From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Kumar Gala <galak@codeaurora.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"broonie@kernel.org" <broonie@kernel.org>,
"lee.jones@linaro.org" <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Russell King <linux@arm.linux.org.uk>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"arm@kernel.org" <arm@kernel.org>,
"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>
Subject: Re: [PATCH v2 1/4] ARM: dts: apq8064: add RPM regulators support
Date: Tue, 30 Sep 2014 16:48:56 +0100 [thread overview]
Message-ID: <542AD0E8.5030605@linaro.org> (raw)
In-Reply-To: <20140930151437.GM28481@sonymobile.com>
On 30/09/14 16:14, Bjorn Andersson wrote:
> On Tue 30 Sep 07:09 PDT 2014, Srinivas Kandagatla wrote:
>
>> This patch adds rpm node to apq8064 dt as rpm would be used by other
>> devices for regulator support. Also adds all the regulators in the rpm.
>>
>
> Some comments on the compatibles, based on rpm-regulator-8960 msm-3.4.
>
Thanks for the review. I kind of grabbed a table from datasheet,
obviously my interpretation of some of them are wrong. I should have
looked at rpm-regulator-8960.c.
I will fix them in next version.
> After giving this some more thought I think it would be good to defer the
> voltage definition to the dts files, at least for the ldos (as these are being
> re-purposed).
>
I agree with you.
> That way the dts implementor will be the one frying their components and not us
> because some default value kicking in because someone miss-spelled or forgot to
> override a certain voltage.
>
Yes.. I had the same feeling when I started adding this.. But I wanted
to send it for review and see.
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064.dtsi | 297 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 297 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
>
> [..]
>
>> + pm8921_s5: pm8921-s5 {
>> + compatible = "qcom,rpm-pm8921-smps";
>
> qcom,rpm-pm8921-ftsmps
>
>> + reg = <QCOM_RPM_PM8921_SMPS5>;
>> + regulator-min-microvolt = < 850000>;
>> + regulator-max-microvolt = <1300000>;
>> + };
>> +
>> + pm8921_s6: pm8921-s6 {
>> + compatible = "qcom,rpm-pm8921-smps";
>
> qcom,rpm-pm8921-ftsmps
>
>> + reg = <QCOM_RPM_PM8921_SMPS6>;
>> + regulator-min-microvolt = < 850000>;
>> + regulator-max-microvolt = <1300000>;
>> + };
>> +
>> + pm8921_s7: pm8921-s7 {
>> + compatible = "qcom,rpm-pm8921-smps";
>> + reg = <QCOM_RPM_PM8921_SMPS7>;
>> + regulator-min-microvolt = < 500000>;
>> + regulator-max-microvolt = <1350000>;
>> + };
>> +
>> + pm8921_s8: pm8921-s8 {
>> + compatible = "qcom,rpm-pm8921-smps";
>> + reg = <QCOM_RPM_PM8921_SMPS8>;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <2350000>;
>> + };
>> +
>> + /* PMOS LDO */
>> + pm8921_l1: pm8921-l1 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo
>
>> + reg = <QCOM_RPM_PM8921_LDO1>;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1450000>;
>> + };
>> +
>> + pm8921_l2: pm8921-l2 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo
>
>> + reg = <QCOM_RPM_PM8921_LDO2>;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>
> [..]
>
>> +
>> + pm8921_l24: pm8921-l24 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO24>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l25: pm8921-l25 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO25>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l26: pm8921-l26 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO26>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l27: pm8921-l27 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO27>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l28: pm8921-l28 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO28>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1500000>;
>> + };
>> +
>
> [..]
>
>> +
>
> pm8921_usb_switch: pm8921-usb-switch {
> compatible = "qcom,rpm-pm8921-switch";
> reg = <QCOM_RPM_USB_OTG_SWITCH>;
> };
>
> pm8921_hdmi_switch: pm8921-hdmi-switch {
> compatible = "qcom,rpm-pm8921-switch";
> reg = <QCOM_RPM_HDMI_SWITCH>;
> };
>
> pm8921_ncp: pm8921-ncp {
> compatible = "qcom,rpm-pm8921-ncp";
> reg = <QCOM_RPM_PM8921_NCP>;
> };
>> + };
>> +
>> /* Temporary fixed regulator */
>> vsdcc_fixed: vsdcc-regulator {
>> compatible = "regulator-fixed";
>> --
>> 1.9.1
>>
WARNING: multiple messages have this Message-ID (diff)
From: srinivas.kandagatla@linaro.org (Srinivas Kandagatla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] ARM: dts: apq8064: add RPM regulators support
Date: Tue, 30 Sep 2014 16:48:56 +0100 [thread overview]
Message-ID: <542AD0E8.5030605@linaro.org> (raw)
In-Reply-To: <20140930151437.GM28481@sonymobile.com>
On 30/09/14 16:14, Bjorn Andersson wrote:
> On Tue 30 Sep 07:09 PDT 2014, Srinivas Kandagatla wrote:
>
>> This patch adds rpm node to apq8064 dt as rpm would be used by other
>> devices for regulator support. Also adds all the regulators in the rpm.
>>
>
> Some comments on the compatibles, based on rpm-regulator-8960 msm-3.4.
>
Thanks for the review. I kind of grabbed a table from datasheet,
obviously my interpretation of some of them are wrong. I should have
looked at rpm-regulator-8960.c.
I will fix them in next version.
> After giving this some more thought I think it would be good to defer the
> voltage definition to the dts files, at least for the ldos (as these are being
> re-purposed).
>
I agree with you.
> That way the dts implementor will be the one frying their components and not us
> because some default value kicking in because someone miss-spelled or forgot to
> override a certain voltage.
>
Yes.. I had the same feeling when I started adding this.. But I wanted
to send it for review and see.
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>> arch/arm/boot/dts/qcom-apq8064.dtsi | 297 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 297 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
>
> [..]
>
>> + pm8921_s5: pm8921-s5 {
>> + compatible = "qcom,rpm-pm8921-smps";
>
> qcom,rpm-pm8921-ftsmps
>
>> + reg = <QCOM_RPM_PM8921_SMPS5>;
>> + regulator-min-microvolt = < 850000>;
>> + regulator-max-microvolt = <1300000>;
>> + };
>> +
>> + pm8921_s6: pm8921-s6 {
>> + compatible = "qcom,rpm-pm8921-smps";
>
> qcom,rpm-pm8921-ftsmps
>
>> + reg = <QCOM_RPM_PM8921_SMPS6>;
>> + regulator-min-microvolt = < 850000>;
>> + regulator-max-microvolt = <1300000>;
>> + };
>> +
>> + pm8921_s7: pm8921-s7 {
>> + compatible = "qcom,rpm-pm8921-smps";
>> + reg = <QCOM_RPM_PM8921_SMPS7>;
>> + regulator-min-microvolt = < 500000>;
>> + regulator-max-microvolt = <1350000>;
>> + };
>> +
>> + pm8921_s8: pm8921-s8 {
>> + compatible = "qcom,rpm-pm8921-smps";
>> + reg = <QCOM_RPM_PM8921_SMPS8>;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <2350000>;
>> + };
>> +
>> + /* PMOS LDO */
>> + pm8921_l1: pm8921-l1 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo
>
>> + reg = <QCOM_RPM_PM8921_LDO1>;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1450000>;
>> + };
>> +
>> + pm8921_l2: pm8921-l2 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo
>
>> + reg = <QCOM_RPM_PM8921_LDO2>;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>
> [..]
>
>> +
>> + pm8921_l24: pm8921-l24 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO24>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l25: pm8921-l25 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO25>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l26: pm8921-l26 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO26>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l27: pm8921-l27 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO27>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1250000>;
>> + };
>> +
>> + pm8921_l28: pm8921-l28 {
>> + compatible = "qcom,rpm-pm8921-pldo";
>
> qcom,rpm-pm8921-nldo1200
>
>> + reg = <QCOM_RPM_PM8921_LDO28>;
>> + regulator-min-microvolt = <0750000>;
>> + regulator-max-microvolt = <1500000>;
>> + };
>> +
>
> [..]
>
>> +
>
> pm8921_usb_switch: pm8921-usb-switch {
> compatible = "qcom,rpm-pm8921-switch";
> reg = <QCOM_RPM_USB_OTG_SWITCH>;
> };
>
> pm8921_hdmi_switch: pm8921-hdmi-switch {
> compatible = "qcom,rpm-pm8921-switch";
> reg = <QCOM_RPM_HDMI_SWITCH>;
> };
>
> pm8921_ncp: pm8921-ncp {
> compatible = "qcom,rpm-pm8921-ncp";
> reg = <QCOM_RPM_PM8921_NCP>;
> };
>> + };
>> +
>> /* Temporary fixed regulator */
>> vsdcc_fixed: vsdcc-regulator {
>> compatible = "regulator-fixed";
>> --
>> 1.9.1
>>
next prev parent reply other threads:[~2014-09-30 15:48 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 9:14 [PATCH 0/4] ARM: DT: apq8064 DT patches Srinivas Kandagatla
2014-09-29 9:14 ` Srinivas Kandagatla
2014-09-29 9:14 ` Srinivas Kandagatla
2014-09-29 9:14 ` [PATCH 1/4] ARM: DT: apq8064: add rpm support Srinivas Kandagatla
2014-09-29 9:14 ` Srinivas Kandagatla
2014-09-29 22:17 ` Stephen Boyd
2014-09-29 22:17 ` Stephen Boyd
2014-09-30 5:02 ` Bjorn Andersson
2014-09-30 5:02 ` Bjorn Andersson
2014-09-30 18:27 ` Stephen Boyd
2014-09-30 18:27 ` Stephen Boyd
2014-09-30 19:00 ` Bjorn Andersson
2014-09-30 19:00 ` Bjorn Andersson
2014-09-30 19:13 ` Stephen Boyd
2014-09-30 19:13 ` Stephen Boyd
2014-09-30 19:56 ` Bjorn Andersson
2014-09-30 19:56 ` Bjorn Andersson
2014-09-30 7:44 ` Srinivas Kandagatla
2014-09-30 7:44 ` Srinivas Kandagatla
[not found] ` <1411982092-7922-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-30 5:11 ` Bjorn Andersson
2014-09-30 5:11 ` Bjorn Andersson
2014-09-30 5:11 ` Bjorn Andersson
[not found] ` <20140930051138.GH28481-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-09-30 7:49 ` Srinivas Kandagatla
2014-09-30 7:49 ` Srinivas Kandagatla
2014-09-30 7:49 ` Srinivas Kandagatla
2014-09-29 9:15 ` [PATCH 2/4] ARM: DT: apq8064: Add usb host support Srinivas Kandagatla
2014-09-29 9:15 ` Srinivas Kandagatla
[not found] ` <1411982100-7964-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-09-30 5:17 ` Bjorn Andersson
2014-09-30 5:17 ` Bjorn Andersson
2014-09-30 5:17 ` Bjorn Andersson
2014-09-30 8:16 ` Srinivas Kandagatla
2014-09-30 8:16 ` Srinivas Kandagatla
2014-09-29 9:15 ` [PATCH 3/4] ARM: DT: apq8064: Add USB OTG support Srinivas Kandagatla
2014-09-29 9:15 ` Srinivas Kandagatla
2014-09-29 10:26 ` Kiran Padwal
2014-09-29 10:26 ` Kiran Padwal
2014-09-29 10:53 ` Mark Rutland
2014-09-29 10:53 ` Mark Rutland
2014-09-29 11:27 ` Srinivas Kandagatla
2014-09-29 11:27 ` Srinivas Kandagatla
2014-09-29 9:15 ` [PATCH 4/4] ARM: DT: apq8064: Add SATA controller support Srinivas Kandagatla
2014-09-29 9:15 ` Srinivas Kandagatla
2014-09-29 22:20 ` Stephen Boyd
2014-09-29 22:20 ` Stephen Boyd
[not found] ` <5429DB3D.5080701-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2014-09-30 8:18 ` Srinivas Kandagatla
2014-09-30 8:18 ` Srinivas Kandagatla
2014-09-30 8:18 ` Srinivas Kandagatla
2014-09-30 14:09 ` [PATCH v2 0/4] ARM: dts: apq8064 DT patches Srinivas Kandagatla
2014-09-30 14:09 ` Srinivas Kandagatla
2014-09-30 14:09 ` [PATCH v2 1/4] ARM: dts: apq8064: add RPM regulators support Srinivas Kandagatla
2014-09-30 14:09 ` Srinivas Kandagatla
2014-09-30 15:14 ` Bjorn Andersson
2014-09-30 15:14 ` Bjorn Andersson
2014-09-30 15:48 ` Srinivas Kandagatla [this message]
2014-09-30 15:48 ` Srinivas Kandagatla
2014-09-30 14:09 ` [PATCH v2 2/4] ARM: dts: apq8064: Add usb host support Srinivas Kandagatla
2014-09-30 14:09 ` Srinivas Kandagatla
2014-09-30 14:10 ` [PATCH v2 3/4] ARM: dts: apq8064: Add USB OTG support Srinivas Kandagatla
2014-09-30 14:10 ` Srinivas Kandagatla
2014-09-30 14:10 ` [PATCH v2 4/4] ARM: dts: apq8064: Add SATA controller support Srinivas Kandagatla
2014-09-30 14:10 ` Srinivas Kandagatla
2014-09-30 18:45 ` [PATCH v2 0/4] ARM: dts: apq8064 DT patches Kevin Hilman
2014-09-30 18:45 ` Kevin Hilman
2014-10-01 9:05 ` [PATCH v3 " Srinivas Kandagatla
2014-10-01 9:05 ` Srinivas Kandagatla
[not found] ` <1412154355-2639-1-git-send-email-srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-10-01 9:06 ` [PATCH v3 1/4] ARM: dts: apq8064: add RPM regulators support Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
2014-10-01 9:06 ` [PATCH v3 4/4] ARM: dts: apq8064: Add SATA controller support Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
2014-10-01 9:06 ` [PATCH v3 2/4] ARM: dts: apq8064: Add usb host support Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
2014-10-01 9:06 ` [PATCH v3 3/4] ARM: dts: apq8064: Add USB OTG support Srinivas Kandagatla
2014-10-01 9:06 ` Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542AD0E8.5030605@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=arm@kernel.org \
--cc=bjorn.andersson@sonymobile.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.