From: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawn.guo@freescale.com>,
Sascha Hauer <kernel@pengutronix.de>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
perex@perex.cz, Takashi Iwai <tiwai@suse.de>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Date: Wed, 1 Oct 2014 16:52:29 +0300 [thread overview]
Message-ID: <542C071D.1030507@sam-solutions.com> (raw)
In-Reply-To: <CAOMZO5BS6X2NTY4q7RKoKdhJNbEANSa2wXur3_Hyxp8nQn5Avw@mail.gmail.com>
On 01/10/14 16:45, Fabio Estevam wrote:
> On Wed, Oct 1, 2014 at 10:40 AM, Dmitry Lavnikevich
> <d.lavnikevich@sam-solutions.com> wrote:
>
>>> No need to have this 'regulator-always-on'
>>>
>>
>> why is there no need for 'regulator-alweys-on'? I see it in
>
> For a regulator that is not GPIO controlled you don't need to pass
> 'regulator-always-on'.
Ok, I will remove it also.
I will wait some time for other notes on patches and resend patchset.
WARNING: multiple messages have this Message-ID (diff)
From: d.lavnikevich@sam-solutions.com (Dmitry Lavnikevich)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Date: Wed, 1 Oct 2014 16:52:29 +0300 [thread overview]
Message-ID: <542C071D.1030507@sam-solutions.com> (raw)
In-Reply-To: <CAOMZO5BS6X2NTY4q7RKoKdhJNbEANSa2wXur3_Hyxp8nQn5Avw@mail.gmail.com>
On 01/10/14 16:45, Fabio Estevam wrote:
> On Wed, Oct 1, 2014 at 10:40 AM, Dmitry Lavnikevich
> <d.lavnikevich@sam-solutions.com> wrote:
>
>>> No need to have this 'regulator-always-on'
>>>
>>
>> why is there no need for 'regulator-alweys-on'? I see it in
>
> For a regulator that is not GPIO controlled you don't need to pass
> 'regulator-always-on'.
Ok, I will remove it also.
I will wait some time for other notes on patches and resend patchset.
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawn.guo@freescale.com>,
Sascha Hauer <kernel@pengutronix.de>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>, <perex@perex.cz>,
Takashi Iwai <tiwai@suse.de>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Date: Wed, 1 Oct 2014 16:52:29 +0300 [thread overview]
Message-ID: <542C071D.1030507@sam-solutions.com> (raw)
In-Reply-To: <CAOMZO5BS6X2NTY4q7RKoKdhJNbEANSa2wXur3_Hyxp8nQn5Avw@mail.gmail.com>
On 01/10/14 16:45, Fabio Estevam wrote:
> On Wed, Oct 1, 2014 at 10:40 AM, Dmitry Lavnikevich
> <d.lavnikevich@sam-solutions.com> wrote:
>
>>> No need to have this 'regulator-always-on'
>>>
>>
>> why is there no need for 'regulator-alweys-on'? I see it in
>
> For a regulator that is not GPIO controlled you don't need to pass
> 'regulator-always-on'.
Ok, I will remove it also.
I will wait some time for other notes on patches and resend patchset.
next prev parent reply other threads:[~2014-10-01 13:52 UTC|newest]
Thread overview: 137+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 13:46 [PATCH 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
[not found] ` <1410356809-26179-2-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-09-11 8:47 ` Philipp Zabel
2014-09-11 8:47 ` Philipp Zabel
2014-09-11 8:47 ` Philipp Zabel
[not found] ` <1410425238.4011.18.camel-+qGW7pzALmz7o/J7KWpOmN53zsg1cpMQ@public.gmane.org>
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 2/5] ASoC: fsl: add imx-tlv320aic3x machine driver Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:27 ` Markus Pargmann
2014-09-10 14:27 ` [alsa-devel] " Markus Pargmann
2014-09-10 14:27 ` Markus Pargmann
2014-09-10 18:14 ` Nicolin Chen
2014-09-10 18:14 ` Nicolin Chen
[not found] ` <CAGoOwPSpkNy6uNVAjG2HgiHHscKZjL5wgVrkyGwWCmyU7x+gWg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-09-11 6:40 ` Markus Pargmann
2014-09-11 6:40 ` Markus Pargmann
2014-09-11 6:40 ` Markus Pargmann
2014-09-11 12:41 ` Dmitry Lavnikevich
2014-09-11 12:41 ` Dmitry Lavnikevich
2014-09-11 12:41 ` Dmitry Lavnikevich
[not found] ` <1410356809-26179-3-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 13:46 ` [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx-tlv320aic3x by default Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 4/5] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 5/5] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-10 13:46 ` Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:14 ` Alexander Shiyan
2014-09-12 16:14 ` Alexander Shiyan
2014-09-12 16:14 ` Alexander Shiyan
2014-09-12 16:14 ` Alexander Shiyan
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:40 ` [alsa-devel] " Fabio Estevam
2014-09-12 16:40 ` Fabio Estevam
2014-09-15 12:07 ` Dmitry Lavnikevich
2014-09-15 12:07 ` Dmitry Lavnikevich
2014-09-15 12:07 ` Dmitry Lavnikevich
2014-09-16 1:46 ` Shawn Guo
2014-09-16 1:46 ` Shawn Guo
2014-09-16 1:46 ` Shawn Guo
2014-09-12 16:04 ` [PATCH v2 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x and simple-audio-card by default Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-12 16:04 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-10-01 12:11 ` Fabio Estevam
2014-10-01 12:11 ` Fabio Estevam
[not found] ` <CAOMZO5CgrQ6Wf6kStga40TUKx9dARygCNB4OYSUoG3c8eUYbrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-01 13:40 ` Dmitry Lavnikevich
2014-10-01 13:40 ` Dmitry Lavnikevich
2014-10-01 13:40 ` Dmitry Lavnikevich
[not found] ` <542C0441.5080508-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:52 ` Dmitry Lavnikevich [this message]
2014-10-01 13:52 ` Dmitry Lavnikevich
2014-10-01 13:52 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:08 ` Dmitry Lavnikevich
2014-09-16 8:09 ` [PATCH v3 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-16 8:09 ` Dmitry Lavnikevich
2014-09-16 8:09 ` Dmitry Lavnikevich
2014-09-16 8:09 ` Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
[not found] ` <1412342336-25700-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-03 13:18 ` [PATCH v4 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
2014-10-03 13:18 ` Dmitry Lavnikevich
[not found] ` <1412342336-25700-5-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-03 15:08 ` Mark Brown
2014-10-03 15:08 ` Mark Brown
2014-10-03 15:08 ` Mark Brown
2014-10-03 15:22 ` Dmitry Lavnikevich
2014-10-22 9:08 ` [PATCH v4 0/3 RESEND] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-22 9:08 ` Dmitry Lavnikevich
2014-10-22 9:08 ` Dmitry Lavnikevich
2014-10-22 9:11 ` [PATCH v4 RESEND 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-22 9:11 ` Dmitry Lavnikevich
2014-10-22 9:11 ` Dmitry Lavnikevich
[not found] ` <1413968914-13689-1-git-send-email-d.lavnikevich-H6HfJ9slvY0Aspv4Qr0y0gC/G2K4zDHf@public.gmane.org>
2014-10-22 9:08 ` [PATCH v4 RESEND 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-22 9:08 ` Dmitry Lavnikevich
2014-10-22 9:08 ` Dmitry Lavnikevich
2014-10-22 9:12 ` [PATCH v4 RESEND 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-22 9:12 ` Dmitry Lavnikevich
2014-10-22 9:12 ` Dmitry Lavnikevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542C071D.1030507@sam-solutions.com \
--to=d.lavnikevich@sam-solutions.com \
--cc=alsa-devel@alsa-project.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@freescale.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.