* [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359
@ 2014-04-22 4:40 vattipalli
0 siblings, 0 replies; 5+ messages in thread
From: vattipalli @ 2014-04-22 4:40 UTC (permalink / raw)
To: xenomai
hi,
I am working on Ti Am3359 processor with linux-3.2 kernel. I am trying
to port Xenomai. I have applied ipipe-core-3.2.21-arm-4.patch patch,
and compiled the kernel. But when booting uImage it hanged at
Uncompressing Linux... done, booting the kernel. I could not see any
console after this. But the above patch Support for CSR SiRFSoC ARM
Cortex A9 Platform. Could i get any patch for ARM Cortex A9 Platform for
linux-3.2 kernel.
Thanks In Advance
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359
@ 2014-04-22 5:08 vattipalli
2014-04-22 10:14 ` Gilles Chanteperdrix
0 siblings, 1 reply; 5+ messages in thread
From: vattipalli @ 2014-04-22 5:08 UTC (permalink / raw)
To: xenomai
hi,
I am working on Ti Am3359 processor with linux-3.2 kernel. I am trying to port Xenomai. I have applied ipipe-core-3.2.21-arm-4.patch patch, and compiled the kernel. But when booting uImage it hanged at
Uncompressing Linux... done, booting the kernel.
I could not see any console after this. But the above patch Support for CSR SiRFSoC ARM Cortex A9 Platform. Could i get any patch for ARM Cortex A8 Platform(Ti AM3359) for linux-3.2 kernel.
Thanks In Advance
Praveen
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359
2014-04-22 5:08 vattipalli
@ 2014-04-22 10:14 ` Gilles Chanteperdrix
2014-04-24 7:02 ` vattipalli
0 siblings, 1 reply; 5+ messages in thread
From: Gilles Chanteperdrix @ 2014-04-22 10:14 UTC (permalink / raw)
To: vattipalli; +Cc: xenomai
On 04/22/2014 07:08 AM, vattipalli wrote:
> hi, I am working on Ti Am3359 processor with linux-3.2 kernel. I am
> trying to port Xenomai. I have applied ipipe-core-3.2.21-arm-4.patch
> patch, and compiled the kernel. But when booting uImage it hanged at
>
> Uncompressing Linux... done, booting the kernel. I could not see any
> console after this.
The I-pipe patch for Linux 3.2 does not support Am33xx processors. And
in fact has known bugs, so is not recommended at all. We have more
recent patches for Linux 3.8 and Linux 3.10. See the help for beaglebone
in ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources.
> But the above patch Support for CSR SiRFSoC ARM
> Cortex A9 Platform.
I do not understand this sentence.
> Could i get any patch for ARM Cortex A8
> Platform(Ti AM3359) for linux-3.2 kernel.
No.
--
Gilles.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359
2014-04-22 10:14 ` Gilles Chanteperdrix
@ 2014-04-24 7:02 ` vattipalli
2014-04-24 10:29 ` Gilles Chanteperdrix
0 siblings, 1 reply; 5+ messages in thread
From: vattipalli @ 2014-04-24 7:02 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: xenomai
Hi Gilles,
Thanks for your help.
As per your suggestion, instead of working on linux-3.2 kernel for
Am3359, I want to configure Xenomai for 3.13 kernel. Can i get any
patches for kernel 3.13 kernel. Because I have gone through
ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources, I found patches
for 3.8 kernel for Beaglebone.
Thanks & Regards
Praveen
On Tuesday 22 April 2014 03:44 PM, Gilles Chanteperdrix wrote:
> On 04/22/2014 07:08 AM, vattipalli wrote:
>> hi, I am working on Ti Am3359 processor with linux-3.2 kernel. I am
>> trying to port Xenomai. I have applied ipipe-core-3.2.21-arm-4.patch
>> patch, and compiled the kernel. But when booting uImage it hanged at
>>
>> Uncompressing Linux... done, booting the kernel. I could not see any
>> console after this.
> The I-pipe patch for Linux 3.2 does not support Am33xx processors. And
> in fact has known bugs, so is not recommended at all. We have more
> recent patches for Linux 3.8 and Linux 3.10. See the help for beaglebone
> in ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources.
>
>
>> But the above patch Support for CSR SiRFSoC ARM
>> Cortex A9 Platform.
> I do not understand this sentence.
>
>> Could i get any patch for ARM Cortex A8
>> Platform(Ti AM3359) for linux-3.2 kernel.
> No.
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359
2014-04-24 7:02 ` vattipalli
@ 2014-04-24 10:29 ` Gilles Chanteperdrix
0 siblings, 0 replies; 5+ messages in thread
From: Gilles Chanteperdrix @ 2014-04-24 10:29 UTC (permalink / raw)
To: vattipalli; +Cc: xenomai
On 04/24/2014 09:02 AM, vattipalli wrote:
> Hi Gilles,
> Thanks for your help.
>
> As per your suggestion, instead of working on linux-3.2 kernel for
> Am3359, I want to configure Xenomai for 3.13 kernel. Can i get any
> patches for kernel 3.13 kernel. Because I have gone through
> ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources, I found patches
> for 3.8 kernel for Beaglebone.
No, there are only patches for 3.8 and 3.10, there should be patches for
3.14 soon.
--
Gilles.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-24 10:29 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-22 4:40 [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359 vattipalli
-- strict thread matches above, loose matches on Subject: below --
2014-04-22 5:08 vattipalli
2014-04-22 10:14 ` Gilles Chanteperdrix
2014-04-24 7:02 ` vattipalli
2014-04-24 10:29 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.