Re: [PATCH 3/4] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 957 bytes --]

On 14/05/14 00:26, Tony Lindgren wrote:

> +	/* lcd MO */
> +	ddata->mo_gpio = sharp_ls_get_gpio_of(&pdev->dev, 0, 1, "mode");
> +	if (PTR_ERR(ddata->mo_gpio) == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +
> +	if (!IS_ERR(ddata->mo_gpio))
> +		if (gpiod_get_raw_value_cansleep(ddata->mo_gpio))
> +			ddata->flags |= SHARP_LS_QVGA;

Shouldn't there be an explicit flag in the DT data for this? If the
panel's MO pin is hardwired to, say, pull up, then the mode-gpios won't
have MO gpio, right? So something like:


mode-gpios = <0					/* high, lcd MO */
	      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
	      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */

vga-mode;	/* MO hardwired high */



Btw, the gpio.txt has each gpio inside <>:

chipsel-gpios = <&gpio1 12 0>,
		 <&gpio1 13 0>,
		 <0>, /* holes are permitted, means no GPIO 2 */
		 <&gpio2 2>;

Is that equivalent to having all gpios inside <>?

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]