From: Tomasz Figa <tomasz.figa@gmail.com>
To: Rahul Sharma <rahul.sharma@samsung.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com, joshi@samsung.com,
r.sh.open@gmail.com
Subject: Re: [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board
Date: Wed, 14 May 2014 21:50:44 +0200 [thread overview]
Message-ID: <5373C914.1050909@gmail.com> (raw)
In-Reply-To: <1400035562-16832-4-git-send-email-rahul.sharma@samsung.com>
Hi Rahul,
On 14.05.2014 04:46, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Enable hdmi for exynos5420 based peach-pit board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 19 +++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
> arch/arm/boot/dts/exynos5420.dtsi | 5 +++++
> 3 files changed, 31 insertions(+)
[snip]
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index ba686e4..fc17797 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -66,6 +66,13 @@
> samsung,pin-pud = <0>;
> samsung,pin-drv = <0>;
> };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
Same comment as for patch 1/5.
> + };
> };
>
> pinctrl@13410000 {
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 016992c..df4422c 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -648,9 +648,14 @@
> <&clock CLK_MOUT_HDMI>;
> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
> "sclk_hdmiphy", "mout_hdmi";
> + phy = <&hdmiphy>;
> status = "disabled";
> };
>
> + hdmiphy: hdmiphy@145D0000 {
> + reg = <0x145D0000 0x20>;
> + };
Hmm, this doesn't seem like a proper device node and I don't see other
properties present in exynos5.dtsi either. Are all the necessary patches
already merged in linux-next?
Best regards,
Tomasz
WARNING: multiple messages have this Message-ID (diff)
From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board
Date: Wed, 14 May 2014 21:50:44 +0200 [thread overview]
Message-ID: <5373C914.1050909@gmail.com> (raw)
In-Reply-To: <1400035562-16832-4-git-send-email-rahul.sharma@samsung.com>
Hi Rahul,
On 14.05.2014 04:46, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
>
> Enable hdmi for exynos5420 based peach-pit board.
>
> Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 19 +++++++++++++++++++
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
> arch/arm/boot/dts/exynos5420.dtsi | 5 +++++
> 3 files changed, 31 insertions(+)
[snip]
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> index ba686e4..fc17797 100644
> --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -66,6 +66,13 @@
> samsung,pin-pud = <0>;
> samsung,pin-drv = <0>;
> };
> +
> + hdmi_hpd_irq: hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <1>;
> + samsung,pin-drv = <0>;
Same comment as for patch 1/5.
> + };
> };
>
> pinctrl at 13410000 {
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 016992c..df4422c 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -648,9 +648,14 @@
> <&clock CLK_MOUT_HDMI>;
> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
> "sclk_hdmiphy", "mout_hdmi";
> + phy = <&hdmiphy>;
> status = "disabled";
> };
>
> + hdmiphy: hdmiphy at 145D0000 {
> + reg = <0x145D0000 0x20>;
> + };
Hmm, this doesn't seem like a proper device node and I don't see other
properties present in exynos5.dtsi either. Are all the necessary patches
already merged in linux-next?
Best regards,
Tomasz
next prev parent reply other threads:[~2014-05-14 19:50 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 2:45 [PATCH v4 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-14 2:45 ` Rahul Sharma
2014-05-14 2:45 ` [PATCH v4 1/5] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-14 2:45 ` Rahul Sharma
2014-05-14 19:41 ` Tomasz Figa
2014-05-14 19:41 ` Tomasz Figa
2014-05-15 5:22 ` Rahul Sharma
2014-05-15 5:22 ` Rahul Sharma
2014-05-14 2:45 ` [PATCH v4 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-14 2:45 ` Rahul Sharma
2014-05-14 19:44 ` Tomasz Figa
2014-05-14 19:44 ` Tomasz Figa
2014-05-15 5:25 ` Rahul Sharma
2014-05-15 5:25 ` Rahul Sharma
2014-05-14 2:46 ` [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-14 2:46 ` Rahul Sharma
2014-05-14 19:50 ` Tomasz Figa [this message]
2014-05-14 19:50 ` Tomasz Figa
2014-05-15 5:46 ` Rahul Sharma
2014-05-15 5:46 ` Rahul Sharma
2014-05-14 2:46 ` [PATCH v4 4/5] ARM: dts: remove chip specific hdmi hpd pin from board Rahul Sharma
2014-05-14 2:46 ` Rahul Sharma
2014-05-14 18:45 ` Kukjin Kim
2014-05-14 18:45 ` Kukjin Kim
2014-05-14 19:23 ` Rahul Sharma
2014-05-14 19:23 ` Rahul Sharma
2014-05-14 19:51 ` Tomasz Figa
2014-05-14 19:51 ` Tomasz Figa
2014-05-15 5:47 ` Rahul Sharma
2014-05-15 5:47 ` Rahul Sharma
2014-05-14 2:46 ` [PATCH v4 5/5] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-14 2:46 ` Rahul Sharma
2014-05-14 19:56 ` Tomasz Figa
2014-05-14 19:56 ` Tomasz Figa
2014-05-14 19:57 ` Tomasz Figa
2014-05-14 19:57 ` Tomasz Figa
2014-05-15 8:27 ` Rahul Sharma
2014-05-15 8:27 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5373C914.1050909@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=rahul.sharma@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.