From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate
Date: Thu, 16 Oct 2014 21:17:06 +0200 [thread overview]
Message-ID: <5441807.rM669MWZMA@phil> (raw)
In-Reply-To: <1413161056-10273-1-git-send-email-jay.xu@rock-chips.com>
Hi Jianqun,
Am Montag, 13. Oktober 2014, 08:44:16 schrieb Jianqun:
> The relation of i2s nodes as follows:
> i2s_src 1 1 594000000 0
> i2s_frac 1 1 11289600 0
> i2s_pre 1 1 11289600 0
> sclk_i2s0 1 1 11289600 0
> i2s0_clkout 0 0 11289600 0
> hclk_i2s0 1 1 148500000 0
>
> "sclk_i2s0" is the master clock, should allow to set its parent's rate.
> Add flag CLK_SET_RATE_PARENT for "i2s_frac", "i2s_pre" and "sclk_i2s0".
>
> Tested on rk3288 board using max98090, with command "aplay <music.wav>"
> and cat /sys/kernel/debug/clk/clk_summary |grep i2s
>
> Signed-off-by: Jianqun <jay.xu@rock-chips.com>
It looks like this is already in the mainline kernel [0].
It seems like I didn't catch the "Change-Id" at the time, and it is the
variant where i2s_clkout can set the parent rates.
Could you do a follow-up patch removing the CLK_SET_RATE_PARENT from
i2s_clkout again please?
Thanks
Heiko
[0]
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fc69ed70c16a31d6a77ec47a30a9fe941f763f1e
> ---
> change since v1:
> - no "Change-Id"s in upstream patches, suggested by Heiko
> - to limit i2s0_clkout to select between its two parent without being able
> influence the core i2s clock, suggested by Heiko
>
> drivers/clk/rockchip/clk-rk3288.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c
> b/drivers/clk/rockchip/clk-rk3288.c index b22a2d2..ae32d78 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -238,15 +238,15 @@ static struct rockchip_clk_branch
> rk3288_clk_branches[] __initdata = { COMPOSITE(0, "i2s_src",
> mux_pll_src_cpll_gpll_p, 0,
> RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS,
> RK3288_CLKGATE_CON(4), 1, GFLAGS),
> - COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0,
> + COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
> RK3288_CLKSEL_CON(8), 0,
> RK3288_CLKGATE_CON(4), 2, GFLAGS),
> - MUX(0, "i2s_pre", mux_i2s_pre_p, 0,
> + MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
> RK3288_CLKSEL_CON(4), 8, 2, MFLAGS),
> COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0,
> RK3288_CLKSEL_CON(4), 12, 1, MFLAGS,
> RK3288_CLKGATE_CON(4), 0, GFLAGS),
> - GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0,
> + GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT,
> RK3288_CLKGATE_CON(4), 3, GFLAGS),
>
> MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,
WARNING: multiple messages have this Message-ID (diff)
From: "Heiko Stübner" <heiko@sntech.de>
To: Jianqun <jay.xu@rock-chips.com>
Cc: mturquette@linaro.org, dianders@chromium.org,
kever.yang@rock-chips.com, dbasehore@chromium.org,
mark.yao@rock-chips.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, huangtao@rock-chips.com,
cf@rock-chips.com
Subject: Re: [PATCH v2] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate
Date: Thu, 16 Oct 2014 21:17:06 +0200 [thread overview]
Message-ID: <5441807.rM669MWZMA@phil> (raw)
In-Reply-To: <1413161056-10273-1-git-send-email-jay.xu@rock-chips.com>
Hi Jianqun,
Am Montag, 13. Oktober 2014, 08:44:16 schrieb Jianqun:
> The relation of i2s nodes as follows:
> i2s_src 1 1 594000000 0
> i2s_frac 1 1 11289600 0
> i2s_pre 1 1 11289600 0
> sclk_i2s0 1 1 11289600 0
> i2s0_clkout 0 0 11289600 0
> hclk_i2s0 1 1 148500000 0
>
> "sclk_i2s0" is the master clock, should allow to set its parent's rate.
> Add flag CLK_SET_RATE_PARENT for "i2s_frac", "i2s_pre" and "sclk_i2s0".
>
> Tested on rk3288 board using max98090, with command "aplay <music.wav>"
> and cat /sys/kernel/debug/clk/clk_summary |grep i2s
>
> Signed-off-by: Jianqun <jay.xu@rock-chips.com>
It looks like this is already in the mainline kernel [0].
It seems like I didn't catch the "Change-Id" at the time, and it is the
variant where i2s_clkout can set the parent rates.
Could you do a follow-up patch removing the CLK_SET_RATE_PARENT from
i2s_clkout again please?
Thanks
Heiko
[0]
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=fc69ed70c16a31d6a77ec47a30a9fe941f763f1e
> ---
> change since v1:
> - no "Change-Id"s in upstream patches, suggested by Heiko
> - to limit i2s0_clkout to select between its two parent without being able
> influence the core i2s clock, suggested by Heiko
>
> drivers/clk/rockchip/clk-rk3288.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c
> b/drivers/clk/rockchip/clk-rk3288.c index b22a2d2..ae32d78 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -238,15 +238,15 @@ static struct rockchip_clk_branch
> rk3288_clk_branches[] __initdata = { COMPOSITE(0, "i2s_src",
> mux_pll_src_cpll_gpll_p, 0,
> RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS,
> RK3288_CLKGATE_CON(4), 1, GFLAGS),
> - COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0,
> + COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
> RK3288_CLKSEL_CON(8), 0,
> RK3288_CLKGATE_CON(4), 2, GFLAGS),
> - MUX(0, "i2s_pre", mux_i2s_pre_p, 0,
> + MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
> RK3288_CLKSEL_CON(4), 8, 2, MFLAGS),
> COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0,
> RK3288_CLKSEL_CON(4), 12, 1, MFLAGS,
> RK3288_CLKGATE_CON(4), 0, GFLAGS),
> - GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0,
> + GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT,
> RK3288_CLKGATE_CON(4), 3, GFLAGS),
>
> MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,
next prev parent reply other threads:[~2014-10-16 19:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 3:12 [PATCH] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate Jianqun
2014-09-30 3:12 ` Jianqun
2014-09-30 3:38 ` Kever Yang
2014-09-30 3:38 ` Kever Yang
2014-09-30 3:44 ` Jianqun
2014-09-30 3:44 ` Jianqun
2014-10-11 18:54 ` Heiko Stübner
2014-10-11 18:54 ` Heiko Stübner
2014-10-13 0:32 ` Jianqun
2014-10-13 0:32 ` Jianqun
2014-10-13 0:44 ` [PATCH v2] " Jianqun
2014-10-13 0:44 ` Jianqun
2014-10-16 19:17 ` Heiko Stübner [this message]
2014-10-16 19:17 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5441807.rM669MWZMA@phil \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.