tll_lock);	/* serialize access to tll_dev */
 
 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
 {
-	__raw_writel(val, base + reg);
+	writel_relaxed(val, base + reg);
 }
 
 static inline u32 usbtll_read(void __iomem *base, u32 reg)
 {
-	return __raw_readl(base + reg);
+	return readl_relaxed(base + reg);
 }
 
 static inline void usbtll_writeb(void __iomem *base, u8 reg, u8 val)
 {
-	__raw_writeb(val, base + reg);
+	writeb_relaxed(val, base + reg);
 }
 
 static inline u8 usbtll_readb(void __iomem *base, u8 reg)
 {
-	return __raw_readb(base + reg);
+	return readb_relaxed(base + reg);
 }
 
 /*-------------------------------------------------------------------------*/
-- 
1.7.9.5

[RFC 13/23] spi: omap2-mcspi: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/spi/spi-omap2-mcspi.c |   38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index ed4af47..c9471b7 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -157,14 +157,14 @@ static inline void mcspi_write_reg(struct spi_master *master,
 {
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
 
-	__raw_writel(val, mcspi->base + idx);
+	writel_relaxed(val, mcspi->base + idx);
 }
 
 static inline u32 mcspi_read_reg(struct spi_master *master, int idx)
 {
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
 
-	return __raw_readl(mcspi->base + idx);
+	return readl_relaxed(mcspi->base + idx);
 }
 
 static inline void mcspi_write_cs_reg(const struct spi_device *spi,
@@ -172,14 +172,14 @@ static inline void mcspi_write_cs_reg(const struct spi_device *spi,
 {
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
 
-	__raw_writel(val, cs->base +  idx);
+	writel_relaxed(val, cs->base +  idx);
 }
 
 static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx)
 {
 	struct omap2_mcspi_cs	*cs = spi->controller_state;
 
-	return __raw_readl(cs->base + idx);
+	return readl_relaxed(cs->base + idx);
 }
 
 static inline u32 mcspi_cached_chconf0(const struct spi_device *spi)
@@ -332,7 +332,7 @@ static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi)
 	mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
 
 	list_for_each_entry(cs, &ctx->cs, node)
-		__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+		writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 }
 
 static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
@@ -340,9 +340,9 @@ static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
 	unsigned long timeout;
 
 	timeout = jiffies + msecs_to_jiffies(1000);
-	while (!(__raw_readl(reg) & bit)) {
+	while (!(readl_relaxed(reg) & bit)) {
 		if (time_after(jiffies, timeout)) {
-			if (!(__raw_readl(reg) & bit))
+			if (!(readl_relaxed(reg) & bit))
 				return -ETIMEDOUT;
 			else
 				return 0;
@@ -669,7 +669,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				}
 				dev_vdbg(&spi->dev, "write-%d %02x\n",
 						word_len, *tx);
-				__raw_writel(*tx++, tx_reg);
+				writel_relaxed(*tx++, tx_reg);
 			}
 			if (rx != NULL) {
 				if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -681,7 +681,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				if (c == 1 && tx == NULL &&
 				    (l & OMAP2_MCSPI_CHCONF_TURBO)) {
 					omap2_mcspi_set_enable(spi, 0);
-					*rx++ = __raw_readl(rx_reg);
+					*rx++ = readl_relaxed(rx_reg);
 					dev_vdbg(&spi->dev, "read-%d %02x\n",
 						    word_len, *(rx - 1));
 					if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -695,7 +695,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 					omap2_mcspi_set_enable(spi, 0);
 				}
 
-				*rx++ = __raw_readl(rx_reg);
+				*rx++ = readl_relaxed(rx_reg);
 				dev_vdbg(&spi->dev, "read-%d %02x\n",
 						word_len, *(rx - 1));
 			}
@@ -716,7 +716,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				}
 				dev_vdbg(&spi->dev, "write-%d %04x\n",
 						word_len, *tx);
-				__raw_writel(*tx++, tx_reg);
+				writel_relaxed(*tx++, tx_reg);
 			}
 			if (rx != NULL) {
 				if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -728,7 +728,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				if (c == 2 && tx == NULL &&
 				    (l & OMAP2_MCSPI_CHCONF_TURBO)) {
 					omap2_mcspi_set_enable(spi, 0);
-					*rx++ = __raw_readl(rx_reg);
+					*rx++ = readl_relaxed(rx_reg);
 					dev_vdbg(&spi->dev, "read-%d %04x\n",
 						    word_len, *(rx - 1));
 					if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -742,7 +742,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 					omap2_mcspi_set_enable(spi, 0);
 				}
 
-				*rx++ = __raw_readl(rx_reg);
+				*rx++ = readl_relaxed(rx_reg);
 				dev_vdbg(&spi->dev, "read-%d %04x\n",
 						word_len, *(rx - 1));
 			}
@@ -763,7 +763,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				}
 				dev_vdbg(&spi->dev, "write-%d %08x\n",
 						word_len, *tx);
-				__raw_writel(*tx++, tx_reg);
+				writel_relaxed(*tx++, tx_reg);
 			}
 			if (rx != NULL) {
 				if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -775,7 +775,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 				if (c == 4 && tx == NULL &&
 				    (l & OMAP2_MCSPI_CHCONF_TURBO)) {
 					omap2_mcspi_set_enable(spi, 0);
-					*rx++ = __raw_readl(rx_reg);
+					*rx++ = readl_relaxed(rx_reg);
 					dev_vdbg(&spi->dev, "read-%d %08x\n",
 						    word_len, *(rx - 1));
 					if (mcspi_wait_for_reg_bit(chstat_reg,
@@ -789,7 +789,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 					omap2_mcspi_set_enable(spi, 0);
 				}
 
-				*rx++ = __raw_readl(rx_reg);
+				*rx++ = readl_relaxed(rx_reg);
 				dev_vdbg(&spi->dev, "read-%d %08x\n",
 						word_len, *(rx - 1));
 			}
@@ -1101,7 +1101,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 
 			/* RX_ONLY mode needs dummy data in TX reg */
 			if (t->tx_buf == NULL)
-				__raw_writel(0, cs->base
+				writel_relaxed(0, cs->base
 						+ OMAP2_MCSPI_TX0);
 
 			if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
@@ -1465,9 +1465,9 @@ static int omap2_mcspi_resume(struct device *dev)
 			 * change in account.
 			 */
 			cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
-			__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 			cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
-			__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 		}
 	}
 	pm_runtime_mark_last_busy(mcspi->dev);
-- 
1.7.9.5

[RFC 14/23] USB: ehci-omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/usb/host/ehci-omap.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 6fa82d6..803e706 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -73,12 +73,12 @@ struct omap_hcd {
 
 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
 {
-	__raw_writel(val, base + reg);
+	writel_relaxed(val, base + reg);
 }
 
 static inline u32 ehci_read(void __iomem *base, u32 reg)
 {
-	return __raw_readl(base + reg);
+	return readl_relaxed(base + reg);
 }
 
 /* configure so an HC device and id are always provided */
-- 
1.7.9.5

[RFC 15/23] usb: musb: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/usb/musb/musb_io.h |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index eebeed7..76f4d2a 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -42,17 +42,17 @@
 /* NOTE:  these offsets are all in bytes */
 
 static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-	{ return __raw_readw(addr + offset); }
+	{ return readw_relaxed(addr + offset); }
 
 static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
-	{ return __raw_readl(addr + offset); }
+	{ return readl_relaxed(addr + offset); }
 
 
 static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
-	{ __raw_writew(data, addr + offset); }
+	{ writew_relaxed(data, addr + offset); }
 
 static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
-	{ __raw_writel(data, addr + offset); }
+	{ writel_relaxed(data, addr + offset); }
 
 
 #if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
@@ -65,7 +65,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
 	u16 tmp;
 	u8 val;
 
-	tmp = __raw_readw(addr + (offset & ~1));
+	tmp = readw_relaxed(addr + (offset & ~1));
 	if (offset & 1)
 		val = (tmp >> 8);
 	else
@@ -78,22 +78,22 @@ static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 {
 	u16 tmp;
 
-	tmp = __raw_readw(addr + (offset & ~1));
+	tmp = readw_relaxed(addr + (offset & ~1));
 	if (offset & 1)
 		tmp = (data << 8) | (tmp & 0xff);
 	else
 		tmp = (tmp & 0xff00) | data;
 
-	__raw_writew(tmp, addr + (offset & ~1));
+	writew_relaxed(tmp, addr + (offset & ~1));
 }
 
 #else
 
 static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
-	{ return __raw_readb(addr + offset); }
+	{ return readb_relaxed(addr + offset); }
 
 static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-	{ __raw_writeb(data, addr + offset); }
+	{ writeb_relaxed(data, addr + offset); }
 
 #endif	/* CONFIG_USB_MUSB_TUSB6010 */
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC 15/23] usb: musb: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 drivers/usb/musb/musb_io.h |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index eebeed7..76f4d2a 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -42,17 +42,17 @@
 /* NOTE:  these offsets are all in bytes */
 
 static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
-	{ return __raw_readw(addr + offset); }
+	{ return readw_relaxed(addr + offset); }
 
 static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
-	{ return __raw_readl(addr + offset); }
+	{ return readl_relaxed(addr + offset); }
 
 
 static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
-	{ __raw_writew(data, addr + offset); }
+	{ writew_relaxed(data, addr + offset); }
 
 static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
-	{ __raw_writel(data, addr + offset); }
+	{ writel_relaxed(data, addr + offset); }
 
 
 #if defined(CONFIG_USB_MUSB_TUSB6010) || defined (CONFIG_USB_MUSB_TUSB6010_MODULE)
@@ -65,7 +65,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
 	u16 tmp;
 	u8 val;
 
-	tmp = __raw_readw(addr + (offset & ~1));
+	tmp = readw_relaxed(addr + (offset & ~1));
 	if (offset & 1)
 		val = (tmp >> 8);
 	else
@@ -78,22 +78,22 @@ static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 {
 	u16 tmp;
 
-	tmp = __raw_readw(addr + (offset & ~1));
+	tmp = readw_relaxed(addr + (offset & ~1));
 	if (offset & 1)
 		tmp = (data << 8) | (tmp & 0xff);
 	else
 		tmp = (tmp & 0xff00) | data;
 
-	__raw_writew(tmp, addr + (offset & ~1));
+	writew_relaxed(tmp, addr + (offset & ~1));
 }
 
 #else
 
 static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
-	{ return __raw_readb(addr + offset); }
+	{ return readb_relaxed(addr + offset); }
 
 static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-	{ __raw_writeb(data, addr + offset); }
+	{ writeb_relaxed(data, addr + offset); }
 
 #endif	/* CONFIG_USB_MUSB_TUSB6010 */
 
-- 
1.7.9.5

[RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 sound/soc/omap/mcbsp.c      |   12 ++++++------
 sound/soc/omap/omap-dmic.c  |    4 ++--
 sound/soc/omap/omap-mcpdm.c |    4 ++--
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index 83433fd..86c7538 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -36,10 +36,10 @@ static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 
 	if (mcbsp->pdata->reg_size == 2) {
 		((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
-		__raw_writew((u16)val, addr);
+		writew_relaxed((u16)val, addr);
 	} else {
 		((u32 *)mcbsp->reg_cache)[reg] = val;
-		__raw_writel(val, addr);
+		writel_relaxed(val, addr);
 	}
 }
 
@@ -48,22 +48,22 @@ static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
 	void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
 
 	if (mcbsp->pdata->reg_size == 2) {
-		return !from_cache ? __raw_readw(addr) :
+		return !from_cache ? readw_relaxed(addr) :
 				     ((u16 *)mcbsp->reg_cache)[reg];
 	} else {
-		return !from_cache ? __raw_readl(addr) :
+		return !from_cache ? readl_relaxed(addr) :
 				     ((u32 *)mcbsp->reg_cache)[reg];
 	}
 }
 
 static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 {
-	__raw_writel(val, mcbsp->st_data->io_base_st + reg);
+	writel_relaxed(val, mcbsp->st_data->io_base_st + reg);
 }
 
 static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
 {
-	return __raw_readl(mcbsp->st_data->io_base_st + reg);
+	return readl_relaxed(mcbsp->st_data->io_base_st + reg);
 }
 
 #define MCBSP_READ(mcbsp, reg) \
diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index 12e566b..1bd531d 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -61,12 +61,12 @@ struct omap_dmic {
 
 static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
 {
-	__raw_writel(val, dmic->io_base + reg);
+	writel_relaxed(val, dmic->io_base + reg);
 }
 
 static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg)
 {
-	return __raw_readl(dmic->io_base + reg);
+	return readl_relaxed(dmic->io_base + reg);
 }
 
 static inline void omap_dmic_start(struct omap_dmic *dmic)
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index 90d2a7c..653ba1c 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -74,12 +74,12 @@ struct omap_mcpdm {
 
 static inline void omap_mcpdm_write(struct omap_mcpdm *mcpdm, u16 reg, u32 val)
 {
-	__raw_writel(val, mcpdm->io_base + reg);
+	writel_relaxed(val, mcpdm->io_base + reg);
 }
 
 static inline int omap_mcpdm_read(struct omap_mcpdm *mcpdm, u16 reg)
 {
-	return __raw_readl(mcpdm->io_base + reg);
+	return readl_relaxed(mcpdm->io_base + reg);
 }
 
 #ifdef DEBUG
-- 
1.7.9.5

[RFC 17/23] ARM: OMAP2+: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/mach-omap2/board-flash.c         |    4 +--
 arch/arm/mach-omap2/clkt2xxx_dpllcore.c   |    2 +-
 arch/arm/mach-omap2/clkt2xxx_osc.c        |    8 +++---
 arch/arm/mach-omap2/clkt2xxx_sys.c        |    2 +-
 arch/arm/mach-omap2/clkt_clksel.c         |   10 +++----
 arch/arm/mach-omap2/clkt_dpll.c           |    6 ++---
 arch/arm/mach-omap2/clkt_iclk.c           |    8 +++---
 arch/arm/mach-omap2/clock.c               |   16 +++++------
 arch/arm/mach-omap2/clock36xx.c           |    6 ++---
 arch/arm/mach-omap2/cm2xxx_3xxx.h         |    4 +--
 arch/arm/mach-omap2/cm33xx.c              |    4 +--
 arch/arm/mach-omap2/cm3xxx.c              |    8 +++---
 arch/arm/mach-omap2/cm44xx.c              |    8 +++---
 arch/arm/mach-omap2/cminst44xx.c          |    4 +--
 arch/arm/mach-omap2/control.c             |   20 +++++++-------
 arch/arm/mach-omap2/dma.c                 |    4 +--
 arch/arm/mach-omap2/dpll3xxx.c            |   32 +++++++++++-----------
 arch/arm/mach-omap2/dpll44xx.c            |   12 ++++-----
 arch/arm/mach-omap2/gpmc.c                |    8 +++---
 arch/arm/mach-omap2/id.c                  |    2 +-
 arch/arm/mach-omap2/irq.c                 |    4 +--
 arch/arm/mach-omap2/mux.c                 |    8 +++---
 arch/arm/mach-omap2/omap-hotplug.c        |    4 +--
 arch/arm/mach-omap2/omap-mpuss-lowpower.c |   18 ++++++-------
 arch/arm/mach-omap2/omap-smp.c            |    4 +--
 arch/arm/mach-omap2/omap-wakeupgen.c      |   42 ++++++++++++++---------------
 arch/arm/mach-omap2/omap4-common.c        |   16 +++++------
 arch/arm/mach-omap2/omap_hwmod.c          |   10 +++----
 arch/arm/mach-omap2/omap_phy_internal.c   |    6 ++---
 arch/arm/mach-omap2/prcm_mpu44xx.c        |    4 +--
 arch/arm/mach-omap2/prm2xxx.h             |    2 +-
 arch/arm/mach-omap2/prm2xxx_3xxx.h        |    4 +--
 arch/arm/mach-omap2/prm33xx.c             |    4 +--
 arch/arm/mach-omap2/prm3xxx.h             |    2 +-
 arch/arm/mach-omap2/prm44xx.c             |    4 +--
 arch/arm/mach-omap2/prminst44xx.c         |    4 +--
 arch/arm/mach-omap2/sdrc.h                |    8 +++---
 arch/arm/mach-omap2/sdrc2xxx.c            |    4 +--
 arch/arm/mach-omap2/sr_device.c           |    2 +-
 arch/arm/mach-omap2/sram.c                |   16 +++++------
 arch/arm/mach-omap2/timer.c               |    8 +++---
 arch/arm/mach-omap2/vc.c                  |    4 +--
 arch/arm/mach-omap2/wd_timer.c            |    8 +++---
 43 files changed, 177 insertions(+), 177 deletions(-)

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fc20a61..17ecd8d 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void)
 	if (!fpga_map_addr)
 		return -ENOMEM;
 
-	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+	if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV)))
 		/* we dont have an DEBUG FPGA??? */
 		/* Depend on #defines!! default to strata boot return param */
 		goto unmap;
 
 	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+	cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
 
 	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
 	if (omap_rev() >= OMAP3430_REV_ES1_0)
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index d862010..83933df 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -141,7 +141,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 		if (!dd)
 			return -EINVAL;
 
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg);
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index 19f54d4..0717dff 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -39,9 +39,9 @@ int omap2_enable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(prcm_clksrc_ctrl);
+	pcc = readl_relaxed(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+	writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 
 	return 0;
 }
@@ -57,9 +57,9 @@ void omap2_disable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
-	pcc = __raw_readl(prcm_clksrc_ctrl);
+	pcc = readl_relaxed(prcm_clksrc_ctrl);
 
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+	writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
 unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index f467d07..58dd3a9 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -33,7 +33,7 @@ u32 omap2xxx_get_sysclkdiv(void)
 {
 	u32 div;
 
-	div = __raw_readl(prcm_clksrc_ctrl);
+	div = readl_relaxed(prcm_clksrc_ctrl);
 	div &= OMAP_SYSCLKDIV_MASK;
 	div >>= OMAP_SYSCLKDIV_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 0ec9f6f..7ac0050 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -97,12 +97,12 @@ static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
 {
 	u32 v;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = readl_relaxed(clk->clksel_reg);
 	v &= ~clk->clksel_mask;
 	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
+	writel_relaxed(v, clk->clksel_reg);
 
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+	v = readl_relaxed(clk->clksel_reg); /* OCP barrier */
 }
 
 /**
@@ -204,7 +204,7 @@ static u32 _read_divisor(struct clk_hw_omap *clk)
 	if (!clk->clksel || !clk->clksel_mask)
 		return 0;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = readl_relaxed(clk->clksel_reg);
 	v &= clk->clksel_mask;
 	v >>= __ffs(clk->clksel_mask);
 
@@ -320,7 +320,7 @@ u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
 	WARN((!clk->clksel || !clk->clksel_mask),
 	     "clock: %s: attempt to call on a non-clksel clock", clk_name);
 
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r = readl_relaxed(clk->clksel_reg) & clk->clksel_mask;
 	r >>= __ffs(clk->clksel_mask);
 
 	for (clks = clk->clksel; clks->parent && !found; clks++) {
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 924c230..934e8f0 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -196,7 +196,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 	if (!dd)
 		return -EINVAL;
 
-	v = __raw_readl(dd->control_reg);
+	v = readl_relaxed(dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -243,7 +243,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		return 0;
 
 	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
+	v = readl_relaxed(dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -262,7 +262,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 			return __clk_get_rate(dd->clk_bypass);
 	}
 
-	v = __raw_readl(dd->mult_div1_reg);
+	v = readl_relaxed(dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
 	dpll_div = v & dd->div1_mask;
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index f10eb03..70fe2c1 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -29,9 +29,9 @@ void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
 
 	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = readl_relaxed((__force void __iomem *)r);
 	v |= (1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	writel_relaxed(v, (__force void __iomem *)r);
 }
 
 /* XXX */
@@ -41,9 +41,9 @@ void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
 
 	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
 
-	v = __raw_readl((__force void __iomem *)r);
+	v = readl_relaxed((__force void __iomem *)r);
 	v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
+	writel_relaxed(v, (__force void __iomem *)r);
 }
 
 /* Public data */
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0c38ca9..5e191be 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -105,7 +105,7 @@ static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
 
 	ena = (idlest) ? 0 : mask;
 
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+	omap_test_timeout(((readl_relaxed(reg) & mask) == ena),
 			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
@@ -138,7 +138,7 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 	/* Not all modules have multiple clocks that their IDLEST depends on */
 	if (clk->ops->find_companion) {
 		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+		if (!(readl_relaxed(companion_reg) & (1 << other_bit)))
 			return;
 	}
 
@@ -309,13 +309,13 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	}
 
 	/* FIXME should not have INVERT_ENABLE bit here */
-	v = __raw_readl(clk->enable_reg);
+	v = readl_relaxed(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v &= ~(1 << clk->enable_bit);
 	else
 		v |= (1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	v = __raw_readl(clk->enable_reg); /* OCP barrier */
+	writel_relaxed(v, clk->enable_reg);
+	v = readl_relaxed(clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops && clk->ops->find_idlest)
 		_omap2_module_wait_ready(clk);
@@ -353,12 +353,12 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 		return;
 	}
 
-	v = __raw_readl(clk->enable_reg);
+	v = readl_relaxed(clk->enable_reg);
 	if (clk->flags & INVERT_ENABLE)
 		v |= (1 << clk->enable_bit);
 	else
 		v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
+	writel_relaxed(v, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
 	if (clkdm_control && clk->clkdm)
@@ -454,7 +454,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 
-	v = __raw_readl(clk->enable_reg);
+	v = readl_relaxed(clk->enable_reg);
 
 	if (clk->flags & INVERT_ENABLE)
 		v ^= BIT(clk->enable_bit);
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index bbd6a3f..bdd228a 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -53,15 +53,15 @@ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 
 	/* Restore the dividers */
 	if (!ret) {
-		orig_v = __raw_readl(parent->reg);
+		orig_v = readl_relaxed(parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
 		dummy_v ^= (1 << parent->shift);
-		__raw_writel(dummy_v, parent->reg);
+		writel_relaxed(dummy_v, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->reg);
+		writel_relaxed(orig_v, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index bfbd16f..72928a3 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -52,12 +52,12 @@
 
 static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
 {
-	return __raw_readl(cm_base + module + idx);
+	return readl_relaxed(cm_base + module + idx);
 }
 
 static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
-	__raw_writel(val, cm_base + module + idx);
+	writel_relaxed(val, cm_base + module + idx);
 }
 
 /* Read-modify-write a register in a CM module. Caller must lock */
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 325a515..74a0935 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -50,13 +50,13 @@
 /* Read a register in a CM instance */
 static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
 {
-	return __raw_readl(cm_base + inst + idx);
+	return readl_relaxed(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
 static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
 {
-	__raw_writel(val, cm_base + inst + idx);
+	writel_relaxed(val, cm_base + inst + idx);
 }
 
 /* Read-modify-write a register in CM */
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 9061c30..85d9842 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -388,7 +388,7 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
 	cm_context.iva2_cm_clksel2 =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
-	cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	cm_context.cm_sysconfig = readl_relaxed(OMAP3430_CM_SYSCONFIG);
 	cm_context.sgx_cm_clksel =
 		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
 	cm_context.dss_cm_clksel =
@@ -418,7 +418,7 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
 	cm_context.pll_cm_clken2 =
 		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-	cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	cm_context.cm_polctrl = readl_relaxed(OMAP3430_CM_POLCTRL);
 	cm_context.iva2_cm_fclken =
 		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
 	cm_context.iva2_cm_clken_pll =
@@ -519,7 +519,7 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
 			       CM_CLKSEL2);
-	__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	writel_relaxed(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
 	omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
 			       CM_CLKSEL);
 	omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
@@ -547,7 +547,7 @@ void omap3_cm_restore_context(void)
 			       OMAP3430ES2_CM_CLKSEL5);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
 			       OMAP3430ES2_CM_CLKEN2);
-	__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	writel_relaxed(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
 			       CM_FCLKEN);
 	omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
index 535d66e..30b6d97 100644
--- a/arch/arm/mach-omap2/cm44xx.c
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -30,23 +30,23 @@
 /* Read a register in CM1 */
 u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
+	return readl_relaxed(OMAP44XX_CM1_REGADDR(inst, reg));
 }
 
 /* Write into a register in CM1 */
 void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
+	writel_relaxed(val, OMAP44XX_CM1_REGADDR(inst, reg));
 }
 
 /* Read a register in CM2 */
 u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
+	return readl_relaxed(OMAP44XX_CM2_REGADDR(inst, reg));
 }
 
 /* Write into a register in CM2 */
 void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
+	writel_relaxed(val, OMAP44XX_CM2_REGADDR(inst, reg));
 }
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index f0290f5..c026d3c 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -116,7 +116,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	return __raw_readl(_cm_bases[part] + inst + idx);
+	return readl_relaxed(_cm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a CM instance */
@@ -125,7 +125,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	__raw_writel(val, _cm_bases[part] + inst + idx);
+	writel_relaxed(val, _cm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe..5d91945 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -161,32 +161,32 @@ void __iomem *omap_ctrl_base_get(void)
 
 u8 omap_ctrl_readb(u16 offset)
 {
-	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+	return readb_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u16 omap_ctrl_readw(u16 offset)
 {
-	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+	return readw_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+	return readl_relaxed(OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
 {
-	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+	writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writew(u16 val, u16 offset)
 {
-	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+	writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 void omap_ctrl_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+	writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
 }
 
 /*
@@ -198,12 +198,12 @@ void omap_ctrl_writel(u32 val, u16 offset)
 
 u32 omap4_ctrl_pad_readl(u16 offset)
 {
-	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
+	return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 void omap4_ctrl_pad_writel(u32 val, u16 offset)
 {
-	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
+	writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -232,7 +232,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 	 *
 	 * XXX This should use some omap_ctrl_writel()-type function
 	 */
-	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+	writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
 }
 
 #endif
@@ -295,7 +295,7 @@ void omap3_clear_scratchpad_contents(void)
 	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
-			__raw_writel(0x0, (v_addr + offset));
+			writel_relaxed(0x0, (v_addr + offset));
 		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
 					   OMAP3430_GR_MOD,
 					   OMAP3_PRM_RSTST_OFFSET);
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 49fd0d5..2582ed2 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -98,7 +98,7 @@ static inline void dma_write(u32 val, int reg, int lch)
 
 	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
 	offset = reg_map[reg] + (stride * lch);
-	__raw_writel(val, dma_base + offset);
+	writel_relaxed(val, dma_base + offset);
 }
 
 static inline u32 dma_read(int reg, int lch)
@@ -108,7 +108,7 @@ static inline u32 dma_read(int reg, int lch)
 
 	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
 	offset = reg_map[reg] + (stride * lch);
-	val = __raw_readl(dma_base + offset);
+	val = readl_relaxed(dma_base + offset);
 	return val;
 }
 
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 3a0296c..d3fe570 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -50,10 +50,10 @@ static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
 
 	dd = clk->dpll_data;
 
-	v = __raw_readl(dd->control_reg);
+	v = readl_relaxed(dd->control_reg);
 	v &= ~dd->enable_mask;
 	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
+	writel_relaxed(v, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -69,7 +69,7 @@ static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
 
 	state <<= __ffs(dd->idlest_mask);
 
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
+	while (((readl_relaxed(dd->idlest_reg) & dd->idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -147,7 +147,7 @@ static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
 	state <<= __ffs(dd->idlest_mask);
 
 	/* Check if already locked */
-	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+	if ((readl_relaxed(dd->idlest_reg) & dd->idlest_mask) == state)
 		goto done;
 
 	ai = omap3_dpll_autoidle_read(clk);
@@ -311,14 +311,14 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	 * only since freqsel field is no longer present on other devices.
 	 */
 	if (cpu_is_omap343x()) {
-		v = __raw_readl(dd->control_reg);
+		v = readl_relaxed(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
+		writel_relaxed(v, dd->control_reg);
 	}
 
 	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
+	v = readl_relaxed(dd->mult_div1_reg);
 	v &= ~(dd->mult_mask | dd->div1_mask);
 	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
 	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
@@ -336,11 +336,11 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
-	__raw_writel(v, dd->mult_div1_reg);
+	writel_relaxed(v, dd->mult_div1_reg);
 
 	/* Set 4X multiplier and low-power mode */
 	if (dd->m4xen_mask || dd->lpmode_mask) {
-		v = __raw_readl(dd->control_reg);
+		v = readl_relaxed(dd->control_reg);
 
 		if (dd->m4xen_mask) {
 			if (dd->last_rounded_m4xen)
@@ -356,7 +356,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 				v &= ~dd->lpmode_mask;
 		}
 
-		__raw_writel(v, dd->control_reg);
+		writel_relaxed(v, dd->control_reg);
 	}
 
 	/* We let the clock framework set the other output dividers later */
@@ -554,7 +554,7 @@ u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return -EINVAL;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = readl_relaxed(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -588,10 +588,10 @@ void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	v = __raw_readl(dd->autoidle_reg);
+	v = readl_relaxed(dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	writel_relaxed(v, dd->autoidle_reg);
 
 }
 
@@ -614,10 +614,10 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 	if (!dd->autoidle_reg)
 		return;
 
-	v = __raw_readl(dd->autoidle_reg);
+	v = readl_relaxed(dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
+	writel_relaxed(v, dd->autoidle_reg);
 
 }
 
@@ -660,7 +660,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 
 	WARN_ON(!dd->enable_mask);
 
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v = readl_relaxed(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
 		rate = parent_rate;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index d28b0f7..9562383 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -42,7 +42,7 @@ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = readl_relaxed(clk->clksel_reg);
 	v &= mask;
 	v >>= __ffs(mask);
 
@@ -61,10 +61,10 @@ void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = readl_relaxed(clk->clksel_reg);
 	/* Clear the bit to allow gatectrl */
 	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
+	writel_relaxed(v, clk->clksel_reg);
 }
 
 void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
@@ -79,10 +79,10 @@ void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
 			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
 			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
 
-	v = __raw_readl(clk->clksel_reg);
+	v = readl_relaxed(clk->clksel_reg);
 	/* Set the bit to deny gatectrl */
 	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
+	writel_relaxed(v, clk->clksel_reg);
 }
 
 const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
@@ -140,7 +140,7 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
 	rate = omap2_get_dpll_rate(clk);
 
 	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
+	v = readl_relaxed(dd->control_reg);
 	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
 		rate *= OMAP4430_REGM4XEN_MULT;
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 579697a..55e381e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -170,12 +170,12 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev);
 
 static void gpmc_write_reg(int idx, u32 val)
 {
-	__raw_writel(val, gpmc_base + idx);
+	writel_relaxed(val, gpmc_base + idx);
 }
 
 static u32 gpmc_read_reg(int idx)
 {
-	return __raw_readl(gpmc_base + idx);
+	return readl_relaxed(gpmc_base + idx);
 }
 
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
@@ -183,7 +183,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
 	void __iomem *reg_addr;
 
 	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writel(val, reg_addr);
+	writel_relaxed(val, reg_addr);
 }
 
 static u32 gpmc_cs_read_reg(int cs, int idx)
@@ -191,7 +191,7 @@ static u32 gpmc_cs_read_reg(int cs, int idx)
 	void __iomem *reg_addr;
 
 	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readl(reg_addr);
+	return readl_relaxed(reg_addr);
 }
 
 /* TODO: Add support for gpmc_fck to clock framework and use it */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0289adc..5bf2dc7 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -93,7 +93,7 @@ EXPORT_SYMBOL(omap_type);
 #define OMAP_TAP_DIE_ID_44XX_2	0x020c
 #define OMAP_TAP_DIE_ID_44XX_3	0x0210
 
-#define read_tap_reg(reg)	__raw_readl(tap_base  + (reg))
+#define read_tap_reg(reg)	readl_relaxed(tap_base  + (reg))
 
 struct omap_id {
 	u16	hawkeye;	/* Silicon type (Hawkeye id) */
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3926f37..411b197 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -83,12 +83,12 @@ struct omap3_intc_regs {
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
 {
-	__raw_writel(val, bank->base_reg + reg);
+	writel_relaxed(val, bank->base_reg + reg);
 }
 
 static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
 {
-	return __raw_readl(bank->base_reg + reg);
+	return readl_relaxed(bank->base_reg + reg);
 }
 
 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f82cf87..216f051 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -70,18 +70,18 @@ struct omap_mux_partition *omap_mux_get(const char *name)
 u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg)
 {
 	if (partition->flags & OMAP_MUX_REG_8BIT)
-		return __raw_readb(partition->base + reg);
+		return readb_relaxed(partition->base + reg);
 	else
-		return __raw_readw(partition->base + reg);
+		return readw_relaxed(partition->base + reg);
 }
 
 void omap_mux_write(struct omap_mux_partition *partition, u16 val,
 			   u16 reg)
 {
 	if (partition->flags & OMAP_MUX_REG_8BIT)
-		__raw_writeb(val, partition->base + reg);
+		writeb_relaxed(val, partition->base + reg);
 	else
-		__raw_writew(val, partition->base + reg);
+		writew_relaxed(val, partition->base + reg);
 }
 
 void omap_mux_write_array(struct omap_mux_partition *partition,
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 458f72f..971791f 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -39,7 +39,7 @@ void __ref omap4_cpu_die(unsigned int cpu)
 		if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
 			pr_err("Secure clear status failed\n");
 	} else {
-		__raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(0, base + OMAP_AUX_CORE_BOOT_0);
 	}
 
 
@@ -53,7 +53,7 @@ void __ref omap4_cpu_die(unsigned int cpu)
 			boot_cpu = omap_read_auxcoreboot0();
 		else
 			boot_cpu =
-				__raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+				readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5;
 
 		if (boot_cpu == smp_processor_id()) {
 			/*
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index f991016..6358257 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -116,7 +116,7 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	__raw_writel(addr, pm_info->wkup_sar_addr);
+	writel_relaxed(addr, pm_info->wkup_sar_addr);
 }
 
 /*
@@ -141,7 +141,7 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
 		break;
 	}
 
-	__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
+	writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr);
 }
 
 /* Helper functions for MPUSS OSWR */
@@ -179,7 +179,7 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
 
-	__raw_writel(save_state, pm_info->l2x0_sar_addr);
+	writel_relaxed(save_state, pm_info->l2x0_sar_addr);
 }
 
 /*
@@ -192,10 +192,10 @@ static void save_l2x0_context(void)
 	u32 val;
 	void __iomem *l2x0_base = omap4_get_l2cache_base();
 	if (l2x0_base) {
-		val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
-		__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
-		val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
-		__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+		val = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(val, sar_base + L2X0_AUXCTRL_OFFSET);
+		val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+		writel_relaxed(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
 	}
 }
 #else
@@ -383,9 +383,9 @@ int __init omap4_mpuss_init(void)
 
 	/* Save device type on scratchpad for low level code to use */
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		__raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
+		writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET);
 	else
-		__raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
+		writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET);
 
 	save_l2x0_context();
 
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8912110..0622542 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -94,7 +94,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (omap_secure_apis_support())
 		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	else
-		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
 
 	if (!cpu1_clkdm && !cpu1_pwrdm) {
 		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -224,7 +224,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
 	else
-		__raw_writel(virt_to_phys(omap5_secondary_startup),
+		writel_relaxed(virt_to_phys(omap5_secondary_startup),
 						base + OMAP_AUX_CORE_BOOT_1);
 
 }
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 813c615..6f5665a 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -56,19 +56,19 @@ static unsigned int omap_secure_apis;
  */
 static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
 {
-	return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
+	return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 +
 				(cpu * CPU_ENA_OFFSET) + (idx * 4));
 }
 
 static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
 {
-	__raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
+	writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
 				(cpu * CPU_ENA_OFFSET) + (idx * 4));
 }
 
 static inline void sar_writel(u32 val, u32 offset, u8 idx)
 {
-	__raw_writel(val, sar_base + offset + (idx * 4));
+	writel_relaxed(val, sar_base + offset + (idx * 4));
 }
 
 static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
@@ -227,21 +227,21 @@ static inline void omap4_irq_save_context(void)
 	}
 
 	/* Save AuxBoot* registers */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
-	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1);
+	writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET);
 
 	/* Save SyncReq generation logic */
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
-	__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
-	__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
+	writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
+	writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET);
 
 	/* Set the Backup Bit Mask status */
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+	val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+	writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
 
 }
 
@@ -260,15 +260,15 @@ static inline void omap5_irq_save_context(void)
 	}
 
 	/* Save AuxBoot* registers */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+	val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+	writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
 
 	/* Set the Backup Bit Mask status */
-	val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
 	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+	writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
 
 }
 
@@ -302,9 +302,9 @@ static void irq_sar_clear(void)
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
 
-	val = __raw_readl(sar_base + offset);
+	val = readl_relaxed(sar_base + offset);
 	val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + offset);
+	writel_relaxed(val, sar_base + offset);
 }
 
 /*
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5791143..2840d1e 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -125,19 +125,19 @@ void __init gic_init_irq(void)
 void gic_dist_disable(void)
 {
 	if (gic_dist_base_addr)
-		__raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
+		writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
 }
 
 bool gic_dist_disabled(void)
 {
-	return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
+	return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
 }
 
 void gic_timer_retrigger(void)
 {
-	u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT);
-	u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET);
-	u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+	u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT);
+	u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET);
+	u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
 
 	if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) {
 		/*
@@ -145,11 +145,11 @@ void gic_timer_retrigger(void)
 		 * disabled.  Ack the pending interrupt, and retrigger it.
 		 */
 		pr_warn("%s: lost localtimer interrupt\n", __func__);
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+		writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
 		if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) {
-			__raw_writel(1, twd_base + TWD_TIMER_COUNTER);
+			writel_relaxed(1, twd_base + TWD_TIMER_COUNTER);
 			twd_ctrl |= TWD_TIMER_CONTROL_ENABLE;
-			__raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
+			writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
 		}
 	}
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d9ee0ff..645dc40 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -72,7 +72,7 @@
  *            | (../mach-omap2/omap_hwmod*)   |
  *            +-------------------------------+
  *            | OMAP clock/PRCM/register fns  |
- *            | (__raw_{read,write}l, clk*)   |
+ *            | ({read,write}l_relaxed, clk*) |
  *            +-------------------------------+
  *
  * Device drivers should not contain any OMAP-specific code or data in
@@ -3114,17 +3114,17 @@ static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
 {
 	if (oh->flags & HWMOD_16BIT_REG)
-		return __raw_readw(oh->_mpu_rt_va + reg_offs);
+		return readw_relaxed(oh->_mpu_rt_va + reg_offs);
 	else
-		return __raw_readl(oh->_mpu_rt_va + reg_offs);
+		return readl_relaxed(oh->_mpu_rt_va + reg_offs);
 }
 
 void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 {
 	if (oh->flags & HWMOD_16BIT_REG)
-		__raw_writew(v, oh->_mpu_rt_va + reg_offs);
+		writew_relaxed(v, oh->_mpu_rt_va + reg_offs);
 	else
-		__raw_writel(v, oh->_mpu_rt_va + reg_offs);
+		writel_relaxed(v, oh->_mpu_rt_va + reg_offs);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index eb8a25d..50640b3 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -57,7 +57,7 @@ static int __init omap4430_phy_power_down(void)
 	}
 
 	/* Power down the phy */
-	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 
 	iounmap(ctrl_base);
 
@@ -162,7 +162,7 @@ void ti81xx_musb_phy_power(u8 on)
 		return;
 	}
 
-	usbphycfg = __raw_readl(scm_base + USBCTRL0);
+	usbphycfg = readl_relaxed(scm_base + USBCTRL0);
 
 	if (on) {
 		if (cpu_is_ti816x()) {
@@ -181,7 +181,7 @@ void ti81xx_musb_phy_power(u8 on)
 			usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
 
 	}
-	__raw_writel(usbphycfg, scm_base + USBCTRL0);
+	writel_relaxed(usbphycfg, scm_base + USBCTRL0);
 
 	iounmap(scm_base);
 }
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index c30e44a..cdbee63 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -30,12 +30,12 @@ void __iomem *prcm_mpu_base;
 
 u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+	return readl_relaxed(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
 void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+	writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
 u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 3194dd8..d2cb636 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -27,7 +27,7 @@
 
 /*
  * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
+ * Use {read,write}l_relaxed() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 9624b40..1a3a963 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -55,12 +55,12 @@
 /* Power/reset management domain register get/set */
 static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
 {
-	return __raw_readl(prm_base + module + idx);
+	return readl_relaxed(prm_base + module + idx);
 }
 
 static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
-	__raw_writel(val, prm_base + module + idx);
+	writel_relaxed(val, prm_base + module + idx);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 7204407..93ba48a 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -27,13 +27,13 @@
 /* Read a register in a PRM instance */
 u32 am33xx_prm_read_reg(s16 inst, u16 idx)
 {
-	return __raw_readl(prm_base + inst + idx);
+	return readl_relaxed(prm_base + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
 void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
 {
-	__raw_writel(val, prm_base + inst + idx);
+	writel_relaxed(val, prm_base + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 277f717..f20e5c9 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -26,7 +26,7 @@
 
 /*
  * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
+ * Use {read,write}l_relaxed() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 03a6034..94a43b3 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -81,13 +81,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
 /* Read a register in a CM/PRM instance in the PRM module */
 u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
 {
-	return __raw_readl(prm_base + inst + reg);
+	return readl_relaxed(prm_base + inst + reg);
 }
 
 /* Write into a register in a CM/PRM instance in the PRM module */
 void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
-	__raw_writel(val, prm_base + inst + reg);
+	writel_relaxed(val, prm_base + inst + reg);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 6334b96..0e08425 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -48,7 +48,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	return __raw_readl(_prm_bases[part] + inst + idx);
+	return readl_relaxed(_prm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
@@ -57,7 +57,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	__raw_writel(val, _prm_bases[part] + inst + idx);
+	writel_relaxed(val, _prm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 446aa13..645a2a4 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -31,24 +31,24 @@ extern void __iomem *omap2_sms_base;
 
 static inline void sdrc_write_reg(u32 val, u16 reg)
 {
-	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
+	writel_relaxed(val, OMAP_SDRC_REGADDR(reg));
 }
 
 static inline u32 sdrc_read_reg(u16 reg)
 {
-	return __raw_readl(OMAP_SDRC_REGADDR(reg));
+	return readl_relaxed(OMAP_SDRC_REGADDR(reg));
 }
 
 /* SMS global register get/set */
 
 static inline void sms_write_reg(u32 val, u16 reg)
 {
-	__raw_writel(val, OMAP_SMS_REGADDR(reg));
+	writel_relaxed(val, OMAP_SMS_REGADDR(reg));
 }
 
 static inline u32 sms_read_reg(u16 reg)
 {
-	return __raw_readl(OMAP_SMS_REGADDR(reg));
+	return readl_relaxed(OMAP_SMS_REGADDR(reg));
 }
 
 extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 9072917..ae3f155 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -103,9 +103,9 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	 * prm2xxx.c function
 	 */
 	if (cpu_is_omap2420())
-		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+		writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
 	else
-		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
+		writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
 	curr_perf_level = level;
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index d7bc33f..1b91ef0 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -57,7 +57,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
-		 * A __raw_readl will fail for non-32 bit aligned address
+		 * A readl_relaxed will fail for non-32 bit aligned address
 		 * and hence the 8-bit read and shift.
 		 */
 		if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index 4bd0968..ddf1818 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -70,16 +70,16 @@ static int is_sram_locked(void)
 	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
-			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+			writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
 		}
 		if (cpu_is_omap34xx()) {
-			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
-			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
-			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+			writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+			writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
+			writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
 		}
 		return 0;
 	} else
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index ead48fa..3a16ea0 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -532,15 +532,15 @@ static void __init realtime_counter_init(void)
 	}
 
 	/* Program numerator and denumerator registers */
-	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+	reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= num;
-	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
+	writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET);
 
-	reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
+	reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= den;
-	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
+	writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
 	iounmap(base);
 }
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 49ac797..267f204 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -462,7 +462,7 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
 	val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT,
 		OMAP4_DOWNTIME_MASK);
 
-	__raw_writel(val, OMAP4_SCRM_CLKSETUPTIME);
+	writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME);
 }
 
 /* OMAP4 specific voltage init functions */
@@ -584,7 +584,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
 	val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29;
 
 	/* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
+	writel_relaxed(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
 				OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2));
 
 	/* HSSCLH can always be zero */
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index d15c7bb..97d6607 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -49,12 +49,12 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
 	}
 
 	/* sequence required to disable watchdog */
-	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+	writel_relaxed(0xAAAA, base + OMAP_WDT_SPR);
+	while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10)
 		cpu_relax();
 
-	__raw_writel(0x5555, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+	writel_relaxed(0x5555, base + OMAP_WDT_SPR);
+	while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10)
 		cpu_relax();
 
 	return 0;
-- 
1.7.9.5

[RFC 18/23] ARM: OMAP: dmtimer: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/plat-omap/dmtimer.c              |    8 ++++----
 arch/arm/plat-omap/include/plat/dmtimer.h |   16 ++++++++--------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 869254c..db10169 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer)
 				timer->context.tmar);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
 				timer->context.tsicr);
-	__raw_writel(timer->context.tier, timer->irq_ena);
+	writel_relaxed(timer->context.tier, timer->irq_ena);
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
 				timer->context.tclr);
 }
@@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
 	omap_dm_timer_enable(timer);
 
 	if (timer->revision == 1)
-		l = __raw_readl(timer->irq_ena) & ~mask;
+		l = readl_relaxed(timer->irq_ena) & ~mask;
 
-	__raw_writel(l, timer->irq_dis);
+	writel_relaxed(l, timer->irq_dis);
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
 
@@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 		return 0;
 	}
 
-	l = __raw_readl(timer->irq_stat);
+	l = readl_relaxed(timer->irq_stat);
 
 	return l;
 }
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index fb92abb..e5e46d6 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
 						int posted)
 {
 	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
 			cpu_relax();
 
-	return __raw_readl(timer->func_base + (reg & 0xff));
+	return readl_relaxed(timer->func_base + (reg & 0xff));
 }
 
 static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
 					u32 reg, u32 val, int posted)
 {
 	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
+		while (readl_relaxed(timer->pend) & (reg >> WPSHIFT))
 			cpu_relax();
 
-	__raw_writel(val, timer->func_base + (reg & 0xff));
+	writel_relaxed(val, timer->func_base + (reg & 0xff));
 }
 
 static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
@@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
 	u32 tidr;
 
 	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = __raw_readl(timer->io_base);
+	tidr = readl_relaxed(timer->io_base);
 	if (!(tidr >> 16)) {
 		timer->revision = 1;
 		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
@@ -382,7 +382,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
 	}
 
 	/* Ack possibly pending interrupt */
-	__raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
+	writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
 }
 
 static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
@@ -396,7 +396,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
 static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
 						unsigned int value)
 {
-	__raw_writel(value, timer->irq_ena);
+	writel_relaxed(value, timer->irq_ena);
 	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
 }
 
@@ -409,7 +409,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
 static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
 						unsigned int value)
 {
-	__raw_writel(value, timer->irq_stat);
+	writel_relaxed(value, timer->irq_stat);
 }
 
 #endif /* __ASM_ARCH_DMTIMER_H */
-- 
1.7.9.5

[RFC 19/23] ARM: OMAP: counter-32k: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/plat-omap/counter_32k.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index d9bc98e..21ca329 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -40,7 +40,7 @@ static void __iomem *sync32k_cnt_reg;
 
 static u32 notrace omap_32k_read_sched_clock(void)
 {
-	return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
+	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
 }
 
 /**
@@ -64,7 +64,7 @@ static void omap_read_persistent_clock(struct timespec *ts)
 	spin_lock_irqsave(&read_persistent_clock_lock, flags);
 
 	last_cycles = cycles;
-	cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
+	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
 
 	nsecs = clocksource_cyc2ns(cycles - last_cycles,
 					persistent_mult, persistent_shift);
@@ -95,7 +95,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase)
 	 * The 'SCHEME' bits(30-31) of the revision register is used
 	 * to identify the version.
 	 */
-	if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
 						OMAP2_32KSYNCNT_REV_SCHEME)
 		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
 	else
-- 
1.7.9.5

[RFC 20/23] ARM: OMAP: debug-leds: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/plat-omap/debug-leds.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index aa7ebc6..48b69de 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -85,12 +85,12 @@ static void dbg_led_set(struct led_classdev *cdev,
 	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
 	u16 reg;
 
-	reg = __raw_readw(&fpga->leds);
+	reg = readw_relaxed(&fpga->leds);
 	if (b != LED_OFF)
 		reg |= led->mask;
 	else
 		reg &= ~led->mask;
-	__raw_writew(reg, &fpga->leds);
+	writew_relaxed(reg, &fpga->leds);
 }
 
 static enum led_brightness dbg_led_get(struct led_classdev *cdev)
@@ -98,7 +98,7 @@ static enum led_brightness dbg_led_get(struct led_classdev *cdev)
 	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
 	u16 reg;
 
-	reg = __raw_readw(&fpga->leds);
+	reg = readw_relaxed(&fpga->leds);
 	return (reg & led->mask) ? LED_FULL : LED_OFF;
 }
 
@@ -112,7 +112,7 @@ static int fpga_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	fpga = ioremap(iomem->start, resource_size(iomem));
-	__raw_writew(0xff, &fpga->leds);
+	writew_relaxed(0xff, &fpga->leds);
 
 	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
 		struct dbg_led *led;
@@ -138,15 +138,15 @@ static int fpga_probe(struct platform_device *pdev)
 
 static int fpga_suspend_noirq(struct device *dev)
 {
-	fpga_led_state = __raw_readw(&fpga->leds);
-	__raw_writew(0xff, &fpga->leds);
+	fpga_led_state = readw_relaxed(&fpga->leds);
+	writew_relaxed(0xff, &fpga->leds);
 
 	return 0;
 }
 
 static int fpga_resume_noirq(struct device *dev)
 {
-	__raw_writew(~fpga_led_state, &fpga->leds);
+	writew_relaxed(~fpga_led_state, &fpga->leds);
 	return 0;
 }
 
-- 
1.7.9.5

[RFC 21/23] ARM: OMAP4: sleep: byteswap data for big-endian

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

Assembler functions defined in sleep44xx.S need to byteswap values
after read / before write from h/w register if code compiled in big
endian mode. Simple change to do 'rev x, x' before str instruction
and after ldr instruction that deals with h/w registers.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/mach-omap2/sleep44xx.S |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9086ce0..8017016 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/smp_scu.h>
 #include <asm/memory.h>
+#include <asm/assembler.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "omap-secure.h"
@@ -74,6 +75,7 @@ ENTRY(omap4_finish_suspend)
 	 */
 	bl	omap4_get_sar_ram_base
 	ldr	r9, [r0, #OMAP_TYPE_OFFSET]
+ARM_BE8(rev	r9, r9)
 	cmp	r9, #0x1			@ Check for HS device
 	bne	skip_secure_l1_clean
 	mov	r0, #SCU_PM_NORMAL
@@ -113,12 +115,14 @@ skip_secure_l1_clean:
 	bl	omap4_get_sar_ram_base
 	mov	r8, r0
 	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
+ARM_BE8(rev	r9, r9)
 	cmp	r9, #0x1			@ Check for HS device
 	bne	scu_gp_set
 	mrc	p15, 0, r0, c0, c0, 5		@ Read MPIDR
 	ands	r0, r0, #0x0f
 	ldreq	r0, [r8, #SCU_OFFSET0]
 	ldrne	r0, [r8, #SCU_OFFSET1]
+ARM_BE8(rev	r0, r0)
 	mov	r1, #0x00
 	stmfd   r13!, {r4-r12, r14}
 	ldr	r12, =OMAP4_MON_SCU_PWR_INDEX
@@ -130,6 +134,7 @@ scu_gp_set:
 	ands	r0, r0, #0x0f
 	ldreq	r1, [r8, #SCU_OFFSET0]
 	ldrne	r1, [r8, #SCU_OFFSET1]
+ARM_BE8(rev	r1, r1)
 	bl	omap4_get_scu_base
 	bl	scu_power_mode
 skip_scu_gp_set:
@@ -157,6 +162,7 @@ skip_scu_gp_set:
 	ands	r5, r5, #0x0f
 	ldreq	r0, [r8, #L2X0_SAVE_OFFSET0]	@ Retrieve L2 state from SAR
 	ldrne	r0, [r8, #L2X0_SAVE_OFFSET1]	@ memory.
+ARM_BE8(rev	r0, r0)
 	cmp	r0, #3
 	bne	do_WFI
 #ifdef CONFIG_PL310_ERRATA_727915
@@ -167,9 +173,11 @@ skip_scu_gp_set:
 	bl	omap4_get_l2cache_base
 	mov	r2, r0
 	ldr	r0, =0xffff
+ARM_BE8(rev	r0, r0)
 	str	r0, [r2, #L2X0_CLEAN_INV_WAY]
 wait:
 	ldr	r0, [r2, #L2X0_CLEAN_INV_WAY]
+ARM_BE8(rev	r0, r0)
 	ldr	r1, =0xffff
 	ands	r0, r0, r1
 	bne	wait
@@ -182,9 +190,11 @@ l2x_sync:
 	bl	omap4_get_l2cache_base
 	mov	r2, r0
 	mov	r0, #0x0
+ARM_BE8(rev	r0, r0)
 	str	r0, [r2, #L2X0_CACHE_SYNC]
 sync:
 	ldr	r0, [r2, #L2X0_CACHE_SYNC]
+ARM_BE8(rev	r0, r0)
 	ands	r0, r0, #0x1
 	bne	sync
 #endif
@@ -216,6 +226,7 @@ do_WFI:
 	bl	omap4_get_sar_ram_base
 	mov	r8, r0
 	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
+ARM_BE8(rev	r9, r9)
 	cmp	r9, #0x1			@ Check for HS device
 	bne	scu_gp_clear
 	mov	r0, #SCU_PM_NORMAL
@@ -258,6 +269,7 @@ ENTRY(omap4_cpu_resume)
 	 */
 	ldr	r8, =OMAP44XX_SAR_RAM_BASE
 	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
+ARM_BE8(rev	r9, r9)
 	cmp	r9, #0x1			@ Skip if GP device
 	bne	skip_ns_smp_enable
 	mrc     p15, 0, r0, c0, c0, 5
@@ -292,16 +304,19 @@ skip_ns_smp_enable:
 	 */
 	ldr	r2, =OMAP44XX_L2CACHE_BASE
 	ldr	r0, [r2, #L2X0_CTRL]
+ARM_BE8(rev	r0, r0)
 	and	r0, #0x0f
 	cmp	r0, #1
 	beq	skip_l2en			@ Skip if already enabled
 	ldr	r3, =OMAP44XX_SAR_RAM_BASE
 	ldr	r1, [r3, #OMAP_TYPE_OFFSET]
+ARM_BE8(rev	r1, r1)
 	cmp	r1, #0x1			@ Check for HS device
 	bne     set_gp_por
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ARM_BE8(rev	r4, r4)
 	adr     r3, ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
@@ -313,11 +328,13 @@ skip_ns_smp_enable:
 set_gp_por:
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ARM_BE8(rev	r0, r0)
 	ldr	r12, =OMAP4_MON_L2X0_PREFETCH_INDEX	@ Setup L2 PREFETCH
 	DO_SMC
 set_aux_ctrl:
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr	r0, [r1, #L2X0_AUXCTRL_OFFSET]
+ARM_BE8(rev	r0, r0)
 	ldr	r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX	@ Setup L2 AUXCTRL
 	DO_SMC
 	mov	r0, #0x1
-- 
1.7.9.5

[RFC 22/23] ARM: OMAP4: sleep/smp: switch CPU to BE if compiled for BE

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

If kernel operates in BE mode on device that has LE bootloader/ROM code,
we need to switch CPU to operate in BE mode before it will start to
access BE data. Generic secondary_startup function that is called from
OMAP specific secondary startup code will do the switch, but we need
to do it earlier because OMAP's secondary_startup code works with BE data.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/mach-omap2/omap-headsmp.S |   13 +++++++++++++
 arch/arm/mach-omap2/sleep44xx.S    |    6 ++++++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 75e9295..75c98d4 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -17,6 +17,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 #include "omap44xx.h"
 
@@ -58,6 +59,12 @@ hold:	ldr	r12,=0x103
 	bne	hold
 
 	/*
+	 * ROM code operates in little endian mode, when we get control we
+	 * need to switch it back to big endian mode.
+	 */
+ARM_BE8(setend be)
+
+	/*
 	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
@@ -75,6 +82,12 @@ hold_2:	ldr	r12,=0x103
 	bne	hold_2
 
 	/*
+	 * ROM code operates in little endian mode, when we get control we
+	 * need to switch it back to big endian mode.
+	 */
+ARM_BE8(setend be)
+
+	/*
 	 * GIC distributor control register has changed between
 	 * CortexA9 r1pX and r2pX. The Control Register secure
 	 * banked version is now composed of 2 bits:
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 8017016..f509dc5 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -260,6 +260,12 @@ ENDPROC(omap4_finish_suspend)
  */
 ENTRY(omap4_cpu_resume)
 	/*
+	 * ROM code operates in little endian mode, when we get control we
+	 * need to switch it back to big endian mode.
+	 */
+ARM_BE8(setend	be)
+
+	/*
 	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
 	 * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
 	 * init and for CPU1, a secure PPA API provided. CPU0 must be ON
-- 
1.7.9.5

[RFC 23/23] ARM: OMAP4: enable big endian support

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

Previous patches fixed big endian issues in OMAP4 code,
so mark it as one that supports big endian

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
 arch/arm/mach-omap2/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b5fb5f7..b5b19a3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -48,6 +48,7 @@ config ARCH_OMAP4
 	select COMMON_CLK
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
+	select ARCH_SUPPORTS_BIG_ENDIAN
 
 config SOC_OMAP5
 	bool "TI OMAP5"
-- 
1.7.9.5

Re: [RFC 02/23] watchdog: omap_wdt: raw read and write endian fix

[Guenter Roeck]

On 11/15/2013 04:01 PM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
>
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
>
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
>
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

Acked-by: Guenter Roeck <linux@roeck-us.net>

Re: [RFC 13/23] spi: omap2-mcspi: raw read and write endian fix

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 552 bytes --]

On Sat, Nov 16, 2013 at 02:01:16AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 13/23] spi: omap2-mcspi: raw read and write endian fix

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 523 bytes --]

On Sat, Nov 16, 2013 at 02:01:16AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Jarkko Nikula]

On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  sound/soc/omap/mcbsp.c      |   12 ++++++------
>  sound/soc/omap/omap-dmic.c  |    4 ++--
>  sound/soc/omap/omap-mcpdm.c |    4 ++--
>  3 files changed, 10 insertions(+), 10 deletions(-)
> 
Looks ok to me by looking at the _relaxed definitions in
arch/arm/include/asm/io.h.

Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Jarkko Nikula]

On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  sound/soc/omap/mcbsp.c      |   12 ++++++------
>  sound/soc/omap/omap-dmic.c  |    4 ++--
>  sound/soc/omap/omap-mcpdm.c |    4 ++--
>  3 files changed, 10 insertions(+), 10 deletions(-)
> 
Looks ok to me by looking at the _relaxed definitions in
arch/arm/include/asm/io.h.

Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Takashi Iwai]

At Sat, 16 Nov 2013 18:09:51 +0200,
Jarkko Nikula wrote:
> 
> On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> > From: Victor Kamensky <victor.kamensky@linaro.org>
> > 
> > All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> > Need to use endian neutral functions to read/write h/w registers.
> > I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> > need to use read[lw]_relaxed and write[lw]_relaxed functions.
> > If the first simply reads/writes register, the second will byteswap
> > it if host operates in BE mode.
> > 
> > Changes are trivial sed like replacement of __raw_xxx functions
> > with xxx_relaxed variant.
> > 
> > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> > ---
> >  sound/soc/omap/mcbsp.c      |   12 ++++++------
> >  sound/soc/omap/omap-dmic.c  |    4 ++--
> >  sound/soc/omap/omap-mcpdm.c |    4 ++--
> >  3 files changed, 10 insertions(+), 10 deletions(-)
> > 
> Looks ok to me by looking at the _relaxed definitions in
> arch/arm/include/asm/io.h.
> 
> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
> 

What's the reason to use _relaxed version in all places?

I understand this patch is to fix the endianess, so this can be
applied as is, as long as the original code works.  But, still in
general, I wonder how the concurrency is guaranteed by this driver
code...


thanks,

Takashi

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Takashi Iwai]

At Sat, 16 Nov 2013 18:09:51 +0200,
Jarkko Nikula wrote:
> 
> On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> > From: Victor Kamensky <victor.kamensky@linaro.org>
> > 
> > All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> > Need to use endian neutral functions to read/write h/w registers.
> > I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> > need to use read[lw]_relaxed and write[lw]_relaxed functions.
> > If the first simply reads/writes register, the second will byteswap
> > it if host operates in BE mode.
> > 
> > Changes are trivial sed like replacement of __raw_xxx functions
> > with xxx_relaxed variant.
> > 
> > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> > ---
> >  sound/soc/omap/mcbsp.c      |   12 ++++++------
> >  sound/soc/omap/omap-dmic.c  |    4 ++--
> >  sound/soc/omap/omap-mcpdm.c |    4 ++--
> >  3 files changed, 10 insertions(+), 10 deletions(-)
> > 
> Looks ok to me by looking at the _relaxed definitions in
> arch/arm/include/asm/io.h.
> 
> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
> 

What's the reason to use _relaxed version in all places?

I understand this patch is to fix the endianess, so this can be
applied as is, as long as the original code works.  But, still in
general, I wonder how the concurrency is guaranteed by this driver
code...


thanks,

Takashi

Re: [RFC 02/23] watchdog: omap_wdt: raw read and write endian fix

[Wim Van Sebroeck]

Hi Victor, Taras,

> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

This was added to linux-watchdog-next.

Kind regards,
Wim.

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Peter Ujfalusi]

On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  sound/soc/omap/mcbsp.c      |   12 ++++++------
>  sound/soc/omap/omap-dmic.c  |    4 ++--
>  sound/soc/omap/omap-mcpdm.c |    4 ++--
>  3 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
> index 83433fd..86c7538 100644
> --- a/sound/soc/omap/mcbsp.c
> +++ b/sound/soc/omap/mcbsp.c
> @@ -36,10 +36,10 @@ static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
>  
>  	if (mcbsp->pdata->reg_size == 2) {
>  		((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
> -		__raw_writew((u16)val, addr);
> +		writew_relaxed((u16)val, addr);
>  	} else {
>  		((u32 *)mcbsp->reg_cache)[reg] = val;
> -		__raw_writel(val, addr);
> +		writel_relaxed(val, addr);
>  	}
>  }
>  
> @@ -48,22 +48,22 @@ static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
>  	void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
>  
>  	if (mcbsp->pdata->reg_size == 2) {
> -		return !from_cache ? __raw_readw(addr) :
> +		return !from_cache ? readw_relaxed(addr) :
>  				     ((u16 *)mcbsp->reg_cache)[reg];
>  	} else {
> -		return !from_cache ? __raw_readl(addr) :
> +		return !from_cache ? readl_relaxed(addr) :
>  				     ((u32 *)mcbsp->reg_cache)[reg];
>  	}
>  }
>  
>  static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
>  {
> -	__raw_writel(val, mcbsp->st_data->io_base_st + reg);
> +	writel_relaxed(val, mcbsp->st_data->io_base_st + reg);
>  }
>  
>  static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
>  {
> -	return __raw_readl(mcbsp->st_data->io_base_st + reg);
> +	return readl_relaxed(mcbsp->st_data->io_base_st + reg);
>  }
>  
>  #define MCBSP_READ(mcbsp, reg) \
> diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
> index 12e566b..1bd531d 100644
> --- a/sound/soc/omap/omap-dmic.c
> +++ b/sound/soc/omap/omap-dmic.c
> @@ -61,12 +61,12 @@ struct omap_dmic {
>  
>  static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
>  {
> -	__raw_writel(val, dmic->io_base + reg);
> +	writel_relaxed(val, dmic->io_base + reg);
>  }
>  
>  static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg)
>  {
> -	return __raw_readl(dmic->io_base + reg);
> +	return readl_relaxed(dmic->io_base + reg);
>  }
>  
>  static inline void omap_dmic_start(struct omap_dmic *dmic)
> diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
> index 90d2a7c..653ba1c 100644
> --- a/sound/soc/omap/omap-mcpdm.c
> +++ b/sound/soc/omap/omap-mcpdm.c
> @@ -74,12 +74,12 @@ struct omap_mcpdm {
>  
>  static inline void omap_mcpdm_write(struct omap_mcpdm *mcpdm, u16 reg, u32 val)
>  {
> -	__raw_writel(val, mcpdm->io_base + reg);
> +	writel_relaxed(val, mcpdm->io_base + reg);
>  }
>  
>  static inline int omap_mcpdm_read(struct omap_mcpdm *mcpdm, u16 reg)
>  {
> -	return __raw_readl(mcpdm->io_base + reg);
> +	return readl_relaxed(mcpdm->io_base + reg);
>  }
>  
>  #ifdef DEBUG
> 


-- 
Péter

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Peter Ujfalusi]

On 11/16/2013 02:01 AM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> ---
>  sound/soc/omap/mcbsp.c      |   12 ++++++------
>  sound/soc/omap/omap-dmic.c  |    4 ++--
>  sound/soc/omap/omap-mcpdm.c |    4 ++--
>  3 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
> index 83433fd..86c7538 100644
> --- a/sound/soc/omap/mcbsp.c
> +++ b/sound/soc/omap/mcbsp.c
> @@ -36,10 +36,10 @@ static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
>  
>  	if (mcbsp->pdata->reg_size == 2) {
>  		((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
> -		__raw_writew((u16)val, addr);
> +		writew_relaxed((u16)val, addr);
>  	} else {
>  		((u32 *)mcbsp->reg_cache)[reg] = val;
> -		__raw_writel(val, addr);
> +		writel_relaxed(val, addr);
>  	}
>  }
>  
> @@ -48,22 +48,22 @@ static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
>  	void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
>  
>  	if (mcbsp->pdata->reg_size == 2) {
> -		return !from_cache ? __raw_readw(addr) :
> +		return !from_cache ? readw_relaxed(addr) :
>  				     ((u16 *)mcbsp->reg_cache)[reg];
>  	} else {
> -		return !from_cache ? __raw_readl(addr) :
> +		return !from_cache ? readl_relaxed(addr) :
>  				     ((u32 *)mcbsp->reg_cache)[reg];
>  	}
>  }
>  
>  static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
>  {
> -	__raw_writel(val, mcbsp->st_data->io_base_st + reg);
> +	writel_relaxed(val, mcbsp->st_data->io_base_st + reg);
>  }
>  
>  static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
>  {
> -	return __raw_readl(mcbsp->st_data->io_base_st + reg);
> +	return readl_relaxed(mcbsp->st_data->io_base_st + reg);
>  }
>  
>  #define MCBSP_READ(mcbsp, reg) \
> diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
> index 12e566b..1bd531d 100644
> --- a/sound/soc/omap/omap-dmic.c
> +++ b/sound/soc/omap/omap-dmic.c
> @@ -61,12 +61,12 @@ struct omap_dmic {
>  
>  static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
>  {
> -	__raw_writel(val, dmic->io_base + reg);
> +	writel_relaxed(val, dmic->io_base + reg);
>  }
>  
>  static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg)
>  {
> -	return __raw_readl(dmic->io_base + reg);
> +	return readl_relaxed(dmic->io_base + reg);
>  }
>  
>  static inline void omap_dmic_start(struct omap_dmic *dmic)
> diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
> index 90d2a7c..653ba1c 100644
> --- a/sound/soc/omap/omap-mcpdm.c
> +++ b/sound/soc/omap/omap-mcpdm.c
> @@ -74,12 +74,12 @@ struct omap_mcpdm {
>  
>  static inline void omap_mcpdm_write(struct omap_mcpdm *mcpdm, u16 reg, u32 val)
>  {
> -	__raw_writel(val, mcpdm->io_base + reg);
> +	writel_relaxed(val, mcpdm->io_base + reg);
>  }
>  
>  static inline int omap_mcpdm_read(struct omap_mcpdm *mcpdm, u16 reg)
>  {
> -	return __raw_readl(mcpdm->io_base + reg);
> +	return readl_relaxed(mcpdm->io_base + reg);
>  }
>  
>  #ifdef DEBUG
> 


-- 
Péter

Re: [RFC 11/23] mfd: omap-usb-host: raw read and write endian fix

[Lee Jones]

On Sat, 16 Nov 2013, Taras Kondratiuk wrote:

> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  drivers/mfd/omap-usb-host.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC 11/23] mfd: omap-usb-host: raw read and write endian fix

[Lee Jones]

On Sat, 16 Nov 2013, Taras Kondratiuk wrote:

> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  drivers/mfd/omap-usb-host.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [RFC 12/23] mfd: omap-usb-tll: raw read and write endian fix

[Lee Jones]

On Sat, 16 Nov 2013, Taras Kondratiuk wrote:

> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  drivers/mfd/omap-usb-tll.c |    8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 523 bytes --]

On Sat, Nov 16, 2013 at 02:01:19AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.

Applied, thanks.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [RFC 16/23] ASoC: omap: mcbsp, mcpdm, dmic: raw read and write endian fix

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 523 bytes --]

On Sat, Nov 16, 2013 at 02:01:19AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 03/23] OMAPDSS: raw read and write endian fix

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 709 bytes --]

On 2013-11-16 02:01, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 

Looks fine to me. Quick test with o4 panda works fine.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: [RFC 03/23] OMAPDSS: raw read and write endian fix

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 709 bytes --]

On 2013-11-16 02:01, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 

Looks fine to me. Quick test with o4 panda works fine.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: [RFC 03/23] OMAPDSS: raw read and write endian fix

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 709 bytes --]

On 2013-11-16 02:01, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 

Looks fine to me. Quick test with o4 panda works fine.

Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]

Re: [RFC 14/23] USB: ehci-omap: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1642 bytes --]

On Sat, Nov 16, 2013 at 02:01:17AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

> ---
>  drivers/usb/host/ehci-omap.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 6fa82d6..803e706 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -73,12 +73,12 @@ struct omap_hcd {
>  
>  static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
>  {
> -	__raw_writel(val, base + reg);
> +	writel_relaxed(val, base + reg);
>  }
>  
>  static inline u32 ehci_read(void __iomem *base, u32 reg)
>  {
> -	return __raw_readl(base + reg);
> +	return readl_relaxed(base + reg);
>  }
>  
>  /* configure so an HC device and id are always provided */
> -- 
> 1.7.9.5
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 14/23] USB: ehci-omap: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1533 bytes --]

On Sat, Nov 16, 2013 at 02:01:17AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  drivers/usb/host/ehci-omap.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
> index 6fa82d6..803e706 100644
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -73,12 +73,12 @@ struct omap_hcd {
>  
>  static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
>  {
> -	__raw_writel(val, base + reg);
> +	writel_relaxed(val, base + reg);
>  }
>  
>  static inline u32 ehci_read(void __iomem *base, u32 reg)
>  {
> -	return __raw_readl(base + reg);
> +	return readl_relaxed(base + reg);
>  }
>  
>  /* configure so an HC device and id are always provided */
> -- 
> 1.7.9.5
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Linus Walleij]

On Sat, Nov 16, 2013 at 1:01 AM, Taras Kondratiuk
<taras.kondratiuk@linaro.org> wrote:

> From: Victor Kamensky <victor.kamensky@linaro.org>
>
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
>
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
>
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>

Since I generally just dislike __raw accessors I went and applied
this. If it collides with any of Tony's fixup work I might need to
take the patch out again, no big deal.

Some ACKs would be nice, but unless there are major objections
this stays merged.

Yours,
Linus Walleij

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Tony Lindgren]

* Linus Walleij <linus.walleij@linaro.org> [131119 01:29]:
> On Sat, Nov 16, 2013 at 1:01 AM, Taras Kondratiuk
> <taras.kondratiuk@linaro.org> wrote:
> 
> > From: Victor Kamensky <victor.kamensky@linaro.org>
> >
> > All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> > Need to use endian neutral functions to read/write h/w registers.
> > I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> > need to use read[lw]_relaxed and write[lw]_relaxed functions.
> > If the first simply reads/writes register, the second will byteswap
> > it if host operates in BE mode.
> >
> > Changes are trivial sed like replacement of __raw_xxx functions
> > with xxx_relaxed variant.
> >
> > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> 
> Since I generally just dislike __raw accessors I went and applied
> this. If it collides with any of Tony's fixup work I might need to
> take the patch out again, no big deal.

Thanks, this should not conflict with what I have. I just had few
fixes for the twl4030-gpio for older omaps and I doubt that I have
further driver dependencies beyond that for my clean-up work.
 
> Some ACKs would be nice, but unless there are major objections
> this stays merged.

Acked-by: Tony Lindgren <tony@atomide.com>

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Javier Martinez Canillas]

On 11/19/2013 10:29 AM, Linus Walleij wrote:
> On Sat, Nov 16, 2013 at 1:01 AM, Taras Kondratiuk
> <taras.kondratiuk@linaro.org> wrote:
> 
>> From: Victor Kamensky <victor.kamensky@linaro.org>
>>
>> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
>> Need to use endian neutral functions to read/write h/w registers.
>> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
>> need to use read[lw]_relaxed and write[lw]_relaxed functions.
>> If the first simply reads/writes register, the second will byteswap
>> it if host operates in BE mode.
>>
>> Changes are trivial sed like replacement of __raw_xxx functions
>> with xxx_relaxed variant.
>>
>> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
>> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> 
> Since I generally just dislike __raw accessors I went and applied
> this. If it collides with any of Tony's fixup work I might need to
> take the patch out again, no big deal.
> 
> Some ACKs would be nice, but unless there are major objections
> this stays merged.

Looks good to me and also I've tested this patch on a TI DM3730 (Cortex A-8)
board in LE mode and found no regressions on devices using a GPIO.

Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

> 
> Yours,
> Linus Walleij
> 

Thanks a lot and best regards,
Javier

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Kevin Hilman]

Linus Walleij <linus.walleij@linaro.org> writes:

> On Sat, Nov 16, 2013 at 1:01 AM, Taras Kondratiuk
> <taras.kondratiuk@linaro.org> wrote:
>
>> From: Victor Kamensky <victor.kamensky@linaro.org>
>>
>> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
>> Need to use endian neutral functions to read/write h/w registers.
>> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
>> need to use read[lw]_relaxed and write[lw]_relaxed functions.
>> If the first simply reads/writes register, the second will byteswap
>> it if host operates in BE mode.
>>
>> Changes are trivial sed like replacement of __raw_xxx functions
>> with xxx_relaxed variant.
>>
>> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
>> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
>
> Since I generally just dislike __raw accessors I went and applied
> this. If it collides with any of Tony's fixup work I might need to
> take the patch out again, no big deal.
>
> Some ACKs would be nice, but unless there are major objections
> this stays merged.

Acked-by: Kevin Hilman <khilman@linaro.org>

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Kevin Hilman]

Linus Walleij <linus.walleij@linaro.org> writes:

> On Sat, Nov 16, 2013 at 1:01 AM, Taras Kondratiuk
> <taras.kondratiuk@linaro.org> wrote:
>
>> From: Victor Kamensky <victor.kamensky@linaro.org>
>>
>> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
>> Need to use endian neutral functions to read/write h/w registers.
>> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
>> need to use read[lw]_relaxed and write[lw]_relaxed functions.
>> If the first simply reads/writes register, the second will byteswap
>> it if host operates in BE mode.
>>
>> Changes are trivial sed like replacement of __raw_xxx functions
>> with xxx_relaxed variant.
>>
>> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
>> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
>
> Since I generally just dislike __raw accessors I went and applied
> this. If it collides with any of Tony's fixup work I might need to
> take the patch out again, no big deal.
>
> Some ACKs would be nice, but unless there are major objections
> this stays merged.

Acked-by: Kevin Hilman <khilman@linaro.org>

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Santosh Shilimkar]

On Friday 15 November 2013 07:01 PM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Re: [RFC 01/23] gpio/omap: raw read and write endian fix

[Santosh Shilimkar]

On Friday 15 November 2013 07:01 PM, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Re: [RFC 15/23] usb: musb: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1384 bytes --]

On Sat, Nov 16, 2013 at 02:01:18AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  drivers/usb/musb/musb_io.h |   18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index eebeed7..76f4d2a 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -42,17 +42,17 @@
>  /* NOTE:  these offsets are all in bytes */
>  
>  static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
> -	{ return __raw_readw(addr + offset); }
> +	{ return readw_relaxed(addr + offset); }

x86 doesn't provide any of the write?_relaxed methods so this breaks
build on x86 at least.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 15/23] usb: musb: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1384 bytes --]

On Sat, Nov 16, 2013 at 02:01:18AM +0200, Taras Kondratiuk wrote:
> From: Victor Kamensky <victor.kamensky@linaro.org>
> 
> All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> Need to use endian neutral functions to read/write h/w registers.
> I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> need to use read[lw]_relaxed and write[lw]_relaxed functions.
> If the first simply reads/writes register, the second will byteswap
> it if host operates in BE mode.
> 
> Changes are trivial sed like replacement of __raw_xxx functions
> with xxx_relaxed variant.
> 
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> ---
>  drivers/usb/musb/musb_io.h |   18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> index eebeed7..76f4d2a 100644
> --- a/drivers/usb/musb/musb_io.h
> +++ b/drivers/usb/musb/musb_io.h
> @@ -42,17 +42,17 @@
>  /* NOTE:  these offsets are all in bytes */
>  
>  static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
> -	{ return __raw_readw(addr + offset); }
> +	{ return readw_relaxed(addr + offset); }

x86 doesn't provide any of the write?_relaxed methods so this breaks
build on x86 at least.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 15/23] usb: musb: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2590 bytes --]

Hi,

On Mon, Nov 25, 2013 at 04:07:49PM -0600, Felipe Balbi wrote:
> On Sat, Nov 16, 2013 at 02:01:18AM +0200, Taras Kondratiuk wrote:
> > From: Victor Kamensky <victor.kamensky@linaro.org>
> > 
> > All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> > Need to use endian neutral functions to read/write h/w registers.
> > I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> > need to use read[lw]_relaxed and write[lw]_relaxed functions.
> > If the first simply reads/writes register, the second will byteswap
> > it if host operates in BE mode.
> > 
> > Changes are trivial sed like replacement of __raw_xxx functions
> > with xxx_relaxed variant.
> > 
> > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> > ---
> >  drivers/usb/musb/musb_io.h |   18 +++++++++---------
> >  1 file changed, 9 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> > index eebeed7..76f4d2a 100644
> > --- a/drivers/usb/musb/musb_io.h
> > +++ b/drivers/usb/musb/musb_io.h
> > @@ -42,17 +42,17 @@
> >  /* NOTE:  these offsets are all in bytes */
> >  
> >  static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
> > -	{ return __raw_readw(addr + offset); }
> > +	{ return readw_relaxed(addr + offset); }
> 
> x86 doesn't provide any of the write?_relaxed methods so this breaks
> build on x86 at least.

here's an untested patch which would "solve" the problem:

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 34f69cb..b6ad164 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -73,6 +73,9 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
 #define __raw_readw __readw
 #define __raw_readl __readl
 
+#define writeb_relaxed(d, a) __writeb(d, a)
+#define writew_relaxed(d, a) __writew(d, a)
+#define writel_relaxed(d, a) __writel(d, a)
 #define __raw_writeb __writeb
 #define __raw_writew __writew
 #define __raw_writel __writel
@@ -85,6 +88,7 @@ build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
 build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
 
 #define readq_relaxed(a)	readq(a)
+#define writeq_relaxed(d, a)	writeq(d, a)
 
 #define __raw_readq(a)		readq(a)
 #define __raw_writeq(val, addr)	writeq(val, addr)


I'm not sure if it's correct though. Someone would have to tell me if
it's correct or not. For now, I have dropped $subject from my
testing/next branch.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 15/23] usb: musb: raw read and write endian fix

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2590 bytes --]

Hi,

On Mon, Nov 25, 2013 at 04:07:49PM -0600, Felipe Balbi wrote:
> On Sat, Nov 16, 2013 at 02:01:18AM +0200, Taras Kondratiuk wrote:
> > From: Victor Kamensky <victor.kamensky@linaro.org>
> > 
> > All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
> > Need to use endian neutral functions to read/write h/w registers.
> > I.e instead of __raw_read[lw] and __raw_write[lw] functions code
> > need to use read[lw]_relaxed and write[lw]_relaxed functions.
> > If the first simply reads/writes register, the second will byteswap
> > it if host operates in BE mode.
> > 
> > Changes are trivial sed like replacement of __raw_xxx functions
> > with xxx_relaxed variant.
> > 
> > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> > Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
> > ---
> >  drivers/usb/musb/musb_io.h |   18 +++++++++---------
> >  1 file changed, 9 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
> > index eebeed7..76f4d2a 100644
> > --- a/drivers/usb/musb/musb_io.h
> > +++ b/drivers/usb/musb/musb_io.h
> > @@ -42,17 +42,17 @@
> >  /* NOTE:  these offsets are all in bytes */
> >  
> >  static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
> > -	{ return __raw_readw(addr + offset); }
> > +	{ return readw_relaxed(addr + offset); }
> 
> x86 doesn't provide any of the write?_relaxed methods so this breaks
> build on x86 at least.

here's an untested patch which would "solve" the problem:

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 34f69cb..b6ad164 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -73,6 +73,9 @@ build_mmio_write(__writel, "l", unsigned int, "r", )
 #define __raw_readw __readw
 #define __raw_readl __readl
 
+#define writeb_relaxed(d, a) __writeb(d, a)
+#define writew_relaxed(d, a) __writew(d, a)
+#define writel_relaxed(d, a) __writel(d, a)
 #define __raw_writeb __writeb
 #define __raw_writew __writew
 #define __raw_writel __writel
@@ -85,6 +88,7 @@ build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
 build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
 
 #define readq_relaxed(a)	readq(a)
+#define writeq_relaxed(d, a)	writeq(d, a)
 
 #define __raw_readq(a)		readq(a)
 #define __raw_writeq(val, addr)	writeq(val, addr)


I'm not sure if it's correct though. Someone would have to tell me if
it's correct or not. For now, I have dropped $subject from my
testing/next branch.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 05/23] i2c: omap: raw read and write endian fix

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 382 bytes --]


> @@ -1142,7 +1142,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
>  	 * raw_readw is done.
>  	 */
> -	rev = __raw_readw(dev->base + 0x04);
> +	rev = readw_relaxed(dev->base + 0x04);
>  
>  	dev->scheme = OMAP_I2C_SCHEME(rev);
>  	switch (dev->scheme) {

Part of the comment above must be removed, too.


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [RFC 05/23] i2c: omap: raw read and write endian fix

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 382 bytes --]


> @@ -1142,7 +1142,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
>  	 * raw_readw is done.
>  	 */
> -	rev = __raw_readw(dev->base + 0x04);
> +	rev = readw_relaxed(dev->base + 0x04);
>  
>  	dev->scheme = OMAP_I2C_SCHEME(rev);
>  	switch (dev->scheme) {

Part of the comment above must be removed, too.


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH] i2c: omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Posting this as a saparate patch out of RFC series.
RFC: http://patchwork.ozlabs.org/patch/291726/
Only minor comment change is done since RFC patch.

Based on v3.13-rc1

 drivers/i2c/busses/i2c-omap.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d76228d..90dcc2e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -1162,9 +1162,9 @@ omap_i2c_probe(struct platform_device *pdev)
 	 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
 	 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
-	 * raw_readw is done.
+	 * readw_relaxed is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
 	dev->scheme = OMAP_I2C_SCHEME(rev);
 	switch (dev->scheme) {
-- 
1.7.9.5

[PATCH] i2c: omap: raw read and write endian fix

[Taras Kondratiuk]

From: Victor Kamensky <victor.kamensky@linaro.org>

All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
---
Posting this as a saparate patch out of RFC series.
RFC: http://patchwork.ozlabs.org/patch/291726/
Only minor comment change is done since RFC patch.

Based on v3.13-rc1

 drivers/i2c/busses/i2c-omap.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d76228d..90dcc2e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -266,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -1162,9 +1162,9 @@ omap_i2c_probe(struct platform_device *pdev)
 	 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
 	 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
-	 * raw_readw is done.
+	 * readw_relaxed is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
 	dev->scheme = OMAP_I2C_SCHEME(rev);
 	switch (dev->scheme) {
-- 
1.7.9.5