All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Meier <florian.meier@koalo.de>
To: Daniel Matuschek <daniel@matuschek.net>, alsa-devel@alsa-project.org
Cc: Dimitris.Papastamos@wolfsonmicro.com, lgirdwood@gmail.com,
	broonie@kernel.org, perex@perex.cz, tiwai@suse.de,
	patches@opensource.wolfsonmicro.com,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ASoC: wm8804: Allow control of master clock divider in PLL generation
Date: Fri, 17 Jan 2014 17:43:14 +0100	[thread overview]
Message-ID: <52D95DA2.7000509@koalo.de> (raw)
In-Reply-To: <alpine.DEB.2.02.1401142030110.23472@parallels-Parallels-Virtual-Platform>

I have tested your patch.
There is a (non blocking) error message regarding .idle_bias_off, but I
assume that should not have something to do with your patch. Can we just
set idle_bias_off to false here?

Otherwise, it looks good to me.

On 01/14/2014 08:34 PM, Daniel Matuschek wrote:
> WM8804 can run with PLL frequencies of 256xfs and 128xfs for
> most sample rates. At 192kHz only 128xfs is supported. The
> existing driver selects 128xfs automatically for some lower
> samples rates. By using an additional mclk_div divider, it
> is now possible to control the behaviour. This allows using
> 256xfs PLL frequency on all sample rates up to 96kHz. It
> should allow lower jitter and better signal quality. The
> behavior has to be controlled by the sound card driver,
> because some sample frequency share the same setting. e.g.
> 192kHz and 96kHz use 24.576MHz master clock. The only
> difference is the MCLK divider.
> 
> Signed-off-by: Daniel Matuschek <daniel@matuschek.net>
> 
> ---
>  sound/soc/codecs/wm8804.c |   17 ++++++++++++++---
>  sound/soc/codecs/wm8804.h |    4 ++++
>  2 files changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/soc/codecs/wm8804.c b/sound/soc/codecs/wm8804.c
> index 1704b1e..4619bf8 100644
> --- a/sound/soc/codecs/wm8804.c
> +++ b/sound/soc/codecs/wm8804.c
> @@ -63,6 +63,7 @@ struct wm8804_priv {
>      struct regmap *regmap;
>      struct regulator_bulk_data supplies[WM8804_NUM_SUPPLIES];
>      struct notifier_block disable_nb[WM8804_NUM_SUPPLIES];
> +    int mclk_div;
>  };
> 
>  static int txsrc_get(struct snd_kcontrol *kcontrol,
> @@ -318,7 +319,7 @@ static struct {
> 
>  #define FIXED_PLL_SIZE ((1ULL << 22) * 10)
>  static int pll_factors(struct pll_div *pll_div, unsigned int target,
> -               unsigned int source)
> +               unsigned int source, unsigned int mclk_div)
>  {
>      u64 Kpart;
>      unsigned long int K, Ndiv, Nmod, tmp;
> @@ -330,7 +331,8 @@ static int pll_factors(struct pll_div *pll_div,
> unsigned int target,
>       */
>      for (i = 0; i < ARRAY_SIZE(post_table); i++) {
>          tmp = target * post_table[i].div;
> -        if (tmp >= 90000000 && tmp <= 100000000) {
> +        if ((tmp >= 90000000 && tmp <= 100000000) &&
> +            (mclk_div == post_table[i].mclkdiv)) {
>              pll_div->freqmode = post_table[i].freqmode;
>              pll_div->mclkdiv = post_table[i].mclkdiv;
>              target *= post_table[i].div;
> @@ -387,8 +389,12 @@ static int wm8804_set_pll(struct snd_soc_dai *dai,
> int pll_id,
>      } else {
>          int ret;
>          struct pll_div pll_div;
> +        struct wm8804_priv *wm8804;
> 
> -        ret = pll_factors(&pll_div, freq_out, freq_in);
> +        wm8804 = snd_soc_codec_get_drvdata(codec);
> +
> +        ret = pll_factors(&pll_div, freq_out, freq_in,
> +            wm8804->mclk_div);
>          if (ret)
>              return ret;
> 
> @@ -452,6 +458,7 @@ static int wm8804_set_clkdiv(struct snd_soc_dai *dai,
>                   int div_id, int div)
>  {
>      struct snd_soc_codec *codec;
> +    struct wm8804_priv *wm8804;
> 
>      codec = dai->codec;
>      switch (div_id) {
> @@ -459,6 +466,10 @@ static int wm8804_set_clkdiv(struct snd_soc_dai *dai,
>          snd_soc_update_bits(codec, WM8804_PLL5, 0x30,
>                      (div & 0x3) << 4);
>          break;
> +    case WM8804_MCLK_DIV:
> +        wm8804 = snd_soc_codec_get_drvdata(codec);
> +        wm8804->mclk_div = div;
> +        break;
>      default:
>          dev_err(dai->dev, "Unknown clock divider: %d\n", div_id);
>          return -EINVAL;
> diff --git a/sound/soc/codecs/wm8804.h b/sound/soc/codecs/wm8804.h
> index 8ec14f5..e72d4f4 100644
> --- a/sound/soc/codecs/wm8804.h
> +++ b/sound/soc/codecs/wm8804.h
> @@ -57,5 +57,9 @@
>  #define WM8804_CLKOUT_SRC_OSCCLK        4
> 
>  #define WM8804_CLKOUT_DIV            1
> +#define WM8804_MCLK_DIV                2
> +
> +#define WM8804_MCLKDIV_256FS            0
> +#define WM8804_MCLKDIV_128FS            1
> 
>  #endif  /* _WM8804_H */

  parent reply	other threads:[~2014-01-17 16:43 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-14 19:34 [PATCH] ASoC: wm8804: Allow control of master clock divider in PLL generation Daniel Matuschek
2014-01-17  0:54 ` Mark Brown
2014-01-17  0:54   ` Mark Brown
2014-01-17 10:35   ` Dimitris Papastamos
2014-01-22 11:40     ` [alsa-devel] " Ben Dooks
2014-01-17  9:48 ` Charles Keepax
2014-01-17 12:22 ` Mark Brown
2014-01-17 12:22   ` Mark Brown
2014-01-20 20:03   ` [alsa-devel] " Daniel Matuschek
2014-01-17 16:43 ` Florian Meier [this message]
2014-01-17 17:59   ` Mark Brown
2014-01-17 18:26     ` Daniel Matuschek
     [not found]     ` <52D97120.8030606@koalo.de>
     [not found]       ` <20140117183332.GC17314@sirena.org.uk>
2014-01-17 18:44         ` Florian Meier
2014-01-17 18:47           ` Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2014-05-29 14:08 Charles Keepax
2014-05-29 15:01 ` Mark Brown
2014-01-12 21:11 Daniel Matuschek
2014-01-13  9:21 ` Florian Meier
2014-01-13 11:14 ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52D95DA2.7000509@koalo.de \
    --to=florian.meier@koalo.de \
    --cc=Dimitris.Papastamos@wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=daniel@matuschek.net \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.