All of lore.kernel.org
 help / color / mirror / Atom feed
From: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI
Date: Tue, 03 Jun 2014 04:36:33 +0000	[thread overview]
Message-ID: <538D50D1.7010900@renesas.com> (raw)
In-Reply-To: <1401716531-29794-1-git-send-email-geert+renesas@glider.be>

Hi Geert,

Thanks for the patches.

I think this patch series should be divided into 2 parts,
one for DMA in general and one for DMA supporting QSPI.

How do you think about it ?

Best regards,
KHIEM Nguyen

On 6/2/2014 10:42 PM, Geert Uytterhoeven wrote:
> This patch series enables DMA support for QSPI on r8a7791/koelsch
> reference.  It's independent from the series "ARM: shmobile: koelsch
> legacy: Enable DMA for QSPI", but it depends on the SHDMA work for r8a7790
> by Ben Dooks (cfr. "[PATCH v2 0/9] Updates Renesas OF-DMA code").
>
> Changes Compared to previous submission ("[PATCH/RFC 0/7] ARM: shmobile:
> r8a7791: Add preliminary DMA support"):
>    - "[6/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF" was dropped,
>    - 2/7 was added,
>    - 7/7 was changed (see changelog in individual patch).
>
> This was tested on r8a7791/koelsch.
>
> Performance figures for reading from a QSPI FLASH driven at 24.375 MHz are:
>    - Single:  1.1 Mbps PIO, 23 Mbps DMA
>    - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
>    - Quad  : 13   Mbps PIO, 70 Mbps DMA
>
> Thanks for your comments!
>
>    [1/7] DMA: shdma: Add r8a7791 support
>    [2/7] DMA: shdma: Spelling s/controll/control/
>    [3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks
>    [4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings
>    [5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes
>    [6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1
>    [7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
>
>   Documentation/devicetree/bindings/dma/shdma.txt |   7 +-
>   arch/arm/boot/dts/r8a7791-koelsch.dts           |   8 ++
>   arch/arm/boot/dts/r8a7791.dtsi                  |  79 ++++++++++++++++-
>   drivers/dma/sh/shdmac.c                         |   1 +
>   include/dt-bindings/dma/r8a7791-dma.h           | 111 ++++++++++++++++++++++++
>   5 files changed, 201 insertions(+), 5 deletions(-)
>   create mode 100644 include/dt-bindings/dma/r8a7791-dma.h
>
> Gr{oetje,eeting}s,
>
> 						Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> 							    -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


WARNING: multiple messages have this Message-ID (diff)
From: khiem.nguyen.xt@renesas.com (Khiem Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI
Date: Tue, 03 Jun 2014 13:36:33 +0900	[thread overview]
Message-ID: <538D50D1.7010900@renesas.com> (raw)
In-Reply-To: <1401716531-29794-1-git-send-email-geert+renesas@glider.be>

Hi Geert,

Thanks for the patches.

I think this patch series should be divided into 2 parts,
one for DMA in general and one for DMA supporting QSPI.

How do you think about it ?

Best regards,
KHIEM Nguyen

On 6/2/2014 10:42 PM, Geert Uytterhoeven wrote:
> This patch series enables DMA support for QSPI on r8a7791/koelsch
> reference.  It's independent from the series "ARM: shmobile: koelsch
> legacy: Enable DMA for QSPI", but it depends on the SHDMA work for r8a7790
> by Ben Dooks (cfr. "[PATCH v2 0/9] Updates Renesas OF-DMA code").
>
> Changes Compared to previous submission ("[PATCH/RFC 0/7] ARM: shmobile:
> r8a7791: Add preliminary DMA support"):
>    - "[6/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF" was dropped,
>    - 2/7 was added,
>    - 7/7 was changed (see changelog in individual patch).
>
> This was tested on r8a7791/koelsch.
>
> Performance figures for reading from a QSPI FLASH driven at 24.375 MHz are:
>    - Single:  1.1 Mbps PIO, 23 Mbps DMA
>    - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
>    - Quad  : 13   Mbps PIO, 70 Mbps DMA
>
> Thanks for your comments!
>
>    [1/7] DMA: shdma: Add r8a7791 support
>    [2/7] DMA: shdma: Spelling s/controll/control/
>    [3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks
>    [4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings
>    [5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes
>    [6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1
>    [7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
>
>   Documentation/devicetree/bindings/dma/shdma.txt |   7 +-
>   arch/arm/boot/dts/r8a7791-koelsch.dts           |   8 ++
>   arch/arm/boot/dts/r8a7791.dtsi                  |  79 ++++++++++++++++-
>   drivers/dma/sh/shdmac.c                         |   1 +
>   include/dt-bindings/dma/r8a7791-dma.h           | 111 ++++++++++++++++++++++++
>   5 files changed, 201 insertions(+), 5 deletions(-)
>   create mode 100644 include/dt-bindings/dma/r8a7791-dma.h
>
> Gr{oetje,eeting}s,
>
> 						Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> 							    -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Simon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>,
	khiem.nguyen.xt@renesas.com,
	Ben Dooks <ben.dooks@codethink.co.uk>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-sh@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, dmaengine@vger.kernel.org
Subject: Re: [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI
Date: Tue, 03 Jun 2014 13:36:33 +0900	[thread overview]
Message-ID: <538D50D1.7010900@renesas.com> (raw)
In-Reply-To: <1401716531-29794-1-git-send-email-geert+renesas@glider.be>

Hi Geert,

Thanks for the patches.

I think this patch series should be divided into 2 parts,
one for DMA in general and one for DMA supporting QSPI.

How do you think about it ?

Best regards,
KHIEM Nguyen

On 6/2/2014 10:42 PM, Geert Uytterhoeven wrote:
> This patch series enables DMA support for QSPI on r8a7791/koelsch
> reference.  It's independent from the series "ARM: shmobile: koelsch
> legacy: Enable DMA for QSPI", but it depends on the SHDMA work for r8a7790
> by Ben Dooks (cfr. "[PATCH v2 0/9] Updates Renesas OF-DMA code").
>
> Changes Compared to previous submission ("[PATCH/RFC 0/7] ARM: shmobile:
> r8a7791: Add preliminary DMA support"):
>    - "[6/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for MSIOF" was dropped,
>    - 2/7 was added,
>    - 7/7 was changed (see changelog in individual patch).
>
> This was tested on r8a7791/koelsch.
>
> Performance figures for reading from a QSPI FLASH driven at 24.375 MHz are:
>    - Single:  1.1 Mbps PIO, 23 Mbps DMA
>    - Dual  : 12.7 Mbps PIO, 48 Mbps DMA
>    - Quad  : 13   Mbps PIO, 70 Mbps DMA
>
> Thanks for your comments!
>
>    [1/7] DMA: shdma: Add r8a7791 support
>    [2/7] DMA: shdma: Spelling s/controll/control/
>    [3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks
>    [4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings
>    [5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes
>    [6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1
>    [7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI
>
>   Documentation/devicetree/bindings/dma/shdma.txt |   7 +-
>   arch/arm/boot/dts/r8a7791-koelsch.dts           |   8 ++
>   arch/arm/boot/dts/r8a7791.dtsi                  |  79 ++++++++++++++++-
>   drivers/dma/sh/shdmac.c                         |   1 +
>   include/dt-bindings/dma/r8a7791-dma.h           | 111 ++++++++++++++++++++++++
>   5 files changed, 201 insertions(+), 5 deletions(-)
>   create mode 100644 include/dt-bindings/dma/r8a7791-dma.h
>
> Gr{oetje,eeting}s,
>
> 						Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> 							    -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


  parent reply	other threads:[~2014-06-03  4:36 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-02 13:42 [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI Geert Uytterhoeven
2014-06-02 13:42 ` Geert Uytterhoeven
2014-06-02 13:42 ` Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 1/7] DMA: shdma: Add r8a7791 support Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-04 11:29   ` Laurent Pinchart
2014-06-04 11:29     ` Laurent Pinchart
2014-06-04 11:29     ` Laurent Pinchart
2014-06-04 11:39     ` Geert Uytterhoeven
2014-06-04 11:39       ` Geert Uytterhoeven
2014-06-04 11:39       ` Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 2/7] DMA: shdma: Spelling s/controll/control/ Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:50   ` Ben Dooks
2014-06-02 13:50     ` Ben Dooks
2014-06-02 13:50     ` Ben Dooks
2014-06-04 11:25   ` Laurent Pinchart
2014-06-04 11:25     ` Laurent Pinchart
2014-06-04 11:25     ` Laurent Pinchart
2014-06-02 13:42 ` [PATCH v2 3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-04 11:24   ` Laurent Pinchart
2014-06-04 11:24     ` Laurent Pinchart
2014-06-04 11:24     ` Laurent Pinchart
2014-06-04 23:29     ` Simon Horman
2014-06-04 23:29       ` Simon Horman
2014-06-04 23:29       ` Simon Horman
2014-06-02 13:42 ` [PATCH v2 4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:52   ` Ben Dooks
2014-06-02 13:52     ` Ben Dooks
2014-06-02 13:52     ` Ben Dooks
2014-06-03  7:53     ` Geert Uytterhoeven
2014-06-03  7:53       ` Geert Uytterhoeven
2014-06-03  7:53       ` Geert Uytterhoeven
2014-06-04 11:30       ` Laurent Pinchart
2014-06-04 11:30         ` Laurent Pinchart
2014-06-04 11:30         ` Laurent Pinchart
2014-06-04 11:45         ` Ben Dooks
2014-06-04 11:45           ` Ben Dooks
2014-06-04 11:45           ` Ben Dooks
2014-06-04 11:53           ` Laurent Pinchart
2014-06-04 11:53             ` Laurent Pinchart
2014-06-04 11:53             ` Laurent Pinchart
2014-06-11 11:05   ` [PATCH v2 4/7] ARM: shmobile: r8a7791: Add PCIEC clock device tree node Phil Edworthy
2014-06-12 15:34   ` Laurent Pinchart
2014-06-02 13:42 ` [PATCH v2 5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-04 12:25   ` Laurent Pinchart
2014-06-04 12:25     ` Laurent Pinchart
2014-06-04 12:25     ` Laurent Pinchart
2014-06-05  0:17     ` Kuninori Morimoto
2014-06-05  0:17       ` Kuninori Morimoto
2014-06-05  0:17       ` Kuninori Morimoto
2014-06-05 12:37       ` Laurent Pinchart
2014-06-05 12:37         ` Laurent Pinchart
2014-06-05 12:37         ` Laurent Pinchart
2014-06-06 11:22     ` Ben Dooks
2014-06-06 11:22       ` Ben Dooks
2014-06-06 11:22       ` Ben Dooks
2014-06-02 13:42 ` [PATCH v2 6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1 Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:42   ` Geert Uytterhoeven
2014-06-02 13:53   ` Ben Dooks
2014-06-02 13:53     ` Ben Dooks
2014-06-02 13:53     ` Ben Dooks
2014-06-02 13:58 ` [PATCH v2 0/7] ARM: shmobile: koelsch reference: " Ben Dooks
2014-06-02 13:58   ` Ben Dooks
2014-06-02 13:58   ` Ben Dooks
2014-06-03  4:36 ` Khiem Nguyen [this message]
2014-06-03  4:36   ` Khiem Nguyen
2014-06-03  4:36   ` Khiem Nguyen
2014-06-03  7:05   ` Geert Uytterhoeven
2014-06-03  7:05     ` Geert Uytterhoeven
2014-06-03  7:05     ` Geert Uytterhoeven
2014-06-03 23:29     ` Simon Horman
2014-06-03 23:29       ` Simon Horman
2014-06-03 23:29       ` Simon Horman
2014-06-04  0:18       ` Khiem Nguyen
2014-06-04  0:18         ` Khiem Nguyen
2014-06-04  0:18         ` Khiem Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=538D50D1.7010900@renesas.com \
    --to=khiem.nguyen.xt@renesas.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.