From: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
To: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>,
thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: kai.poggensee-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings
Date: Thu, 05 Dec 2013 10:12:43 -0700 [thread overview]
Message-ID: <52A0B40B.7040903@wwwdotorg.org> (raw)
In-Reply-To: <fc7440a2f4bf9ab95e47a911c0e0b3b6a2250356.1386108712.git.stefan-XLVq0VzYD2Y@public.gmane.org>
On 12/03/2013 03:18 PM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
>
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
>
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.
Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
tree which doesn't include those patches?
If this does depend on patch 1/3 or 2/3... this patch feels a bit big to
apply to the MFD tree. Perhaps patch 1/3 and 2/3 could be applied alone
to a topic branch in the MFD tree so I can merge that into the Tegra
tree in order to apply this?
WARNING: multiple messages have this Message-ID (diff)
From: swarren@wwwdotorg.org (Stephen Warren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings
Date: Thu, 05 Dec 2013 10:12:43 -0700 [thread overview]
Message-ID: <52A0B40B.7040903@wwwdotorg.org> (raw)
In-Reply-To: <fc7440a2f4bf9ab95e47a911c0e0b3b6a2250356.1386108712.git.stefan@agner.ch>
On 12/03/2013 03:18 PM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
>
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
>
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.
Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
tree which doesn't include those patches?
If this does depend on patch 1/3 or 2/3... this patch feels a bit big to
apply to the MFD tree. Perhaps patch 1/3 and 2/3 could be applied alone
to a topic branch in the MFD tree so I can merge that into the Tegra
tree in order to apply this?
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Warren <swarren@wwwdotorg.org>
To: Stefan Agner <stefan@agner.ch>,
thierry.reding@gmail.com, dev@lynxeye.de, lee.jones@linaro.org,
lgirdwood@gmail.com, broonie@kernel.org
Cc: kai.poggensee@avionic-design.de, sameo@linux.intel.com,
linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings
Date: Thu, 05 Dec 2013 10:12:43 -0700 [thread overview]
Message-ID: <52A0B40B.7040903@wwwdotorg.org> (raw)
In-Reply-To: <fc7440a2f4bf9ab95e47a911c0e0b3b6a2250356.1386108712.git.stefan@agner.ch>
On 12/03/2013 03:18 PM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
>
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
>
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.
Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra
tree which doesn't include those patches?
If this does depend on patch 1/3 or 2/3... this patch feels a bit big to
apply to the MFD tree. Perhaps patch 1/3 and 2/3 could be applied alone
to a topic branch in the MFD tree so I can merge that into the Tegra
tree in order to apply this?
next prev parent reply other threads:[~2013-12-05 17:12 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-03 22:18 [PATCH v4 0/3] regulator: tps6586x: add version detection and voltage tables Stefan Agner
2013-12-03 22:18 ` Stefan Agner
2013-12-03 22:18 ` Stefan Agner
2013-12-03 22:18 ` [PATCH v4 1/3] mfd: tps6586x: add version detection Stefan Agner
2013-12-03 22:18 ` Stefan Agner
[not found] ` <77384d24810d9a22fc04cad6f7468f54a9cbaafe.1386108712.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2013-12-04 8:10 ` Lee Jones
2013-12-04 8:10 ` Lee Jones
2013-12-04 8:10 ` Lee Jones
2013-12-04 8:40 ` Stefan Agner
2013-12-04 8:40 ` Stefan Agner
[not found] ` <e2ae7b9602d0c1e11f8e56ced17e9da0-XLVq0VzYD2Y@public.gmane.org>
2013-12-04 10:07 ` Lee Jones
2013-12-04 10:07 ` Lee Jones
2013-12-04 10:07 ` Lee Jones
2013-12-04 11:38 ` Stefan Agner
2013-12-04 11:38 ` Stefan Agner
2013-12-04 11:48 ` Lee Jones
2013-12-04 11:48 ` Lee Jones
2013-12-04 11:49 ` Mark Brown
2013-12-04 11:49 ` Mark Brown
2013-12-04 11:49 ` Mark Brown
[not found] ` <20131204114909.GK29268-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-12-04 11:58 ` Lee Jones
2013-12-04 11:58 ` Lee Jones
2013-12-04 11:58 ` Lee Jones
2013-12-05 17:06 ` Stephen Warren
2013-12-05 17:06 ` Stephen Warren
2013-12-05 17:06 ` Stephen Warren
2013-12-05 17:43 ` Stefan Agner
2013-12-05 17:43 ` Stefan Agner
2013-12-05 17:43 ` Stefan Agner
2013-12-05 17:40 ` Stephen Warren
2013-12-05 17:40 ` Stephen Warren
[not found] ` <52A0BA85.4020201-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-12-05 22:56 ` Stefan Agner
2013-12-05 22:56 ` Stefan Agner
2013-12-05 22:56 ` Stefan Agner
[not found] ` <ac11b85d05765b3b68eff8c27041e965-XLVq0VzYD2Y@public.gmane.org>
2013-12-06 8:44 ` Lee Jones
2013-12-06 8:44 ` Lee Jones
2013-12-06 8:44 ` Lee Jones
[not found] ` <cover.1386108712.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2013-12-03 22:18 ` [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table Stefan Agner
2013-12-03 22:18 ` Stefan Agner
2013-12-03 22:18 ` Stefan Agner
[not found] ` <127fe07e18665f93aa8d7c03e03164f1a049ddb6.1386108712.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2013-12-04 9:48 ` Thierry Reding
2013-12-04 9:48 ` Thierry Reding
2013-12-04 9:48 ` Thierry Reding
2013-12-04 12:14 ` Mark Brown
2013-12-04 12:14 ` Mark Brown
2013-12-04 12:14 ` Mark Brown
2013-12-04 14:17 ` Stefan Agner
2013-12-04 14:17 ` Stefan Agner
[not found] ` <0983a0fa016faa5674834afad4472413-XLVq0VzYD2Y@public.gmane.org>
2013-12-04 14:29 ` Mark Brown
2013-12-04 14:29 ` Mark Brown
2013-12-04 14:29 ` Mark Brown
[not found] ` <20131204142954.GW29268-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2013-12-04 14:40 ` Lee Jones
2013-12-04 14:40 ` Lee Jones
2013-12-04 14:40 ` Lee Jones
2013-12-05 17:10 ` Stephen Warren
2013-12-05 17:10 ` Stephen Warren
2013-12-05 17:10 ` Stephen Warren
2013-12-03 22:18 ` [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings Stefan Agner
2013-12-03 22:18 ` Stefan Agner
2013-12-03 22:18 ` Stefan Agner
[not found] ` <fc7440a2f4bf9ab95e47a911c0e0b3b6a2250356.1386108712.git.stefan-XLVq0VzYD2Y@public.gmane.org>
2013-12-04 11:52 ` Lucas Stach
2013-12-04 11:52 ` Lucas Stach
2013-12-04 11:52 ` Lucas Stach
2013-12-05 17:12 ` Stephen Warren [this message]
2013-12-05 17:12 ` Stephen Warren
2013-12-05 17:12 ` Stephen Warren
2013-12-05 17:33 ` Stefan Agner
2013-12-05 17:33 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A0B40B.7040903@wwwdotorg.org \
--to=swarren-3lzwwm7+weoh9zmkesr00q@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org \
--cc=kai.poggensee-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=stefan-XLVq0VzYD2Y@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.