From: Marc Zyngier <marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.
Date: Tue, 02 Dec 2014 13:37:59 +0000 [thread overview]
Message-ID: <547DC0B7.6050600@arm.com> (raw)
In-Reply-To: <CAMuHMdWj0Z66fya=7oN=ZUoz0TQOHFxBe0wyHmkDDVzU8Lafog@mail.gmail.com>
On 02/12/14 13:27, Geert Uytterhoeven wrote:
> On Tue, Nov 25, 2014 at 9:04 AM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
>> Add support to use gic as a parent for stacked irq domain.
>>
>> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
>
> This change (which is now in -next as commit 9a1091ef0017c40a) breaks
> booting on r8a7740/armadillo-legacy.
>
> It hangs because the timers cannot get their interrupts:
>
> console [tty0] enabled
> sh-tmu.0: ch0: used for clock events
> sh-tmu.0: ch0: used for periodic clock events
> sh-tmu.0: ch0: failed to request irq 230
> sh-tmu.0: ch1: used as clock source
> sh-cmt-48.1: ch0: failed to request irq 90
> sh-cmt-48.1: ch0: registration failed
> earlytimer: unable to probe sh-cmt-48 early.
> Calibrating delay loop...
Grmbl... Are you, by any (lack of) chance, using a setup where the GIC
is probed via DT, but the timers have their IRQs hardcoded?
M.
--
Jazz is not dead. It just smells funny...
WARNING: multiple messages have this Message-ID (diff)
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.
Date: Tue, 02 Dec 2014 13:37:59 +0000 [thread overview]
Message-ID: <547DC0B7.6050600@arm.com> (raw)
In-Reply-To: <CAMuHMdWj0Z66fya=7oN=ZUoz0TQOHFxBe0wyHmkDDVzU8Lafog@mail.gmail.com>
On 02/12/14 13:27, Geert Uytterhoeven wrote:
> On Tue, Nov 25, 2014 at 9:04 AM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
>> Add support to use gic as a parent for stacked irq domain.
>>
>> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
>
> This change (which is now in -next as commit 9a1091ef0017c40a) breaks
> booting on r8a7740/armadillo-legacy.
>
> It hangs because the timers cannot get their interrupts:
>
> console [tty0] enabled
> sh-tmu.0: ch0: used for clock events
> sh-tmu.0: ch0: used for periodic clock events
> sh-tmu.0: ch0: failed to request irq 230
> sh-tmu.0: ch1: used as clock source
> sh-cmt-48.1: ch0: failed to request irq 90
> sh-cmt-48.1: ch0: registration failed
> earlytimer: unable to probe sh-cmt-48 early.
> Calibrating delay loop...
Grmbl... Are you, by any (lack of) chance, using a setup where the GIC
is probed via DT, but the timers have their IRQs hardcoded?
M.
--
Jazz is not dead. It just smells funny...
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
To: Geert Uytterhoeven
<geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>,
Yingjoe Chen
<yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Mark Rutland <Mark.Rutland-5wv7dgnIgG8@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Boris BREZILLON
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Pawel Moll <Pawel.Moll-5wv7dgnIgG8@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"hc.yen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<hc.yen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"yh.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<yh.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org"
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"nathan.chung-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<nathan.chung-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
"yingjoe.chen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org"
<yingjoe.chen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"eddie.huang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org"
<eddie.huang-NuS5LvNUpcLQFizaE/u3fw@public.gmane.org>
Subject: Re: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.
Date: Tue, 02 Dec 2014 13:37:59 +0000 [thread overview]
Message-ID: <547DC0B7.6050600@arm.com> (raw)
In-Reply-To: <CAMuHMdWj0Z66fya=7oN=ZUoz0TQOHFxBe0wyHmkDDVzU8Lafog-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 02/12/14 13:27, Geert Uytterhoeven wrote:
> On Tue, Nov 25, 2014 at 9:04 AM, Yingjoe Chen <yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
>> Add support to use gic as a parent for stacked irq domain.
>>
>> Signed-off-by: Yingjoe Chen <yingjoe.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>
> This change (which is now in -next as commit 9a1091ef0017c40a) breaks
> booting on r8a7740/armadillo-legacy.
>
> It hangs because the timers cannot get their interrupts:
>
> console [tty0] enabled
> sh-tmu.0: ch0: used for clock events
> sh-tmu.0: ch0: used for periodic clock events
> sh-tmu.0: ch0: failed to request irq 230
> sh-tmu.0: ch1: used as clock source
> sh-cmt-48.1: ch0: failed to request irq 90
> sh-cmt-48.1: ch0: registration failed
> earlytimer: unable to probe sh-cmt-48 early.
> Calibrating delay loop...
Grmbl... Are you, by any (lack of) chance, using a setup where the GIC
is probed via DT, but the timers have their IRQs hardcoded?
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <marc.zyngier@arm.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>,
Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>,
Jason Cooper <jason@lakedaemon.net>,
Thomas Gleixner <tglx@linutronix.de>,
Jiang Liu <jiang.liu@linux.intel.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Russell King <linux@arm.linux.org.uk>,
Pawel Moll <Pawel.Moll@arm.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"hc.yen@mediatek.com" <hc.yen@mediatek.com>,
"srv_heupstream@mediatek.com" <srv_heupstream@mediatek.com>,
"yh.chen@mediatek.com" <yh.chen@mediatek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"grant.likely@linaro.org" <grant.likely@linaro.org>,
Yijing Wang <wangyijing@huawei.com>,
Rob Herring <robh+dt@kernel.org>,
"nathan.chung@mediatek.com" <nathan.chung@mediatek.com>,
"yingjoe.chen@gmail.com" <yingjoe.chen@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
"eddie.huang@mediatek.com" <eddie.huang@mediatek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Sascha Hauer <kernel@pengutronix.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Linux-sh list <linux-sh@vger.kernel.org>
Subject: Re: [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain.
Date: Tue, 02 Dec 2014 13:37:59 +0000 [thread overview]
Message-ID: <547DC0B7.6050600@arm.com> (raw)
In-Reply-To: <CAMuHMdWj0Z66fya=7oN=ZUoz0TQOHFxBe0wyHmkDDVzU8Lafog@mail.gmail.com>
On 02/12/14 13:27, Geert Uytterhoeven wrote:
> On Tue, Nov 25, 2014 at 9:04 AM, Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
>> Add support to use gic as a parent for stacked irq domain.
>>
>> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
>
> This change (which is now in -next as commit 9a1091ef0017c40a) breaks
> booting on r8a7740/armadillo-legacy.
>
> It hangs because the timers cannot get their interrupts:
>
> console [tty0] enabled
> sh-tmu.0: ch0: used for clock events
> sh-tmu.0: ch0: used for periodic clock events
> sh-tmu.0: ch0: failed to request irq 230
> sh-tmu.0: ch1: used as clock source
> sh-cmt-48.1: ch0: failed to request irq 90
> sh-cmt-48.1: ch0: registration failed
> earlytimer: unable to probe sh-cmt-48 early.
> Calibrating delay loop...
Grmbl... Are you, by any (lack of) chance, using a setup where the GIC
is probed via DT, but the timers have their IRQs hardcoded?
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2014-12-02 13:37 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-25 8:04 [PATCH v8 0/4] ARM: mediatek: Add support for interrupt polarity Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` [PATCH v8 1/4] irqchip: gic: Support hierarchy irq domain Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 11:27 ` Marc Zyngier
2014-11-25 11:27 ` Marc Zyngier
2014-11-25 11:27 ` Marc Zyngier
2014-12-02 13:27 ` Geert Uytterhoeven
2014-12-02 13:27 ` Geert Uytterhoeven
2014-12-02 13:27 ` Geert Uytterhoeven
2014-12-02 13:27 ` Geert Uytterhoeven
2014-12-02 13:37 ` Marc Zyngier [this message]
2014-12-02 13:37 ` Marc Zyngier
2014-12-02 13:37 ` Marc Zyngier
2014-12-02 13:37 ` Marc Zyngier
2014-12-02 13:55 ` Geert Uytterhoeven
2014-12-02 13:55 ` Geert Uytterhoeven
2014-12-02 13:55 ` Geert Uytterhoeven
2014-12-02 13:55 ` Geert Uytterhoeven
2014-12-02 14:12 ` Marc Zyngier
2014-12-02 14:12 ` Marc Zyngier
2014-12-02 14:12 ` Marc Zyngier
2014-12-02 14:12 ` Marc Zyngier
2014-11-25 8:04 ` [PATCH v8 2/4] ARM: mediatek: Add sysirq interrupt polarity support Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-29 17:40 ` Beniamino Galvani
2014-11-29 17:40 ` Beniamino Galvani
2014-11-29 17:40 ` Beniamino Galvani
2014-12-01 14:09 ` Yingjoe Chen
2014-12-01 14:09 ` Yingjoe Chen
2014-12-01 14:09 ` Yingjoe Chen
2014-11-25 8:04 ` [PATCH v8 3/4] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-27 13:31 ` Yingjoe Chen
2014-11-27 13:31 ` Yingjoe Chen
2014-11-27 13:31 ` Yingjoe Chen
2014-12-25 2:11 ` Yingjoe Chen
2014-12-25 2:11 ` Yingjoe Chen
2014-12-25 2:11 ` Yingjoe Chen
2015-01-02 10:16 ` Matthias Brugger
2015-01-02 10:16 ` Matthias Brugger
2015-01-02 10:16 ` Matthias Brugger
2014-11-25 8:04 ` [PATCH v8 4/4] dt-bindings: add bindings for mediatek sysirq Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-25 8:04 ` Yingjoe Chen
2014-11-26 8:08 ` [PATCH v8 0/4] ARM: mediatek: Add support for interrupt polarity Jason Cooper
2014-11-26 8:08 ` Jason Cooper
2014-11-26 8:08 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547DC0B7.6050600@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.