From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
Cc: balbi-l0cyMroinI0@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v9 0/9] USB Host support for OMAP5 uEVM
Date: Tue, 11 Mar 2014 10:48:11 +0200 [thread overview]
Message-ID: <531ECDCB.4060700@ti.com> (raw)
In-Reply-To: <1393510711-4697-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
Hi Lee,
On 02/27/2014 04:18 PM, Roger Quadros wrote:
> Hi,
>
> This patchset brings up USB Host ports and Ethernet port on
> the OMAP5 uEVM board.
>
> It also does some cleanup with respect to DT clock binding
> for the mfd/omap-usb-host driver.
>
> Please queue these for -next.
>
> Lee,
>
> I've folded some platform data dependent patches with mfd patches
> so that they don't break functionality when applied individually.
> You can safely pull in all MFD patches (1 to 6).
>
> Tony & Benoit,
>
> Can you please accept patches 7, 8 and 9?
Tony has already picked up 7,8 and 9 through omap-soc tree.
Since you acked most patches except 5 and 6, are you fine if Tony takes
all the patches 1 to 4 in this series via omap-soc tree?
What about patches 5 and 6?
cheers,
-roger
>
> Thanks.
>
> Tested on:
> - OMAP5 uEVM
> - Pandaboard ES Rev. B1
> - Beagleboard-XM Rev C2 (DT + Legacy)
> - Beagleboard Rev C4 (DT + Legacy)
>
> Changelog:
>
> v9:
> - Folded dependent platform data patches into MFD patches.
>
> v8:
> - Addressed review comments and split patch
> "mfd: omap-usb-host: Get clocks based on hardware revision"
> - Removed unnecessary usb host dummy clocks on OMAP3
> - Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
> - Rebased on 3.14-rc3
>
> v7:
> - Rebased on 3.14-rc2
> - Removed incompatible ids from DT files and examples
>
> v6:
> - Initialized clocks to -ENODEV and split patch 3.
>
> v5:
> - Expose all clocks in the DT binding document for mfd:omap-usb-host
> and mfd:omap-usb-tll
>
> v4:
> - Updated DT binding document for clock binding
>
> v3:
> - Rebased on top of 3.13-rc7
>
> cheers,
> -roger
>
> ---
> Roger Quadros (9):
> mfd: omap-usb-host: Get clocks based on hardware revision
> mfd: omap-usb-host: Always fail on clk_get() error
> mfd: omap-usb-host: Use proper clock name instead of alias
> mfd: omap-usb-host: Use clock names as per function for reference
> clocks
> mfd: omap-usb-host: Update DT clock binding information
> mfd: omap-usb-tll: Update DT clock binding information
> ARM: OMAP2+: Remove legacy_init_ehci_clk()
> ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
> usb: omap: dts: Update DT binding example usage
>
> .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
> .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
> .../devicetree/bindings/usb/ehci-omap.txt | 2 +-
> .../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4.dtsi | 10 +-
> arch/arm/boot/dts/omap5-uevm.dts | 8 +-
> arch/arm/boot/dts/omap5.dtsi | 10 +-
> arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
> arch/arm/mach-omap2/pdata-quirks.c | 16 ---
> drivers/clk/ti/clk-3xxx.c | 4 -
> drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
> 14 files changed, 135 insertions(+), 88 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 0/9] USB Host support for OMAP5 uEVM
Date: Tue, 11 Mar 2014 10:48:11 +0200 [thread overview]
Message-ID: <531ECDCB.4060700@ti.com> (raw)
In-Reply-To: <1393510711-4697-1-git-send-email-rogerq@ti.com>
Hi Lee,
On 02/27/2014 04:18 PM, Roger Quadros wrote:
> Hi,
>
> This patchset brings up USB Host ports and Ethernet port on
> the OMAP5 uEVM board.
>
> It also does some cleanup with respect to DT clock binding
> for the mfd/omap-usb-host driver.
>
> Please queue these for -next.
>
> Lee,
>
> I've folded some platform data dependent patches with mfd patches
> so that they don't break functionality when applied individually.
> You can safely pull in all MFD patches (1 to 6).
>
> Tony & Benoit,
>
> Can you please accept patches 7, 8 and 9?
Tony has already picked up 7,8 and 9 through omap-soc tree.
Since you acked most patches except 5 and 6, are you fine if Tony takes
all the patches 1 to 4 in this series via omap-soc tree?
What about patches 5 and 6?
cheers,
-roger
>
> Thanks.
>
> Tested on:
> - OMAP5 uEVM
> - Pandaboard ES Rev. B1
> - Beagleboard-XM Rev C2 (DT + Legacy)
> - Beagleboard Rev C4 (DT + Legacy)
>
> Changelog:
>
> v9:
> - Folded dependent platform data patches into MFD patches.
>
> v8:
> - Addressed review comments and split patch
> "mfd: omap-usb-host: Get clocks based on hardware revision"
> - Removed unnecessary usb host dummy clocks on OMAP3
> - Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
> - Rebased on 3.14-rc3
>
> v7:
> - Rebased on 3.14-rc2
> - Removed incompatible ids from DT files and examples
>
> v6:
> - Initialized clocks to -ENODEV and split patch 3.
>
> v5:
> - Expose all clocks in the DT binding document for mfd:omap-usb-host
> and mfd:omap-usb-tll
>
> v4:
> - Updated DT binding document for clock binding
>
> v3:
> - Rebased on top of 3.13-rc7
>
> cheers,
> -roger
>
> ---
> Roger Quadros (9):
> mfd: omap-usb-host: Get clocks based on hardware revision
> mfd: omap-usb-host: Always fail on clk_get() error
> mfd: omap-usb-host: Use proper clock name instead of alias
> mfd: omap-usb-host: Use clock names as per function for reference
> clocks
> mfd: omap-usb-host: Update DT clock binding information
> mfd: omap-usb-tll: Update DT clock binding information
> ARM: OMAP2+: Remove legacy_init_ehci_clk()
> ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
> usb: omap: dts: Update DT binding example usage
>
> .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
> .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
> .../devicetree/bindings/usb/ehci-omap.txt | 2 +-
> .../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4.dtsi | 10 +-
> arch/arm/boot/dts/omap5-uevm.dts | 8 +-
> arch/arm/boot/dts/omap5.dtsi | 10 +-
> arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
> arch/arm/mach-omap2/pdata-quirks.c | 16 ---
> drivers/clk/ti/clk-3xxx.c | 4 -
> drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
> 14 files changed, 135 insertions(+), 88 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: <lee.jones@linaro.org>, <tony@atomide.com>, <bcousson@baylibre.com>
Cc: <balbi@ti.com>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>
Subject: Re: [PATCH v9 0/9] USB Host support for OMAP5 uEVM
Date: Tue, 11 Mar 2014 10:48:11 +0200 [thread overview]
Message-ID: <531ECDCB.4060700@ti.com> (raw)
In-Reply-To: <1393510711-4697-1-git-send-email-rogerq@ti.com>
Hi Lee,
On 02/27/2014 04:18 PM, Roger Quadros wrote:
> Hi,
>
> This patchset brings up USB Host ports and Ethernet port on
> the OMAP5 uEVM board.
>
> It also does some cleanup with respect to DT clock binding
> for the mfd/omap-usb-host driver.
>
> Please queue these for -next.
>
> Lee,
>
> I've folded some platform data dependent patches with mfd patches
> so that they don't break functionality when applied individually.
> You can safely pull in all MFD patches (1 to 6).
>
> Tony & Benoit,
>
> Can you please accept patches 7, 8 and 9?
Tony has already picked up 7,8 and 9 through omap-soc tree.
Since you acked most patches except 5 and 6, are you fine if Tony takes
all the patches 1 to 4 in this series via omap-soc tree?
What about patches 5 and 6?
cheers,
-roger
>
> Thanks.
>
> Tested on:
> - OMAP5 uEVM
> - Pandaboard ES Rev. B1
> - Beagleboard-XM Rev C2 (DT + Legacy)
> - Beagleboard Rev C4 (DT + Legacy)
>
> Changelog:
>
> v9:
> - Folded dependent platform data patches into MFD patches.
>
> v8:
> - Addressed review comments and split patch
> "mfd: omap-usb-host: Get clocks based on hardware revision"
> - Removed unnecessary usb host dummy clocks on OMAP3
> - Removed unnecessary clock alias "ehci_logic_fck" for OMAP3
> - Rebased on 3.14-rc3
>
> v7:
> - Rebased on 3.14-rc2
> - Removed incompatible ids from DT files and examples
>
> v6:
> - Initialized clocks to -ENODEV and split patch 3.
>
> v5:
> - Expose all clocks in the DT binding document for mfd:omap-usb-host
> and mfd:omap-usb-tll
>
> v4:
> - Updated DT binding document for clock binding
>
> v3:
> - Rebased on top of 3.13-rc7
>
> cheers,
> -roger
>
> ---
> Roger Quadros (9):
> mfd: omap-usb-host: Get clocks based on hardware revision
> mfd: omap-usb-host: Always fail on clk_get() error
> mfd: omap-usb-host: Use proper clock name instead of alias
> mfd: omap-usb-host: Use clock names as per function for reference
> clocks
> mfd: omap-usb-host: Update DT clock binding information
> mfd: omap-usb-tll: Update DT clock binding information
> ARM: OMAP2+: Remove legacy_init_ehci_clk()
> ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
> usb: omap: dts: Update DT binding example usage
>
> .../devicetree/bindings/mfd/omap-usb-host.txt | 23 ++++
> .../devicetree/bindings/mfd/omap-usb-tll.txt | 10 ++
> .../devicetree/bindings/usb/ehci-omap.txt | 2 +-
> .../devicetree/bindings/usb/ohci-omap3.txt | 2 +-
> arch/arm/boot/dts/omap3.dtsi | 4 +-
> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 +-
> arch/arm/boot/dts/omap4.dtsi | 10 +-
> arch/arm/boot/dts/omap5-uevm.dts | 8 +-
> arch/arm/boot/dts/omap5.dtsi | 10 +-
> arch/arm/mach-omap2/cclock3xxx_data.c | 4 -
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 6 --
> arch/arm/mach-omap2/pdata-quirks.c | 16 ---
> drivers/clk/ti/clk-3xxx.c | 4 -
> drivers/mfd/omap-usb-host.c | 116 ++++++++++++++-------
> 14 files changed, 135 insertions(+), 88 deletions(-)
>
next prev parent reply other threads:[~2014-03-11 8:48 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 14:18 [PATCH v9 0/9] USB Host support for OMAP5 uEVM Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` [PATCH v9 1/9] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-03-10 14:14 ` Lee Jones
2014-03-10 14:14 ` Lee Jones
2014-03-10 14:14 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 2/9] mfd: omap-usb-host: Always fail on clk_get() error Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-03-10 14:17 ` Lee Jones
2014-03-10 14:17 ` Lee Jones
2014-03-10 14:17 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 3/9] mfd: omap-usb-host: Use proper clock name instead of alias Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-03-10 14:32 ` Lee Jones
2014-03-10 14:32 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 4/9] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-03-10 14:34 ` Lee Jones
2014-03-10 14:34 ` Lee Jones
2014-03-10 14:34 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 5/9] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` [PATCH v9 6/9] mfd: omap-usb-tll: " Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` [PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` [PATCH v9 8/9] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` [PATCH v9 9/9] usb: omap: dts: Update DT binding example usage Roger Quadros
2014-02-27 14:18 ` Roger Quadros
2014-02-27 14:18 ` Roger Quadros
[not found] ` <1393510711-4697-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-02-28 22:56 ` [PATCH v9 0/9] USB Host support for OMAP5 uEVM Tony Lindgren
2014-02-28 22:56 ` Tony Lindgren
2014-02-28 22:56 ` Tony Lindgren
[not found] ` <20140228225627.GU13624-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2014-03-03 9:34 ` Roger Quadros
2014-03-03 9:34 ` Roger Quadros
2014-03-03 9:34 ` Roger Quadros
[not found] ` <53144CBC.2050607-l0cyMroinI0@public.gmane.org>
2014-03-04 18:47 ` Tony Lindgren
2014-03-04 18:47 ` Tony Lindgren
2014-03-04 18:47 ` Tony Lindgren
2014-03-11 8:48 ` Roger Quadros [this message]
2014-03-11 8:48 ` Roger Quadros
2014-03-11 8:48 ` Roger Quadros
[not found] ` <531ECDCB.4060700-l0cyMroinI0@public.gmane.org>
2014-03-11 12:02 ` Lee Jones
2014-03-11 12:02 ` Lee Jones
2014-03-11 12:02 ` Lee Jones
2014-03-11 12:16 ` Roger Quadros
2014-03-11 12:16 ` Roger Quadros
2014-03-11 12:16 ` Roger Quadros
2014-03-11 13:07 ` Lee Jones
2014-03-11 13:07 ` Lee Jones
2014-03-11 13:10 ` Roger Quadros
2014-03-11 13:10 ` Roger Quadros
2014-03-11 13:10 ` Roger Quadros
2014-03-11 16:24 ` Tony Lindgren
2014-03-11 16:24 ` Tony Lindgren
2014-03-13 22:34 ` Lee Jones
2014-03-13 22:34 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=531ECDCB.4060700@ti.com \
--to=rogerq-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.