From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
Date: Fri, 17 Jan 2014 10:29:03 +0100 [thread overview]
Message-ID: <52D8F7DF.5030406@atmel.com> (raw)
In-Reply-To: <1389927565-22477-1-git-send-email-voice.shen@atmel.com>
On 17/01/2014 03:59, Bo Shen :
> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS
> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep.
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>
> drivers/usb/gadget/atmel_usba_udc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
> index 2cb52e0..7e67a81 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/atmel_usba_udc.c
> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
> if (ep_status) {
> int i;
>
> - for (i = 0; i < USBA_NR_ENDPOINTS; i++)
> + for (i = 0; i < udc->num_ep; i++)
> if (ep_status & (1 << i)) {
> if (ep_is_control(&udc->usba_ep[i]))
> usba_control_irq(udc, &udc->usba_ep[i]);
>
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Bo Shen <voice.shen@atmel.com>, Felipe Balbi <balbi@ti.com>
Cc: <plagnioj@jcrosoft.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] USB: at91: fix the number of endpoint parameter
Date: Fri, 17 Jan 2014 10:29:03 +0100 [thread overview]
Message-ID: <52D8F7DF.5030406@atmel.com> (raw)
In-Reply-To: <1389927565-22477-1-git-send-email-voice.shen@atmel.com>
On 17/01/2014 03:59, Bo Shen :
> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS
> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep.
>
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>
> drivers/usb/gadget/atmel_usba_udc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
> index 2cb52e0..7e67a81 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/atmel_usba_udc.c
> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
> if (ep_status) {
> int i;
>
> - for (i = 0; i < USBA_NR_ENDPOINTS; i++)
> + for (i = 0; i < udc->num_ep; i++)
> if (ep_status & (1 << i)) {
> if (ep_is_control(&udc->usba_ep[i]))
> usba_control_irq(udc, &udc->usba_ep[i]);
>
--
Nicolas Ferre
next prev parent reply other threads:[~2014-01-17 9:29 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-17 2:59 [PATCH 1/2] USB: at91: fix the number of endpoint parameter Bo Shen
2014-01-17 2:59 ` Bo Shen
2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen
2014-01-17 2:59 ` Bo Shen
2014-01-17 9:29 ` Nicolas Ferre
2014-01-17 9:29 ` Nicolas Ferre
2014-02-18 16:19 ` Felipe Balbi
2014-02-18 16:19 ` Felipe Balbi
2014-02-19 1:14 ` Bo Shen
2014-02-19 1:14 ` Bo Shen
2014-02-19 1:22 ` Felipe Balbi
2014-02-19 1:22 ` Felipe Balbi
2014-02-19 1:46 ` Bo Shen
2014-02-19 1:46 ` Bo Shen
2014-01-17 9:29 ` Nicolas Ferre [this message]
2014-01-17 9:29 ` [PATCH 1/2] USB: at91: fix the number of endpoint parameter Nicolas Ferre
2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-20 3:39 ` Bo Shen
2014-01-20 3:39 ` Bo Shen
2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD
2014-01-21 8:12 ` Bo Shen
2014-01-21 8:12 ` Bo Shen
2014-01-21 9:06 ` Nicolas Ferre
2014-01-21 9:06 ` Nicolas Ferre
2014-02-07 8:37 ` Jean-Christophe PLAGNIOL-VILLARD
2014-02-07 8:37 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D8F7DF.5030406@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.