Re: [PATCH v3 08/13] ARM: edma: Get IP configuration from HW (number of channels, tc, etc)

[Joel Fernandes <joelf@ti.com>]

On 05/16/2014 07:17 AM, Peter Ujfalusi wrote:
> From CCCFG register of eDMA3 we can get all the needed information for the
> driver about the IP:
> Number of channels: NUM_DMACH
> Number of regions: NUM_REGN
> Number of slots (PaRAM sets): NUM_PAENTRY
> Number of TC/EQ: NUM_EVQUE
> 
> In case when booted with DT or the queue_priority_mapping is not provided
> set up a default priority map.

Thanks.

Acked-by: Joel Fernandes <joelf@ti.com>


> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  arch/arm/common/edma.c | 115 +++++++++++++++++++++++++++++++------------------
>  1 file changed, 73 insertions(+), 42 deletions(-)
> 
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index aa9473cb0c23..485be42519b9 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -102,7 +102,13 @@
>  #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
>  
>  #define EDMA_DCHMAP	0x0100  /* 64 registers */
> -#define CHMAP_EXIST	BIT(24)
> +
> +/* CCCFG register */
> +#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
> +#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
> +#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
> +#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
> +#define CHMAP_EXIST		BIT(24)
>  
>  #define EDMA_MAX_DMACH           64
>  #define EDMA_MAX_PARAMENTRY     512
> @@ -1408,6 +1414,67 @@ void edma_clear_event(unsigned channel)
>  }
>  EXPORT_SYMBOL(edma_clear_event);
>  
> +static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
> +			      struct edma *edma_cc)
> +{
> +	int i;
> +	u32 value, cccfg;
> +	s8 (*queue_priority_map)[2];
> +
> +	/* Decode the eDMA3 configuration from CCCFG register */
> +	cccfg = edma_read(0, EDMA_CCCFG);
> +
> +	value = GET_NUM_REGN(cccfg);
> +	edma_cc->num_region = BIT(value);
> +
> +	value = GET_NUM_DMACH(cccfg);
> +	edma_cc->num_channels = BIT(value + 1);
> +
> +	value = GET_NUM_PAENTRY(cccfg);
> +	edma_cc->num_slots = BIT(value + 4);
> +
> +	value = GET_NUM_EVQUE(cccfg);
> +	edma_cc->num_tc = value + 1;
> +
> +	dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg);
> +	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
> +	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
> +	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
> +	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
> +
> +	/* Nothing need to be done if queue priority is provided */
> +	if (pdata->queue_priority_mapping)
> +		return 0;
> +
> +	/*
> +	 * Configure TC/queue priority as follows:
> +	 * Q0 - priority 0
> +	 * Q1 - priority 1
> +	 * Q2 - priority 2
> +	 * ...
> +	 * The meaning of priority numbers: 0 highest priority, 7 lowest
> +	 * priority. So Q0 is the highest priority queue and the last queue has
> +	 * the lowest priority.
> +	 */
> +	queue_priority_map = devm_kzalloc(dev,
> +					  (edma_cc->num_tc + 1) * sizeof(s8),
> +					  GFP_KERNEL);
> +	if (!queue_priority_map)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < edma_cc->num_tc; i++) {
> +		queue_priority_map[i][0] = i;
> +		queue_priority_map[i][1] = i;
> +	}
> +	queue_priority_map[i][0] = -1;
> +	queue_priority_map[i][1] = -1;
> +
> +	pdata->queue_priority_mapping = queue_priority_map;
> +	pdata->default_queue = 0;
> +
> +	return 0;
> +}
> +
>  #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
>  
>  static int edma_xbar_event_map(struct device *dev, struct device_node *node,
> @@ -1458,50 +1525,16 @@ static int edma_of_parse_dt(struct device *dev,
>  			    struct device_node *node,
>  			    struct edma_soc_info *pdata)
>  {
> -	int ret = 0, i;
> -	u32 value;
> +	int ret = 0;
>  	struct property *prop;
>  	size_t sz;
>  	struct edma_rsv_info *rsv_info;
> -	s8 (*queue_priority_map)[2];
> -
> -	ret = of_property_read_u32(node, "dma-channels", &value);
> -	if (ret < 0)
> -		return ret;
> -	pdata->n_channel = value;
> -
> -	ret = of_property_read_u32(node, "ti,edma-regions", &value);
> -	if (ret < 0)
> -		return ret;
> -	pdata->n_region = value;
> -
> -	ret = of_property_read_u32(node, "ti,edma-slots", &value);
> -	if (ret < 0)
> -		return ret;
> -	pdata->n_slot = value;
> -
> -	pdata->n_tc = 3;
>  
>  	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
>  	if (!rsv_info)
>  		return -ENOMEM;
>  	pdata->rsv = rsv_info;
>  
> -	queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
> -	if (!queue_priority_map)
> -		return -ENOMEM;
> -
> -	for (i = 0; i < 3; i++) {
> -		queue_priority_map[i][0] = i;
> -		queue_priority_map[i][1] = i;
> -	}
> -	queue_priority_map[i][0] = -1;
> -	queue_priority_map[i][1] = -1;
> -
> -	pdata->queue_priority_mapping = queue_priority_map;
> -
> -	pdata->default_queue = 0;
> -
>  	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
>  	if (prop)
>  		ret = edma_xbar_event_map(dev, node, pdata, sz);
> @@ -1621,14 +1654,12 @@ static int edma_probe(struct platform_device *pdev)
>  		if (!edma_cc[j])
>  			return -ENOMEM;
>  
> -		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
> -							EDMA_MAX_DMACH);
> -		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
> -							EDMA_MAX_PARAMENTRY);
> -		edma_cc[j]->num_tc = info[j]->n_tc;
> +		/* Get eDMA3 configuration from IP */
> +		ret = edma_setup_from_hw(dev, info[j], edma_cc[j]);
> +		if (ret)
> +			return ret;
>  
>  		edma_cc[j]->default_queue = info[j]->default_queue;
> -		edma_cc[j]->num_region = info[j]->n_region;
>  
>  		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
>  			edmacc_regs_base[j]);
>