[lm-sensors] AMD K10 yet?

[lm-sensors] AMD K10 yet?

[C Leonhardt]

Hi, just wondered if AMD K10 chips are supported yet? I searched the list for this topic and see a patch from Oct 08, but it's confusing whether this patch is working or not because of some errata on AMD's part. I see we also have IT8720 capability according to sensors-detect, but this is not available yet for us to use either.  Is there any (other) way to monitor temperatures on this platform (Asus M4N78 pro motherboard, AMD Phenom II Deneb 920 cpu)?

Thanks in advance for any info :)

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] AMD K10 yet?

[geza gaz]

[-- Attachment #1.1: Type: text/plain, Size: 2714 bytes --]



>Hi, just wondered if AMD K10 chips are supported yet? I searched the list for 
>this topic and see a patch from Oct 08, but it's confusing whether this patch 
>is working or not because of some errata on AMD's part. I see we also have 
>IT8720 capability according to sensors-detect, but this is not available yet 
>for us to use either.  Is there any (other) way to monitor temperatures on 
>this platform (Asus M4N78 pro motherboard, AMD Phenom II Deneb 920 cpu)?
>
>Thanks in advance for any info :)

Hi, i also try to get CPU temp info from a system we just got. It is 
Tyan Thunder s4985g3nr-e motherboard with an additional cpu board, so we have
 8 Opterons, qadcore all. I downloaded the rewritten k8temp source and 
recompiled. Also downloaded lm_sensors 3.1.0 and installed it. Using the new 
k8temp module and the new sensors, the output i get is:

w83627hf-isa-0c00
Adapter: ISA adapter
in0:         +1.78 V  (min =  +0.00 V, max =  +4.08 V)
in1:         +1.76 V  (min =  +0.00 V, max =  +4.08 V)
in2:         +3.36 V  (min =  +2.82 V, max =  +3.79 V)
in3:         +2.96 V  (min =  +4.02 V, max =  +2.48 V)
in4:         +1.46 V  (min =  +4.08 V, max =  +4.08 V)
in5:         +1.49 V  (min =  +4.08 V, max =  +4.08 V)
in6:         +1.17 V  (min =  +4.08 V, max =  +4.08 V)
in7:         +3.33 V  (min =  +4.08 V, max =  +4.08 V)
in8:         +0.06 V  (min =  +4.08 V, max =  +4.08 V)
fan1:          0 RPM  (min =    0 RPM, div = 2)
fan2:          0 RPM  (min =    0 RPM, div = 2)
fan3:          0 RPM  (min =    0 RPM, div = 2)
temp1:       +32.0 C  (high =  -1.0 C, hyst =  -1.0 C)  sensor = thermistor
temp2:       +32.5 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
temp3:       +34.5 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
cpu0_vid:   +0.000 V
beep_enable:enabled

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +7.5 C                                    

k10temp-pci-00cb
Adapter: PCI adapter
temp1:       +17.5 C                                    

k10temp-pci-00d3
Adapter: PCI adapter
temp1:        +8.5 C                                    

k10temp-pci-00db
Adapter: PCI adapter
temp1:        +8.0 C                                    

k10temp-pci-00e3
Adapter: PCI adapter
temp1:       +12.0 C                                    

k10temp-pci-00eb
Adapter: PCI adapter
temp1:        +4.5 C                                    

k10temp-pci-00f3
Adapter: PCI adapter
temp1:        +4.4 C                                    

k10temp-pci-00fb
Adapter: PCI adapter
temp1:        +7.5 C


I know the temps are supposed to be relative to some value, this is just 
the point where i currently am. Also the 8 cpus, not all the cores are reported.

Peter



      

[-- Attachment #1.2: Type: text/html, Size: 3255 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors