* [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-17 8:45 ` Antoine Ténart
0 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: linux-arm-kernel
After adding support for the Berlin BG2Q GPIOs, this series uses the
same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
Applies on top of Sebastian's for-next branch[1].
[1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
Antoine T?nart (2):
ARM: dts: berlin: add the BG2 GPIO nodes
ARM: dts: berlin: add the BG2CD GPIO nodes
arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
2 files changed, 207 insertions(+)
--
1.8.3.2
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-17 8:45 ` Antoine Ténart
0 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w
Cc: Antoine Ténart,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
zmxu-eYqpPyKDWXRBDgjK7y7TUQ, jszhang-eYqpPyKDWXRBDgjK7y7TUQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
After adding support for the Berlin BG2Q GPIOs, this series uses the
same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
Applies on top of Sebastian's for-next branch[1].
[1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
Antoine Ténart (2):
ARM: dts: berlin: add the BG2 GPIO nodes
ARM: dts: berlin: add the BG2CD GPIO nodes
arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
2 files changed, 207 insertions(+)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-17 8:45 ` Antoine Ténart
0 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: sebastian.hesselbarth
Cc: Antoine Ténart, alexandre.belloni, zmxu, jszhang,
linux-arm-kernel, devicetree, linux-kernel
After adding support for the Berlin BG2Q GPIOs, this series uses the
same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
Applies on top of Sebastian's for-next branch[1].
[1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
Antoine Ténart (2):
ARM: dts: berlin: add the BG2 GPIO nodes
ARM: dts: berlin: add the BG2CD GPIO nodes
arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
2 files changed, 207 insertions(+)
--
1.8.3.2
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: dts: berlin: add the BG2 GPIO nodes
2014-04-17 8:45 ` Antoine Ténart
@ 2014-04-17 8:45 ` Antoine Ténart
-1 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: linux-arm-kernel
The Berlin BG2 has 32 GPIOs in SoC power domain and 16 in the SM one.
Only the first 8 SM GPIOs have interrupt support.
Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 4d85312dc17a..57cadd31f4e1 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -99,6 +99,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
+ gpio0: gpio at 0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio at 0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port at 1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio at 0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port at 2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio at 1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port at 3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer at 2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -194,6 +266,39 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio at 5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port at 5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio0: gpio at c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port at 4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <11>;
+ };
+ };
+
uart0: serial at 9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: dts: berlin: add the BG2 GPIO nodes
@ 2014-04-17 8:45 ` Antoine Ténart
0 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: sebastian.hesselbarth
Cc: Antoine Ténart, alexandre.belloni, zmxu, jszhang,
linux-arm-kernel, devicetree, linux-kernel
The Berlin BG2 has 32 GPIOs in SoC power domain and 16 in the SM one.
Only the first 8 SM GPIOs have interrupt support.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 4d85312dc17a..57cadd31f4e1 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -99,6 +99,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -194,6 +266,39 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <11>;
+ };
+ };
+
uart0: serial@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: berlin: add the BG2CD GPIO nodes
2014-04-17 8:45 ` Antoine Ténart
@ 2014-04-17 8:45 ` Antoine Ténart
-1 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: linux-arm-kernel
The Berlin BG2CD has 32 GPIOs in SoC power domain and 16 in the SM one.
Signed-off-by: Antoine T?nart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..6eb1bdae23ac 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -87,6 +87,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
+ gpio0: gpio at 0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port at 0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio at 0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port at 1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio at 0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port at 2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio at 1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port at 3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer at 2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -177,6 +249,36 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio at 5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port at 5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio0: gpio at c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port at 4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
uart0: serial at 9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: berlin: add the BG2CD GPIO nodes
@ 2014-04-17 8:45 ` Antoine Ténart
0 siblings, 0 replies; 10+ messages in thread
From: Antoine Ténart @ 2014-04-17 8:45 UTC (permalink / raw)
To: sebastian.hesselbarth
Cc: Antoine Ténart, alexandre.belloni, zmxu, jszhang,
linux-arm-kernel, devicetree, linux-kernel
The Berlin BG2CD has 32 GPIOs in SoC power domain and 16 in the SM one.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..6eb1bdae23ac 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -87,6 +87,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -177,6 +249,36 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <8>;
+ reg = <0>;
+ };
+ };
+
uart0: serial@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-22 18:08 ` Sebastian Hesselbarth
0 siblings, 0 replies; 10+ messages in thread
From: Sebastian Hesselbarth @ 2014-04-22 18:08 UTC (permalink / raw)
To: linux-arm-kernel
On 04/17/2014 10:45 AM, Antoine T?nart wrote:
> After adding support for the Berlin BG2Q GPIOs, this series uses the
> same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
>
> Applies on top of Sebastian's for-next branch[1].
>
> [1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
>
> Antoine T?nart (2):
> ARM: dts: berlin: add the BG2 GPIO nodes
> ARM: dts: berlin: add the BG2CD GPIO nodes
>
> arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 207 insertions(+)
>
Both applied to berlin/dt.
Thanks!
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-22 18:08 ` Sebastian Hesselbarth
0 siblings, 0 replies; 10+ messages in thread
From: Sebastian Hesselbarth @ 2014-04-22 18:08 UTC (permalink / raw)
To: Antoine Ténart
Cc: alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
zmxu-eYqpPyKDWXRBDgjK7y7TUQ, jszhang-eYqpPyKDWXRBDgjK7y7TUQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 04/17/2014 10:45 AM, Antoine Ténart wrote:
> After adding support for the Berlin BG2Q GPIOs, this series uses the
> same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
>
> Applies on top of Sebastian's for-next branch[1].
>
> [1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
>
> Antoine Ténart (2):
> ARM: dts: berlin: add the BG2 GPIO nodes
> ARM: dts: berlin: add the BG2CD GPIO nodes
>
> arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 207 insertions(+)
>
Both applied to berlin/dt.
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD
@ 2014-04-22 18:08 ` Sebastian Hesselbarth
0 siblings, 0 replies; 10+ messages in thread
From: Sebastian Hesselbarth @ 2014-04-22 18:08 UTC (permalink / raw)
To: Antoine Ténart
Cc: alexandre.belloni, zmxu, jszhang, linux-arm-kernel, devicetree,
linux-kernel
On 04/17/2014 10:45 AM, Antoine Ténart wrote:
> After adding support for the Berlin BG2Q GPIOs, this series uses the
> same GPIO dwapb driver to support the Berlin BG2 and BG2CD GPIOs.
>
> Applies on top of Sebastian's for-next branch[1].
>
> [1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
>
> Antoine Ténart (2):
> ARM: dts: berlin: add the BG2 GPIO nodes
> ARM: dts: berlin: add the BG2CD GPIO nodes
>
> arch/arm/boot/dts/berlin2.dtsi | 105 +++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/berlin2cd.dtsi | 102 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 207 insertions(+)
>
Both applied to berlin/dt.
Thanks!
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-04-22 18:08 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-17 8:45 [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD Antoine Ténart
2014-04-17 8:45 ` Antoine Ténart
2014-04-17 8:45 ` Antoine Ténart
2014-04-17 8:45 ` [PATCH 1/2] ARM: dts: berlin: add the BG2 GPIO nodes Antoine Ténart
2014-04-17 8:45 ` Antoine Ténart
2014-04-17 8:45 ` [PATCH 2/2] ARM: dts: berlin: add the BG2CD " Antoine Ténart
2014-04-17 8:45 ` Antoine Ténart
2014-04-22 18:08 ` [PATCH 0/2] Add GPIO nodes for Berlin BG2 and BG2CD Sebastian Hesselbarth
2014-04-22 18:08 ` Sebastian Hesselbarth
2014-04-22 18:08 ` Sebastian Hesselbarth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.