[PATCH] dt/documentation: add specification of dma bus information

[santosh.shilimkar@ti.com (Santosh Shilimkar)]

On Friday 20 June 2014 11:50 AM, Rob Herring wrote:
> On Fri, Jun 20, 2014 at 10:04 AM, Santosh Shilimkar
> <santosh.shilimkar@ti.com> wrote:
>> On Monday 09 June 2014 09:59 AM, Santosh Shilimkar wrote:
>>> On Sunday 08 June 2014 10:13 PM, Fabio Estevam wrote:
>>>> On Thu, Jun 5, 2014 at 12:22 PM, Santosh Shilimkar
>>>> <santosh.shilimkar@ti.com> wrote:
>>>>> Recently we introduced the generic device tree infrastructure for couple of DMA
>>>>> bus parameter, dma-ranges and dma-coherent. Update the documentation so that
>>>>> its useful for future users.
>>>>>
>>>>> The "dma-ranges" property is intended to be used for describing the
>>>>> configuration of DMA bus RAM addresses and its offset w.r.t CPU addresses.
>>>>>
>>>>> The "dma-coherent" property is intended to be used for identifying devices
>>>>> supported coherent DMA operations.
>>>>>
>>>>> Cc: Arnd Bergmann <arnd@arndb.de>
>>>>> Cc: Grant Likely <grant.likely@linaro.org>
>>>>> Cc: Rob Herring <robh+dt@kernel.org>
>>>>> Cc: Pawel Moll <pawel.moll@arm.com>
>>>>> Cc: Mark Rutland <mark.rutland@arm.com>
>>>>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>>>>> Cc: Shawn Guo <shawn.guo@freescale.com>
>>>>> Cc: Kumar Gala <galak@codeaurora.org>
>>>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>>>>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>>>> ---
>>>>>  Documentation/devicetree/booting-without-of.txt |   60 +++++++++++++++++++++++
>>>>>  1 file changed, 60 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
>>>>> index 1f013bd..f0120c1 100644
>>>>> --- a/Documentation/devicetree/booting-without-of.txt
>>>>> +++ b/Documentation/devicetree/booting-without-of.txt
>>>>> @@ -51,6 +51,8 @@ Table of Contents
>>>>>
>>>>>    VIII - Specifying device power management information (sleep property)
>>>>>
>>>>> +  VIV - Specifying dma bus information
>>>>
>>>> "9" in Roman numeral is "IX"
>>>>
>>> Yeah.. Not sure what I was thinking...
>>>
>> Updated patch end of the email with the typo fixed.
>>
>> Rob,
>> Can you please pick this up if you are ok with the it.
>>
>> Regards,
>> Santosh
>>
>> From b72e949a194d766fe029fe6bb5939467f2fbe9b9 Mon Sep 17 00:00:00 2001
>> From: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> Date: Fri, 20 Jun 2014 11:01:54 -0400
>> Subject: [PATCH] dt/documentation: add specification of dma bus information
>>
>> Recently we introduced the generic device tree infrastructure for couple of DMA
>> bus parameter, dma-ranges and dma-coherent. Update the documentation so that
>> its useful for future users.
>>
>> The "dma-ranges" property is intended to be used for describing the
>> configuration of DMA bus RAM addresses and its offset w.r.t CPU addresses.
>>
>> The "dma-coherent" property is intended to be used for identifying devices
>> supported coherent DMA operations.
>>
>> Cc: Arnd Bergmann <arnd@arndb.de>
>> Cc: Grant Likely <grant.likely@linaro.org>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Pawel Moll <pawel.moll@arm.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>> Cc: Kumar Gala <galak@codeaurora.org>
>> Acked-by: Shawn Guo <shawn.guo@freescale.com>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>> ---
>>  Documentation/devicetree/booting-without-of.txt |   60 +++++++++++++++++++++++
>>  1 file changed, 60 insertions(+)
>>
>> diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
>> index 1f013bd..0b0928c 100644
>> --- a/Documentation/devicetree/booting-without-of.txt
>> +++ b/Documentation/devicetree/booting-without-of.txt
>> @@ -51,6 +51,8 @@ Table of Contents
>>
>>    VIII - Specifying device power management information (sleep property)
>>
>> +  IX - Specifying dma bus information
>> +
>>    Appendix A - Sample SOC node for MPC8540
>>
>>
>> @@ -1332,6 +1334,64 @@ reasonably grouped in this manner, then create a virtual sleep controller
>>  (similar to an interrupt nexus, except that defining a standardized
>>  sleep-map should wait until its necessity is demonstrated).
>>
>> +IX - Specifying dma bus information
>> +
>> +Some devices may have DMA memory range shifted relatively to the beginning of
>> +RAM, or even placed outside of kernel RAM. For example, the Keystone 2 SoC
>> +worked in LPAE mode with 4G memory has:
>> +- RAM range: [0x8 0000 0000, 0x8 FFFF FFFF]
>> +- DMA range: [  0x8000 0000,   0xFFFF FFFF]
>> +and DMA range is aliased into first 2G of RAM in HW.
>> +
>> +In such cases, DMA addresses translation should be performed between CPU phys
>> +and DMA addresses. The "dma-ranges" property is intended to be used
>> +for describing the configuration of such system in DT.
>> +
>> +In addition, each DMA master device on the DMA bus may or may not support
>> +coherent DMA operations. The "dma-coherent" property is intended to be used
>> +for identifying devices supported coherent DMA operations in DT.
>> +
>> +* DMA Bus master
>> +Optional property:
>> +- dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of
>> +       (child-bus-address, parent-bus-address, length). Each triplet specified
>> +       describes a contiguous DMA address range.
>> +       The dma-ranges property is used to describe the direct memory access (DMA)
>> +       structure of a memory-mapped bus whose device tree parent can be accessed
>> +       from DMA operations originating from the bus. It provides a means of
>> +       defining a mapping or translation between the physical address space of
>> +       the bus and the physical address space of the parent of the bus.
>> +       (for more information see ePAPR specification)
>> +
>> +* DMA Bus child
>> +Optional property:
>> +- dma-ranges: <empty> value. if present - It means that DMA addresses
>> +       translation has to be enabled for this device.
>> +- dma-coherent: Present if dma operations are coherent
>> +
>> +Example:
>> +soc {
>> +               compatible = "ti,keystone","simple-bus";
>> +               ranges = <0x0 0x0 0x0 0xc0000000>;
>> +               dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
>> +
>> +               [...]
>> +
>> +               usb: usb at 2680000 {
>> +                       compatible = "ti,keystone-dwc3";
>> +
>> +                       [...]
>> +
>> +                       dma-coherent;
>> +                       dma-ranges;
>> +
>> +                       dwc3 at 2690000 {
>> +                               compatible = "synopsys,dwc3";
>> +                               [...]
>> +                       };
> 
> This example is a bit strange. I don't understand the relationship
> between keystone-dwc3 and synopsys,dwc3, nor do I want to. I'd prefer
> to see a simple example here.
> 
OK. Will do.

> dma-ranges is a property of the parent which you show, but
> dma-coherent originally was a property of the bus master itself. While
> we need to support that, are we changing that? We need to be clear on
> where the property belongs even if the kernel is more lax.
> 
I don't think we are changing it fundamentally but may be I missing
your point. The dma-coherent as is now a per-device property.
USB is one of the bus master supports coherency and hence showed
up in above example.

Regards,
Santosh