From: Rajendra Nayak <rnayak@ti.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: nm@ti.com, devicetree@vger.kernel.org, paul@pwsan.com,
mturquette@linaro.org, Tony Lindgren <tony@atomide.com>,
bcousson@baylibre.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv11 07/49] clk: divider: add support for low level ops
Date: Fri, 20 Dec 2013 15:37:36 +0530 [thread overview]
Message-ID: <52B416E8.8070006@ti.com> (raw)
In-Reply-To: <52B342D2.1010301@ti.com>
On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>>> Divider clock can now be registered to use low level register access ops.
>>> Preferred initialization method is via clock description.
>>
>> This seems to make omap2 not boot for me. No output whatsoever even with
>> DEBUG_LL and earlyprintk.
>
> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...
I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
what I see
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 0.000000] pgd = c0004000
[ 0.000000] [00000000] *pgd=00000000
[ 0.000000] Internal error: Oops: 5 [#1] SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
[ 0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
[ 0.000000] PC is at clk_mux_get_parent+0x14/0xcc
[ 0.000000] LR is at clk_mux_get_parent+0x10/0xcc
[ 0.000000] pc : [<c044a234>] lr : [<c044a230>] psr: a00001d3
[ 0.000000] sp : c07d5f40 ip : 00000000 fp : 00000000
[ 0.000000] r10: c07dc880 r9 : 4107b366 r8 : c07f46a4
[ 0.000000] r7 : c0edfa80 r6 : ffffffff r5 : c07f6810 r4 : 00000002
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : c069da67 r0 : 00000002
[ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 00c5387d Table: 80004000 DAC: 00000017
[ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
[ 0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
[ 0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
[ 0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
[ 0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
[ 0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
[ 0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
[ 0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
[ 0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
[ 0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
[ 0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
[ 0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
[ 0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
[ 0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
[ 0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
[ 0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
[ 0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
I'll try and debug further but any quick thoughts on what could be wrong?
>
> -Tero
>
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv11 07/49] clk: divider: add support for low level ops
Date: Fri, 20 Dec 2013 15:37:36 +0530 [thread overview]
Message-ID: <52B416E8.8070006@ti.com> (raw)
In-Reply-To: <52B342D2.1010301@ti.com>
On Friday 20 December 2013 12:32 AM, Tero Kristo wrote:
> On 12/19/2013 08:26 PM, Tony Lindgren wrote:
>> * Tero Kristo <t-kristo@ti.com> [131219 03:26]:
>>> Divider clock can now be registered to use low level register access ops.
>>> Preferred initialization method is via clock description.
>>
>> This seems to make omap2 not boot for me. No output whatsoever even with
>> DEBUG_LL and earlyprintk.
>
> Thats weird... I was kind of afraid something like this might happen though as these patches touch the clock low level routines globally, but I can't see what could be broken...
I got hold of a 2430sdp and saw the same behavior, however DEBUG_LL and earlyprintk worked and this is
what I see
[ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 0.000000] pgd = c0004000
[ 0.000000] [00000000] *pgd=00000000
[ 0.000000] Internal error: Oops: 5 [#1] SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc4-00056-ga9fa93e #2
[ 0.000000] task: c07dfcb8 ti: c07d4000 task.ti: c07d4000
[ 0.000000] PC is at clk_mux_get_parent+0x14/0xcc
[ 0.000000] LR is at clk_mux_get_parent+0x10/0xcc
[ 0.000000] pc : [<c044a234>] lr : [<c044a230>] psr: a00001d3
[ 0.000000] sp : c07d5f40 ip : 00000000 fp : 00000000
[ 0.000000] r10: c07dc880 r9 : 4107b366 r8 : c07f46a4
[ 0.000000] r7 : c0edfa80 r6 : ffffffff r5 : c07f6810 r4 : 00000002
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : c069da67 r0 : 00000002
[ 0.000000] Flags: NzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 00c5387d Table: 80004000 DAC: 00000017
[ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07d4248)
[ 0.000000] Stack: (0xc07d5f40 to 0xc07d6000)
[ 0.000000] 5f40: c044a220 00000002 c6001f40 c0448e54 c07dfcb8 c0862f7c c07f3600 c07f4368
[ 0.000000] 5f60: ffffffff c0edfa80 c07b6b80 4107b366 c07dc880 c077edf4 c0531008 c07f4380
[ 0.000000] 5f80: c07f34d4 c077f20c c0878964 c0edfa80 c07b6b80 c0877ac4 c0877640 ffffffff
[ 0.000000] 5fa0: c0edfa80 c0777268 00000001 c07792ac c07b5250 c077221c 00000002 c076e974
[ 0.000000] 5fc0: ffffffff ffffffff c076e57c 00000000 00000000 c07b6b80 00000000 00c5387d
[ 0.000000] 5fe0: c07dc928 c07b6b7c c07e1474 80004008 8052c544 80008074 00000000 00000000
[ 0.000000] [<c044a234>] (clk_mux_get_parent+0x14/0xcc) from [<c0448e54>] (__clk_init+0xe4/0x3f0)
[ 0.000000] [<c0448e54>] (__clk_init+0xe4/0x3f0) from [<c077edf4>] (omap_clocks_register+0x24/0x48)
[ 0.000000] [<c077edf4>] (omap_clocks_register+0x24/0x48) from [<c077f20c>] (omap2430_clk_init+0x4c/0x124)
[ 0.000000] [<c077f20c>] (omap2430_clk_init+0x4c/0x124) from [<c0777268>] (omap_clk_init+0x28/0x30)
[ 0.000000] [<c0777268>] (omap_clk_init+0x28/0x30) from [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58)
[ 0.000000] [<c07792ac>] (omap2_sync32k_timer_init+0x8/0x58) from [<c077221c>] (time_init+0x1c/0x30)
[ 0.000000] [<c077221c>] (time_init+0x1c/0x30) from [<c076e974>] (start_kernel+0x1d4/0x360)
[ 0.000000] [<c076e974>] (start_kernel+0x1d4/0x360) from [<80008074>] (0x80008074)
[ 0.000000] Code: e1a05000 e5900000 ebfff7f5 e595300c (e5933000)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
I'll try and debug further but any quick thoughts on what could be wrong?
>
> -Tero
>
next prev parent reply other threads:[~2013-12-20 10:07 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-19 11:23 [PATCHv11 00/49] ARM: TI SoC clock DT conversion Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 01/49] clk: add support for registering clocks from description Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 10:53 ` Paul Walmsley
2013-12-20 10:53 ` Paul Walmsley
2013-12-20 13:14 ` Tero Kristo
2013-12-20 13:14 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 03/49] clk: divider: add support for registering divider clock from descriptor Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 10:54 ` Paul Walmsley
2013-12-20 10:54 ` Paul Walmsley
2013-12-19 11:23 ` [PATCHv11 04/49] clk: mux: add support for registering mux " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 10:55 ` Paul Walmsley
2013-12-20 10:55 ` Paul Walmsley
2013-12-19 11:23 ` [PATCHv11 05/49] clk: gate: add support for registering gate " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 10:56 ` Paul Walmsley
2013-12-20 10:56 ` Paul Walmsley
2013-12-19 11:23 ` [PATCHv11 06/49] clk: add support for low level register ops Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 11:00 ` Paul Walmsley
2013-12-20 11:00 ` Paul Walmsley
2013-12-20 11:17 ` Tero Kristo
2013-12-20 11:17 ` Tero Kristo
2013-12-20 16:09 ` Paul Walmsley
2013-12-20 16:09 ` Paul Walmsley
2013-12-19 11:23 ` [PATCHv11 07/49] clk: divider: add support for low level ops Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 18:26 ` Tony Lindgren
2013-12-19 18:26 ` Tony Lindgren
2013-12-19 19:02 ` Tero Kristo
2013-12-19 19:02 ` Tero Kristo
2013-12-20 10:07 ` Rajendra Nayak [this message]
2013-12-20 10:07 ` Rajendra Nayak
2013-12-20 10:29 ` Tero Kristo
2013-12-20 10:29 ` Tero Kristo
2013-12-20 10:39 ` Rajendra Nayak
2013-12-20 10:39 ` Rajendra Nayak
2013-12-20 16:16 ` Tony Lindgren
2013-12-20 16:16 ` Tony Lindgren
2013-12-20 16:33 ` Tero Kristo
2013-12-20 16:33 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 08/49] clk: gate: " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 09/49] clk: mux: " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 10/49] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 11/49] CLK: ti: add init support for clock IP blocks Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 12/49] CLK: TI: Add DPLL clock support Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 13/49] CLK: TI: add autoidle support Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 14/49] clk: ti: add composite clock support Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 15/49] CLK: ti: add support for ti divider-clock Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 16/49] clk: ti: add support for TI fixed factor clock Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 17/49] CLK: TI: add support for gate clock Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 18/49] CLK: TI: add support for clockdomain binding Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-20 11:46 ` Paul Walmsley
2013-12-20 11:46 ` Paul Walmsley
2013-12-19 11:23 ` [PATCHv11 19/49] clk: ti: add support for basic mux clock Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 20/49] CLK: TI: add omap4 clock init file Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 21/49] CLK: TI: add omap5 " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 22/49] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 23/49] CLK: TI: DRA7: Add APLL support Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 24/49] CLK: TI: add dra7 clock init file Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 25/49] CLK: TI: add am33xx " Tero Kristo
2013-12-19 11:23 ` Tero Kristo
[not found] ` <1387452260-23276-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2013-12-19 11:23 ` [PATCHv11 02/49] clk: fixed-rate: add support for registering fixed-rate clock from descriptor Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 26/49] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 28/49] CLK: TI: add am43xx clock init file Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 29/49] ARM: dts: omap4 clock data Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 38/49] ARM: dts: am43xx " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 41/49] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 42/49] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-20 11:49 ` Paul Walmsley
2013-12-20 11:49 ` Paul Walmsley
2013-12-20 13:12 ` Tero Kristo
2013-12-20 13:12 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 44/49] ARM: OMAP2+: io: use new clock init API Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 46/49] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 47/49] ARM: AM43xx: " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:23 ` [PATCHv11 27/49] CLK: TI: add omap3 clock init file Tero Kristo
2013-12-19 11:23 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 30/49] ARM: dts: omap5 clock data Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 31/49] ARM: dts: dra7 " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 32/49] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 33/49] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 34/49] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 35/49] ARM: dts: am33xx clock data Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 36/49] ARM: dts: omap3 " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 37/49] ARM: dts: AM35xx: use DT " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 39/49] ARM: OMAP2+: clock: add support for indexed memmaps Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 40/49] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 45/49] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 48/49] ARM: AM33xx: " Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 11:24 ` [PATCHv11 49/49] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2013-12-19 11:24 ` Tero Kristo
2013-12-19 15:07 ` [PATCHv11 00/49] ARM: TI SoC clock DT conversion Nishanth Menon
2013-12-19 15:07 ` Nishanth Menon
2013-12-19 18:05 ` Tony Lindgren
2013-12-19 18:05 ` Tony Lindgren
2013-12-20 6:52 ` Keerthy
2013-12-20 6:52 ` Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B416E8.8070006@ti.com \
--to=rnayak@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.