* [Qemu-devel] [PATCH v2 RESEND 1/4] qmp: Add command 'blockdev-backup'
2014-11-03 1:47 [Qemu-devel] [PATCH v2 RESEND 0/4] qmp: Add "blockdev-backup" Fam Zheng
@ 2014-11-03 1:47 ` Fam Zheng
2014-11-04 16:05 ` Eric Blake
2014-11-03 1:47 ` [Qemu-devel] [PATCH v2 RESEND 2/4] block: Add blockdev-backup to transaction Fam Zheng
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Fam Zheng @ 2014-11-03 1:47 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, pbonzini, Markus Armbruster, Stefan Hajnoczi
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block/backup.c | 28 +++++++++++++++++++++++++++
blockdev.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++
qapi/block-core.json | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++
qmp-commands.hx | 44 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 172 insertions(+)
diff --git a/block/backup.c b/block/backup.c
index e334740..31d1da6 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -344,6 +344,7 @@ static void coroutine_fn backup_run(void *opaque)
hbitmap_free(job->bitmap);
bdrv_iostatus_disable(target);
+ bdrv_op_unblock_all(target, job->common.blocker);
bdrv_unref(target);
block_job_completed(&job->common, ret);
@@ -362,6 +363,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
assert(target);
assert(cb);
+ if (bs == target) {
+ error_setg(errp, "Source and target cannot be the same");
+ return;
+ }
+
if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
!bdrv_iostatus_is_enabled(bs)) {
@@ -369,6 +375,26 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
return;
}
+ if (!bdrv_is_inserted(bs)) {
+ error_setg(errp, "Devie is not inserted: %s",
+ bdrv_get_device_name(bs));
+ return;
+ }
+
+ if (!bdrv_is_inserted(target)) {
+ error_setg(errp, "Devie is not inserted: %s",
+ bdrv_get_device_name(target));
+ return;
+ }
+
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
+ return;
+ }
+
+ if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
+ return;
+ }
+
len = bdrv_getlength(bs);
if (len < 0) {
error_setg_errno(errp, -len, "unable to get length for '%s'",
@@ -382,6 +408,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
return;
}
+ bdrv_op_block_all(target, job->common.blocker);
+
job->on_source_error = on_source_error;
job->on_target_error = on_target_error;
job->target = target;
diff --git a/blockdev.c b/blockdev.c
index eb743a9..5cbf93e 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -2121,6 +2121,8 @@ void qmp_drive_backup(const char *device, const char *target,
return;
}
+ /* Although backup_run has this check too, we need to use bs->drv below, so
+ * do an early check redundantly. */
if (!bdrv_is_inserted(bs)) {
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
return;
@@ -2137,6 +2139,7 @@ void qmp_drive_backup(const char *device, const char *target,
}
}
+ /* Early check to avoid creating target */
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
return;
}
@@ -2199,6 +2202,50 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
return bdrv_named_nodes_list();
}
+void qmp_blockdev_backup(const char *device, const char *target,
+ enum MirrorSyncMode sync,
+ bool has_speed, int64_t speed,
+ bool has_on_source_error,
+ BlockdevOnError on_source_error,
+ bool has_on_target_error,
+ BlockdevOnError on_target_error,
+ Error **errp)
+{
+ BlockDriverState *bs;
+ BlockDriverState *target_bs;
+ Error *local_err = NULL;
+
+ if (!has_speed) {
+ speed = 0;
+ }
+ if (!has_on_source_error) {
+ on_source_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+ if (!has_on_target_error) {
+ on_target_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+
+ bs = bdrv_find(device);
+ if (!bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
+ }
+
+ target_bs = bdrv_find(target);
+ if (!target_bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, target);
+ return;
+ }
+
+ bdrv_ref(target_bs);
+ backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
+ block_job_cb, bs, &local_err);
+ if (local_err != NULL) {
+ bdrv_unref(target_bs);
+ error_propagate(errp, local_err);
+ }
+}
+
#define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
void qmp_drive_mirror(const char *device, const char *target,
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 8f7089e..838b7d6 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -674,6 +674,40 @@
'*on-target-error': 'BlockdevOnError' } }
##
+# @BlockdevBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the name of the backup target device.
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @speed: #optional the maximum speed, in bytes per second.
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 2.2
+##
+{ 'type': 'BlockdevBackup',
+ 'data': { 'device': 'str', 'target': 'str',
+ 'sync': 'MirrorSyncMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
# @blockdev-snapshot-sync
#
# Generates a synchronous snapshot of a block device.
@@ -793,6 +827,25 @@
{ 'command': 'drive-backup', 'data': 'DriveBackup' }
##
+# @blockdev-backup
+#
+# Start a point-in-time copy of a block device to a new destination. The
+# status of ongoing blockdev-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
+# The operation can be stopped before it has completed using the
+# block-job-cancel command.
+#
+# For the arguments, see the documentation of BlockdevBackup.
+#
+# Returns: Nothing on success.
+# If @device or @target is not a valid block device, DeviceNotFound.
+#
+# Since 2.3
+##
+{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
+
+
+##
# @query-named-block-nodes
#
# Get the named block driver list
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 1abd619..bf43da6 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -1094,6 +1094,50 @@ Example:
"sync": "full",
"target": "backup.img" } }
<- { "return": {} }
+
+EQMP
+
+ {
+ .name = "blockdev-backup",
+ .args_type = "sync:s,device:B,target:B,speed:i?,"
+ "on-source-error:s?,on-target-error:s?",
+ .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
+ },
+
+SQMP
+blockdev-backup
+------------
+
+The device version of drive-backup: this command takes a existing named device
+as backup target.
+
+Arguments:
+
+- "device": the name of the device which should be copied.
+ (json-string)
+- "target": the target of the new image. If the file exists, or if it is a
+ device, the existing file/device will be used as the new
+ destination. If it does not exist, a new file will be created.
+ (json-string)
+- "sync": what parts of the disk image should be copied to the destination;
+ possibilities include "full" for all the disk, "top" for only the
+ sectors allocated in the topmost image, or "none" to only replicate
+ new I/O (MirrorSyncMode).
+- "speed": the maximum speed, in bytes per second (json-int, optional)
+- "on-source-error": the action to take on an error on the source, default
+ 'report'. 'stop' and 'enospc' can only be used
+ if the block device supports io-status.
+ (BlockdevOnError, optional)
+- "on-target-error": the action to take on an error on the target, default
+ 'report' (no limitations, since this applies to
+ a different block device than device).
+ (BlockdevOnError, optional)
+
+Example:
+-> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
+ "target": "tgt-id" } }
+<- { "return": {} }
+
EQMP
{
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Qemu-devel] [PATCH v2 RESEND 4/4] qemu-iotests: Test blockdev-backup in 055
2014-11-03 1:47 [Qemu-devel] [PATCH v2 RESEND 0/4] qmp: Add "blockdev-backup" Fam Zheng
` (2 preceding siblings ...)
2014-11-03 1:47 ` [Qemu-devel] [PATCH v2 RESEND 3/4] qapi-schema: Add version info for transaction types Fam Zheng
@ 2014-11-03 1:47 ` Fam Zheng
3 siblings, 0 replies; 8+ messages in thread
From: Fam Zheng @ 2014-11-03 1:47 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, pbonzini, Markus Armbruster, Stefan Hajnoczi
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
tests/qemu-iotests/055 | 211 +++++++++++++++++++++++++++++++++++++--------
tests/qemu-iotests/055.out | 4 +-
2 files changed, 176 insertions(+), 39 deletions(-)
diff --git a/tests/qemu-iotests/055 b/tests/qemu-iotests/055
index 451b67d..d04dad5 100755
--- a/tests/qemu-iotests/055
+++ b/tests/qemu-iotests/055
@@ -1,8 +1,8 @@
#!/usr/bin/env python
#
-# Tests for drive-backup
+# Tests for drive-backup and blockdev-backup
#
-# Copyright (C) 2013 Red Hat, Inc.
+# Copyright (C) 2013, 2014 Red Hat, Inc.
#
# Based on 041.
#
@@ -27,6 +27,7 @@ from iotests import qemu_img, qemu_io
test_img = os.path.join(iotests.test_dir, 'test.img')
target_img = os.path.join(iotests.test_dir, 'target.img')
+blockdev_target_img = os.path.join(iotests.test_dir, 'blockdev-target.img')
class TestSingleDrive(iotests.QMPTestCase):
image_len = 64 * 1024 * 1024 # MB
@@ -38,34 +39,41 @@ class TestSingleDrive(iotests.QMPTestCase):
qemu_io('-c', 'write -P0xd5 1M 32k', test_img)
qemu_io('-c', 'write -P0xdc 32M 124k', test_img)
qemu_io('-c', 'write -P0xdc 67043328 64k', test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
- self.vm = iotests.VM().add_drive(test_img)
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
+ os.remove(blockdev_target_img)
try:
os.remove(target_img)
except OSError:
pass
- def test_cancel(self):
+ def do_test_cancel(self, cmd, target):
self.assert_no_active_block_jobs()
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ result = self.vm.qmp(cmd, device='drive0', target=target, sync='full')
self.assert_qmp(result, 'return', {})
event = self.cancel_and_wait()
self.assert_qmp(event, 'data/type', 'backup')
- def test_pause(self):
+ def test_cancel_drive_backup(self):
+ self.do_test_cancel('drive-backup', target_img)
+
+ def test_cancel_blockdev_backup(self):
+ self.do_test_cancel('blockdev-backup', 'drive1')
+
+ def do_test_pause(self, cmd, target, image):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ result = self.vm.qmp(cmd, device='drive0',
+ target=target, sync='full')
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('block-job-pause', device='drive0')
@@ -86,14 +94,25 @@ class TestSingleDrive(iotests.QMPTestCase):
self.wait_until_completed()
self.vm.shutdown()
- self.assertTrue(iotests.compare_images(test_img, target_img),
+ self.assertTrue(iotests.compare_images(test_img, image),
'target image does not match source after backup')
+ def test_pause_drive_backup(self):
+ self.do_test_pause('drive-backup', target_img, target_img)
+
+ def test_pause_blockdev_backup(self):
+ self.do_test_pause('blockdev-backup', 'drive1', blockdev_target_img)
+
def test_medium_not_found(self):
result = self.vm.qmp('drive-backup', device='ide1-cd0',
target=target_img, sync='full')
self.assert_qmp(result, 'error/class', 'GenericError')
+ def test_medium_not_found_blockdev_backup(self):
+ result = self.vm.qmp('blockdev-backup', device='ide1-cd0',
+ target='drive1', sync='full')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
def test_image_not_found(self):
result = self.vm.qmp('drive-backup', device='drive0',
target=target_img, sync='full', mode='existing')
@@ -105,31 +124,53 @@ class TestSingleDrive(iotests.QMPTestCase):
format='spaghetti-noodles')
self.assert_qmp(result, 'error/class', 'GenericError')
- def test_device_not_found(self):
- result = self.vm.qmp('drive-backup', device='nonexistent',
- target=target_img, sync='full')
+ def do_test_device_not_found(self, cmd, **args):
+ result = self.vm.qmp(cmd, **args)
self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+ def test_device_not_found(self):
+ self.do_test_device_not_found('drive-backup', device='nonexistent',
+ target=target_img, sync='full')
+
+ self.do_test_device_not_found('blockdev-backup', device='nonexistent',
+ target='drive0', sync='full')
+
+ self.do_test_device_not_found('blockdev-backup', device='drive0',
+ target='nonexistent', sync='full')
+
+ self.do_test_device_not_found('blockdev-backup', device='nonexistent',
+ target='nonexistent', sync='full')
+
+ def test_target_is_source(self):
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive0', sync='full')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
class TestSetSpeed(iotests.QMPTestCase):
image_len = 80 * 1024 * 1024 # MB
def setUp(self):
qemu_img('create', '-f', iotests.imgfmt, test_img, str(TestSetSpeed.image_len))
qemu_io('-c', 'write -P1 0 512', test_img)
- self.vm = iotests.VM().add_drive(test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
+
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
- os.remove(target_img)
+ os.remove(blockdev_target_img)
+ try:
+ os.remove(target_img)
+ except OSError:
+ pass
- def test_set_speed(self):
+ def do_test_set_speed(self, cmd, target):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ result = self.vm.qmp(cmd, device='drive0', target=target, sync='full')
self.assert_qmp(result, 'return', {})
# Default speed is 0
@@ -148,10 +189,10 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
- # Check setting speed in drive-backup works
+ # Check setting speed option works
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full', speed=4*1024*1024)
+ result = self.vm.qmp(cmd, device='drive0',
+ target=target, sync='full', speed=4*1024*1024)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block-jobs')
@@ -161,18 +202,24 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
- def test_set_speed_invalid(self):
+ def test_set_speed_drive_backup(self):
+ self.do_test_set_speed('drive-backup', target_img)
+
+ def test_set_speed_blockdev_backup(self):
+ self.do_test_set_speed('blockdev-backup', 'drive1')
+
+ def do_test_set_speed_invalid(self, cmd, target):
self.assert_no_active_block_jobs()
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full', speed=-1)
+ result = self.vm.qmp(cmd, device='drive0',
+ target=target, sync='full', speed=-1)
self.assert_qmp(result, 'error/class', 'GenericError')
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ result = self.vm.qmp(cmd, device='drive0',
+ target=target, sync='full')
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('block-job-set-speed', device='drive0', speed=-1)
@@ -181,6 +228,12 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
+ def test_set_speed_invalid_drive_backup(self):
+ self.do_test_set_speed_invalid('drive-backup', target_img)
+
+ def test_set_speed_invalid_blockdev_backup(self):
+ self.do_test_set_speed_invalid('blockdev-backup', 'drive1')
+
class TestSingleTransaction(iotests.QMPTestCase):
image_len = 64 * 1024 * 1024 # MB
@@ -190,41 +243,50 @@ class TestSingleTransaction(iotests.QMPTestCase):
qemu_io('-c', 'write -P0xd5 1M 32k', test_img)
qemu_io('-c', 'write -P0xdc 32M 124k', test_img)
qemu_io('-c', 'write -P0xdc 67043328 64k', test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
- self.vm = iotests.VM().add_drive(test_img)
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
+ os.remove(blockdev_target_img)
try:
os.remove(target_img)
except OSError:
pass
- def test_cancel(self):
+ def do_test_cancel(self, cmd, target):
self.assert_no_active_block_jobs()
result = self.vm.qmp('transaction', actions=[{
- 'type': 'drive-backup',
+ 'type': cmd,
'data': { 'device': 'drive0',
- 'target': target_img,
+ 'target': target,
'sync': 'full' },
}
])
+
self.assert_qmp(result, 'return', {})
event = self.cancel_and_wait()
self.assert_qmp(event, 'data/type', 'backup')
- def test_pause(self):
+ def test_cancel_drive_backup(self):
+ self.do_test_cancel('drive-backup', target_img)
+
+ def test_cancel_blockdev_backup(self):
+ self.do_test_cancel('blockdev-backup', 'drive1')
+
+ def do_test_pause(self, cmd, target, image):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
result = self.vm.qmp('transaction', actions=[{
- 'type': 'drive-backup',
+ 'type': cmd,
'data': { 'device': 'drive0',
- 'target': target_img,
+ 'target': target,
'sync': 'full' },
}
])
@@ -248,19 +310,31 @@ class TestSingleTransaction(iotests.QMPTestCase):
self.wait_until_completed()
self.vm.shutdown()
- self.assertTrue(iotests.compare_images(test_img, target_img),
+ self.assertTrue(iotests.compare_images(test_img, image),
'target image does not match source after backup')
- def test_medium_not_found(self):
+ def test_pause_drive_backup(self):
+ self.do_test_pause('drive-backup', target_img, target_img)
+
+ def test_pause_blockdev_backup(self):
+ self.do_test_pause('blockdev-backup', 'drive1', blockdev_target_img)
+
+ def do_test_medium_not_found(self, cmd, target):
result = self.vm.qmp('transaction', actions=[{
- 'type': 'drive-backup',
+ 'type': cmd,
'data': { 'device': 'ide1-cd0',
- 'target': target_img,
+ 'target': target,
'sync': 'full' },
}
])
self.assert_qmp(result, 'error/class', 'GenericError')
+ def test_medium_not_found_drive_backup(self):
+ self.do_test_medium_not_found('drive-backup', target_img)
+
+ def test_medium_not_found_blockdev_backup(self):
+ self.do_test_medium_not_found('blockdev-backup', 'drive1')
+
def test_image_not_found(self):
result = self.vm.qmp('transaction', actions=[{
'type': 'drive-backup',
@@ -283,6 +357,43 @@ class TestSingleTransaction(iotests.QMPTestCase):
])
self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ def test_target_is_source(self):
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'drive0',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
def test_abort(self):
result = self.vm.qmp('transaction', actions=[{
'type': 'drive-backup',
@@ -298,5 +409,31 @@ class TestSingleTransaction(iotests.QMPTestCase):
self.assert_qmp(result, 'error/class', 'GenericError')
self.assert_no_active_block_jobs()
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }, {
+ 'type': 'Abort',
+ 'data': {},
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ self.assert_no_active_block_jobs()
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }, {
+ 'type': 'Abort',
+ 'data': {},
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ self.assert_no_active_block_jobs()
+
if __name__ == '__main__':
iotests.main(supported_fmts=['raw', 'qcow2'])
diff --git a/tests/qemu-iotests/055.out b/tests/qemu-iotests/055.out
index 6323079..42314e9 100644
--- a/tests/qemu-iotests/055.out
+++ b/tests/qemu-iotests/055.out
@@ -1,5 +1,5 @@
-..............
+........................
----------------------------------------------------------------------
-Ran 14 tests
+Ran 24 tests
OK
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread