Re: [PATCH 1/3] powerpc/dts: Factorize the clock control node

[Emil Medve <Emilian.Medve@Freescale.com>]

Hello Scott,


On 10/28/2014 06:21 PM, Scott Wood wrote:
> On Wed, 2014-10-22 at 09:42 -0500, Emil Medve wrote:
>> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
>> Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1
> 
> Please remove gerrit stuff prior to submitting.

I did remove the bulk of it. I wanted to keep the Change-Id so I can
easily correlate the upstream patches with the sordid internal history.
Seems the upstream history has enough instances of 'Change-Id' for this
not to be an issue

>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
>> new file mode 100644
>> index 0000000..4871048
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
>> @@ -0,0 +1,78 @@
>> +/*
>> + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
>> + *
>> + * Copyright 2014 Freescale Semiconductor Inc.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following conditions are met:
>> + *     * Redistributions of source code must retain the above copyright
>> + *	 notice, this list of conditions and the following disclaimer.
>> + *     * Redistributions in binary form must reproduce the above copyright
>> + *	 notice, this list of conditions and the following disclaimer in the
>> + *	 documentation and/or other materials provided with the distribution.
>> + *     * Neither the name of Freescale Semiconductor nor the
>> + *	 names of its contributors may be used to endorse or promote products
>> + *	 derived from this software without specific prior written permission.
>> + *
>> + *
>> + * ALTERNATIVELY, this software may be distributed under the terms of the
>> + * GNU General Public License ("GPL") as published by the Free Software
>> + * Foundation, either version 2 of that License or (at your option) any
>> + * later version.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
>> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
>> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
>> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
>> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
>> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
>> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
>> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
>> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +global-utilities@e1000 {
>> +	compatible = "fsl,qoriq-clockgen-1.0";
>> +	ranges = <0x0 0xe1000 0x1000>;
>> +	reg = <0xe1000 0x1000>;
>> +	clock-frequency = <0>;
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +
>> +	sysclk: sysclk {
>> +		#clock-cells = <0>;
>> +		compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
>> +		clock-output-names = "sysclk";
>> +	};
>> +	pll0: pll0@800 {
>> +		#clock-cells = <1>;
>> +		reg = <0x800 0x4>;
>> +		compatible = "fsl,qoriq-core-pll-1.0";
>> +		clocks = <&sysclk>;
>> +		clock-output-names = "pll0", "pll0-div2";
>> +	};
>> +	pll1: pll1@820 {
>> +		#clock-cells = <1>;
>> +		reg = <0x820 0x4>;
>> +		compatible = "fsl,qoriq-core-pll-1.0";
>> +		clocks = <&sysclk>;
>> +		clock-output-names = "pll1", "pll1-div2";
>> +	};
>> +	mux0: mux0@0 {
>> +		#clock-cells = <0>;
>> +		reg = <0x0 0x4>;
>> +		compatible = "fsl,qoriq-core-mux-1.0";
>> +		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
>> +		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
>> +		clock-output-names = "cmux0";
>> +	};
>> +	mux1: mux1@20 {
>> +		#clock-cells = <0>;
>> +		reg = <0x20 0x4>;
>> +		compatible = "fsl,qoriq-core-mux-1.0";
>> +		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
>> +		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
>> +		clock-output-names = "cmux1";
>> +	};
>> +};
> 
> I don't think the mux stuff belongs here, given that clockgen2.dtsi
> doesn't have it, and I saw at least one clockgen1 user needing to
> supplement this with more muxes.

The intent was to put here devices/nodes that are common per chassis
from the low to high end. Specific SoC would change/augment this as
appropriate. I could have put each node in its own file as we've done
elsewhere, but I thought it would be too much

Yes, chassis v1 and v2 have differences, but that's not unexpected

>> @@ -1068,7 +1043,6 @@
>>  			clocks = <&sysclk>;
>>  			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
>>  		};
>> -
>>  		pll3: pll3@860 {
>>  			#clock-cells = <1>;
>>  			reg = <0x860 0x4>;
>> @@ -1076,7 +1050,6 @@
>>  			clocks = <&sysclk>;
>>  			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
>>  		};
>> -
>>  		pll4: pll4@880 {
>>  			#clock-cells = <1>;
>>  			reg = <0x880 0x4>;
> 
> Why?

Why what?


Cheers,