From: Chanwoo Choi <cw00.choi@samsung.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Daniel Drake <drake@endlessm.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
Date: Mon, 22 Sep 2014 15:41:43 +0900 [thread overview]
Message-ID: <541FC4A7.3010901@samsung.com> (raw)
In-Reply-To: <1410954633-27025-2-git-send-email-javier.martinez@collabora.co.uk>
Dear Javier,
On 09/17/2014 08:50 PM, Javier Martinez Canillas wrote:
> commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
> added an "rtc_src" DT property for the Samsung's S3C Real Time Clock
> controller that specifies the 32.768 kHz clock that uses the RTC as its
> source clock. In the case of the Peach Pit and Pi machines, the Maxim
> 77802 32kHz AP clock is used as the source clock.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++-
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 9a23382..bfd189e 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -12,6 +12,7 @@
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77802.h>
> #include "exynos5420.dtsi"
>
> / {
> @@ -151,7 +152,7 @@
> status = "okay";
> clock-frequency = <400000>;
>
> - max77802-pmic@9 {
> + max77802: max77802-pmic@9 {
> compatible = "maxim,max77802";
> interrupt-parent = <&gpx3>;
> interrupts = <1 IRQ_TYPE_NONE>;
> @@ -727,6 +728,8 @@
>
> &rtc {
> status = "okay";
> + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
> + clock-names = "rtc", "rtc_src";
> };
>
> &spi_2 {
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 1d31c81..84ec1ce 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -12,6 +12,7 @@
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77802.h>
> #include "exynos5800.dtsi"
>
> / {
> @@ -150,7 +151,7 @@
> status = "okay";
> clock-frequency = <400000>;
>
> - max77802-pmic@9 {
> + max77802: max77802-pmic@9 {
> compatible = "maxim,max77802";
> interrupt-parent = <&gpx3>;
> interrupts = <1 IRQ_TYPE_NONE>;
> @@ -715,6 +716,8 @@
>
> &rtc {
> status = "okay";
> + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
> + clock-names = "rtc", "rtc_src";
> };
>
> &spi_2 {
>
I'm so sorry for delay reply because I'm out of office for vacation (9/5 ~ 9/20).
Looks goot to me for this patch.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Thanks,
Chanwoo Choi
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
Date: Mon, 22 Sep 2014 15:41:43 +0900 [thread overview]
Message-ID: <541FC4A7.3010901@samsung.com> (raw)
In-Reply-To: <1410954633-27025-2-git-send-email-javier.martinez@collabora.co.uk>
Dear Javier,
On 09/17/2014 08:50 PM, Javier Martinez Canillas wrote:
> commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
> added an "rtc_src" DT property for the Samsung's S3C Real Time Clock
> controller that specifies the 32.768 kHz clock that uses the RTC as its
> source clock. In the case of the Peach Pit and Pi machines, the Maxim
> 77802 32kHz AP clock is used as the source clock.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++-
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++-
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index 9a23382..bfd189e 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -12,6 +12,7 @@
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77802.h>
> #include "exynos5420.dtsi"
>
> / {
> @@ -151,7 +152,7 @@
> status = "okay";
> clock-frequency = <400000>;
>
> - max77802-pmic at 9 {
> + max77802: max77802-pmic at 9 {
> compatible = "maxim,max77802";
> interrupt-parent = <&gpx3>;
> interrupts = <1 IRQ_TYPE_NONE>;
> @@ -727,6 +728,8 @@
>
> &rtc {
> status = "okay";
> + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
> + clock-names = "rtc", "rtc_src";
> };
>
> &spi_2 {
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 1d31c81..84ec1ce 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -12,6 +12,7 @@
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77802.h>
> #include "exynos5800.dtsi"
>
> / {
> @@ -150,7 +151,7 @@
> status = "okay";
> clock-frequency = <400000>;
>
> - max77802-pmic at 9 {
> + max77802: max77802-pmic at 9 {
> compatible = "maxim,max77802";
> interrupt-parent = <&gpx3>;
> interrupts = <1 IRQ_TYPE_NONE>;
> @@ -715,6 +716,8 @@
>
> &rtc {
> status = "okay";
> + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
> + clock-names = "rtc", "rtc_src";
> };
>
> &spi_2 {
>
I'm so sorry for delay reply because I'm out of office for vacation (9/5 ~ 9/20).
Looks goot to me for this patch.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Thanks,
Chanwoo Choi
next prev parent reply other threads:[~2014-09-22 6:41 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-17 11:50 [PATCH 0/2] s3c RTC fix for Exynos Chromebooks Javier Martinez Canillas
2014-09-17 11:50 ` Javier Martinez Canillas
2014-09-17 11:50 ` [PATCH 1/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards Javier Martinez Canillas
2014-09-17 11:50 ` Javier Martinez Canillas
2014-09-17 15:24 ` Doug Anderson
2014-09-17 15:24 ` Doug Anderson
2014-09-22 6:41 ` Chanwoo Choi [this message]
2014-09-22 6:41 ` Chanwoo Choi
2014-09-17 11:50 ` [PATCH 2/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow Javier Martinez Canillas
2014-09-17 11:50 ` Javier Martinez Canillas
2014-09-17 15:47 ` Doug Anderson
2014-09-17 15:47 ` Doug Anderson
2014-09-17 15:51 ` Andreas Färber
2014-09-17 15:51 ` Andreas Färber
2014-09-22 12:09 ` Kukjin Kim
2014-09-22 12:09 ` Kukjin Kim
2014-09-23 6:17 ` Kukjin Kim
2014-09-23 6:17 ` Kukjin Kim
2014-09-23 16:00 ` Kukjin Kim
2014-09-23 16:00 ` Kukjin Kim
2014-09-23 16:00 ` Kukjin Kim
2014-09-23 16:18 ` Javier Martinez Canillas
2014-09-23 16:18 ` Javier Martinez Canillas
2014-09-23 16:18 ` Javier Martinez Canillas
2014-09-24 21:41 ` Javier Martinez Canillas
2014-09-24 21:41 ` Javier Martinez Canillas
2014-09-24 23:27 ` Kukjin Kim
2014-09-24 23:27 ` Kukjin Kim
2014-09-25 7:18 ` Javier Martinez Canillas
2014-09-25 7:18 ` Javier Martinez Canillas
2014-09-18 6:48 ` Javier Martinez Canillas
2014-09-18 6:48 ` Javier Martinez Canillas
2014-09-18 6:48 ` Javier Martinez Canillas
2014-09-22 6:44 ` Chanwoo Choi
2014-09-22 6:44 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=541FC4A7.3010901@samsung.com \
--to=cw00.choi@samsung.com \
--cc=dianders@chromium.org \
--cc=drake@endlessm.com \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.