* PROBLEM: restart instead of shutdown on 3.12.1, B85 Haswell
@ 2013-11-23 12:28 art1
0 siblings, 0 replies; only message in thread
From: art1 @ 2013-11-23 12:28 UTC (permalink / raw)
To: lenb, rjw; +Cc: linux-acpi
Hi,
restarting and shutting down works correctly on 3.11.8, but on 3.12.1
when I execute "sudo poweroff" the system restarts instead of shutting
down. I didn't find any error messages.
Hardware is ASRock B85 Pro4 motherboard with i5-4670 Haswell and
integrated graphics, software is Ubuntu 12.04.
System data:
$ sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux as 3.12.1-a1 #1 SMP PREEMPT Wed Nov 20 23:24:08 CET 2013 x86_64
x86_64 x86_64 GNU/Linux
Gnu C 4.6
Gnu make 3.81
binutils 2.22
util-linux 2.20.1
mount support
module-init-tools 3.16
e2fsprogs 1.42
xfsprogs 3.1.7
pcmciautils 018
PPP 2.4.5
Linux C Library 2.15
Dynamic linker (ldd) 2.15
Procps 3.2.8
Net-tools 1.60
Kbd 1.15.2
Sh-utils 8.13
wireless-tools 30
Modules Loaded usb_storage snd_hrtimer pci_stub vboxpci
vboxnetadp vboxnetflt fuse vboxdrv ip6table_filter ip6_tables
ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat
nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT
xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables
bridge stp llc dm_crypt dm_mod snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss snd_seq_midi joydev snd_rawmidi snd_seq_midi_event snd_seq
psmouse bnep snd_timer serio_raw snd_seq_device rfcomm lpc_ich ehci_pci
bluetooth ehci_hcd snd soundcore snd_page_alloc mei_me mei rfkill evdev
processor w83627ehf hwmon_vid lm75 coretemp lp parport ext4 jbd2 mbcache
crc16 sd_mod hid_generic usbhid hid crc32_pclmul crc32c_intel
ghash_clmulni_intel ahci libahci aesni_intel i915 drm_kms_helper drm
intel_agp i2c_algo_bit intel_gtt libata ablk_helper cryptd lrw gf128mul
glue_helper i2c_core video e1000e aes_x86_64 scsi_mod xhci_hcd ptp
pps_core usbcore usb_common button
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.1-a1 (root@as) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Wed Nov 20 23:24:08 CET 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.1-a1
root=UUID=3f8f69f8-5a66-49e1-8dd0-081d62f95a0d ro
crashkernel=384M-2G:64M,2G-:128M
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b967afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b967b000-0x00000000b9681fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9682000-0x00000000b9f56fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9f57000-0x00000000ba1f4fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba1f5000-0x00000000cc20cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc20d000-0x00000000cc412fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc413000-0x00000000cc44efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc44f000-0x00000000cc4f6fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc4f7000-0x00000000ccffefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B85
Pro4, BIOS P1.80 09/10/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 4 base 00CF800000 mask 7FFF800000 uncachable
[ 0.000000] 5 base 041F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 041E800000 mask 7FFF800000 uncachable
[ 0.000000] 7 base 041E600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped
at [ffff8800000fd7b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff]
[ 0.000000] [mem 0x41e400000-0x41e5fffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff]
[ 0.000000] [mem 0x41c000000-0x41e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb967afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb95fffff] page 2M
[ 0.000000] [mem 0xb9600000-0xb967afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9682000-0xb9f56fff]
[ 0.000000] [mem 0xb9682000-0xb97fffff] page 4k
[ 0.000000] [mem 0xb9800000-0xb9dfffff] page 2M
[ 0.000000] [mem 0xb9e00000-0xb9f56fff] page 4k
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba1f5000-0xcc20cfff]
[ 0.000000] [mem 0xba1f5000-0xba1fffff] page 4k
[ 0.000000] [mem 0xba200000-0xcc1fffff] page 2M
[ 0.000000] [mem 0xcc200000-0xcc20cfff] page 4k
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcc413000-0xcc44efff]
[ 0.000000] [mem 0xcc413000-0xcc44efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
[ 0.000000] [mem 0xccfff000-0xccffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35188000-0x368bbfff]
[ 0.000000] Reserving 128MB of memory at 720MB for crashkernel
(System RAM: 16037MB)
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cc4d3088 00094 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cc4dd7f8 0010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000cc4d31b8 0A639 (v02 ALASKA A M I
00000180 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000cc4f5080 00040
[ 0.000000] ACPI: APIC 00000000cc4dd908 00072 (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000cc4dd980 00044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000cc4dd9c8 00539 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000cc4ddf08 00AD8 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000cc4de9e0 001C7 (v01 PmRef LakeTiny
00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 00000000cc4deba8 0003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cc4debe8 00038 (v01 ALASKA A M I
01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000cc4dec20 0036D (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000cc4def90 03294 (v01 SaSsdt SaSsdt
00003000 INTL 20091112)
[ 0.000000] ACPI: AAFT 00000000cc4e2228 002BB (v01 ALASKA OEMAAFT
01072009 MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000cc4e24e8 000A5 (v32 INTEL HCG 00000001
TFSM 000F4240)
[ 0.000000] ACPI: DMAR 00000000cc4e2590 000B8 (v01 INTEL HSW
00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 00000000cc4e2648 00803 (v01 Intel_ IsctTabl
00001000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff]
[ 0.000000] NODE_DATA [mem 0x41e5f5000-0x41e5f9fff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD ->
[ffff88040e000000-ffff88041dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xb967afff]
[ 0.000000] node 0: [mem 0xb9682000-0xb9f56fff]
[ 0.000000] node 0: [mem 0xba1f5000-0xcc20cfff]
[ 0.000000] node 0: [mem 0xcc413000-0xcc44efff]
[ 0.000000] node 0: [mem 0xccfff000-0xccffffff]
[ 0.000000] node 0: [mem 0x100000000-0x41e5fffff]
[ 0.000000] On node 0 totalpages: 4105537
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12991 pages used for memmap
[ 0.000000] DMA32 zone: 831397 pages, LIFO batch:31
[ 0.000000] Normal zone: 51096 pages used for memmap
[ 0.000000] Normal zone: 3270144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb967b000-0xb9681fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9f57000-0xba1f4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc20d000-0xcc412fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc44f000-0xcc4f6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc4f7000-0xccffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041e200000 s86144
r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 4041365
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.12.1-artur1
root=UUID=3f8f69f8-5a66-49e1-8dd0-081d62f95a0d ro
crashkernel=384M-2G:64M,2G-:128M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15930888K/16422148K available (5188K kernel code,
797K rwdata, 1696K rodata, 1144K init, 1288K bss, 491260K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 66060288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3398.872 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6800.98 BogoMIPS (lpj=11329573)
[ 0.000117] pid_max: default: 32768 minimum: 301
[ 0.000188] Security Framework initialized
[ 0.000247] AppArmor: AppArmor disabled by boot time parameter
[ 0.000304] Yama: becoming mindful.
[ 0.001015] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.003226] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.004214] Mount-cache hash table entries: 256
[ 0.004386] Initializing cgroup subsys memory
[ 0.004448] Initializing cgroup subsys devices
[ 0.004503] Initializing cgroup subsys freezer
[ 0.004558] Initializing cgroup subsys net_cls
[ 0.004613] Initializing cgroup subsys blkio
[ 0.004682] CPU: Physical Processor ID: 0
[ 0.004735] CPU: Processor Core ID: 0
[ 0.004790] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004790] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.005618] mce: CPU supports 9 MCE banks
[ 0.005682] CPU0: Thermal monitoring enabled (TM1)
[ 0.005746] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.005746] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.005746] tlb_flushall_shift: 6
[ 0.005931] Freeing SMP alternatives memory: 20K (ffffffff819e7000 -
ffffffff819ec000)
[ 0.006550] ACPI: Core revision 20130725
[ 0.011621] ACPI: All ACPI Tables successfully acquired
[ 0.013083] ftrace: allocating 20131 entries in 79 pages
[ 0.018982] dmar: Host address width 39
[ 0.020454] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020515] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap
c0000020660462 ecap f0101a
[ 0.020589] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.020649] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap
d2008020660462 ecap f010da
[ 0.020722] dmar: RMRR base: 0x000000cc39a000 end: 0x000000cc3a6fff
[ 0.020778] dmar: RMRR base: 0x000000cf800000 end: 0x000000df9fffff
[ 0.020899] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.020956] HPET id 0 under DRHD base 0xfed91000
[ 0.021117] Enabled IRQ remapping in x2apic mode
[ 0.021172] Enabling x2apic
[ 0.021224] Enabled x2apic
[ 0.021279] Switched APIC routing to cluster x2apic.
[ 0.021717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054748] smpboot: CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
(fam: 06, model: 3c, stepping: 03)
[ 0.054934] TSC deadline timer enabled
[ 0.054939] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell
events, full-width counters, Intel PMU driver.
[ 0.055195] ... version: 3
[ 0.055248] ... bit width: 48
[ 0.055303] ... generic registers: 8
[ 0.055358] ... value mask: 0000ffffffffffff
[ 0.055414] ... max period: 0000ffffffffffff
[ 0.055471] ... fixed-purpose events: 3
[ 0.055524] ... event mask: 00000007000000ff
[ 0.095607] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.081679] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.136697] Brought up 4 CPUs
[ 0.136752] smpboot: Total of 4 processors activated (27201.93 BogoMIPS)
[ 0.139366] devtmpfs: initialized
[ 0.142095] PM: Registering ACPI NVS region [mem
0xb967b000-0xb9681fff] (28672 bytes)
[ 0.142168] PM: Registering ACPI NVS region [mem
0xcc44f000-0xcc4f6fff] (688128 bytes)
[ 0.142706] RTC time: 11:58:25, date: 11/23/13
[ 0.142784] NET: Registered protocol family 16
[ 0.142896] cpuidle: using governor ladder
[ 0.142951] cpuidle: using governor menu
[ 0.143012] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.143084] ACPI: bus type PCI registered
[ 0.143138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.143229] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.143306] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.147610] PCI: Using configuration type 1 for base access
[ 0.148090] bio: create slab <bio-0> at 0
[ 0.148204] ACPI: Added _OSI(Module Device)
[ 0.148256] ACPI: Added _OSI(Processor Device)
[ 0.148313] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.148369] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.149528] ACPI: EC: Look up EC in DSDT
[ 0.150732] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.152317] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160100] ACPI: SSDT 00000000cc408c18 003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.160521] ACPI: Dynamic OEM Table Load:
[ 0.160646] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.172725] ACPI: SSDT 00000000cc408618 005AA (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.173195] ACPI: Dynamic OEM Table Load:
[ 0.173319] ACPI: SSDT (null) 005AA (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.186154] ACPI: SSDT 00000000cc407d98 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.186577] ACPI: Dynamic OEM Table Load:
[ 0.186704] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.197048] ACPI: Interpreter enabled
[ 0.197105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20130725/hwxface-571)
[ 0.197253] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20130725/hwxface-571)
[ 0.197408] ACPI: (supports S0 S3 S4 S5)
[ 0.197461] ACPI: Using IOAPIC for interrupt routing
[ 0.197552] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.197731] ACPI: No dock devices found.
[ 0.203244] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.203434] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.203616] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[ 0.203946] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
[ 0.204068] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.204123] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
[ 0.204195] PCI host bridge to bus 0000:00
[ 0.204250] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.204307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.204365] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.204423] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.204482] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff]
[ 0.204542] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff]
[ 0.204602] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff]
[ 0.204662] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff]
[ 0.204721] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff]
[ 0.204780] pci_bus 0000:00: root bus resource [mem
0x000e4000-0x000e7fff]
[ 0.204839] pci_bus 0000:00: root bus resource [mem
0xdfa00000-0xfeafffff]
[ 0.204903] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.204961] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.204969] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.204973] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.204976] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.205046] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.205061] pci 0000:00:14.0: reg 0x10: [mem 0xf0420000-0xf042ffff 64bit]
[ 0.205112] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.205144] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.205223] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.205239] pci 0000:00:16.0: reg 0x10: [mem 0xf043c000-0xf043c00f 64bit]
[ 0.205293] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.205349] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.205363] pci 0000:00:19.0: reg 0x10: [mem 0xf0400000-0xf041ffff]
[ 0.205369] pci 0000:00:19.0: reg 0x14: [mem 0xf0439000-0xf0439fff]
[ 0.205376] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.205426] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.205456] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.205537] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.205555] pci 0000:00:1a.0: reg 0x10: [mem 0xf0438000-0xf04383ff]
[ 0.205632] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.205672] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.205753] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.205765] pci 0000:00:1b.0: reg 0x10: [mem 0xf0430000-0xf0433fff 64bit]
[ 0.205819] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.205851] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.205929] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.205983] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.206016] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.206092] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
[ 0.206146] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.206178] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.206262] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.206279] pci 0000:00:1d.0: reg 0x10: [mem 0xf0437000-0xf04373ff]
[ 0.206356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.206394] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.206472] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.206606] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.206619] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.206625] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.206630] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.206636] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.206642] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.206648] pci 0000:00:1f.2: reg 0x24: [mem 0xf0436000-0xf04367ff]
[ 0.206681] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.206725] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.206737] pci 0000:00:1f.3: reg 0x10: [mem 0xf0435000-0xf04350ff 64bit]
[ 0.206753] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.206843] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.206958] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[ 0.207050] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.207123] pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive
decode)
[ 0.207189] pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.207190] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.207191] pci 0000:00:1c.2: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.207192] pci 0000:00:1c.2: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 0.207193] pci 0000:00:1c.2: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 0.207194] pci 0000:00:1c.2: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 0.207195] pci 0000:00:1c.2: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 0.207196] pci 0000:00:1c.2: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 0.207197] pci 0000:00:1c.2: bridge window [mem
0x000e4000-0x000e7fff] (subtractive decode)
[ 0.207198] pci 0000:00:1c.2: bridge window [mem
0xdfa00000-0xfeafffff] (subtractive decode)
[ 0.207307] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.207381] pci 0000:02:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.207382] pci 0000:02:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.207383] pci 0000:02:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.207384] pci 0000:02:00.0: bridge window [??? 0x00000000 flags
0x0] (subtractive decode)
[ 0.207384] pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.207385] pci 0000:02:00.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.207386] pci 0000:02:00.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.207387] pci 0000:02:00.0: bridge window [mem
0x000d0000-0x000d3fff] (subtractive decode)
[ 0.207388] pci 0000:02:00.0: bridge window [mem
0x000d4000-0x000d7fff] (subtractive decode)
[ 0.207389] pci 0000:02:00.0: bridge window [mem
0x000d8000-0x000dbfff] (subtractive decode)
[ 0.207390] pci 0000:02:00.0: bridge window [mem
0x000dc000-0x000dffff] (subtractive decode)
[ 0.207391] pci 0000:02:00.0: bridge window [mem
0x000e0000-0x000e3fff] (subtractive decode)
[ 0.207392] pci 0000:02:00.0: bridge window [mem
0x000e4000-0x000e7fff] (subtractive decode)
[ 0.207393] pci 0000:02:00.0: bridge window [mem
0xdfa00000-0xfeafffff] (subtractive decode)
[ 0.207409] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is
unsupported)
[ 0.207985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.208462] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.209020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.209497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.209970] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12
14 15)
[ 0.210449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14
15) *0, disabled.
[ 0.211010] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12
14 15)
[ 0.211486] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.212170] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.212298] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.212336] Found 1 acpi root devices
[ 0.212379] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212452] vgaarb: loaded
[ 0.212504] vgaarb: bridge control possible 0000:00:02.0
[ 0.212579] PCI: Using ACPI for IRQ routing
[ 0.213851] PCI: pci_cache_line_size set to 64 bytes
[ 0.213886] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.213888] e820: reserve RAM buffer [mem 0xb967b000-0xbbffffff]
[ 0.213889] e820: reserve RAM buffer [mem 0xb9f57000-0xbbffffff]
[ 0.213889] e820: reserve RAM buffer [mem 0xcc20d000-0xcfffffff]
[ 0.213891] e820: reserve RAM buffer [mem 0xcc44f000-0xcfffffff]
[ 0.213891] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ 0.213892] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[ 0.213940] NetLabel: Initializing
[ 0.213993] NetLabel: domain hash size = 128
[ 0.214048] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.214111] NetLabel: unlabeled traffic allowed by default
[ 0.214178] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.214556] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.216624] Switched to clocksource hpet
[ 0.219132] pnp: PnP ACPI init
[ 0.219191] ACPI: bus type PNP registered
[ 0.219286] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.219346] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.219353] pnp 00:01: [dma 4]
[ 0.219361] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.219372] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.219425] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.219489] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.219548] system 00:04: [io 0xffff] has been reserved
[ 0.219604] system 00:04: [io 0xffff] has been reserved
[ 0.219661] system 00:04: [io 0xffff] has been reserved
[ 0.219718] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.219776] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.219833] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.219891] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.219949] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.220012] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.220069] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220088] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.220114] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.220172] system 00:06: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.220214] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.220272] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220389] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.220446] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220461] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.220551] pnp 00:0a: [dma 0 disabled]
[ 0.220576] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.220822] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.220881] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.220939] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.220998] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.221057] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.221116] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.221175] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.221234] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.221293] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.221351] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.221411] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.221471] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.221530] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.221678] pnp: PnP ACPI: found 12 devices
[ 0.221730] ACPI: bus type PNP unregistered
[ 0.227455] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to
[bus 01] add_size 1000
[ 0.227458] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.227459] pci 0000:00:1c.0: bridge window [mem
0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.227475] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.227477] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] get_res_add_size add_size 200000
[ 0.227478] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff]
get_res_add_size add_size 1000
[ 0.227480] pci 0000:00:1c.0: BAR 14: assigned [mem
0xdfa00000-0xdfbfffff]
[ 0.227541] pci 0000:00:1c.0: BAR 15: assigned [mem
0xdfc00000-0xdfdfffff 64bit pref]
[ 0.227613] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.227672] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.227729] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.227789] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
[ 0.227849] pci 0000:00:1c.0: bridge window [mem
0xdfc00000-0xdfdfffff 64bit pref]
[ 0.227925] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.227996] pci 0000:00:1c.2: PCI bridge to [bus 02-03]
[ 0.228060] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.228061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.228062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228063] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.228064] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.228065] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.228066] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.228067] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.228067] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.228068] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.228070] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.228070] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
[ 0.228071] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff
64bit pref]
[ 0.228072] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.228073] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.228074] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.228075] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.228076] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.228077] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.228078] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.228079] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.228080] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.228081] pci_bus 0000:02: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 0.228082] pci_bus 0000:03: resource 8 [io 0x0000-0x0cf7]
[ 0.228083] pci_bus 0000:03: resource 9 [io 0x0d00-0xffff]
[ 0.228084] pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.228085] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.228085] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.228086] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.228087] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.228088] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.228089] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.228090] pci_bus 0000:03: resource 17 [mem 0xdfa00000-0xfeafffff]
[ 0.228107] NET: Registered protocol family 2
[ 0.228312] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[ 0.228628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.228791] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.230281] TCP: reno registered
[ 0.230345] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.230441] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.230557] NET: Registered protocol family 1
[ 0.230618] pci 0000:00:02.0: Boot video device
[ 0.263315] PCI: CLS 64 bytes, default 64
[ 0.263338] Unpacking initramfs...
[ 0.523289] Freeing initrd memory: 23760K (ffff880035188000 -
ffff8800368bc000)
[ 0.523369] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.523429] software IO TLB [mem 0xc820d000-0xcc20d000] (64MB) mapped
at [ffff8800c820d000-ffff8800cc20cfff]
[ 0.523609] Scanning for low memory corruption every 60 seconds
[ 0.523814] audit: initializing netlink socket (disabled)
[ 0.523878] type=2000 audit(1385207905.519:1): initialized
[ 0.531757] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.532758] zbud: loaded
[ 0.532890] VFS: Disk quotas dquot_6.5.2
[ 0.532969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.533133] msgmni has been set to 31161
[ 0.533390] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 0.533487] io scheduler noop registered
[ 0.533543] io scheduler deadline registered
[ 0.533612] io scheduler cfq registered (default)
[ 0.533802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.533866] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.533951] intel_idle: MWAIT substates: 0x42120
[ 0.533952] intel_idle: v0.4 model 0x3C
[ 0.533953] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.534033] GHES: HEST is not enabled!
[ 0.534116] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.554681] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 0.555028] Linux agpgart interface v0.103
[ 0.555120] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.557614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.557684] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.557796] mousedev: PS/2 mouse device common for all mice
[ 0.557883] rtc_cmos 00:05: RTC can wake from S4
[ 0.558047] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.558127] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.558262] drop_monitor: Initializing network drop monitor service
[ 0.558363] TCP: cubic registered
[ 0.558465] NET: Registered protocol family 10
[ 0.558613] NET: Registered protocol family 17
[ 0.558673] Key type dns_resolver registered
[ 0.558902] registered taskstats version 1
[ 0.559557] Magic number: 5:368:985
[ 0.559696] rtc_cmos 00:05: setting system clock to 2013-11-23
11:58:25 UTC (1385207905)
[ 0.559798] PM: Hibernation image not present or could not be loaded.
[ 0.560452] Freeing unused kernel memory: 1144K (ffffffff818c9000 -
ffffffff819e7000)
[ 0.560524] Write protecting the kernel read-only data: 8192k
[ 0.561960] Freeing unused kernel memory: 944K (ffff880001514000 -
ffff880001600000)
[ 0.562547] Freeing unused kernel memory: 352K (ffff8800017a8000 -
ffff880001800000)
[ 0.572218] udevd[74]: starting version 175
[ 0.583593] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.583673] ACPI: Power Button [PWRB]
[ 0.585483] pps_core: LinuxPPS API ver. 1 registered
[ 0.585543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.585735] ACPI: bus type USB registered
[ 0.585806] usbcore: registered new interface driver usbfs
[ 0.585869] usbcore: registered new interface driver hub
[ 0.586268] usbcore: registered new device driver usb
[ 0.586723] PTP clock support registered
[ 0.587491] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.587494] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.587556] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 0.587709] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.587726] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.588451] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.588511] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.589244] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.589324] ACPI: Power Button [PWRF]
[ 0.591317] SCSI subsystem initialized
[ 0.593877] [drm] Initialized drm 1.1.0 20060810
[ 0.596464] libata version 3.00 loaded.
[ 0.596710] hub 1-0:1.0: USB hub found
[ 0.596785] hub 1-0:1.0: 12 ports detected
[ 0.598766] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.598829] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 0.599169] hub 2-0:1.0: USB hub found
[ 0.599291] hub 2-0:1.0: 6 ports detected
[ 0.609822] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.609874] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 0.609999] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 0.777324] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.777388] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
bc:5f:f4:d0:b0:1f
[ 0.777461] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network
Connection
[ 0.777545] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No:
FFFFFF-0FF
[ 0.778263] [drm] Memory usable by graphics device = 2048M
[ 0.778323] i915 0000:00:02.0: setting latency timer to 64
[ 0.797972] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.797978] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.798037] [drm] Driver supports precise vblank timestamp query.
[ 0.798134] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.956008] usb 1-11: new full-speed USB device number 2 using xhci_hcd
[ 0.980909] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.990500] usbcore: registered new interface driver usbhid
[ 0.990566] usbhid: USB HID core driver
[ 0.991583] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae
SiderWinderTM X6 Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input4
[ 0.991729] hid-generic 0003:045E:074B.0001: input,hidraw0: USB HID
v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae
SiderWinderTM X6 Keyboard] on usb-0000:00:14.0-11/input0
[ 0.993655] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae
SiderWinderTM X6 Keyboard as
/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/input/input5
[ 0.993764] hid-generic 0003:045E:074B.0002: input,hidraw1: USB HID
v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae
SiderWinderTM X6 Keyboard] on usb-0000:00:14.0-11/input1
[ 1.139171] usb 1-12: new low-speed USB device number 3 using xhci_hcd
[ 1.157078] usb 1-12: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 1.159287] input: Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM) as
/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input6
[ 1.159527] hid-generic 0003:045E:0047.0003: input,hidraw2: USB HID
v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:14.0-12/input0
[ 1.185924] fbcon: inteldrmfb (fb0) is primary device
[ 1.487550] Console: switching to colour frame buffer device 180x56
[ 1.489561] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.489576] i915 0000:00:02.0: registered panic notifier
[ 1.516536] acpi device:57: registered as cooling_device0
[ 1.516570] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.516608] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 1.516639] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 1.516672] ahci 0000:00:1f.2: version 3.0
[ 1.516752] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.516841] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
0x1 impl SATA mode
[ 1.516863] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ems apst
[ 1.516883] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.517537] scsi0 : ahci
[ 1.517595] scsi1 : ahci
[ 1.517782] scsi2 : ahci
[ 1.517878] scsi3 : ahci
[ 1.517950] scsi4 : ahci
[ 1.518013] scsi5 : ahci
[ 1.518073] ata1: SATA max UDMA/133 abar m2048@0xf0436000 port
0xf0436100 irq 45
[ 1.518091] ata2: DUMMY
[ 1.518098] ata3: DUMMY
[ 1.518105] ata4: DUMMY
[ 1.518112] ata5: DUMMY
[ 1.518119] ata6: DUMMY
[ 1.525488] tsc: Refined TSC clocksource calibration: 3399.013 MHz
[ 1.835253] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.835614] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.835616] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max
UDMA/133
[ 1.835633] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.835943] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.835945] ata1.00: configured for UDMA/133
[ 1.836068] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840
EXT0 PQ: 0 ANSI: 5
[ 1.838804] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120
GB/111 GiB)
[ 1.838913] sd 0:0:0:0: [sda] Write Protect is off
[ 1.838926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.838948] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.839312] sda: sda1 sda2 sda3
[ 1.839558] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.351542] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.524708] Switched to clocksource tsc
[ 6.868792] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 7.242032] EXT4-fs (sda1): re-mounted. Opts:
discard,barrier=0,errors=remount-ro,commit=120
[ 7.294910] EXT4-fs (sda3): barriers disabled
[ 7.298052] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: discard,barrier=0,commit=120,journal_async_commit
[ 8.241337] udevd[665]: starting version 175
[ 8.305636] lp: driver loaded but no devices found
[ 8.341966] w83627ehf: Found NCT6776F chip at 0x290
[ 8.385798] mei_me 0000:00:16.0: setting latency timer to 64
[ 8.385842] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 8.393876] Bluetooth: Core ver 2.16
[ 8.393890] NET: Registered protocol family 31
[ 8.393891] Bluetooth: HCI device and connection manager initialized
[ 8.393896] Bluetooth: HCI socket layer initialized
[ 8.393898] Bluetooth: L2CAP socket layer initialized
[ 8.393900] Bluetooth: SCO socket layer initialized
[ 8.394572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.398364] ehci-pci: EHCI PCI platform driver
[ 8.398827] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 8.398834] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 8.398839] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 8.398850] ehci-pci 0000:00:1a.0: debug port 2
[ 8.402918] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 8.402932] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0438000
[ 8.404627] Bluetooth: RFCOMM TTY layer initialized
[ 8.404634] Bluetooth: RFCOMM socket layer initialized
[ 8.404635] Bluetooth: RFCOMM ver 1.11
[ 8.412639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.412646] Bluetooth: BNEP socket layer initialized
[ 8.412829] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 8.412933] hub 3-0:1.0: USB hub found
[ 8.412937] hub 3-0:1.0: 2 ports detected
[ 8.413099] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 8.413104] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 8.413107] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 4
[ 8.413117] ehci-pci 0000:00:1d.0: debug port 2
[ 8.417007] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 8.417021] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0437000
[ 8.426109] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 8.427410] hub 4-0:1.0: USB hub found
[ 8.427417] hub 4-0:1.0: 2 ports detected
[ 8.427836] ACPI Warning: 0x0000000000001828-0x000000000000182f
SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 8.427840] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 8.427843] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f
SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
[ 8.427844] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f
SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
[ 8.427846] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 8.427847] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f
SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
[ 8.427848] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f
SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
[ 8.427850] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 8.427850] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.462328] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 8.484264] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.484310] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.484343] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.484537] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.484578] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.553751] device-mapper: uevent: version 1.0.3
[ 8.553866] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15)
initialised: dm-devel@redhat.com
[ 8.636041] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.719226] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 8.739215] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.739299] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8.846255] hub 3-1:1.0: USB hub found
[ 8.846338] hub 3-1:1.0: 6 ports detected
[ 8.952363] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 9.076200] hub 4-1:1.0: USB hub found
[ 9.076265] hub 4-1:1.0: 6 ports detected
[ 10.242783] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 10.242786] e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO
[ 10.242812] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.567896] init: failsafe main process (955) killed by TERM signal
[ 12.628495] init: Failed to spawn hybrid-gfx main process: unable to
execute: No such file or directory
[ 12.716853] Bridge firewalling registered
[ 12.753914] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.769993] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.778774] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 13.327580] Ebtables v2.0 registered
[ 13.333724] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.341913] cgroup: libvirtd (1693) created nested cgroup for
controller "memory" which has incomplete hierarchy support. Nested
cgroups may change behavior in the future.
[ 13.341915] cgroup: "memory" requires setting use_hierarchy to 1 on
the root.
[ 13.460898] vboxdrv: Found 4 processor cores.
[ 13.461215] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0xdfe
[ 13.461647] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 13.461648] vboxdrv: Successfully loaded version 4.3.2 (interface
0x001a0005).
[ 13.589864] fuse init (API version 7.22)
[ 13.667534] vboxpci: IOMMU not found (not registered)
[ 13.760331] init: plymouth-stop pre-start process (2228) terminated
with status 1
[ 14.065888] hda-intel: IRQ timing workaround is activated for card
#0. Suggest a bigger bdl_pos_adj.
$ lspci -vvv
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM
Controller (rev 06)
Subsystem: ASRock Incorporation Device 0c00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th
Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00
[VGA controller])
Subsystem: ASRock Incorporation Device 0412
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI (rev 05) (prog-if 30 [XHCI])
Subsystem: ASRock Incorporation Device 8c31
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f0420000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee00298 Data: 0000
Kernel driver in use: xhci_hcd
Kernel modules: xhci-hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASRock Incorporation Device 8c3a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f043c000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00338 Data: 0000
Kernel driver in use: mei_me
Kernel modules: mei-me
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection
I217-V (rev 05)
Subsystem: ASRock Incorporation Device 153b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f0439000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002d8 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 8c2d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0438000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller (rev 05)
Subsystem: ASRock Incorporation Device 5892
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f0430000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00378 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,
MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown,
Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=2 ArbSelect=Fixed TC/VC=04
Status: NegoPending- InProgress-
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfa00000-dfbfffff
Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency
L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surprise+
Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: ASRock Incorporation Device 8c10
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency
L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt-
HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: ASRock Incorporation Device 244e
Capabilities: [a0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 8c26
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0437000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci
Kernel modules: ehci-pci
00:1f.0 ISA bridge: Intel Corporation B85 Express LPC Controller (rev 05)
Subsystem: ASRock Incorporation Device 8c50
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device 8c02
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f0436000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller (rev 05)
Subsystem: ASRock Incorporation Device 8c22
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f0435000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c-i801
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI
Bridge (rev 03) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [c0] Subsystem: ASRock Incorporation Device 1080
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-11-23 12:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-23 12:28 PROBLEM: restart instead of shutdown on 3.12.1, B85 Haswell art1
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.