* Re: linux kernel 3.17, freeze on resume
[not found] ` <CAKb7UvhprANm0zP5X1o6nZL=rt1m2iubx0HRq_9_dhc-91sh9A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-10-29 12:28 ` John H. Mountcastle
@ 2014-10-29 13:07 ` John H. Mountcastle
2014-11-01 18:15 ` John H. Mountcastle
2 siblings, 0 replies; 7+ messages in thread
From: John H. Mountcastle @ 2014-10-29 13:07 UTC (permalink / raw)
To: Ilia Mirkin; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
[-- Attachment #1.1: Type: text/plain, Size: 2482 bytes --]
I put the machine into hibernate by closing the lid. When I reactivated
it, the screen flashed once then went dark. I ssh'd from another machine
and grabbed dmesg, attached, It's been about ten minutes and the screen
is still dark and inert. I restarted gdm from my shell and poof, got a
login screeen. Oddly, when I log in, it displays the desktop for a
moment them locks the screen. Let me know if dmesg tells you anything,
it does not me. By the way, I'm running fedora Desktop which I believe
is gnome-shell, as you mentioned.
73 | *KB3KEY* | John | Mt.Airy,MD
On 10/25/2014 09:24 PM, Ilia Mirkin wrote:
> Can you grab a copy of dmesg after resume? Can you try waiting ~2
> minutes to see if gdm will restart on its own (due to X dying)? In
> general, nouveau is less-than-great at resuming while 3d applications
> are running. This used to be rare, but now people have things like
> gnome-shell/etc which complicate matters.
>
> On Sat, Oct 25, 2014 at 10:25 AM, John Mountcastle <mtcstle-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> wrote:
>> This may not be the proper place to raise this question but I've had little
>> luck elsewhere.
>> After trying again, unsuccessfully this time, to install the proprietary
>> NVIDIA driver, I've decided to focus my efforts on the open source Nouveau
>> driver. I've seen video drivers blamed for varying degrees of "freeze on
>> resume" but I'm not certain that's what I'm up against. When I resume after
>> hibernate, Plymouth fails then I get a completely inert machine. Lights are
>> on but keyboard nor mouse will elicit any response. If I go to another
>> machine and ssh to a shell and do, #systemctl restart gdm, a clean Xdisplay
>> pops up showing the log in screen. Now all is well. I'm running Gnome 3 on
>> kernel 3.17.1-302.fc21.x86_64 on an HP Elitebook 8440p with NVIDIA GT218N
>> [NVS 3100M] GPU, 8 GIG RAM and SSD. Can you help me help you to help me?
>> Do you suppose this is an as yet unreported driver bug or something else. It
>> may be interesting to note that about one time in five to seven, the machine
>> hangs on a reboot before getting anything at all onto the screen.
>> __________________
>> Never believe the set of that which you understand rivals the universe of
>> that which may go wrong -- mtcstle
>>
>>
>> _______________________________________________
>> Nouveau mailing list
>> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
>> http://lists.freedesktop.org/mailman/listinfo/nouveau
>>
[-- Attachment #1.2: Type: text/html, Size: 3326 bytes --]
[-- Attachment #2: dmesg.201410290851 --]
[-- Type: text/plain, Size: 83911 bytes --]
[ 0.000000] CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-304.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.1 20140930 (Red Hat 4.9.1-11) (GCC) ) #1 SMP Sat Oct 25 00:56:36 UTC 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.17.1-304.fc21.x86_64 root=/dev/mapper/fedora_patuxant-root ro rd.lvm.lv=fedora_patuxant/root rd.lvm.lv=fedora_patuxant/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000befc2000-0x00000000bf6c1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf6c2000-0x00000000bf7c1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7c2000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 8440p/172B, BIOS 68CCU Ver. F.11 11/25/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0202e000, 0x0202efff] PGTABLE
[ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE
[ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
[ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbefc1fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbedfffff] page 2M
[ 0.000000] [mem 0xbee00000-0xbefc1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x02032000, 0x02032fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bd3000-0x36de1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FDDC0 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000BF7FE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v03 HPQOEM 172B 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BF7D6000 020167 (v02 HPQOEM 172B 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BF760000 000040
[ 0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x00000000BF7FA000 0000BC (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x00000000BF7F7000 000032 (v02 HPQOEM 172B 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7D5000 00064F (v01 HPQOEM SataPri 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7D4000 000692 (v01 HPQOEM SataSec 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7D2000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[ 0.000000] ACPI: SLIC 0x00000000BF7D1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7D0000 000A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7CF000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 0x00000000BF7CE000 000225 (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: ASF! 0x00000000BF7F8000 0000A0 (v32 HPQOEM 172B 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23bffffff]
[ 0.000000] NODE_DATA [mem 0x23bfe6000-0x23bff9fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbefc1fff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x23bffffff]
[ 0.000000] On node 0 totalpages: 2060129
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12160 pages used for memmap
[ 0.000000] DMA32 zone: 778179 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbefc2000-0xbf6c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf6c2000-0xbf7c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7c2000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023bc00000 s88384 r8192 d22208 u262144
[ 0.000000] pcpu-alloc: s88384 r8192 d22208 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027660
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.17.1-304.fc21.x86_64 root=/dev/mapper/fedora_patuxant-root ro rd.lvm.lv=fedora_patuxant/root rd.lvm.lv=fedora_patuxant/swap rhgb quiet LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 8006940K/8240516K available (7463K kernel code, 1231K rwdata, 3252K rodata, 1468K init, 1540K bss, 233576K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:65792 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2659.843 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.68 BogoMIPS (lpj=2659843)
[ 0.000034] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20140724
[ 0.012984] ACPI: All ACPI Tables successfully acquired
[ 0.033172] Security Framework initialized
[ 0.033181] SELinux: Initializing.
[ 0.033187] SELinux: Starting in permissive mode
[ 0.033816] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035728] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036561] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036575] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036812] Initializing cgroup subsys memory
[ 0.036818] Initializing cgroup subsys devices
[ 0.036821] Initializing cgroup subsys freezer
[ 0.036824] Initializing cgroup subsys net_cls
[ 0.036826] Initializing cgroup subsys blkio
[ 0.036828] Initializing cgroup subsys perf_event
[ 0.036830] Initializing cgroup subsys net_prio
[ 0.036833] Initializing cgroup subsys hugetlb
[ 0.036855] CPU: Physical Processor ID: 0
[ 0.036856] CPU: Processor Core ID: 0
[ 0.036861] mce: CPU supports 9 MCE banks
[ 0.036871] CPU0: Thermal monitoring enabled (TM1)
[ 0.036881] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.036972] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[ 0.037906] ftrace: allocating 27196 entries in 107 pages
[ 0.050830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060835] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[ 0.162459] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.162476] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.162478] ... version: 3
[ 0.162479] ... bit width: 48
[ 0.162480] ... generic registers: 4
[ 0.162480] ... value mask: 0000ffffffffffff
[ 0.162481] ... max period: 000000007fffffff
[ 0.162482] ... fixed-purpose events: 3
[ 0.162483] ... event mask: 000000070000000f
[ 0.163976] x86: Booting SMP configuration:
[ 0.163978] .... node #0, CPUs: #1
[ 0.177337] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.177456] #2
[ 0.187899] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 0.190809] #3
[ 0.204061] x86: Booted up 1 node, 4 CPUs
[ 0.204066] smpboot: Total of 4 processors activated (21278.74 BogoMIPS)
[ 0.206475] devtmpfs: initialized
[ 0.209354] PM: Registering ACPI NVS region [mem 0xbf6c2000-0xbf7c1fff] (1048576 bytes)
[ 0.210304] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.210306] pinctrl core: initialized pinctrl subsystem
[ 0.210352] RTC time: 12:42:15, date: 10/29/14
[ 0.210430] NET: Registered protocol family 16
[ 0.210568] cpuidle: using governor menu
[ 0.210633] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.210635] ACPI: bus type PCI registered
[ 0.210637] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.210712] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.210715] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.211170] PCI: Using configuration type 1 for base access
[ 0.214640] ACPI: Added _OSI(Module Device)
[ 0.214642] ACPI: Added _OSI(Processor Device)
[ 0.214643] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214644] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218096] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224783] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.235027] ACPI: Dynamic OEM Table Load:
[ 0.235034] ACPI: SSDT 0xFFFF88022FD12000 00047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.235463] ACPI: Dynamic OEM Table Load:
[ 0.235469] ACPI: SSDT 0xFFFF88022FDE2000 0008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.239676] ACPI: Dynamic OEM Table Load:
[ 0.239682] ACPI: SSDT 0xFFFF88022FDC2C00 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.242173] ACPI: Dynamic OEM Table Load:
[ 0.242178] ACPI: SSDT 0xFFFF88022FDED000 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.680268] ACPI: Interpreter enabled
[ 0.680276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.680280] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.680293] ACPI: (supports S0 S3 S4 S5)
[ 0.680294] ACPI: Using IOAPIC for interrupt routing
[ 0.680321] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.681790] ACPI: Power Resource [APPR] (off)
[ 0.684925] ACPI: Power Resource [COMP] (on)
[ 0.685232] ACPI: Power Resource [LPP] (on)
[ 0.688550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.688556] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.689842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.690531] PCI host bridge to bus 0000:00
[ 0.690534] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.690536] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.690537] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.690539] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.690541] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.690542] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[ 0.690543] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 0.690551] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.690568] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.690633] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.690665] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.690763] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.690792] pci 0000:00:16.0: reg 0x10: [mem 0xd7424000-0xd742400f 64bit]
[ 0.690886] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.690963] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.690986] pci 0000:00:16.3: reg 0x10: [io 0x6080-0x6087]
[ 0.690997] pci 0000:00:16.3: reg 0x14: [mem 0xd742a000-0xd742afff]
[ 0.691174] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.691199] pci 0000:00:19.0: reg 0x10: [mem 0xd7400000-0xd741ffff]
[ 0.691211] pci 0000:00:19.0: reg 0x14: [mem 0xd7429000-0xd7429fff]
[ 0.691221] pci 0000:00:19.0: reg 0x18: [io 0x6000-0x601f]
[ 0.691309] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.691351] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.691393] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.691418] pci 0000:00:1a.0: reg 0x10: [mem 0xd7428000-0xd74283ff]
[ 0.691526] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.691567] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.691611] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.691634] pci 0000:00:1b.0: reg 0x10: [mem 0xd7420000-0xd7423fff 64bit]
[ 0.691740] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.691785] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.691823] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.691925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.692006] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.692112] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.692157] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.692196] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.692301] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.692345] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.692393] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.692417] pci 0000:00:1d.0: reg 0x10: [mem 0xd7427000-0xd74273ff]
[ 0.692524] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.692565] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.692602] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.692702] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.692741] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.692908] pci 0000:00:1f.2: [8086:3b2e] type 00 class 0x01018a
[ 0.692929] pci 0000:00:1f.2: reg 0x10: [io 0x6078-0x607f]
[ 0.692940] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097]
[ 0.692950] pci 0000:00:1f.2: reg 0x18: [io 0x6070-0x6077]
[ 0.692960] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093]
[ 0.692971] pci 0000:00:1f.2: reg 0x20: [io 0x6050-0x605f]
[ 0.692981] pci 0000:00:1f.2: reg 0x24: [io 0x6040-0x604f]
[ 0.692995] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.692996] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.692998] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.692999] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.693108] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[ 0.693129] pci 0000:00:1f.5: reg 0x10: [io 0x6068-0x606f]
[ 0.693139] pci 0000:00:1f.5: reg 0x14: [io 0x608c-0x608f]
[ 0.693150] pci 0000:00:1f.5: reg 0x18: [io 0x6060-0x6067]
[ 0.693160] pci 0000:00:1f.5: reg 0x1c: [io 0x6088-0x608b]
[ 0.693170] pci 0000:00:1f.5: reg 0x20: [io 0x6030-0x603f]
[ 0.693181] pci 0000:00:1f.5: reg 0x24: [io 0x6020-0x602f]
[ 0.693298] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.693325] pci 0000:00:1f.6: reg 0x10: [mem 0xd7426000-0xd7426fff 64bit]
[ 0.693518] pci 0000:01:00.0: [10de:0a6c] type 00 class 0x030000
[ 0.693532] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.693544] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.693557] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.693565] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.693574] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.693683] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.693697] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.693839] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.693841] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.693843] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.693846] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.693909] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.693916] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
[ 0.694032] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[ 0.694036] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.694041] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
[ 0.694151] pci 0000:44:00.0: [8086:4239] type 00 class 0x028000
[ 0.694195] pci 0000:44:00.0: reg 0x10: [mem 0xd3200000-0xd3201fff 64bit]
[ 0.694397] pci 0000:44:00.0: PME# supported from D0 D3hot D3cold
[ 0.694439] pci 0000:44:00.0: System wakeup disabled by ACPI
[ 0.697093] pci 0000:00:1c.3: PCI bridge to [bus 44]
[ 0.697104] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.697195] pci 0000:45:06.0: [1180:0832] type 00 class 0x0c0010
[ 0.697209] pci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.697210] pci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
[ 0.697224] pci 0000:45:06.0: reg 0x10: [mem 0xd3101000-0xd31017ff]
[ 0.697310] pci 0000:45:06.0: supports D1 D2
[ 0.697312] pci 0000:45:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697360] pci 0000:45:06.1: [1180:0822] type 00 class 0x080500
[ 0.697379] pci 0000:45:06.1: reg 0x10: [mem 0xd3103000-0xd31030ff]
[ 0.697464] pci 0000:45:06.1: supports D1 D2
[ 0.697465] pci 0000:45:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697511] pci 0000:45:06.2: [1180:0476] type 02 class 0x060700
[ 0.697531] pci 0000:45:06.2: reg 0x10: [mem 0xd3100000-0xd3100fff]
[ 0.697563] pci 0000:45:06.2: supports D1 D2
[ 0.697564] pci 0000:45:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.697637] pci 0000:00:1e.0: PCI bridge to [bus 45-46] (subtractive decode)
[ 0.697641] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.697645] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.697652] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.697654] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.697655] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.697657] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.697658] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[ 0.697660] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.697704] pci_bus 0000:46: busn_res: can not insert [bus 46-ff] under [bus 45-46] (conflicts with (null) [bus 45-46])
[ 0.697708] pci_bus 0000:46: busn_res: [bus 46-ff] end is updated to 49
[ 0.697710] pci_bus 0000:46: busn_res: can not insert [bus 46-49] under [bus 45-46] (conflicts with (null) [bus 45-46])
[ 0.697714] pci_bus 0000:46: [bus 46-49] partially hidden behind transparent bridge 0000:45 [bus 45-46]
[ 0.697717] pci 0000:00:1e.0: bridge has subordinate 46 but max busn 49
[ 0.697754] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.698611] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698656] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.698699] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698744] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.698788] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.698832] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.698875] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.698917] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.698957] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.698961] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.698964] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.699026] PCI host bridge to bus 0000:ff
[ 0.699028] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.699033] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.699076] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.699119] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.699156] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.699192] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.699229] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.699565] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.699603] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.699719] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.699722] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.699724] vgaarb: loaded
[ 0.699726] vgaarb: bridge control possible 0000:01:00.0
[ 0.699811] SCSI subsystem initialized
[ 0.699872] libata version 3.00 loaded.
[ 0.699902] ACPI: bus type USB registered
[ 0.699923] usbcore: registered new interface driver usbfs
[ 0.699931] usbcore: registered new interface driver hub
[ 0.699951] usbcore: registered new device driver usb
[ 0.700028] PCI: Using ACPI for IRQ routing
[ 0.709747] PCI: pci_cache_line_size set to 64 bytes
[ 0.709816] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.709818] e820: reserve RAM buffer [mem 0xbefc2000-0xbfffffff]
[ 0.709819] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.709930] NetLabel: Initializing
[ 0.709931] NetLabel: domain hash size = 128
[ 0.709932] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.709944] NetLabel: unlabeled traffic allowed by default
[ 0.710011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.710016] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.712054] Switched to clocksource hpet
[ 0.718224] pnp: PnP ACPI init
[ 0.718516] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.718519] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.718521] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 0.718523] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.718524] system 00:00: [mem 0xd7500000-0xd7500fff] has been reserved
[ 0.718526] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.718528] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.718529] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.718531] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.718535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718656] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.718727] system 00:02: [io 0x0200-0x027f] has been reserved
[ 0.718730] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.718731] system 00:02: [io 0xffff] has been reserved
[ 0.718733] system 00:02: [io 0xffff] has been reserved
[ 0.718735] system 00:02: [io 0x0400-0x047f] could not be reserved
[ 0.718736] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.718738] system 00:02: [io 0xef80-0xef9f] has been reserved
[ 0.718740] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718773] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.719114] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.719392] pnp 00:05: [dma 0 disabled]
[ 0.719452] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.719479] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.719506] pnp 00:07: Plug and Play ACPI device, IDs SYN0165 SYN0100 SYN0002 PNP0f13 (active)
[ 0.719867] pnp: PnP ACPI: found 8 devices
[ 0.726611] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.726639] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
[ 0.726666] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.726674] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726677] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.726679] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.726681] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.726684] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.726686] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.726689] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.726695] pci 0000:00:1c.0: bridge window [mem 0xd7300000-0xd73fffff]
[ 0.726704] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[ 0.726707] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.726713] pci 0000:00:1c.1: bridge window [mem 0xd3300000-0xd72fffff]
[ 0.726717] pci 0000:00:1c.1: bridge window [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726724] pci 0000:00:1c.3: PCI bridge to [bus 44]
[ 0.726730] pci 0000:00:1c.3: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.726741] pci 0000:45:06.2: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.726743] pci 0000:45:06.2: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.726744] pci 0000:45:06.2: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.726746] pci 0000:45:06.2: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.726749] pci 0000:45:06.2: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
[ 0.726751] pci 0000:45:06.2: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
[ 0.726753] pci 0000:45:06.2: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.726754] pci 0000:45:06.2: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.726756] pci 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 0.726758] pci 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 0.726762] pci 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 0.726767] pci 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 0.726771] pci 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.726776] pci 0000:00:1e.0: PCI bridge to [bus 45-46]
[ 0.726779] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.726784] pci 0000:00:1e.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.726795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.726796] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.726798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.726799] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.726801] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.726802] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.726804] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.726805] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.726807] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.726809] pci_bus 0000:02: resource 1 [mem 0xd7300000-0xd73fffff]
[ 0.726810] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
[ 0.726812] pci_bus 0000:03: resource 1 [mem 0xd3300000-0xd72fffff]
[ 0.726813] pci_bus 0000:03: resource 2 [mem 0xd7600000-0xd77fffff 64bit pref]
[ 0.726815] pci_bus 0000:44: resource 1 [mem 0xd3200000-0xd32fffff]
[ 0.726817] pci_bus 0000:45: resource 0 [io 0x2000-0x2fff]
[ 0.726818] pci_bus 0000:45: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.726820] pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7]
[ 0.726821] pci_bus 0000:45: resource 5 [io 0x0d00-0xffff]
[ 0.726822] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.726824] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff]
[ 0.726825] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.726827] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.726828] pci_bus 0000:46: resource 0 [io 0x2000-0x20ff]
[ 0.726830] pci_bus 0000:46: resource 1 [io 0x2400-0x24ff]
[ 0.726831] pci_bus 0000:46: resource 2 [mem 0xd8000000-0xdbffffff pref]
[ 0.726833] pci_bus 0000:46: resource 3 [mem 0xdc000000-0xdfffffff]
[ 0.726866] NET: Registered protocol family 2
[ 0.727105] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.727273] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.727460] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.727491] TCP: reno registered
[ 0.727503] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727536] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.727621] NET: Registered protocol family 1
[ 0.728300] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.728329] PCI: CLS 64 bytes, default 64
[ 0.728393] Unpacking initramfs...
[ 0.977662] Freeing initrd memory: 18492K (ffff880035bd3000 - ffff880036de2000)
[ 0.977695] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.977699] software IO TLB [mem 0xbafc2000-0xbefc2000] (64MB) mapped at [ffff8800bafc2000-ffff8800befc1fff]
[ 0.977992] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
[ 0.977998] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
[ 0.978004] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
[ 0.978011] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
[ 0.978094] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.978496] SSE version of gcm_enc/dec engaged.
[ 0.980805] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.981386] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.981417] Initialise system trusted keyring
[ 0.981437] audit: initializing netlink subsys (disabled)
[ 0.981460] audit: type=2000 audit(1414586534.852:1): initialized
[ 0.981789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.983099] zpool: loaded
[ 0.983261] VFS: Disk quotas dquot_6.5.2
[ 0.983297] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.983622] msgmni has been set to 15674
[ 0.983680] Key type big_key registered
[ 0.983683] SELinux: Registering netfilter hooks
[ 0.984757] alg: No test for stdrng (krng)
[ 0.984767] NET: Registered protocol family 38
[ 0.984773] Key type asymmetric registered
[ 0.984775] Asymmetric key parser 'x509' registered
[ 0.984812] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.984868] io scheduler noop registered
[ 0.984871] io scheduler deadline registered
[ 0.984903] io scheduler cfq registered (default)
[ 0.985214] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.985421] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.985645] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.985878] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.985980] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.985982] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.985984] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.985986] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.986006] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.986010] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.986029] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.986033] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.986051] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.986052] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
[ 0.986057] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.986071] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.986133] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.986164] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.986168] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.986214] intel_idle: MWAIT substates: 0x1120
[ 0.986215] intel_idle: v0.4 model 0x25
[ 0.986216] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.986541] ACPI: AC Adapter [AC] (on-line)
[ 0.986727] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.986731] ACPI: Sleep Button [SLPB]
[ 0.986766] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.986786] ACPI: Lid Switch [LID]
[ 0.986820] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.986822] ACPI: Power Button [PWRF]
[ 0.998114] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.998119] ACPI: Thermal Zone [EXTZ] (27 C)
[ 1.002245] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.002249] ACPI: Thermal Zone [EX2Z] (22 C)
[ 1.004432] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.004436] ACPI: Thermal Zone [PWMZ] (11 C)
[ 1.008538] thermal LNXTHERM:03: registered as thermal_zone3
[ 1.008542] ACPI: Thermal Zone [LOCZ] (21 C)
[ 1.009614] thermal LNXTHERM:04: registered as thermal_zone4
[ 1.009618] ACPI: Thermal Zone [GFXZ] (0 C)
[ 1.025903] thermal LNXTHERM:05: registered as thermal_zone5
[ 1.025905] ACPI: Thermal Zone [BATZ] (22 C)
[ 1.040551] thermal LNXTHERM:06: registered as thermal_zone6
[ 1.040553] ACPI: Thermal Zone [EGXZ] (31 C)
[ 1.040754] thermal LNXTHERM:07: registered as thermal_zone7
[ 1.040756] ACPI: Thermal Zone [CPUZ] (33 C)
[ 1.040916] thermal LNXTHERM:08: registered as thermal_zone8
[ 1.040917] ACPI: Thermal Zone [MCHZ] (30 C)
[ 1.041073] thermal LNXTHERM:09: registered as thermal_zone9
[ 1.041074] ACPI: Thermal Zone [PCHZ] (59 C)
[ 1.041130] GHES: HEST is not enabled!
[ 1.041318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.062272] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.084044] 0000:00:16.3: ttyS1 at I/O 0x6080 (irq = 17, base_baud = 115200) is a 16550A
[ 1.084981] Non-volatile memory driver v1.3
[ 1.084991] Linux agpgart interface v0.103
[ 1.085262] ata_piix 0000:00:1f.2: version 2.13
[ 1.085400] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.099375] ACPI: Battery Slot [BAT0] (battery present)
[ 1.099423] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.237204] scsi host0: ata_piix
[ 1.237688] scsi host1: ata_piix
[ 1.237778] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x6050 irq 14
[ 1.237787] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x6058 irq 15
[ 1.238011] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.238365] scsi host2: ata_piix
[ 1.238763] scsi host3: ata_piix
[ 1.238854] ata3: SATA max UDMA/133 cmd 0x6068 ctl 0x608c bmdma 0x6030 irq 21
[ 1.238861] ata4: SATA max UDMA/133 cmd 0x6060 ctl 0x6088 bmdma 0x6038 irq 21
[ 1.238958] libphy: Fixed MDIO Bus: probed
[ 1.239033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.239038] ehci-pci: EHCI PCI platform driver
[ 1.239251] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.239307] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.239323] ehci-pci 0000:00:1a.0: debug port 2
[ 1.243257] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.243276] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7428000
[ 1.249403] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.249486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.249490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.249493] usb usb1: Product: EHCI Host Controller
[ 1.249496] usb usb1: Manufacturer: Linux 3.17.1-304.fc21.x86_64 ehci_hcd
[ 1.249499] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.249783] hub 1-0:1.0: USB hub found
[ 1.249797] hub 1-0:1.0: 3 ports detected
[ 1.250415] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.250575] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.250596] ehci-pci 0000:00:1d.0: debug port 2
[ 1.254569] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.254600] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd7427000
[ 1.260238] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.260311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260319] usb usb2: Product: EHCI Host Controller
[ 1.260322] usb usb2: Manufacturer: Linux 3.17.1-304.fc21.x86_64 ehci_hcd
[ 1.260324] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.260641] hub 2-0:1.0: USB hub found
[ 1.260654] hub 2-0:1.0: 3 ports detected
[ 1.260894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.260904] ohci-pci: OHCI PCI platform driver
[ 1.260925] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.261014] usbcore: registered new interface driver usbserial
[ 1.261026] usbcore: registered new interface driver usbserial_generic
[ 1.261037] usbserial: USB Serial support registered for generic
[ 1.261093] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.262889] i8042: Detected active multiplexing controller, rev 1.1
[ 1.263588] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.263596] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.263646] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.263690] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.263734] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.264037] mousedev: PS/2 mouse device common for all mice
[ 1.264791] rtc_cmos 00:03: RTC can wake from S4
[ 1.265060] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.265102] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.265284] device-mapper: uevent: version 1.0.3
[ 1.265505] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.265788] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.265876] usbcore: registered new interface driver usbhid
[ 1.265877] usbhid: USB HID core driver
[ 1.265915] drop_monitor: Initializing network drop monitor service
[ 1.265985] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.266133] TCP: cubic registered
[ 1.266139] Initializing XFRM netlink socket
[ 1.266233] NET: Registered protocol family 10
[ 1.266523] mip6: Mobile IPv6
[ 1.266530] NET: Registered protocol family 17
[ 1.267501] Loading compiled-in X.509 certificates
[ 1.269721] Loaded X.509 cert 'Fedora kernel signing key: eb5eacdffcb83d1ca3e7dae0d998615af3153660'
[ 1.269751] registered taskstats version 1
[ 1.270658] Magic number: 2:162:735
[ 1.270845] rtc_cmos 00:03: setting system clock to 2014-10-29 12:42:16 UTC (1414586536)
[ 1.270987] PM: Hibernation image not present or could not be loaded.
[ 1.289237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.551173] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.557742] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.569403] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.665817] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.665822] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.666299] hub 1-1:1.0: USB hub found
[ 1.666428] hub 1-1:1.0: 6 ports detected
[ 1.770272] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.884851] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.884857] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.885309] hub 2-1:1.0: USB hub found
[ 1.885565] hub 2-1:1.0: 8 ports detected
[ 1.960493] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.979269] tsc: Refined TSC clocksource calibration: 2659.999 MHz
[ 1.998349] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.998369] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.018242] ata1.00: ATA-8: KINGSTON SV300S37A120G, 541ABBF0, max UDMA/133
[ 2.018248] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.038098] ata1.00: configured for UDMA/133
[ 2.038433] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 2.039035] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.039081] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.039248] sd 0:0:0:0: [sda] Write Protect is off
[ 2.039256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.039377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.039917] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=231d
[ 2.039922] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.039926] usb 1-1.1: Product: HP Integrated Module
[ 2.039929] usb 1-1.1: Manufacturer: Broadcom Corp
[ 2.040417] sda: sda1 sda2
[ 2.040950] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.113504] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.190395] usb 1-1.3: New USB device found, idVendor=138a, idProduct=0007
[ 2.190401] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.190405] usb 1-1.3: SerialNumber: 002040620189
[ 2.264515] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 2.282191] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 2.350050] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2514
[ 2.350055] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.350592] hub 1-1.4:1.0: USB hub found
[ 2.350733] hub 1-1.4:1.0: 4 ports detected
[ 2.425520] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[ 2.549294] ata2.01: failed to resume link (SControl 0)
[ 2.550309] usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b15e
[ 2.550314] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.550317] usb 1-1.5: Product: HP Webcam [2 MP Macro]
[ 2.550319] usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.626540] usb 2-1.4: new low-speed USB device number 3 using ehci-pci
[ 2.700433] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.700459] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.700477] ata2.01: link offline, clearing class 3 to NONE
[ 2.707671] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c51b
[ 2.707676] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.707680] usb 2-1.4: Product: USB Receiver
[ 2.707682] usb 2-1.4: Manufacturer: Logitech
[ 2.713673] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C51B.0001/input/input12
[ 2.713886] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input0
[ 2.716569] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.4/input1
[ 2.719567] ata2.00: ATAPI: hp DVD RW AD-7586H, KH04, max UDMA/100
[ 2.741605] ata2.00: configured for UDMA/100
[ 2.748295] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7586H KH04 PQ: 0 ANSI: 5
[ 2.783393] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.783398] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.783671] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.783820] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.786477] Freeing unused kernel memory: 1468K (ffffffff81d35000 - ffffffff81ea4000)
[ 2.786481] Write protecting the kernel read-only data: 12288k
[ 2.790168] Freeing unused kernel memory: 716K (ffff88000174d000 - ffff880001800000)
[ 2.794078] Freeing unused kernel memory: 844K (ffff880001b2d000 - ffff880001c00000)
[ 2.797513] random: systemd urandom read with 28 bits of entropy available
[ 2.979408] Switched to clocksource tsc
[ 3.078573] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 3.093557] acpi device:03: registered as cooling_device4
[ 3.093645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input13
[ 3.095332] wmi: Mapper loaded
[ 3.101669] pps_core: LinuxPPS API ver. 1 registered
[ 3.101672] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.103595] PTP clock support registered
[ 3.119780] yenta_cardbus 0000:45:06.2: CardBus bridge found [103c:172b]
[ 3.126997] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.127002] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.127632] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.127662] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 3.133114] [drm] Initialized drm 1.1.0 20060810
[ 3.165665] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 598102
[ 3.219614] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 3.241328] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8600b1
[ 3.241333] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 3.241335] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 3.241375] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.242520] yenta_cardbus 0000:45:06.2: ISA IRQ mask 0x0cb8, PCI irq 22
[ 3.242525] yenta_cardbus 0000:45:06.2: Socket status: 30000810
[ 3.242528] pci_bus 0000:45: Raising subordinate bus# of parent bus (#45) from #46 to #49
[ 3.242538] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 3.242541] yenta_cardbus 0000:45:06.2: pcmcia: parent PCI bridge window: [mem 0xd3100000-0xd31fffff]
[ 3.242544] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3100000-0xd31fffff:
[ 3.242552] excluding 0xd3100000-0xd310ffff
[ 3.245923] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 3.245932] excluding 0xc0000-0xfffff
[ 3.245960] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 3.245965] excluding 0xa0000000-0xa0ffffff
[ 3.245993] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 3.245999] excluding 0x60000000-0x60ffffff
[ 3.294362] firewire_ohci 0000:45:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 3.295528] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:f0:d7:67
[ 3.295531] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.295632] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
[ 3.296562] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 3.317098] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.317104] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.317331] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.317336] nouveau [ VBIOS][0000:01:00.0] version 70.18.49.01.0c
[ 3.318182] nouveau 0000:01:00.0: irq 29 for MSI/MSI-X
[ 3.318197] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 3.318241] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 3.318244] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 3.318248] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 3.322090] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 3.350175] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 3.350192] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 3.350197] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.350251] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 3.350258] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.350264] nouveau [ CLK][0000:01:00.0] 0f: core 606 MHz shader 1468 MHz memory 790 MHz
[ 3.350294] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 3.350710] [TTM] Zone kernel: Available graphics memory: 4014244 kiB
[ 3.350714] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.350716] [TTM] Initializing pool allocator
[ 3.350726] [TTM] Initializing DMA pool allocator
[ 3.350748] nouveau [ DRM] VRAM: 512 MiB
[ 3.350751] nouveau [ DRM] GART: 1048576 MiB
[ 3.350758] nouveau [ DRM] TMDS table version 2.0
[ 3.350761] nouveau [ DRM] DCB version 4.0
[ 3.350765] nouveau [ DRM] DCB outp 00: 048003b6 0f200014
[ 3.350769] nouveau [ DRM] DCB outp 01: 02011300 00000000
[ 3.350773] nouveau [ DRM] DCB outp 02: 028223a6 0f220010
[ 3.350776] nouveau [ DRM] DCB outp 03: 02022362 00020010
[ 3.350779] nouveau [ DRM] DCB outp 04: 088333c6 0f220010
[ 3.350782] nouveau [ DRM] DCB outp 05: 08033382 00020010
[ 3.350785] nouveau [ DRM] DCB conn 00: 00002047
[ 3.350789] nouveau [ DRM] DCB conn 01: 00000100
[ 3.350792] nouveau [ DRM] DCB conn 02: 00101246
[ 3.350795] nouveau [ DRM] DCB conn 03: 00210346
[ 3.392297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.392299] [drm] Driver supports precise vblank timestamp query.
[ 3.425266] nouveau [ DRM] MM: using COPY for buffer copies
[ 3.709309] nouveau [ DRM] allocated 1366x768 fb: 0x70000, bo ffff88022d990400
[ 3.709471] fbcon: nouveaufb (fb0) is primary device
[ 3.795422] firewire_core 0000:45:06.0: created device fw0: GUID 5566778811223344, S400
[ 3.990794] Console: switching to colour frame buffer device 170x48
[ 3.992417] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 3.992419] nouveau 0000:01:00.0: registered panic notifier
[ 3.995550] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 0
[ 4.117579] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 4.117586] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3110000-0xd31fffff:
[ 4.125569] excluding 0xd31fe000-0xd320bfff
[ 4.125774] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
[ 4.171733] scsi host4: pata_pcmcia
[ 4.171868] ata5: PATA max PIO0 cmd 0x2100 ctl 0x210e irq 22
[ 4.341706] PM: Starting manual resume from disk
[ 4.341713] PM: Hibernation image partition 253:1 present
[ 4.341714] PM: Looking for hibernation image.
[ 4.343453] PM: Image not found (code -22)
[ 4.343457] PM: Hibernation image not present or could not be loaded.
[ 4.364746] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.685892] systemd-journald[149]: Received SIGTERM from PID 1 (systemd).
[ 4.686178] random: nonblocking pool is initialized
[ 4.778516] audit: type=1404 audit(1414586540.006:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 4.816172] SELinux: 2048 avtab hash slots, 103119 rules.
[ 4.853845] SELinux: 2048 avtab hash slots, 103119 rules.
[ 4.910092] SELinux: 8 users, 102 roles, 4962 types, 294 bools, 1 sens, 1024 cats
[ 4.910100] SELinux: 83 classes, 103119 rules
[ 4.919395] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 4.919407] SELinux: the above unknown classes and permissions will be allowed
[ 4.919419] SELinux: Completing initialization.
[ 4.919420] SELinux: Setting up existing superblocks.
[ 4.919432] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 4.919449] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 4.919459] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4.919579] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.919615] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 4.920691] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 4.922015] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 4.922023] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 4.922032] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 4.922037] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 4.922042] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 4.922075] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 4.922090] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 4.922107] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 4.922125] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 4.922712] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 4.922717] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922728] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922878] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.922938] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922947] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.922951] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922954] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922958] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922970] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922976] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922979] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922983] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922993] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.922996] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.923002] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 4.923006] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 4.923019] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 4.931178] audit: type=1403 audit(1414586540.158:3): policy loaded auid=4294967295 ses=4294967295
[ 4.939447] systemd[1]: Successfully loaded SELinux policy in 164.916ms.
[ 4.998508] systemd[1]: Relabelled /dev and /run in 38.279ms.
[ 5.228824] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 5.247239] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.247487] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.304747] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.551759] hp_accel: hardware type HPB64xx found
[ 5.552354] lis3lv02d: 8 bits sensor found
[ 5.578096] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[ 5.578105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578110] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578114] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578115] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578120] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[ 5.578124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.578125] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.593281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.603777] mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
[ 5.606439] parport_pc 00:05: reported by Plug and Play ACPI
[ 5.606555] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 5.606595] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[ 5.654908] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 5.655234] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 5.660021] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 5.660627] sdhci: Secure Digital Host Controller Interface driver
[ 5.660629] sdhci: Copyright(c) Pierre Ossman
[ 5.661139] cfg80211: Calling CRDA to update world regulatory domain
[ 5.664015] sdhci-pci 0000:45:06.1: SDHCI controller found [1180:0822] (rev 25)
[ 5.665160] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.665173] sdhci-pci 0000:45:06.1: No vmmc regulator found
[ 5.665175] sdhci-pci 0000:45:06.1: No vqmmc regulator found
[ 5.666182] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5.668178] mmc0: SDHCI controller on PCI [0000:45:06.1] using DMA
[ 5.674347] WARNING! power/level is deprecated; use power/control instead
[ 5.695554] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 5.696639] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.696650] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.719539] Bluetooth: Core ver 2.19
[ 5.719575] NET: Registered protocol family 31
[ 5.719577] Bluetooth: HCI device and connection manager initialized
[ 5.719587] Bluetooth: HCI socket layer initialized
[ 5.719590] Bluetooth: L2CAP socket layer initialized
[ 5.719598] Bluetooth: SCO socket layer initialized
[ 5.719950] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 5.719960] excluding 0xc0000-0xfffff
[ 5.720005] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 5.720012] excluding 0xa0000000-0xa0ffffff
[ 5.720059] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 5.720067] excluding 0x60000000-0x60ffffff
[ 5.723524] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 5.723528] Copyright(c) 2003- 2014 Intel Corporation
[ 5.724642] iwlwifi 0000:44:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.724723] iwlwifi 0000:44:00.0: irq 32 for MSI/MSI-X
[ 5.728315] iwlwifi 0000:44:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 5.728336] iwlwifi 0000:44:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 5.734139] iwlwifi 0000:44:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 5.740568] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 5.740574] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.740576] sound hdaudioC0D0: hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[ 5.740578] sound hdaudioC0D0: mono: mono_out=0x0
[ 5.740580] sound hdaudioC0D0: inputs:
[ 5.740583] sound hdaudioC0D0: Internal Mic=0xc
[ 5.740585] sound hdaudioC0D0: Mic=0xb
[ 5.740587] sound hdaudioC0D0: Line=0xe
[ 5.768320] usbcore: registered new interface driver btusb
[ 5.770519] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.770740] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.770847] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.770952] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.786826] media: Linux media interface: v0.10
[ 5.810121] Linux video capture interface: v2.00
[ 5.817159] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 5.817163] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 5.817165] iwlwifi 0000:44:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 5.817167] iwlwifi 0000:44:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 5.817228] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 5.846820] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.858474] uvcvideo: Found UVC 1.00 device HP Webcam [2 MP Macro] (04f2:b15e)
[ 5.865895] iTCO_vendor_support: vendor-support=0
[ 5.867994] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.868039] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 5.868296] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.870104] ppdev: user-space parallel port driver
[ 5.897532] input: HP Webcam [2 MP Macro] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input20
[ 5.898593] usbcore: registered new interface driver uvcvideo
[ 5.898597] USB Video Class driver (1.1.1)
[ 5.905051] iwlwifi 0000:44:00.0 wlo1: renamed from wlan0
[ 5.915310] alg: No test for crc32 (crc32-pclmul)
[ 5.945194] cfg80211: World regulatory domain updated:
[ 5.945198] cfg80211: DFS Master region: unset
[ 5.945200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.945203] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945205] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945207] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945208] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945211] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5.945213] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5.945215] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 5.945217] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 5.961213] cfg80211: Calling CRDA for country: US
[ 5.979697] cfg80211: Regulatory domain changed to country: US
[ 5.979702] cfg80211: DFS Master region: FCC
[ 5.979703] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5.979707] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 5.979709] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 5.979711] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 5.979713] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 5.979715] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6.021211] kvm: disabled by bios
[ 6.026817] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 6.026952] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[ 6.027073] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[ 6.027187] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[ 6.039686] Adding 8126460k swap on /dev/mapper/fedora_patuxant-swap. Priority:-1 extents:1 across:8126460k SSFS
[ 6.050184] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 6.085330] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.085529] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 6.088641] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.088653] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 6.154815] audit: type=1305 audit(1414586541.382:4): audit_pid=740 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 6.343259] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.343263] Bluetooth: BNEP filters: protocol multicast
[ 6.343274] Bluetooth: BNEP socket layer initialized
[ 6.427867] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.696088] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.717706] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.117689] Ebtables v2.0 registered
[ 7.177829] Bridge firewalling registered
[ 7.778869] systemd-journald[528]: Received request to flush runtime journal from PID 1
[ 7.928686] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 8.028827] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[ 8.028941] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.045026] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 8.045174] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 8.257414] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 8.257570] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 8.319415] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 9.224518] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 9.463082] tun: Universal TUN/TAP device driver, 1.6
[ 9.463086] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 9.506587] device virbr0-nic entered promiscuous mode
[ 9.517144] virbr0: port 1(virbr0-nic) entered forwarding state
[ 9.517157] virbr0: port 1(virbr0-nic) entered forwarding state
[ 9.784988] virbr0: port 1(virbr0-nic) entered disabled state
[ 11.457212] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 12.178021] wlo1: authenticate with 28:c6:8e:82:18:b4
[ 12.198836] wlo1: send auth to 28:c6:8e:82:18:b4 (try 1/3)
[ 12.201555] wlo1: authenticated
[ 12.202237] wlo1: associate with 28:c6:8e:82:18:b4 (try 1/3)
[ 12.206112] wlo1: RX AssocResp from 28:c6:8e:82:18:b4 (capab=0x411 status=0 aid=2)
[ 12.208136] wlo1: associated
[ 12.208174] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 27.207408] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 28.023213] fuse init (API version 7.23)
[ 28.027417] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 28.052386] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 180.879312] wlo1: deauthenticating from 28:c6:8e:82:18:b4 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 180.885726] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 180.890271] cfg80211: Calling CRDA to update world regulatory domain
[ 180.890706] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 180.899825] cfg80211: World regulatory domain updated:
[ 180.899831] cfg80211: DFS Master region: unset
[ 180.899833] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.899836] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899838] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899840] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899842] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899844] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 180.899846] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 180.899848] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.899850] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 180.899872] cfg80211: Calling CRDA for country: US
[ 180.937221] cfg80211: Regulatory domain changed to country: US
[ 180.937226] cfg80211: DFS Master region: FCC
[ 180.937227] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.937230] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 180.937232] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 180.937234] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 180.937236] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 180.937238] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 181.900331] PM: Syncing filesystems ... done.
[ 181.982411] PM: Preparing system for mem sleep
[ 182.246130] Freezing user space processes ... (elapsed 0.015 seconds) done.
[ 182.261383] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 182.262331] PM: Entering mem sleep
[ 182.262481] Suspending console(s) (use no_console_suspend to debug)
[ 182.263349] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 182.264362] sd 0:0:0:0: [sda] Stopping disk
[ 182.317979] parport_pc 00:05: disabled
[ 182.318355] serial 00:04: disabled
[ 182.318431] nouveau [ DRM] suspending console...
[ 182.318443] nouveau [ DRM] suspending display...
[ 182.318530] nouveau [ DRM] evicting buffers...
[ 182.318719] e1000e: EEE TX LPI TIMER: 00000000
[ 183.179658] nouveau [ DRM] waiting for kernel channels to go idle...
[ 183.179683] nouveau [ DRM] suspending client object trees...
[ 183.180287] nouveau [ DRM] suspending kernel object tree...
[ 185.302704] PM: suspend of devices complete after 3039.734 msecs
[ 185.303545] PM: late suspend of devices complete after 0.836 msecs
[ 185.304101] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 185.304224] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 185.304230] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 185.314543] PM: noirq suspend of devices complete after 10.996 msecs
[ 185.314832] ACPI: Preparing to enter system sleep state S3
[ 185.319343] PM: Saving platform NVS memory
[ 185.320039] Disabling non-boot CPUs ...
[ 185.321667] smpboot: CPU 1 is now offline
[ 185.323577] smpboot: CPU 2 is now offline
[ 185.325321] smpboot: CPU 3 is now offline
[ 185.326628] ACPI: Low-level resume complete
[ 185.326675] PM: Restoring platform NVS memory
[ 185.327308] Enabling non-boot CPUs ...
[ 185.327360] x86: Booting SMP configuration:
[ 185.327361] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 185.337770] CPU1 microcode updated early to revision 0x4, date = 2013-06-28
[ 185.341015] CPU1 is up
[ 185.341038] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 185.351423] CPU2 microcode updated early to revision 0x4, date = 2013-06-28
[ 185.354652] CPU2 is up
[ 185.354676] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 185.368348] CPU3 is up
[ 185.370699] ACPI: Waking up from system sleep state S3
[ 185.408010] acpi LNXPOWER:02: Turning OFF
[ 185.408047] acpi LNXPOWER:01: Turning OFF
[ 185.408657] yenta_cardbus 0000:45:06.2: enabling device (0006 -> 0007)
[ 185.418947] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 185.418958] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 185.419098] firewire_ohci 0000:45:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 185.419099] firewire_ohci 0000:45:06.0: MMC cards are now supported by standard SDHCI controller
[ 185.428879] PM: noirq resume of devices complete after 20.798 msecs
[ 185.429288] PM: early resume of devices complete after 0.367 msecs
[ 185.429377] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[ 185.429389] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 185.432587] nouveau [ DRM] re-enabling device...
[ 185.432597] nouveau [ DRM] resuming kernel object tree...
[ 185.432618] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 185.432619] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 185.433672] sdhci-pci 0000:45:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 185.437501] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 185.439892] sd 0:0:0:0: [sda] Starting disk
[ 185.472546] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 185.473344] serial 00:04: activated
[ 185.474211] parport_pc 00:05: activated
[ 185.513438] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 185.643988] usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
[ 185.741766] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 185.741771] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 185.741814] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 185.743183] nouveau [ DRM] resuming client object trees...
[ 185.743710] nouveau [ DRM] resuming display...
[ 185.748919] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link training failed
[ 185.754605] ata3: SATA link down (SStatus 0 SControl 300)
[ 185.755020] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link training failed
[ 185.756025] nouveau E[ PDISP][0000:01:00.0] 00:0006:0344: link not trained before attach
[ 185.766599] ata4: SATA link down (SStatus 0 SControl 300)
[ 185.855005] usb 1-1.5: reset high-speed USB device number 6 using ehci-pci
[ 186.006305] nouveau [ DRM] resuming console...
[ 186.022871] firewire_core 0000:45:06.0: rediscovered device fw0
[ 186.145779] PM: resume of devices complete after 716.438 msecs
[ 186.146572] PM: Finishing wakeup.
[ 186.146574] Restarting tasks ...
[ 186.146973] yenta_cardbus 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 186.146978] yenta_cardbus 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 186.146984] yenta_cardbus 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 186.146990] yenta_cardbus 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 186.146995] yenta_cardbus 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 186.154386] done.
[ 186.158626] yenta_cardbus 0000:45:06.2: CardBus bridge to [bus 46-49]
[ 186.158631] yenta_cardbus 0000:45:06.2: bridge window [io 0x2000-0x20ff]
[ 186.158638] yenta_cardbus 0000:45:06.2: bridge window [io 0x2400-0x24ff]
[ 186.158644] yenta_cardbus 0000:45:06.2: bridge window [mem 0xd8000000-0xdbffffff pref]
[ 186.158649] yenta_cardbus 0000:45:06.2: bridge window [mem 0xdc000000-0xdfffffff]
[ 186.205918] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 186.205939] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 186.209175] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 186.209180] ata1.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
[ 186.229717] ata1.00: configured for UDMA/133
[ 186.237956] video LNXVIDEO:00: Restoring backlight state
[ 186.588643] e1000e: enp0s25 NIC Link is Down
[ 186.603108] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 186.707701] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 186.754891] ata2.01: failed to resume link (SControl 0)
[ 186.807928] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 186.808063] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 186.822817] iwlwifi 0000:44:00.0: L1 Disabled; Enabling L0S
[ 186.822964] iwlwifi 0000:44:00.0: Radio type=0x1-0x3-0x1
[ 186.893917] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 186.905967] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 186.905990] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 186.906007] ata2.01: link offline, clearing class 3 to NONE
[ 186.925104] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 186.925110] ata2.00: ACPI cmd ef/03:41:00:00:00:a0 (SET FEATURES) filtered out
[ 186.947254] ata2.00: configured for UDMA/100
[ 190.317831] wlo1: authenticate with 28:c6:8e:82:18:b4
[ 190.320659] wlo1: send auth to 28:c6:8e:82:18:b4 (try 1/3)
[ 190.323416] wlo1: authenticated
[ 190.324107] wlo1: associate with 28:c6:8e:82:18:b4 (try 1/3)
[ 190.327951] wlo1: RX AssocResp from 28:c6:8e:82:18:b4 (capab=0x411 status=0 aid=2)
[ 190.330327] wlo1: associated
[ 190.330362] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 7+ messages in thread