All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, wni@nvidia.com,
	durgadoss.r@intel.com, ian.campbell@citrix.com,
	pawel.moll@arm.com, swarren@wwwdotorg.org,
	"Tony Lindgren" <tony@atomide.com>,
	devicetree-discuss@lists.ozlabs.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, rob.herring@calxeda.com,
	lm-sensors@lm-sensors.org,
	"Eduardo Valentin" <eduardo.valentin@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	grant.likely@linaro.org, "Russell King" <linux@arm.linux.org.uk>,
	rui.zhang@intel.com, linux-omap@vger.kernel.org,
	linux@roeck-us.net
Subject: Re: [PATCHv5 10/20] arm: dts: add omap4430 thermal data
Date: Thu, 21 Nov 2013 11:36:13 -0400	[thread overview]
Message-ID: <528E286D.50100@ti.com> (raw)
In-Reply-To: <20131120123245.GA3242@amd.pavel.ucw.cz>


[-- Attachment #1.1: Type: text/plain, Size: 1873 bytes --]

On 20-11-2013 08:32, Pavel Machek wrote:
> HI!
> 
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>  
>>  / {
>>  	cpus {
>> -		cpu@0 {
>> +		cpu0: cpu@0 {
>>  			/* OMAP443x variants OPP50-OPPNT */
>>  			operating-points = <
>>  				/* kHz    uV */
> 
> I see you also add labels to various other entries...

I think I didn't quite get your point here. Can you please elaborate?

This label has been added because it will be used in thermal zone while
referencing the cooling device.

> 
>> @@ -25,9 +25,15 @@
>>  		};
>>  	};
>>  
>> -	bandgap {
>> +	thermal-zones{
> 
> You may want to include space here.

OK.

> 
>> +		#include "omap4-cpu-thermal.dtsi"
>> +	};
>> +
>> +	bandgap: bandgap {
>>  		reg = <0x4a002260 0x4
>>  		       0x4a00232C 0x4>;
>>  		compatible = "ti,omap4430-bandgap";
>> +
>> +		#thermal-sensor-cells = <0>;
>>  	};
>>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Eduardo Valentin" <eduardo.valentin@ti.com>,
	swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ian.campbell@citrix.com, rob.herring@calxeda.com,
	linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com,
	grant.likely@linaro.org, durgadoss.r@intel.com,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Russell King" <linux@arm.linux.org.uk>,
	linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [lm-sensors] [PATCHv5 10/20] arm: dts: add omap4430 thermal data
Date: Thu, 21 Nov 2013 15:36:13 +0000	[thread overview]
Message-ID: <528E286D.50100@ti.com> (raw)
In-Reply-To: <20131120123245.GA3242@amd.pavel.ucw.cz>


[-- Attachment #1.1: Type: text/plain, Size: 1873 bytes --]

On 20-11-2013 08:32, Pavel Machek wrote:
> HI!
> 
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>  
>>  / {
>>  	cpus {
>> -		cpu@0 {
>> +		cpu0: cpu@0 {
>>  			/* OMAP443x variants OPP50-OPPNT */
>>  			operating-points = <
>>  				/* kHz    uV */
> 
> I see you also add labels to various other entries...

I think I didn't quite get your point here. Can you please elaborate?

This label has been added because it will be used in thermal zone while
referencing the cooling device.

> 
>> @@ -25,9 +25,15 @@
>>  		};
>>  	};
>>  
>> -	bandgap {
>> +	thermal-zones{
> 
> You may want to include space here.

OK.

> 
>> +		#include "omap4-cpu-thermal.dtsi"
>> +	};
>> +
>> +	bandgap: bandgap {
>>  		reg = <0x4a002260 0x4
>>  		       0x4a00232C 0x4>;
>>  		compatible = "ti,omap4430-bandgap";
>> +
>> +		#thermal-sensor-cells = <0>;
>>  	};
>>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: eduardo.valentin@ti.com (Eduardo Valentin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 10/20] arm: dts: add omap4430 thermal data
Date: Thu, 21 Nov 2013 11:36:13 -0400	[thread overview]
Message-ID: <528E286D.50100@ti.com> (raw)
In-Reply-To: <20131120123245.GA3242@amd.pavel.ucw.cz>

On 20-11-2013 08:32, Pavel Machek wrote:
> HI!
> 
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Beno?t Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap at vger.kernel.org
>> Cc: devicetree-discuss at lists.ozlabs.org
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: linux-kernel at vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>  
>>  / {
>>  	cpus {
>> -		cpu at 0 {
>> +		cpu0: cpu at 0 {
>>  			/* OMAP443x variants OPP50-OPPNT */
>>  			operating-points = <
>>  				/* kHz    uV */
> 
> I see you also add labels to various other entries...

I think I didn't quite get your point here. Can you please elaborate?

This label has been added because it will be used in thermal zone while
referencing the cooling device.

> 
>> @@ -25,9 +25,15 @@
>>  		};
>>  	};
>>  
>> -	bandgap {
>> +	thermal-zones{
> 
> You may want to include space here.

OK.

> 
>> +		#include "omap4-cpu-thermal.dtsi"
>> +	};
>> +
>> +	bandgap: bandgap {
>>  		reg = <0x4a002260 0x4
>>  		       0x4a00232C 0x4>;
>>  		compatible = "ti,omap4430-bandgap";
>> +
>> +		#thermal-sensor-cells = <0>;
>>  	};
>>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 295 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131121/1c170c49/attachment.sig>

WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Eduardo Valentin" <eduardo.valentin@ti.com>,
	swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ian.campbell@citrix.com, rob.herring@calxeda.com,
	linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com,
	grant.likely@linaro.org, durgadoss.r@intel.com,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Russell King" <linux@arm.linux.org.uk>,
	linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv5 10/20] arm: dts: add omap4430 thermal data
Date: Thu, 21 Nov 2013 11:36:13 -0400	[thread overview]
Message-ID: <528E286D.50100@ti.com> (raw)
In-Reply-To: <20131120123245.GA3242@amd.pavel.ucw.cz>

[-- Attachment #1: Type: text/plain, Size: 1873 bytes --]

On 20-11-2013 08:32, Pavel Machek wrote:
> HI!
> 
>> This patch changes the dtsi entry on omap4430 to contain
>> the thermal data. This data will enable the passive
>> cooling with CPUfreq cooling device at 100C and the
>> system will do a thermal shutdown at 125C.
>>
>> Cc: "Benoît Cousson" <bcousson@baylibre.com>
>> Cc: Tony Lindgren <tony@atomide.com>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: linux-omap@vger.kernel.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>> ---
>>  arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
>> index bcf455e..e9c97d6 100644
>> --- a/arch/arm/boot/dts/omap443x.dtsi
>> +++ b/arch/arm/boot/dts/omap443x.dtsi
>> @@ -12,7 +12,7 @@
>>  
>>  / {
>>  	cpus {
>> -		cpu@0 {
>> +		cpu0: cpu@0 {
>>  			/* OMAP443x variants OPP50-OPPNT */
>>  			operating-points = <
>>  				/* kHz    uV */
> 
> I see you also add labels to various other entries...

I think I didn't quite get your point here. Can you please elaborate?

This label has been added because it will be used in thermal zone while
referencing the cooling device.

> 
>> @@ -25,9 +25,15 @@
>>  		};
>>  	};
>>  
>> -	bandgap {
>> +	thermal-zones{
> 
> You may want to include space here.

OK.

> 
>> +		#include "omap4-cpu-thermal.dtsi"
>> +	};
>> +
>> +	bandgap: bandgap {
>>  		reg = <0x4a002260 0x4
>>  		       0x4a00232C 0x4>;
>>  		compatible = "ti,omap4430-bandgap";
>> +
>> +		#thermal-sensor-cells = <0>;
>>  	};
>>  };
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]

  reply	other threads:[~2013-11-21 15:36 UTC|newest]

Thread overview: 229+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-12 19:46 [PATCHv5 00/20] device thermal limits represented in device tree nodes (v5) Eduardo Valentin
2013-11-12 19:46 ` Eduardo Valentin
2013-11-12 19:46 ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 01/20] thermal: allow registering without .get_temp Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv9 02/20] thermal: introduce device tree parser Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
     [not found]   ` <1384285582-16933-3-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-11-13 16:57     ` Tomasz Figa
2013-11-13 16:57       ` Tomasz Figa
2013-11-13 16:57       ` [lm-sensors] " Tomasz Figa
2013-11-14 11:31       ` Eduardo Valentin
2013-11-14 11:31         ` Eduardo Valentin
2013-11-14 11:31         ` [lm-sensors] " Eduardo Valentin
2013-11-14 13:40         ` Tomasz Figa
2013-11-14 13:40           ` [lm-sensors] " Tomasz Figa
2013-11-15 13:19           ` Eduardo Valentin
2013-11-15 13:19             ` Eduardo Valentin
2013-11-15 13:19             ` [lm-sensors] " Eduardo Valentin
2013-11-21 14:57             ` Tomasz Figa
2013-11-21 14:57               ` [lm-sensors] " Tomasz Figa
2013-11-21 15:48               ` Eduardo Valentin
2013-11-21 15:48                 ` Eduardo Valentin
2013-11-21 15:48                 ` [lm-sensors] " Eduardo Valentin
2013-11-21 16:32                 ` Tomasz Figa
2013-11-21 16:32                   ` [lm-sensors] " Tomasz Figa
2013-11-22 12:33                   ` Eduardo Valentin
2013-11-22 12:33                     ` Eduardo Valentin
2013-11-22 12:33                     ` [lm-sensors] " Eduardo Valentin
     [not found]                     ` <528F4F1E.60903-l0cyMroinI0@public.gmane.org>
2013-11-25 15:31                       ` Mark Rutland
2013-11-25 15:31                         ` Mark Rutland
2013-11-25 15:31                         ` [lm-sensors] " Mark Rutland
     [not found]                         ` <20131125153118.GG32081-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-11-25 15:40                           ` Eduardo Valentin
2013-11-25 15:40                             ` Eduardo Valentin
2013-11-25 15:40                             ` [lm-sensors] " Eduardo Valentin
2013-11-25 15:41                         ` Eduardo Valentin
2013-11-25 15:41                           ` [lm-sensors] " Eduardo Valentin
2013-11-25 15:14               ` Mark Rutland
2013-11-25 15:14                 ` Mark Rutland
2013-11-25 15:14                 ` [lm-sensors] " Mark Rutland
2013-11-25 15:34                 ` Eduardo Valentin
2013-11-25 15:34                   ` [lm-sensors] " Eduardo Valentin
2013-11-15  8:07   ` Jean Delvare
2013-11-15  8:07     ` Jean Delvare
2013-11-15  8:07     ` Jean Delvare
2013-11-18  6:04     ` Zhang Rui
2013-11-18  6:04       ` Zhang Rui
2013-11-18 14:45       ` Eduardo Valentin
2013-11-18 14:45         ` Eduardo Valentin
2013-11-18 14:45         ` Eduardo Valentin
2013-11-19 14:43         ` Jean Delvare
2013-11-19 14:43           ` Jean Delvare
2013-11-19 14:43           ` Jean Delvare
2013-11-25 15:37   ` Mark Rutland
2013-11-25 15:37     ` [lm-sensors] " Mark Rutland
     [not found]     ` <20131125153721.GH32081-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-11-25 15:47       ` Eduardo Valentin
2013-11-25 15:47         ` Eduardo Valentin
2013-11-25 15:47         ` [lm-sensors] " Eduardo Valentin
2013-12-31 10:17   ` Wei Ni
2013-12-31 10:17     ` Wei Ni
2013-12-31 10:17     ` [lm-sensors] " Wei Ni
     [not found]     ` <52C299A8.4010108-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-07  2:48       ` Wei Ni
2014-01-07  2:48         ` Wei Ni
2014-01-07  2:48         ` [lm-sensors] " Wei Ni
     [not found]         ` <52CB6AE2.2090002-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-07 11:17           ` Eduardo Valentin
2014-01-07 11:17             ` Eduardo Valentin
2014-01-07 11:17             ` [lm-sensors] " Eduardo Valentin
2014-01-08  3:19             ` Wei Ni
2014-01-08  3:19               ` [lm-sensors] " Wei Ni
2014-01-08  3:24               ` Hu Yaohui
2014-01-08  3:24                 ` [lm-sensors] " Hu Yaohui
     [not found]                 ` <CAHqbYQvchi3QSgcitUtguFyOJtXhFt5OjcoiSDZnPg9ZyiN4cg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-08  4:16                   ` Wei Ni
2014-01-08  4:16                     ` Wei Ni
2014-01-08  4:16                     ` [lm-sensors] " Wei Ni
2014-01-02  2:55   ` Wei Ni
2014-01-02  2:55     ` [lm-sensors] " Wei Ni
2014-01-02  3:03     ` Wei Ni
2014-01-02  3:03       ` [lm-sensors] " Wei Ni
2014-01-02  2:59   ` Wei Ni
2014-01-02  2:59     ` Wei Ni
2014-01-02  2:59     ` [lm-sensors] " Wei Ni
2014-01-02 17:50     ` Matthew Longnecker
2014-01-02 17:50       ` Matthew Longnecker
2014-01-02 17:50       ` [lm-sensors] " Matthew Longnecker
2014-01-06 13:51       ` Mark Rutland
2014-01-06 13:51         ` [lm-sensors] " Mark Rutland
2014-01-06 14:54         ` Eduardo Valentin
2014-01-06 14:54           ` [lm-sensors] " Eduardo Valentin
2014-01-07  2:44           ` Wei Ni
2014-01-07  2:44             ` [lm-sensors] " Wei Ni
2014-01-07 12:02             ` Mark Rutland
2014-01-07 12:02               ` [lm-sensors] " Mark Rutland
2014-01-13 21:29             ` Eduardo Valentin
2014-01-13 21:29               ` [lm-sensors] " Eduardo Valentin
2014-01-14  2:54               ` Wei Ni
2014-01-14  2:54                 ` [lm-sensors] " Wei Ni
2014-01-14 18:48                 ` Eduardo Valentin
2014-01-14 18:48                   ` [lm-sensors] " Eduardo Valentin
2014-01-13 15:37       ` Eduardo Valentin
2014-01-13 15:37         ` Eduardo Valentin
2014-01-13 15:37         ` [lm-sensors] " Eduardo Valentin
2014-01-02 17:35   ` Matthew Longnecker
2014-01-02 17:35     ` Matthew Longnecker
2014-01-02 17:35     ` [lm-sensors] " Matthew Longnecker
     [not found]     ` <52C5A344.2060908-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-06 18:52       ` Eduardo Valentin
2014-01-06 18:52         ` Eduardo Valentin
2014-01-06 18:52         ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 03/20] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 04/20] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device propertie Eduardo Valentin
2013-11-14 13:17   ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-14 13:17     ` Eduardo Valentin
2013-11-14 13:17     ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope Eduardo Valentin
2013-11-14 22:04     ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Rafael J. Wysocki
2013-11-14 22:04       ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope Rafael J. Wysocki
2013-11-15  4:41   ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties viresh kumar
2013-11-15  4:53     ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope viresh kumar
2014-01-12 14:31   ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Zhang, Rui
2014-01-12 14:31     ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope Zhang, Rui
2014-01-13 15:08     ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2014-01-13 15:08       ` Eduardo Valentin
2014-01-13 15:08       ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope Eduardo Valentin
2014-01-14 19:07     ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2014-01-14 19:07       ` Eduardo Valentin
2014-01-14 19:07       ` [lm-sensors] [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device prope Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-15  7:43   ` Jean Delvare
2013-11-15  7:43     ` Jean Delvare
2013-11-15  7:43     ` [lm-sensors] " Jean Delvare
2013-11-18 14:27     ` Eduardo Valentin
2013-11-18 14:27       ` Eduardo Valentin
2013-11-18 14:27       ` [lm-sensors] " Eduardo Valentin
2013-11-18 16:25       ` Guenter Roeck
2013-11-18 16:25         ` [lm-sensors] " Guenter Roeck
2013-11-18 16:40         ` Eduardo Valentin
2013-11-18 16:40           ` Eduardo Valentin
2013-11-18 16:40           ` [lm-sensors] " Eduardo Valentin
2013-11-19  9:39       ` Jean Delvare
2013-11-19  9:39         ` Jean Delvare
2013-11-19  9:39         ` [lm-sensors] " Jean Delvare
2013-11-22 14:37         ` Eduardo Valentin
2013-11-22 14:37           ` Eduardo Valentin
2013-11-22 14:37           ` [lm-sensors] " Eduardo Valentin
2013-11-23 18:38           ` Jean Delvare
2013-11-23 18:38             ` Jean Delvare
2013-11-23 18:38             ` [lm-sensors] " Jean Delvare
2013-11-12 19:46 ` [PATCHv5 07/20] hwmon: tmp102: " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 08/20] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 09/20] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 10/20] arm: dts: add omap4430 " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-20 12:32   ` Pavel Machek
2013-11-20 12:32     ` Pavel Machek
2013-11-20 12:32     ` [lm-sensors] " Pavel Machek
2013-11-21 15:36     ` Eduardo Valentin [this message]
2013-11-21 15:36       ` Eduardo Valentin
2013-11-21 15:36       ` Eduardo Valentin
2013-11-21 15:36       ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 11/20] arm: dts: add omap4460 " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 12/20] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 13/20] arm: dts: add cooling properties on omap4460 " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 14/20] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 15/20] arm: dts: add omap5 CORE " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 16/20] arm: dts: add omap5 " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 17/20] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 18/20] arm: dts: make OMAP443x bandgap node to belong to OCP Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 19/20] arm: dts: make OMAP4460 " Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` Eduardo Valentin
2013-11-12 19:46   ` [lm-sensors] " Eduardo Valentin
     [not found] ` <1384285582-16933-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-11-12 19:46   ` [PATCHv5 20/20] MAINTAINERS: add maintainer entry for thermal bindings Eduardo Valentin
2013-11-12 19:46     ` Eduardo Valentin
2013-11-12 19:46     ` [lm-sensors] " Eduardo Valentin
2013-11-12 19:59     ` Olof Johansson
2013-11-12 19:59       ` [lm-sensors] " Olof Johansson
2013-11-12 20:14       ` Eduardo Valentin
2013-11-12 20:14         ` Eduardo Valentin
2013-11-12 20:14         ` [lm-sensors] " Eduardo Valentin
2013-11-13  9:42         ` Mark Rutland
2013-11-13  9:42           ` [lm-sensors] " Mark Rutland
2013-11-13 12:17           ` Eduardo Valentin
2013-11-13 12:17             ` [lm-sensors] " Eduardo Valentin
2013-11-13 14:46           ` Eduardo Valentin
2013-11-13 14:46             ` [lm-sensors] " Eduardo Valentin
2013-11-14 13:30           ` [PATCHv6 20/20] MAINTAINERS: add thermal bindings entry in thermal domain Eduardo Valentin
2013-11-14 13:30             ` Eduardo Valentin
2013-11-14 13:30             ` [lm-sensors] " Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=528E286D.50100@ti.com \
    --to=eduardo.valentin@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=devicetree@vger.kernel.org \
    --cc=durgadoss.r@intel.com \
    --cc=grant.likely@linaro.org \
    --cc=ian.campbell@citrix.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=rui.zhang@intel.com \
    --cc=swarren@wwwdotorg.org \
    --cc=tony@atomide.com \
    --cc=wni@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.