* [PATCH 0/2 3.18] Fixes for Bug #88811 @ 2014-11-25 16:32 Larry Finger 2014-11-25 16:32 ` [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem Larry Finger 2014-11-25 16:32 ` [PATCH 2/2 3.18] rtlwifi: Change order in device startup Larry Finger 0 siblings, 2 replies; 7+ messages in thread From: Larry Finger @ 2014-11-25 16:32 UTC (permalink / raw) To: linville; +Cc: linux-wireless, Larry Finger, netdev, Valerio Passini These two patches are needed to fix a regression introduced when driver rtl8821ae was moved from staging to the regular wireless tree. I am sorry that these fixes are so late in the 3.18 cycle. Larry Larry Finger (2): rtlwifi: rtl8821ae: Fix 5G detection problem rtlwifi: Change order in device startup drivers/net/wireless/rtlwifi/pci.c | 20 ++++++++++---------- drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- 2 files changed, 13 insertions(+), 12 deletions(-) -- 2.1.2 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem 2014-11-25 16:32 [PATCH 0/2 3.18] Fixes for Bug #88811 Larry Finger @ 2014-11-25 16:32 ` Larry Finger 2014-11-25 18:46 ` John W. Linville 2014-11-25 16:32 ` [PATCH 2/2 3.18] rtlwifi: Change order in device startup Larry Finger 1 sibling, 1 reply; 7+ messages in thread From: Larry Finger @ 2014-11-25 16:32 UTC (permalink / raw) To: linville; +Cc: linux-wireless, Larry Finger, netdev, Valerio Passini The changes associated with moving this driver from staging to the regular tree missed one section setting the allowable rates for the 5GHz band. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <valerio.passini@unicam.it> Tested-by: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Valerio Passini <valerio.passini@unicam.it> --- drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c index 310d316..18f34f7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c @@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, mac->opmode == NL80211_IFTYPE_ADHOC) macid = sta->aid + 1; if (wirelessmode == WIRELESS_MODE_N_5G || - wirelessmode == WIRELESS_MODE_AC_5G) - ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; + wirelessmode == WIRELESS_MODE_AC_5G || + wirelessmode == WIRELESS_MODE_A) + ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ])<<4; else ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; -- 2.1.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem 2014-11-25 16:32 ` [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem Larry Finger @ 2014-11-25 18:46 ` John W. Linville 2014-11-25 19:50 ` Larry Finger 0 siblings, 1 reply; 7+ messages in thread From: John W. Linville @ 2014-11-25 18:46 UTC (permalink / raw) To: Larry Finger; +Cc: linux-wireless, netdev, Valerio Passini On Tue, Nov 25, 2014 at 10:32:06AM -0600, Larry Finger wrote: > The changes associated with moving this driver from staging to the regular > tree missed one section setting the allowable rates for the 5GHz band. > > This patch is needed to fix the regression reported in Bug #88811 > (https://bugzilla.kernel.org/show_bug.cgi?id=88811). > > Reported-by: Valerio Passini <valerio.passini@unicam.it> > Tested-by: Valerio Passini <valerio.passini@unicam.it> > Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> > Cc: Valerio Passini <valerio.passini@unicam.it> > --- > drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > index 310d316..18f34f7 100644 > --- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > +++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > @@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, > mac->opmode == NL80211_IFTYPE_ADHOC) > macid = sta->aid + 1; > if (wirelessmode == WIRELESS_MODE_N_5G || > - wirelessmode == WIRELESS_MODE_AC_5G) > - ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; > + wirelessmode == WIRELESS_MODE_AC_5G || > + wirelessmode == WIRELESS_MODE_A) > + ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ])<<4; The parenthesis seem superfluous. How about this line instead? + ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4; > else > ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; > > -- > 2.1.2 > > -- John W. Linville Someday the world will need a hero, and you linville@tuxdriver.com might be all we have. Be ready. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem 2014-11-25 18:46 ` John W. Linville @ 2014-11-25 19:50 ` Larry Finger 2014-11-25 19:53 ` John W. Linville 0 siblings, 1 reply; 7+ messages in thread From: Larry Finger @ 2014-11-25 19:50 UTC (permalink / raw) To: John W. Linville; +Cc: linux-wireless, netdev, Valerio Passini On 11/25/2014 12:46 PM, John W. Linville wrote: > On Tue, Nov 25, 2014 at 10:32:06AM -0600, Larry Finger wrote: >> The changes associated with moving this driver from staging to the regular >> tree missed one section setting the allowable rates for the 5GHz band. >> >> This patch is needed to fix the regression reported in Bug #88811 >> (https://bugzilla.kernel.org/show_bug.cgi?id=88811). >> >> Reported-by: Valerio Passini <valerio.passini@unicam.it> >> Tested-by: Valerio Passini <valerio.passini@unicam.it> >> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> >> Cc: Valerio Passini <valerio.passini@unicam.it> >> --- >> drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c >> index 310d316..18f34f7 100644 >> --- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c >> +++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c >> @@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, >> mac->opmode == NL80211_IFTYPE_ADHOC) >> macid = sta->aid + 1; >> if (wirelessmode == WIRELESS_MODE_N_5G || >> - wirelessmode == WIRELESS_MODE_AC_5G) >> - ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; >> + wirelessmode == WIRELESS_MODE_AC_5G || >> + wirelessmode == WIRELESS_MODE_A) >> + ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ])<<4; > > The parenthesis seem superfluous. How about this line instead? > > + ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4; > >> else >> ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; Good idea. V2 is on its way. Larry ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem @ 2014-11-25 19:53 ` John W. Linville 0 siblings, 0 replies; 7+ messages in thread From: John W. Linville @ 2014-11-25 19:53 UTC (permalink / raw) To: Larry Finger; +Cc: linux-wireless, netdev, Valerio Passini On Tue, Nov 25, 2014 at 01:50:32PM -0600, Larry Finger wrote: > On 11/25/2014 12:46 PM, John W. Linville wrote: > >On Tue, Nov 25, 2014 at 10:32:06AM -0600, Larry Finger wrote: > >>The changes associated with moving this driver from staging to the regular > >>tree missed one section setting the allowable rates for the 5GHz band. > >> > >>This patch is needed to fix the regression reported in Bug #88811 > >>(https://bugzilla.kernel.org/show_bug.cgi?id=88811). > >> > >>Reported-by: Valerio Passini <valerio.passini@unicam.it> > >>Tested-by: Valerio Passini <valerio.passini@unicam.it> > >>Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> > >>Cc: Valerio Passini <valerio.passini@unicam.it> > >>--- > >> drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- > >> 1 file changed, 3 insertions(+), 2 deletions(-) > >> > >>diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>index 310d316..18f34f7 100644 > >>--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>@@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, > >> mac->opmode == NL80211_IFTYPE_ADHOC) > >> macid = sta->aid + 1; > >> if (wirelessmode == WIRELESS_MODE_N_5G || > >>- wirelessmode == WIRELESS_MODE_AC_5G) > >>- ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; > >>+ wirelessmode == WIRELESS_MODE_AC_5G || > >>+ wirelessmode == WIRELESS_MODE_A) > >>+ ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ])<<4; > > > >The parenthesis seem superfluous. How about this line instead? > > > >+ ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4; > > > >> else > >> ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; > > Good idea. V2 is on its way. No need -- I merged it with my version of the line. :-) John -- John W. Linville Someday the world will need a hero, and you linville@tuxdriver.com might be all we have. Be ready. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem @ 2014-11-25 19:53 ` John W. Linville 0 siblings, 0 replies; 7+ messages in thread From: John W. Linville @ 2014-11-25 19:53 UTC (permalink / raw) To: Larry Finger Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA, netdev-u79uwXL29TY76Z2rM5mHXA, Valerio Passini On Tue, Nov 25, 2014 at 01:50:32PM -0600, Larry Finger wrote: > On 11/25/2014 12:46 PM, John W. Linville wrote: > >On Tue, Nov 25, 2014 at 10:32:06AM -0600, Larry Finger wrote: > >>The changes associated with moving this driver from staging to the regular > >>tree missed one section setting the allowable rates for the 5GHz band. > >> > >>This patch is needed to fix the regression reported in Bug #88811 > >>(https://bugzilla.kernel.org/show_bug.cgi?id=88811). > >> > >>Reported-by: Valerio Passini <valerio.passini-vbqOIlEVYMdeoWH0uzbU5w@public.gmane.org> > >>Tested-by: Valerio Passini <valerio.passini-vbqOIlEVYMdeoWH0uzbU5w@public.gmane.org> > >>Signed-off-by: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org> > >>Cc: Valerio Passini <valerio.passini-vbqOIlEVYMdeoWH0uzbU5w@public.gmane.org> > >>--- > >> drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 5 +++-- > >> 1 file changed, 3 insertions(+), 2 deletions(-) > >> > >>diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>index 310d316..18f34f7 100644 > >>--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c > >>@@ -3672,8 +3672,9 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw, > >> mac->opmode == NL80211_IFTYPE_ADHOC) > >> macid = sta->aid + 1; > >> if (wirelessmode == WIRELESS_MODE_N_5G || > >>- wirelessmode == WIRELESS_MODE_AC_5G) > >>- ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ]; > >>+ wirelessmode == WIRELESS_MODE_AC_5G || > >>+ wirelessmode == WIRELESS_MODE_A) > >>+ ratr_bitmap = (sta->supp_rates[NL80211_BAND_5GHZ])<<4; > > > >The parenthesis seem superfluous. How about this line instead? > > > >+ ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4; > > > >> else > >> ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ]; > > Good idea. V2 is on its way. No need -- I merged it with my version of the line. :-) John -- John W. Linville Someday the world will need a hero, and you linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/2 3.18] rtlwifi: Change order in device startup 2014-11-25 16:32 [PATCH 0/2 3.18] Fixes for Bug #88811 Larry Finger 2014-11-25 16:32 ` [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem Larry Finger @ 2014-11-25 16:32 ` Larry Finger 1 sibling, 0 replies; 7+ messages in thread From: Larry Finger @ 2014-11-25 16:32 UTC (permalink / raw) To: linville; +Cc: linux-wireless, Larry Finger, netdev, Valerio Passini The existing order of steps when starting the PCI devices works for 2.4G devices, but fails to initialize the 5G section of the RTL8821AE hardware. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <valerio.passini@unicam.it> Tested-by: Valerio Passini <valerio.passini@unicam.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Valerio Passini <valerio.passini@unicam.it> --- drivers/net/wireless/rtlwifi/pci.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 61f5d36..846a2e6 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -2249,6 +2249,16 @@ int rtl_pci_probe(struct pci_dev *pdev, /*like read eeprom and so on */ rtlpriv->cfg->ops->read_eeprom_info(hw); + if (rtlpriv->cfg->ops->init_sw_vars(hw)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n"); + err = -ENODEV; + goto fail3; + } + rtlpriv->cfg->ops->init_sw_leds(hw); + + /*aspm */ + rtl_pci_init_aspm(hw); + /* Init mac80211 sw */ err = rtl_init_core(hw); if (err) { @@ -2264,16 +2274,6 @@ int rtl_pci_probe(struct pci_dev *pdev, goto fail3; } - if (rtlpriv->cfg->ops->init_sw_vars(hw)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n"); - err = -ENODEV; - goto fail3; - } - rtlpriv->cfg->ops->init_sw_leds(hw); - - /*aspm */ - rtl_pci_init_aspm(hw); - err = ieee80211_register_hw(hw); if (err) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, -- 2.1.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-11-25 20:46 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-25 16:32 [PATCH 0/2 3.18] Fixes for Bug #88811 Larry Finger 2014-11-25 16:32 ` [PATCH 1/2 3.18] rtlwifi: rtl8821ae: Fix 5G detection problem Larry Finger 2014-11-25 18:46 ` John W. Linville 2014-11-25 19:50 ` Larry Finger 2014-11-25 19:53 ` John W. Linville 2014-11-25 19:53 ` John W. Linville 2014-11-25 16:32 ` [PATCH 2/2 3.18] rtlwifi: Change order in device startup Larry Finger
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.