[PATCH v2 2/2] phy: add hix5hd2-sata-phy driver

[kishon@ti.com (Kishon Vijay Abraham I)]

Hi,

On Wednesday 02 July 2014 04:55 PM, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Wednesday 25 June 2014 02:44 PM, Zhangfei Gao wrote:
>> From: Jiancheng Xue <xuejiancheng@huawei.com>
>>
>> Add hix5hd2-sata-phy driver on Hisilicon hix5hd2 soc.
>>
>> Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>> ---
>>  drivers/phy/Kconfig            |    8 ++
>>  drivers/phy/Makefile           |    1 +
>>  drivers/phy/phy-hix5hd2-sata.c |  192 ++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 201 insertions(+)
>>  create mode 100644 drivers/phy/phy-hix5hd2-sata.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 16a2f06..782953d 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -109,6 +109,14 @@ config PHY_EXYNOS5250_SATA
>>  	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
>>  	  port to accept one SATA device.
>>  
>> +config PHY_HIX5HD2_SATA
>> +	tristate "HIX5HD2 SATA PHY Driver"
>> +	depends on ARCH_HIX5HD2 && OF
> 
> depends on HAS_IOMEM?
>> +	select GENERIC_PHY
>> +	select MFD_SYSCON
>> +	help
>> +	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
>> +
>>  config PHY_SUN4I_USB
>>  	tristate "Allwinner sunxi SoC USB PHY driver"
>>  	depends on ARCH_SUNXI && HAS_IOMEM && OF
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index b4f1d57..54f04d0 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
>>  obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
>>  obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
>>  obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
>> +obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
>>  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
>>  obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
>>  phy-exynos-usb2-y			+= phy-samsung-usb2.o
>> diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c
>> new file mode 100644
>> index 0000000..6f1e3ea
>> --- /dev/null
>> +++ b/drivers/phy/phy-hix5hd2-sata.c
>> @@ -0,0 +1,192 @@
>> +/*
>> + * Copyright (c) 2014 Linaro Ltd.
>> + * Copyright (c) 2014 Hisilicon Limited.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
> 
> can this be arranged alphabetically? Helps while adding new header files.
>> +
>> +#define SATA_PHY0_CTLL		0xa0
>> +#define MPLL_MULTIPLIER_SHIFT	1
>> +#define MPLL_MULTIPLIER_MASK	0xfe
>> +#define MPLL_MULTIPLIER_50M	0x3c
>> +#define MPLL_MULTIPLIER_100M	0x1e
>> +#define PHY_RESET		BIT(0)
>> +#define REF_SSP_EN		BIT(9)
>> +#define SSC_EN			BIT(10)
>> +#define REF_USE_PAD		BIT(23)
>> +
>> +#define SATA_PORT_PHYCTL	0x174
>> +#define SPEED_MODE_MASK		0x6f0000
>> +#define HALF_RATE_SHIFT		16
>> +#define PHY_CONFIG_SHIFT	18
>> +#define GEN2_EN_SHIFT		21
>> +#define SPEED_CTRL		BIT(20)
>> +
>> +#define SATA_PORT_PHYCTL1	0x148
>> +#define AMPLITUDE_MASK		0x3ffffe
>> +#define AMPLITUDE_GEN3		0x68
>> +#define AMPLITUDE_GEN3_SHIFT	15
>> +#define AMPLITUDE_GEN2		0x56
>> +#define AMPLITUDE_GEN2_SHIFT	8
>> +#define AMPLITUDE_GEN1		0x56
>> +#define AMPLITUDE_GEN1_SHIFT	1
>> +
> .
> .
> <snip>
> .
> .
>> +
>> +static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
>> +{
>> +	struct phy_provider *phy_provider;
>> +	struct device *dev = &pdev->dev;
>> +	struct resource *res;
>> +	struct phy *phy;
>> +	struct hix5hd2_priv *priv;
>> +
>> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	priv->base = devm_ioremap(dev, res->start, resource_size(res));

It should be devm_ioremap_resource().

-Kishon
>> +	if (!priv->base)
>> +		return -ENOMEM;
>> +
>> +	priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
>> +						"hisilicon,peripheral-syscon");
>> +	if (IS_ERR(priv->peri_ctrl))
>> +		priv->peri_ctrl = NULL;
> 
> if syscon_regmap_lookup_by_phandle returns EPROBE_DEFER, you have to return
> EPROBE_DEFER no?
> 
> Rest looks fine to me.
> 
> Thanks
> Kishon
>