All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Alexey Khoroshilov <khoroshilov@ispras.ru>,
	linux-media@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [patch] [media] stv090x: remove indent levels
Date: Thu, 20 Feb 2014 10:24:21 +0000	[thread overview]
Message-ID: <5305D7D5.8080906@xs4all.nl> (raw)
In-Reply-To: <20140206092800.GB31780@elgon.mountain>

Hi Dan,

This can be improved even more:

On 02/06/14 10:28, Dan Carpenter wrote:
> 1) We can flip the "if (!lock)" check to "if (lock) return lock;" and
>    then remove a big chunk of indenting.
> 2) There is a redundant "if (!lock)" which we can remove since we
>    already know that lock is zero.  This removes another indent level.
> 
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> 
> diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c
> index 23e872f84742..76ee559577dd 100644
> --- a/drivers/media/dvb-frontends/stv090x.c
> +++ b/drivers/media/dvb-frontends/stv090x.c
> @@ -2146,7 +2146,7 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  
>  	u32 reg;
>  	s32 car_step, steps, cur_step, dir, freq, timeout_lock;
> -	int lock = 0;
> +	int lock;
>  
>  	if (state->srate >= 10000000)
>  		timeout_lock = timeout_dmd / 3;
> @@ -2154,97 +2154,96 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  		timeout_lock = timeout_dmd / 2;
>  
>  	lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
> -	if (!lock) {
> -		if (state->srate >= 10000000) {
> -			if (stv090x_chk_tmg(state)) {
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -					goto err;
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -					goto err;
> -				lock = stv090x_get_dmdlock(state, timeout_dmd);
> -			} else {
> -				lock = 0;
> -			}
> +	if (lock)
> +		return lock;
> +
> +	if (state->srate >= 10000000) {
> +		if (stv090x_chk_tmg(state)) {
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +				goto err;
> +			lock = stv090x_get_dmdlock(state, timeout_dmd);

You can just return here...

>  		} else {
> -			if (state->srate <= 4000000)
> -				car_step = 1000;
> -			else if (state->srate <= 7000000)
> -				car_step = 2000;
> -			else if (state->srate <= 10000000)
> -				car_step = 3000;
> +			lock = 0;

and here. That way everything inside 'else' can be move one indent to the
left as well.

Regards,

	Hans

> +		}
> +	} else {
> +		if (state->srate <= 4000000)
> +			car_step = 1000;
> +		else if (state->srate <= 7000000)
> +			car_step = 2000;
> +		else if (state->srate <= 10000000)
> +			car_step = 3000;
> +		else
> +			car_step = 5000;
> +
> +		steps  = (state->search_range / 1000) / car_step;
> +		steps /= 2;
> +		steps  = 2 * (steps + 1);
> +		if (steps < 0)
> +			steps = 2;
> +		else if (steps > 12)
> +			steps = 12;
> +
> +		cur_step = 1;
> +		dir = 1;
> +
> +		freq = state->frequency;
> +		state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> +		while ((cur_step <= steps) && (!lock)) {
> +			if (dir > 0)
> +				freq += cur_step * car_step;
>  			else
> -				car_step = 5000;
> -
> -			steps  = (state->search_range / 1000) / car_step;
> -			steps /= 2;
> -			steps  = 2 * (steps + 1);
> -			if (steps < 0)
> -				steps = 2;
> -			else if (steps > 12)
> -				steps = 12;
> -
> -			cur_step = 1;
> -			dir = 1;
> -
> -			if (!lock) {
> -				freq = state->frequency;
> -				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> -				while ((cur_step <= steps) && (!lock)) {
> -					if (dir > 0)
> -						freq += cur_step * car_step;
> -					else
> -						freq -= cur_step * car_step;
> -
> -					/* Setup tuner */
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +				freq -= cur_step * car_step;
>  
> -					if (state->config->tuner_set_frequency) {
> -						if (state->config->tuner_set_frequency(fe, freq) < 0)
> -							goto err_gateoff;
> -					}
> +			/* Setup tuner */
> +			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +				goto err;
>  
> -					if (state->config->tuner_set_bandwidth) {
> -						if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> -							goto err_gateoff;
> -					}
> +			if (state->config->tuner_set_frequency) {
> +				if (state->config->tuner_set_frequency(fe, freq) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +			if (state->config->tuner_set_bandwidth) {
> +				if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					msleep(50);
> +			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +				goto err;
>  
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +			msleep(50);
>  
> -					if (state->config->tuner_get_status) {
> -						if (state->config->tuner_get_status(fe, &reg) < 0)
> -							goto err_gateoff;
> -					}
> +			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +				goto err;
>  
> -					if (reg)
> -						dprintk(FE_DEBUG, 1, "Tuner phase locked");
> -					else
> -						dprintk(FE_DEBUG, 1, "Tuner unlocked");
> +			if (state->config->tuner_get_status) {
> +				if (state->config->tuner_get_status(fe, &reg) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +			if (reg)
> +				dprintk(FE_DEBUG, 1, "Tuner phase locked");
> +			else
> +				dprintk(FE_DEBUG, 1, "Tuner unlocked");
>  
> -					STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -						goto err;
> -					lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +				goto err;
>  
> -					dir *= -1;
> -					cur_step++;
> -				}
> -			}
> +			STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> +			if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +				goto err;
> +			lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +
> +			dir *= -1;
> +			cur_step++;
>  		}
>  	}
>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


WARNING: multiple messages have this Message-ID (diff)
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Alexey Khoroshilov <khoroshilov@ispras.ru>,
	linux-media@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [patch] [media] stv090x: remove indent levels
Date: Thu, 20 Feb 2014 11:24:21 +0100	[thread overview]
Message-ID: <5305D7D5.8080906@xs4all.nl> (raw)
In-Reply-To: <20140206092800.GB31780@elgon.mountain>

Hi Dan,

This can be improved even more:

On 02/06/14 10:28, Dan Carpenter wrote:
> 1) We can flip the "if (!lock)" check to "if (lock) return lock;" and
>    then remove a big chunk of indenting.
> 2) There is a redundant "if (!lock)" which we can remove since we
>    already know that lock is zero.  This removes another indent level.
> 
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> 
> diff --git a/drivers/media/dvb-frontends/stv090x.c b/drivers/media/dvb-frontends/stv090x.c
> index 23e872f84742..76ee559577dd 100644
> --- a/drivers/media/dvb-frontends/stv090x.c
> +++ b/drivers/media/dvb-frontends/stv090x.c
> @@ -2146,7 +2146,7 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  
>  	u32 reg;
>  	s32 car_step, steps, cur_step, dir, freq, timeout_lock;
> -	int lock = 0;
> +	int lock;
>  
>  	if (state->srate >= 10000000)
>  		timeout_lock = timeout_dmd / 3;
> @@ -2154,97 +2154,96 @@ static int stv090x_get_coldlock(struct stv090x_state *state, s32 timeout_dmd)
>  		timeout_lock = timeout_dmd / 2;
>  
>  	lock = stv090x_get_dmdlock(state, timeout_lock); /* cold start wait */
> -	if (!lock) {
> -		if (state->srate >= 10000000) {
> -			if (stv090x_chk_tmg(state)) {
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -					goto err;
> -				if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -					goto err;
> -				lock = stv090x_get_dmdlock(state, timeout_dmd);
> -			} else {
> -				lock = 0;
> -			}
> +	if (lock)
> +		return lock;
> +
> +	if (state->srate >= 10000000) {
> +		if (stv090x_chk_tmg(state)) {
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +				goto err;
> +			lock = stv090x_get_dmdlock(state, timeout_dmd);

You can just return here...

>  		} else {
> -			if (state->srate <= 4000000)
> -				car_step = 1000;
> -			else if (state->srate <= 7000000)
> -				car_step = 2000;
> -			else if (state->srate <= 10000000)
> -				car_step = 3000;
> +			lock = 0;

and here. That way everything inside 'else' can be move one indent to the
left as well.

Regards,

	Hans

> +		}
> +	} else {
> +		if (state->srate <= 4000000)
> +			car_step = 1000;
> +		else if (state->srate <= 7000000)
> +			car_step = 2000;
> +		else if (state->srate <= 10000000)
> +			car_step = 3000;
> +		else
> +			car_step = 5000;
> +
> +		steps  = (state->search_range / 1000) / car_step;
> +		steps /= 2;
> +		steps  = 2 * (steps + 1);
> +		if (steps < 0)
> +			steps = 2;
> +		else if (steps > 12)
> +			steps = 12;
> +
> +		cur_step = 1;
> +		dir = 1;
> +
> +		freq = state->frequency;
> +		state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> +		while ((cur_step <= steps) && (!lock)) {
> +			if (dir > 0)
> +				freq += cur_step * car_step;
>  			else
> -				car_step = 5000;
> -
> -			steps  = (state->search_range / 1000) / car_step;
> -			steps /= 2;
> -			steps  = 2 * (steps + 1);
> -			if (steps < 0)
> -				steps = 2;
> -			else if (steps > 12)
> -				steps = 12;
> -
> -			cur_step = 1;
> -			dir = 1;
> -
> -			if (!lock) {
> -				freq = state->frequency;
> -				state->tuner_bw = stv090x_car_width(state->srate, state->rolloff) + state->srate;
> -				while ((cur_step <= steps) && (!lock)) {
> -					if (dir > 0)
> -						freq += cur_step * car_step;
> -					else
> -						freq -= cur_step * car_step;
> -
> -					/* Setup tuner */
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +				freq -= cur_step * car_step;
>  
> -					if (state->config->tuner_set_frequency) {
> -						if (state->config->tuner_set_frequency(fe, freq) < 0)
> -							goto err_gateoff;
> -					}
> +			/* Setup tuner */
> +			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +				goto err;
>  
> -					if (state->config->tuner_set_bandwidth) {
> -						if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> -							goto err_gateoff;
> -					}
> +			if (state->config->tuner_set_frequency) {
> +				if (state->config->tuner_set_frequency(fe, freq) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +			if (state->config->tuner_set_bandwidth) {
> +				if (state->config->tuner_set_bandwidth(fe, state->tuner_bw) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					msleep(50);
> +			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +				goto err;
>  
> -					if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> -						goto err;
> +			msleep(50);
>  
> -					if (state->config->tuner_get_status) {
> -						if (state->config->tuner_get_status(fe, &reg) < 0)
> -							goto err_gateoff;
> -					}
> +			if (stv090x_i2c_gate_ctrl(state, 1) < 0)
> +				goto err;
>  
> -					if (reg)
> -						dprintk(FE_DEBUG, 1, "Tuner phase locked");
> -					else
> -						dprintk(FE_DEBUG, 1, "Tuner unlocked");
> +			if (state->config->tuner_get_status) {
> +				if (state->config->tuner_get_status(fe, &reg) < 0)
> +					goto err_gateoff;
> +			}
>  
> -					if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> -						goto err;
> +			if (reg)
> +				dprintk(FE_DEBUG, 1, "Tuner phase locked");
> +			else
> +				dprintk(FE_DEBUG, 1, "Tuner unlocked");
>  
> -					STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> -						goto err;
> -					if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> -						goto err;
> -					lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +			if (stv090x_i2c_gate_ctrl(state, 0) < 0)
> +				goto err;
>  
> -					dir *= -1;
> -					cur_step++;
> -				}
> -			}
> +			STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
> +			if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0)
> +				goto err;
> +			if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x15) < 0)
> +				goto err;
> +			lock = stv090x_get_dmdlock(state, (timeout_dmd / 3));
> +
> +			dir *= -1;
> +			cur_step++;
>  		}
>  	}
>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  parent reply	other threads:[~2014-02-20 10:24 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-06  9:28 [patch] [media] stv090x: remove indent levels Dan Carpenter
2014-02-06  9:28 ` Dan Carpenter
2014-02-18  3:55 ` Manu Abraham
2014-02-18  3:55   ` Manu Abraham
2014-02-18  8:56   ` Dan Carpenter
2014-02-18  8:56     ` Dan Carpenter
2014-02-19  5:22     ` Manu Abraham
2014-02-19  5:34       ` Manu Abraham
2014-02-19  7:44       ` Dan Carpenter
2014-02-19  7:44         ` Dan Carpenter
2014-02-20  3:27         ` Manu Abraham
2014-02-20  3:39           ` Manu Abraham
2014-02-20  9:25           ` Dan Carpenter
2014-02-20  9:25             ` Dan Carpenter
2014-02-20 12:45             ` Manu Abraham
2014-02-20 12:57               ` Manu Abraham
2014-02-20 10:24 ` Hans Verkuil [this message]
2014-02-20 10:24   ` Hans Verkuil
2014-02-20 12:35   ` Dan Carpenter
2014-02-20 12:35     ` Dan Carpenter
2014-02-21  8:50   ` [patch v2] [media] stv090x: remove indent levels in stv090x_get_coldlock() Dan Carpenter
2014-02-21  8:50     ` Dan Carpenter
2014-02-21 11:45     ` walter harms
2014-02-21 11:45       ` walter harms

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5305D7D5.8080906@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=dan.carpenter@oracle.com \
    --cc=hans.verkuil@cisco.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=khoroshilov@ispras.ru \
    --cc=linux-media@vger.kernel.org \
    --cc=m.chehab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.