All of lore.kernel.org
 help / color / mirror / Atom feed
From: Qais Yousef <qais.yousef@imgtec.com>
To: Andrew Bresticker <abrestic@chromium.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>,
	Markos Chandras <markos.chandras@imgtec.com>,
	Paul Burton <paul.burton@imgtec.com>,
	"Jonas Gorski" <jogo@openwrt.org>,
	John Crispin <blogic@openwrt.org>,
	David Daney <ddaney.cavm@gmail.com>, <linux-mips@linux-mips.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 14/24] irqchip: mips-gic: Implement generic irq_ack/irq_eoi callbacks
Date: Wed, 17 Sep 2014 10:14:50 +0100	[thread overview]
Message-ID: <5419510A.3000300@imgtec.com> (raw)
In-Reply-To: <1410825087-5497-15-git-send-email-abrestic@chromium.org>

Hi Andrew,

On 09/16/2014 12:51 AM, Andrew Bresticker wrote:
> There's no need for platforms to have their own GIC irq_ack/irq_eoi
> callbacks.  Move them to the GIC irqchip driver.
>
> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
> ---
>   arch/mips/include/asm/gic.h     |  2 --
>   arch/mips/mti-malta/malta-int.c | 16 ----------------
>   arch/mips/mti-sead3/sead3-int.c | 21 ---------------------
>   drivers/irqchip/irq-mips-gic.c  | 15 ++++++++++++---
>   4 files changed, 12 insertions(+), 42 deletions(-)
>
> diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
> index 022d831..1bf7985 100644
> --- a/arch/mips/include/asm/gic.h
> +++ b/arch/mips/include/asm/gic.h
> @@ -376,7 +376,5 @@ extern void gic_bind_eic_interrupt(int irq, int set);
>   extern unsigned int gic_get_timer_pending(void);
>   extern void gic_get_int_mask(unsigned long *dst, const unsigned long *src);
>   extern unsigned int gic_get_int(void);
> -extern void gic_irq_ack(struct irq_data *d);
> -extern void gic_finish_irq(struct irq_data *d);
>   extern void gic_platform_init(int irqs, struct irq_chip *irq_controller);
>   #endif /* _ASM_GICREGS_H */
> diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
> index 5c31208..b60adfd 100644
> --- a/arch/mips/mti-malta/malta-int.c
> +++ b/arch/mips/mti-malta/malta-int.c
> @@ -715,22 +715,6 @@ int malta_be_handler(struct pt_regs *regs, int is_fixup)
>   	return retval;
>   }
>   
> -void gic_irq_ack(struct irq_data *d)
> -{
> -	int irq = (d->irq - gic_irq_base);
> -
> -	GIC_CLR_INTR_MASK(irq);
> -
> -	if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
> -		GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
> -}
> -
> -void gic_finish_irq(struct irq_data *d)
> -{
> -	/* Enable interrupts. */
> -	GIC_SET_INTR_MASK(d->irq - gic_irq_base);
> -}
> -
>   void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
>   {
>   	int i;
> diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
> index 9d5b5bd..03f9865 100644
> --- a/arch/mips/mti-sead3/sead3-int.c
> +++ b/arch/mips/mti-sead3/sead3-int.c
> @@ -85,27 +85,6 @@ void __init arch_init_irq(void)
>   			ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
>   }
>   
> -void gic_irq_ack(struct irq_data *d)
> -{
> -	GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
> -}
> -
> -void gic_finish_irq(struct irq_data *d)
> -{
> -	unsigned int irq = (d->irq - gic_irq_base);
> -	unsigned int i, irq_source;
> -
> -	/* Clear edge detectors. */
> -	for (i = 0; i < gic_shared_intr_map[irq].num_shared_intr; i++) {
> -		irq_source = gic_shared_intr_map[irq].intr_list[i];
> -		if (gic_irq_flags[irq_source] & GIC_TRIG_EDGE)
> -			GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq_source);
> -	}
> -
> -	/* Enable interrupts. */
> -	GIC_SET_INTR_MASK(irq);
> -}
> -
>   void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
>   {
>   	int i;
> diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
> index 9e9d8b9..0dc2972 100644
> --- a/drivers/irqchip/irq-mips-gic.c
> +++ b/drivers/irqchip/irq-mips-gic.c
> @@ -237,6 +237,15 @@ static void gic_unmask_irq(struct irq_data *d)
>   	GIC_SET_INTR_MASK(d->irq - gic_irq_base);
>   }
>   
> +static void gic_ack_irq(struct irq_data *d)
> +{
> +	GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
> +
> +	/* Clear edge detector */
> +	if (gic_irq_flags[d->irq - gic_irq_base] & GIC_TRIG_EDGE)
> +		GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), d->irq - gic_irq_base);
> +}
> +
>   #ifdef CONFIG_SMP
>   static DEFINE_SPINLOCK(gic_lock);
>   
> @@ -272,11 +281,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
>   
>   static struct irq_chip gic_irq_controller = {
>   	.name			=	"MIPS GIC",
> -	.irq_ack		=	gic_irq_ack,
> +	.irq_ack		=	gic_ack_irq,
>   	.irq_mask		=	gic_mask_irq,
> -	.irq_mask_ack		=	gic_mask_irq,
> +	.irq_mask_ack		=	gic_ack_irq,
>   	.irq_unmask		=	gic_unmask_irq,
> -	.irq_eoi		=	gic_finish_irq,
> +	.irq_eoi		=	gic_unmask_irq,
>   #ifdef CONFIG_SMP
>   	.irq_set_affinity	=	gic_set_affinity,
>   #endif

I'm no expert in irq_chip api but I think providing irq_mask_ack and 
irq_eoi makes no sense to GIC and can be removed.

Qais

WARNING: multiple messages have this Message-ID (diff)
From: Qais Yousef <qais.yousef@imgtec.com>
To: Andrew Bresticker <abrestic@chromium.org>,
	Ralf Baechle <ralf@linux-mips.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Jason Cooper <jason@lakedaemon.net>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>,
	Markos Chandras <markos.chandras@imgtec.com>,
	Paul Burton <paul.burton@imgtec.com>,
	Jonas Gorski <jogo@openwrt.org>,
	John Crispin <blogic@openwrt.org>,
	David Daney <ddaney.cavm@gmail.com>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 14/24] irqchip: mips-gic: Implement generic irq_ack/irq_eoi callbacks
Date: Wed, 17 Sep 2014 10:14:50 +0100	[thread overview]
Message-ID: <5419510A.3000300@imgtec.com> (raw)
Message-ID: <20140917091450.1POHZ5hbNOa9oEXcl0FzR8XCb-biOStVxVleGBG7UxA@z> (raw)
In-Reply-To: <1410825087-5497-15-git-send-email-abrestic@chromium.org>

Hi Andrew,

On 09/16/2014 12:51 AM, Andrew Bresticker wrote:
> There's no need for platforms to have their own GIC irq_ack/irq_eoi
> callbacks.  Move them to the GIC irqchip driver.
>
> Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
> ---
>   arch/mips/include/asm/gic.h     |  2 --
>   arch/mips/mti-malta/malta-int.c | 16 ----------------
>   arch/mips/mti-sead3/sead3-int.c | 21 ---------------------
>   drivers/irqchip/irq-mips-gic.c  | 15 ++++++++++++---
>   4 files changed, 12 insertions(+), 42 deletions(-)
>
> diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
> index 022d831..1bf7985 100644
> --- a/arch/mips/include/asm/gic.h
> +++ b/arch/mips/include/asm/gic.h
> @@ -376,7 +376,5 @@ extern void gic_bind_eic_interrupt(int irq, int set);
>   extern unsigned int gic_get_timer_pending(void);
>   extern void gic_get_int_mask(unsigned long *dst, const unsigned long *src);
>   extern unsigned int gic_get_int(void);
> -extern void gic_irq_ack(struct irq_data *d);
> -extern void gic_finish_irq(struct irq_data *d);
>   extern void gic_platform_init(int irqs, struct irq_chip *irq_controller);
>   #endif /* _ASM_GICREGS_H */
> diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
> index 5c31208..b60adfd 100644
> --- a/arch/mips/mti-malta/malta-int.c
> +++ b/arch/mips/mti-malta/malta-int.c
> @@ -715,22 +715,6 @@ int malta_be_handler(struct pt_regs *regs, int is_fixup)
>   	return retval;
>   }
>   
> -void gic_irq_ack(struct irq_data *d)
> -{
> -	int irq = (d->irq - gic_irq_base);
> -
> -	GIC_CLR_INTR_MASK(irq);
> -
> -	if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
> -		GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
> -}
> -
> -void gic_finish_irq(struct irq_data *d)
> -{
> -	/* Enable interrupts. */
> -	GIC_SET_INTR_MASK(d->irq - gic_irq_base);
> -}
> -
>   void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
>   {
>   	int i;
> diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
> index 9d5b5bd..03f9865 100644
> --- a/arch/mips/mti-sead3/sead3-int.c
> +++ b/arch/mips/mti-sead3/sead3-int.c
> @@ -85,27 +85,6 @@ void __init arch_init_irq(void)
>   			ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
>   }
>   
> -void gic_irq_ack(struct irq_data *d)
> -{
> -	GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
> -}
> -
> -void gic_finish_irq(struct irq_data *d)
> -{
> -	unsigned int irq = (d->irq - gic_irq_base);
> -	unsigned int i, irq_source;
> -
> -	/* Clear edge detectors. */
> -	for (i = 0; i < gic_shared_intr_map[irq].num_shared_intr; i++) {
> -		irq_source = gic_shared_intr_map[irq].intr_list[i];
> -		if (gic_irq_flags[irq_source] & GIC_TRIG_EDGE)
> -			GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq_source);
> -	}
> -
> -	/* Enable interrupts. */
> -	GIC_SET_INTR_MASK(irq);
> -}
> -
>   void __init gic_platform_init(int irqs, struct irq_chip *irq_controller)
>   {
>   	int i;
> diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
> index 9e9d8b9..0dc2972 100644
> --- a/drivers/irqchip/irq-mips-gic.c
> +++ b/drivers/irqchip/irq-mips-gic.c
> @@ -237,6 +237,15 @@ static void gic_unmask_irq(struct irq_data *d)
>   	GIC_SET_INTR_MASK(d->irq - gic_irq_base);
>   }
>   
> +static void gic_ack_irq(struct irq_data *d)
> +{
> +	GIC_CLR_INTR_MASK(d->irq - gic_irq_base);
> +
> +	/* Clear edge detector */
> +	if (gic_irq_flags[d->irq - gic_irq_base] & GIC_TRIG_EDGE)
> +		GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), d->irq - gic_irq_base);
> +}
> +
>   #ifdef CONFIG_SMP
>   static DEFINE_SPINLOCK(gic_lock);
>   
> @@ -272,11 +281,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
>   
>   static struct irq_chip gic_irq_controller = {
>   	.name			=	"MIPS GIC",
> -	.irq_ack		=	gic_irq_ack,
> +	.irq_ack		=	gic_ack_irq,
>   	.irq_mask		=	gic_mask_irq,
> -	.irq_mask_ack		=	gic_mask_irq,
> +	.irq_mask_ack		=	gic_ack_irq,
>   	.irq_unmask		=	gic_unmask_irq,
> -	.irq_eoi		=	gic_finish_irq,
> +	.irq_eoi		=	gic_unmask_irq,
>   #ifdef CONFIG_SMP
>   	.irq_set_affinity	=	gic_set_affinity,
>   #endif

I'm no expert in irq_chip api but I think providing irq_mask_ack and 
irq_eoi makes no sense to GIC and can be removed.

Qais

  reply	other threads:[~2014-09-17  9:15 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-15 23:51 [PATCH 00/24] MIPS GIC cleanup, part 1 Andrew Bresticker
2014-09-15 23:51 ` [PATCH 01/24] MIPS: Always use IRQ domains for CPU IRQs Andrew Bresticker
2014-09-15 23:51 ` [PATCH 02/24] MIPS: Rename mips_cpu_intc_init() -> mips_cpu_irq_of_init() Andrew Bresticker
2014-09-15 23:51 ` [PATCH 03/24] MIPS: Provide a generic plat_irq_dispatch Andrew Bresticker
2014-09-17  8:56   ` Qais Yousef
2014-09-17  8:56     ` Qais Yousef
2014-09-17 16:36     ` Andrew Bresticker
2014-09-15 23:51 ` [PATCH 04/24] MIPS: Set vint handler when mapping CPU interrupts Andrew Bresticker
2014-09-15 23:51 ` [PATCH 05/24] MIPS: i8259: Use IRQ domains Andrew Bresticker
2014-09-15 23:51 ` [PATCH 06/24] MIPS: Add hook to get C0 performance counter interrupt Andrew Bresticker
2014-09-15 23:51 ` [PATCH 07/24] MIPS: smp-cps: Enable all hardware interrupts on secondary CPUs Andrew Bresticker
2014-09-15 23:51 ` [PATCH 08/24] MIPS: Remove gic_{enable,disable}_interrupt() Andrew Bresticker
2014-09-15 23:51 ` [PATCH 09/24] MIPS: sead3: Remove sead3-serial.c Andrew Bresticker
2014-09-15 23:51 ` [PATCH 10/24] MIPS: sead3: Do not overlap CPU/GIC IRQ ranges Andrew Bresticker
2014-09-15 23:51 ` [PATCH 11/24] MIPS: Malta: Move MSC01 interrupt base Andrew Bresticker
2014-09-15 23:51 ` [PATCH 12/24] MIPS: Move MIPS_GIC_IRQ_BASE into platform irq.h Andrew Bresticker
2014-09-15 23:51 ` [PATCH 13/24] MIPS: Move GIC to drivers/irqchip/ Andrew Bresticker
2014-09-15 23:51 ` [PATCH 14/24] irqchip: mips-gic: Implement generic irq_ack/irq_eoi callbacks Andrew Bresticker
2014-09-17  9:14   ` Qais Yousef [this message]
2014-09-17  9:14     ` Qais Yousef
2014-09-17 17:14     ` Andrew Bresticker
2014-09-15 23:51 ` [PATCH 15/24] irqchip: mips-gic: Implement irq_set_type callback Andrew Bresticker
2014-09-15 23:51 ` [PATCH 16/24] irqchip: mips-gic: Fix gic_set_affinity() return value Andrew Bresticker
2014-09-15 23:51 ` [PATCH 17/24] irqchip: mips-gic: Use IRQ domains Andrew Bresticker
2014-09-15 23:51 ` [PATCH 18/24] irqchip: mips-gic: Stop using per-platform mapping tables Andrew Bresticker
2014-09-17  9:21   ` Qais Yousef
2014-09-17  9:21     ` Qais Yousef
2014-09-15 23:51 ` [PATCH 19/24] irqchip: mips-gic: Probe for number of external interrupts Andrew Bresticker
2014-09-15 23:51 ` [PATCH 20/24] irqchip: mips-gic: Use separate edge/level irq_chips Andrew Bresticker
2014-09-17  9:24   ` Qais Yousef
2014-09-17  9:24     ` Qais Yousef
2014-09-17 17:15     ` Andrew Bresticker
2014-09-15 23:51 ` [PATCH 21/24] irqchip: mips-gic: Support local interrupts Andrew Bresticker
2014-09-17  9:50   ` Qais Yousef
2014-09-17  9:50     ` Qais Yousef
2014-09-17 17:40     ` Andrew Bresticker
2014-09-17 21:09       ` Andrew Bresticker
2014-09-18  6:57       ` Qais Yousef
2014-09-15 23:51 ` [PATCH 22/24] irqchip: mips-gic: Remove unnecessary globals Andrew Bresticker
2014-09-15 23:51 ` [PATCH 23/24] MIPS: Malta: Use generic plat_irq_dispatch Andrew Bresticker
2014-09-15 23:51 ` [PATCH 24/24] MIPS: sead3: " Andrew Bresticker
2014-09-17 10:20 ` [PATCH 00/24] MIPS GIC cleanup, part 1 Qais Yousef
2014-09-17 10:20   ` Qais Yousef
2014-09-17 17:42   ` Andrew Bresticker
2014-09-18  7:08     ` Qais Yousef
2014-09-17 14:07 ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5419510A.3000300@imgtec.com \
    --to=qais.yousef@imgtec.com \
    --cc=abrestic@chromium.org \
    --cc=blogic@openwrt.org \
    --cc=ddaney.cavm@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=jeffrey.deans@imgtec.com \
    --cc=jogo@openwrt.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=markos.chandras@imgtec.com \
    --cc=paul.burton@imgtec.com \
    --cc=ralf@linux-mips.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.