[PATCH] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate

[kever.yang@rock-chips.com (Kever Yang)]

Hi Jianqun,

     pls add linux-rockchip at lists.infradead.org next time.

On 09/30/2014 11:12 AM, Jianqun wrote:
> The relation of i2s nodes as follows:
>            i2s_src               0           0            594000000  0
>               i2s_frac           0           0            11289600   0
>                  i2s_pre         0           0            11289600   0
>                     sclk_i2s0    0           0            11289600   0
>                     i2s0_clkout  0           0            11289600   0
>                        hclk_i2s0 1           1            99000000   0
I always got the result as following when I set sclk_i2s0 to 11289600,
any one knows the reason?

       gpll                     6           6            594000000 0
           sclk_emmc             1           1            99000000 0
           i2s_src               0           0            11207548 0
              i2s_pre            0           0            11207548 0
                 sclk_i2s0       0           0            11207548 0
                 i2s0_clkout     0           0            11207548 0
              i2s_frac           0           0            646456897 0
> sclk_i2s0 is the master clock, when to set rate of sclk_i2s0, should
> allow to set its parent's rate, by add flag CLK_SET_RATE_PARENT for
> "i2s_frac", "i2s_pre", "i2s0_clkout" and "sclk_i2s0".
>
> Tested on rk3288 board using max98090, with command "aplay <music.wav>"
>
> Change-Id: I12faad082566532b65a7de8c0a6845e1c17870e6
> Signed-off-by: Jianqun <jay.xu@rock-chips.com>
> ---
>   drivers/clk/rockchip/clk-rk3288.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index c770de0..baf19b4 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -301,15 +301,15 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
>   	COMPOSITE(0, "i2s_src", mux_pll_src_cpll_gpll_p, 0,
>   			RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS,
>   			RK3288_CLKGATE_CON(4), 1, GFLAGS),
> -	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0,
> +	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
>   			RK3288_CLKSEL_CON(8), 0,
>   			RK3288_CLKGATE_CON(4), 2, GFLAGS),
> -	MUX(0, "i2s_pre", mux_i2s_pre_p, 0,
> +	MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
>   			RK3288_CLKSEL_CON(4), 8, 2, MFLAGS),
> -	COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0,
> +	COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, CLK_SET_RATE_PARENT,
>   			RK3288_CLKSEL_CON(4), 12, 1, MFLAGS,
>   			RK3288_CLKGATE_CON(4), 0, GFLAGS),
> -	GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0,
> +	GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT,
>   			RK3288_CLKGATE_CON(4), 3, GFLAGS),
>   
>   	MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,