[PATCH 0/7] Add Allwinner A31 USB support

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 05/07/2014 05:50 AM, Maxime Ripard wrote:
> Hi everyone,
> 
> This patchset adds support for the USB controllers found in the
> Allwinner A31.
> 
> While the design is similar to the earlier Allwinner SoCs that are
> already supported, a few details here and there change, like the fact
> that the PHYs now have one clock per phy, while it used to be only one
> for all the PHYs.
> 
> Thanks,
> Maxime

Thanks for working on this.

Looks good, the entire series is:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> 
> Boris BREZILLON (2):
>   usb: ehci-platform: add optional reset controller retrieval
>   ARM: sunxi: dt: add APP4-EVB1 board support
> 
> Maxime Ripard (5):
>   clk: sunxi: Implement A31 USB clock
>   ARM: sun6i: Add the USB clocks to the DTSI.
>   phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
>   usb: ohci-platform: Enable optional use of reset controller
>   ARM: sun6i: dt: Add support for the USB controllers
> 
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  1 +
>  Documentation/devicetree/bindings/usb/usb-ohci.txt |  1 +
>  arch/arm/boot/dts/Makefile                         |  1 +
>  arch/arm/boot/dts/sun6i-a31-app4-evb1.dts          | 63 ++++++++++++++++
>  arch/arm/boot/dts/sun6i-a31.dtsi                   | 88 ++++++++++++++++++++++
>  drivers/clk/sunxi/clk-sunxi.c                      |  6 ++
>  drivers/phy/phy-sun4i-usb.c                        | 35 ++++++---
>  drivers/usb/host/ehci-platform.c                   | 25 +++++-
>  drivers/usb/host/ohci-platform.c                   | 25 +++++-
>  9 files changed, 234 insertions(+), 11 deletions(-)
>  create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
>