* [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... @ 2014-12-08 11:47 Anders Blomdell 2014-12-09 12:43 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2014-12-08 11:47 UTC (permalink / raw) To: Xenomai -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ...which leads to rtnet utils not being properly built. I think the following is needed: autoconf automake git add configure utils/Makefile.in utils/net/Makefile.in git commit /Anders - -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJUhY/KAAoJENZYyvaDG8Nc+z8H/351Q2joGXsGiREV6giprokC xhFpFIDl0lMtsha5PQpTf6AnY1Bau++HnuiWObiIFPd134IriNSCaT/g0NG//76U oUQUAG24XGTW5pGvXkczM/rnlrD7Pd6QYpbTU9sjubCp/Bs3UXVNHxZEQl6auYDs /MY5h+NS1FY4IA8Zc/GIa4jprUQ+4Dm4UAgAvvxTH7cA3y+PC6YheCSUYXk74FDo 6H7cfbnW/cago1DPvLPFDJkFofigjTP0cnmSHR3gFDoRleTZaXHck3D1bRSmTr01 SknuhOg5UiniHxN0pzugXI8qc1wGCCTgT6CWmei+ClLWkktX9KseYpw9kjrkDHI= =PFzc -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-08 11:47 [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf Anders Blomdell @ 2014-12-09 12:43 ` Gilles Chanteperdrix 2014-12-09 15:19 ` Anders Blomdell 0 siblings, 1 reply; 12+ messages in thread From: Gilles Chanteperdrix @ 2014-12-09 12:43 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > ...which leads to rtnet utils not being properly built. I think > the following is needed: > > autoconf > automake > git add configure utils/Makefile.in utils/net/Makefile.in > git commit Oops. My fault. I did not commit the changes, because I do not have the same versions of the autotools as Philippe, so the commit would have changed all files (and at the time, I even had to comment out some code in configure.ac to get my autotools to work, but this issue has been resolved since then). But I forgot to tell Philippe to bootstrap. Note that if you do not want to think about what commands you should run, you should use autoreconf. autoreconf is the reason why the "bootstrap" script was removed. I wonder if as long as Xenomai 3 is in its development stage, it would not make sense to remove the autotools file from the repository and ask the users who want to use the repository to run autoreconf before compiling. I do not know if it will seem acceptable to those who work from the repository. -- Gilles. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 173 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/0181fcb9/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 12:43 ` Gilles Chanteperdrix @ 2014-12-09 15:19 ` Anders Blomdell 2014-12-09 15:26 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2014-12-09 15:19 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Xenomai -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: >> ...which leads to rtnet utils not being properly built. I think >> the following is needed: >> >> autoconf >> automake >> git add configure utils/Makefile.in utils/net/Makefile.in >> git commit > > Oops. My fault. I did not commit the changes, because I do not have > the same versions of the autotools as Philippe, so the commit would > have changed all files (and at the time, I even had to comment out > some code in configure.ac to get my autotools to work, but this > issue has been resolved since then). But I forgot to tell Philippe > to bootstrap. > > Note that if you do not want to think about what commands you should > run, you should use autoreconf. autoreconf is the reason why the > "bootstrap" script was removed. Figured that out after I sent the mail :-) > I wonder if as long as Xenomai 3 is in its development stage, it > would not make sense to remove the autotools file from the > repository and ask the users who want to use the repository to run > autoreconf before compiling. I do not know if it will seem > acceptable to those who work from the repository. Make total sense to me, would be nice with a command that does something like (to simplify packaging): # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') # git archive --prefix $XENO/ HEAD -o $XENO.tar # tar -rf $XENO.tar all autoreconfed files # xz $XENO.tar /Anders - -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJUhxMTAAoJENZYyvaDG8NcQT8H/REi1/+u9aFcIxoeNyT9a2tm nPtdGAsUFfEOEUugiedjb7J7knE2PZwptSP7RqOi4jYhScKWDJyyVVb4CCvqOjbe wcR4e86dtDCV101mkDdS+Fgp5oo6rDTZyM0zR4Io1gp3JHsbvORMo4HmYo3EbNfj t2w8XzIXlign73lTH1/m9OPU0X/TDOL4dTVEGZHG43pIAl6H6B9D3lMoGTbTWXW2 1YvnDzVRucblCcaX7jXdvbB6DPYH24q9ikaJFJ8/LkGyXjdWGuMfGgKoUmCCUajd moicW5vcbma76xdbzgZjc1TRMfD8WaJQY/oYEr5WRrvIXJYalebGC9O2kKuX9Ww= =Y+k4 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 15:19 ` Anders Blomdell @ 2014-12-09 15:26 ` Gilles Chanteperdrix 2014-12-09 15:32 ` Anders Blomdell 0 siblings, 1 reply; 12+ messages in thread From: Gilles Chanteperdrix @ 2014-12-09 15:26 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: > On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > > On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > >> ...which leads to rtnet utils not being properly built. I think > >> the following is needed: > >> > >> autoconf > >> automake > >> git add configure utils/Makefile.in utils/net/Makefile.in > >> git commit > > > > Oops. My fault. I did not commit the changes, because I do not have > > the same versions of the autotools as Philippe, so the commit would > > have changed all files (and at the time, I even had to comment out > > some code in configure.ac to get my autotools to work, but this > > issue has been resolved since then). But I forgot to tell Philippe > > to bootstrap. > > > > Note that if you do not want to think about what commands you should > > run, you should use autoreconf. autoreconf is the reason why the > > "bootstrap" script was removed. > Figured that out after I sent the mail :-) > > > I wonder if as long as Xenomai 3 is in its development stage, it > > would not make sense to remove the autotools file from the > > repository and ask the users who want to use the repository to run > > autoreconf before compiling. I do not know if it will seem > > acceptable to those who work from the repository. > Make total sense to me, would be nice with a command that does > something like (to simplify packaging): > > # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') > # git archive --prefix $XENO/ HEAD -o $XENO.tar > # tar -rf $XENO.tar all autoreconfed files > # xz $XENO.tar What is wrong with the packages generated by cgit? -- Gilles. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 173 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/319a57fb/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 15:26 ` Gilles Chanteperdrix @ 2014-12-09 15:32 ` Anders Blomdell 2014-12-09 15:33 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2014-12-09 15:32 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Xenomai -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2014-12-09 16:26, Gilles Chanteperdrix wrote: > On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: >> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: >>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: >>>> ...which leads to rtnet utils not being properly built. I think >>>> the following is needed: >>>> >>>> autoconf >>>> automake >>>> git add configure utils/Makefile.in utils/net/Makefile.in >>>> git commit >>> >>> Oops. My fault. I did not commit the changes, because I do not have >>> the same versions of the autotools as Philippe, so the commit would >>> have changed all files (and at the time, I even had to comment out >>> some code in configure.ac to get my autotools to work, but this >>> issue has been resolved since then). But I forgot to tell Philippe >>> to bootstrap. >>> >>> Note that if you do not want to think about what commands you should >>> run, you should use autoreconf. autoreconf is the reason why the >>> "bootstrap" script was removed. >> Figured that out after I sent the mail :-) >> >>> I wonder if as long as Xenomai 3 is in its development stage, it >>> would not make sense to remove the autotools file from the >>> repository and ask the users who want to use the repository to run >>> autoreconf before compiling. I do not know if it will seem >>> acceptable to those who work from the repository. >> Make total sense to me, would be nice with a command that does >> something like (to simplify packaging): >> >> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') >> # git archive --prefix $XENO/ HEAD -o $XENO.tar >> # tar -rf $XENO.tar all autoreconfed files >> # xz $XENO.tar > > What is wrong with the packages generated by cgit? Probably nothing, except that they (probably) don't contain the files generated by autoreconf, I can of course put that into the packaging scripts (rpm spec files). /Anders - -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJUhxX3AAoJENZYyvaDG8NcfD4H/AtauCiybhsKs9tgrSORnvr1 rHKYtL/PDyr2ELpoz2G739huJ9+t+YJUznJAmBrWs2OPFZJhqwdq8FRxWFoTOJyJ jcVhWd5qDbHjD0jdsOUlxyVyH+Wo36D2bpTw+AIsmKE3x34DWKakkVkMFY3RSa/z QOvpEUzMcLAyW3fbdNKRE/JPc9oRcbniooUD7M1kLsvDvyrjOEO/VA3idwn7FoGG kiONj9ovgdSeldSefA34EEgr8cOz8vDv7YKdgEzduPmoKKkb6Wv1F5AE6JuzR3kO Ypf2FChDozb3Q7iySGl8fnZHnu2vPYyGihPvoJBHIRAixfy/5MRPxNluG/mLzCo= =k2Yc -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 15:32 ` Anders Blomdell @ 2014-12-09 15:33 ` Gilles Chanteperdrix 2014-12-09 17:25 ` Anders Blomdell 0 siblings, 1 reply; 12+ messages in thread From: Gilles Chanteperdrix @ 2014-12-09 15:33 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: > On 2014-12-09 16:26, Gilles Chanteperdrix wrote: > > On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: > >> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > >>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > >>>> ...which leads to rtnet utils not being properly built. I think > >>>> the following is needed: > >>>> > >>>> autoconf > >>>> automake > >>>> git add configure utils/Makefile.in utils/net/Makefile.in > >>>> git commit > >>> > >>> Oops. My fault. I did not commit the changes, because I do not have > >>> the same versions of the autotools as Philippe, so the commit would > >>> have changed all files (and at the time, I even had to comment out > >>> some code in configure.ac to get my autotools to work, but this > >>> issue has been resolved since then). But I forgot to tell Philippe > >>> to bootstrap. > >>> > >>> Note that if you do not want to think about what commands you should > >>> run, you should use autoreconf. autoreconf is the reason why the > >>> "bootstrap" script was removed. > >> Figured that out after I sent the mail :-) > >> > >>> I wonder if as long as Xenomai 3 is in its development stage, it > >>> would not make sense to remove the autotools file from the > >>> repository and ask the users who want to use the repository to run > >>> autoreconf before compiling. I do not know if it will seem > >>> acceptable to those who work from the repository. > >> Make total sense to me, would be nice with a command that does > >> something like (to simplify packaging): > >> > >> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') > >> # git archive --prefix $XENO/ HEAD -o $XENO.tar > >> # tar -rf $XENO.tar all autoreconfed files > >> # xz $XENO.tar > > > > What is wrong with the packages generated by cgit? > Probably nothing, except that they (probably) don't contain > the files generated by autoreconf, I can of course put that into > the packaging scripts (rpm spec files). Yes, if you can. I mean, a lot of build system are doing that already anyway. -- Gilles. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 173 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/eb820f10/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 15:33 ` Gilles Chanteperdrix @ 2014-12-09 17:25 ` Anders Blomdell 2014-12-09 19:23 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2014-12-09 17:25 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Xenomai -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 2014-12-09 16:33, Gilles Chanteperdrix wrote: > On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: >> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: >>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: >>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: >>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: >>>>>> ...which leads to rtnet utils not being properly built. I think >>>>>> the following is needed: >>>>>> >>>>>> autoconf >>>>>> automake >>>>>> git add configure utils/Makefile.in utils/net/Makefile.in >>>>>> git commit >>>>> >>>>> Oops. My fault. I did not commit the changes, because I do not have >>>>> the same versions of the autotools as Philippe, so the commit would >>>>> have changed all files (and at the time, I even had to comment out >>>>> some code in configure.ac to get my autotools to work, but this >>>>> issue has been resolved since then). But I forgot to tell Philippe >>>>> to bootstrap. >>>>> >>>>> Note that if you do not want to think about what commands you should >>>>> run, you should use autoreconf. autoreconf is the reason why the >>>>> "bootstrap" script was removed. >>>> Figured that out after I sent the mail :-) >>>> >>>>> I wonder if as long as Xenomai 3 is in its development stage, it >>>>> would not make sense to remove the autotools file from the >>>>> repository and ask the users who want to use the repository to run >>>>> autoreconf before compiling. I do not know if it will seem >>>>> acceptable to those who work from the repository. >>>> Make total sense to me, would be nice with a command that does >>>> something like (to simplify packaging): >>>> >>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') >>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar >>>> # tar -rf $XENO.tar all autoreconfed files >>>> # xz $XENO.tar >>> >>> What is wrong with the packages generated by cgit? >> Probably nothing, except that they (probably) don't contain >> the files generated by autoreconf, I can of course put that into >> the packaging scripts (rpm spec files). > > Yes, if you can. I mean, a lot of build system are doing that > already anyway. OK, sorry for the noise... /Anders - -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAEBAgAGBQJUhzCcAAoJENZYyvaDG8Nc9jgH/2fHd88/HwcT+aW3rJTvFgu4 2bOlGTJYcktO+YoWPyLWCUYKUvedIYBls07I/STWNoIdP+F1+H0sqWXOKPif2Clx sqFNIYebD9g0FVkXwMN7v4gknIWpBw/Hx0m7KnERy+IsU7ouqGxkrp0zIIAbM5KM uIJWtUTIV50GTdsUr1CaNx08KMW2IouGkMbyhZjGp1rC+cZZCe43wZMCfu26BgG2 5FcHZWc8HGxQ03hgMidInFHQJDJkbMD9E9MrEwaiQE4mWOd/BoUtPHlgss/wqy4P QKuo4iY4JupWnKCsxQyfkU+lYOtnbnIBMQKXMpt1dJlrmCPIKZOskRPE3JNcV94= =2r5W -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 17:25 ` Anders Blomdell @ 2014-12-09 19:23 ` Gilles Chanteperdrix 2014-12-10 8:35 ` Anders Blomdell 0 siblings, 1 reply; 12+ messages in thread From: Gilles Chanteperdrix @ 2014-12-09 19:23 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote: > On 2014-12-09 16:33, Gilles Chanteperdrix wrote: > > On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: > >> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: > >>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: > >>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > >>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > >>>>>> ...which leads to rtnet utils not being properly built. I think > >>>>>> the following is needed: > >>>>>> > >>>>>> autoconf > >>>>>> automake > >>>>>> git add configure utils/Makefile.in utils/net/Makefile.in > >>>>>> git commit > >>>>> > >>>>> Oops. My fault. I did not commit the changes, because I do not have > >>>>> the same versions of the autotools as Philippe, so the commit would > >>>>> have changed all files (and at the time, I even had to comment out > >>>>> some code in configure.ac to get my autotools to work, but this > >>>>> issue has been resolved since then). But I forgot to tell Philippe > >>>>> to bootstrap. > >>>>> > >>>>> Note that if you do not want to think about what commands you should > >>>>> run, you should use autoreconf. autoreconf is the reason why the > >>>>> "bootstrap" script was removed. > >>>> Figured that out after I sent the mail :-) > >>>> > >>>>> I wonder if as long as Xenomai 3 is in its development stage, it > >>>>> would not make sense to remove the autotools file from the > >>>>> repository and ask the users who want to use the repository to run > >>>>> autoreconf before compiling. I do not know if it will seem > >>>>> acceptable to those who work from the repository. > >>>> Make total sense to me, would be nice with a command that does > >>>> something like (to simplify packaging): > >>>> > >>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') > >>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar > >>>> # tar -rf $XENO.tar all autoreconfed files > >>>> # xz $XENO.tar > >>> > >>> What is wrong with the packages generated by cgit? > >> Probably nothing, except that they (probably) don't contain > >> the files generated by autoreconf, I can of course put that into > >> the packaging scripts (rpm spec files). > > > > Yes, if you can. I mean, a lot of build system are doing that > > already anyway. > OK, sorry for the noise... Actually, that was an answer to the question I asked: do users prefer to have the generated files in the git, and your answer is yes. -- Gilles. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 173 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/39a4ed72/attachment.sig> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-09 19:23 ` Gilles Chanteperdrix @ 2014-12-10 8:35 ` Anders Blomdell 2015-01-09 16:09 ` Anders Blomdell 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2014-12-10 8:35 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Xenomai On 2014-12-09 20:23, Gilles Chanteperdrix wrote: > On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote: >> On 2014-12-09 16:33, Gilles Chanteperdrix wrote: >>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: >>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: >>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: >>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: >>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: >>>>>>>> ...which leads to rtnet utils not being properly built. I think >>>>>>>> the following is needed: >>>>>>>> >>>>>>>> autoconf >>>>>>>> automake >>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in >>>>>>>> git commit >>>>>>> >>>>>>> Oops. My fault. I did not commit the changes, because I do not have >>>>>>> the same versions of the autotools as Philippe, so the commit would >>>>>>> have changed all files (and at the time, I even had to comment out >>>>>>> some code in configure.ac to get my autotools to work, but this >>>>>>> issue has been resolved since then). But I forgot to tell Philippe >>>>>>> to bootstrap. >>>>>>> >>>>>>> Note that if you do not want to think about what commands you should >>>>>>> run, you should use autoreconf. autoreconf is the reason why the >>>>>>> "bootstrap" script was removed. >>>>>> Figured that out after I sent the mail :-) >>>>>> >>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it >>>>>>> would not make sense to remove the autotools file from the >>>>>>> repository and ask the users who want to use the repository to run >>>>>>> autoreconf before compiling. I do not know if it will seem >>>>>>> acceptable to those who work from the repository. >>>>>> Make total sense to me, would be nice with a command that does >>>>>> something like (to simplify packaging): >>>>>> >>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') >>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar >>>>>> # tar -rf $XENO.tar all autoreconfed files >>>>>> # xz $XENO.tar >>>>> >>>>> What is wrong with the packages generated by cgit? >>>> Probably nothing, except that they (probably) don't contain >>>> the files generated by autoreconf, I can of course put that into >>>> the packaging scripts (rpm spec files). >>> >>> Yes, if you can. I mean, a lot of build system are doing that >>> already anyway. >> OK, sorry for the noise... > > Actually, that was an answer to the question I asked: do users prefer > to have the generated files in the git, and your answer is yes. May I retract that answer to a no?, having autogenerated that are out of sync is far worse then having to make an occasional autoreconf. I have adjusted my buildfiles to reflect this new (?) opinion. Regards /Anders -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2014-12-10 8:35 ` Anders Blomdell @ 2015-01-09 16:09 ` Anders Blomdell 2015-01-09 16:15 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Anders Blomdell @ 2015-01-09 16:09 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: Xenomai On 2014-12-10 09:35, Anders Blomdell wrote: > On 2014-12-09 20:23, Gilles Chanteperdrix wrote: >> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote: >>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote: >>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: >>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: >>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: >>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: >>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: >>>>>>>>> ...which leads to rtnet utils not being properly built. I think >>>>>>>>> the following is needed: >>>>>>>>> >>>>>>>>> autoconf >>>>>>>>> automake >>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in >>>>>>>>> git commit >>>>>>>> >>>>>>>> Oops. My fault. I did not commit the changes, because I do not have >>>>>>>> the same versions of the autotools as Philippe, so the commit would >>>>>>>> have changed all files (and at the time, I even had to comment out >>>>>>>> some code in configure.ac to get my autotools to work, but this >>>>>>>> issue has been resolved since then). But I forgot to tell Philippe >>>>>>>> to bootstrap. >>>>>>>> >>>>>>>> Note that if you do not want to think about what commands you should >>>>>>>> run, you should use autoreconf. autoreconf is the reason why the >>>>>>>> "bootstrap" script was removed. >>>>>>> Figured that out after I sent the mail :-) >>>>>>> >>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it >>>>>>>> would not make sense to remove the autotools file from the >>>>>>>> repository and ask the users who want to use the repository to run >>>>>>>> autoreconf before compiling. I do not know if it will seem >>>>>>>> acceptable to those who work from the repository. >>>>>>> Make total sense to me, would be nice with a command that does >>>>>>> something like (to simplify packaging): >>>>>>> >>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') >>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar >>>>>>> # tar -rf $XENO.tar all autoreconfed files >>>>>>> # xz $XENO.tar >>>>>> >>>>>> What is wrong with the packages generated by cgit? >>>>> Probably nothing, except that they (probably) don't contain >>>>> the files generated by autoreconf, I can of course put that into >>>>> the packaging scripts (rpm spec files). >>>> >>>> Yes, if you can. I mean, a lot of build system are doing that >>>> already anyway. >>> OK, sorry for the noise... >> >> Actually, that was an answer to the question I asked: do users prefer >> to have the generated files in the git, and your answer is yes. > May I retract that answer to a no?, having autogenerated that are out of > sync is far worse then having to make an occasional autoreconf. I have > adjusted my buildfiles to reflect this new (?) opinion. And now having problems on fedora21, probaly due to newer automake... # autoreconf ; automake --version ; autoreconf --version configure.ac:76: error: required file 'config/compile' not found configure.ac:76: 'automake --add-missing' can install 'compile' lib/boilerplate/Makefile.am:37: warning: source file 'iniparser/dictionary.c' is in a subdirectory, lib/boilerplate/Makefile.am:37: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. lib/boilerplate/Makefile.am:37: warning: source file 'iniparser/iniparser.c' is in a subdirectory, lib/boilerplate/Makefile.am:37: but option 'subdir-objects' is disabled lib/boilerplate/Makefile.am:56: warning: source file 'tlsf/tlsf.c' is in a subdirectory, lib/boilerplate/Makefile.am:56: but option 'subdir-objects' is disabled autoreconf: automake failed with exit status: 1 automake (GNU automake) 1.14.1 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by Tom Tromey <tromey@redhat.com> and Alexandre Duret-Lutz <adl@gnu.org>. autoreconf (GNU Autoconf) 2.69 Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+/Autoconf: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by David J. MacKenzie and Akim Demaille. -- Anders Blomdell Email: anders.blomdell@control.lth.se Department of Automatic Control Lund University Phone: +46 46 222 4625 P.O. Box 118 Fax: +46 46 138118 SE-221 00 Lund, Sweden ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2015-01-09 16:09 ` Anders Blomdell @ 2015-01-09 16:15 ` Gilles Chanteperdrix 2015-01-09 16:18 ` Gilles Chanteperdrix 0 siblings, 1 reply; 12+ messages in thread From: Gilles Chanteperdrix @ 2015-01-09 16:15 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Fri, Jan 09, 2015 at 05:09:55PM +0100, Anders Blomdell wrote: > On 2014-12-10 09:35, Anders Blomdell wrote: > > On 2014-12-09 20:23, Gilles Chanteperdrix wrote: > >> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote: > >>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote: > >>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: > >>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: > >>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: > >>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > >>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > >>>>>>>>> ...which leads to rtnet utils not being properly built. I think > >>>>>>>>> the following is needed: > >>>>>>>>> > >>>>>>>>> autoconf > >>>>>>>>> automake > >>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in > >>>>>>>>> git commit > >>>>>>>> > >>>>>>>> Oops. My fault. I did not commit the changes, because I do not have > >>>>>>>> the same versions of the autotools as Philippe, so the commit would > >>>>>>>> have changed all files (and at the time, I even had to comment out > >>>>>>>> some code in configure.ac to get my autotools to work, but this > >>>>>>>> issue has been resolved since then). But I forgot to tell Philippe > >>>>>>>> to bootstrap. > >>>>>>>> > >>>>>>>> Note that if you do not want to think about what commands you should > >>>>>>>> run, you should use autoreconf. autoreconf is the reason why the > >>>>>>>> "bootstrap" script was removed. > >>>>>>> Figured that out after I sent the mail :-) > >>>>>>> > >>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it > >>>>>>>> would not make sense to remove the autotools file from the > >>>>>>>> repository and ask the users who want to use the repository to run > >>>>>>>> autoreconf before compiling. I do not know if it will seem > >>>>>>>> acceptable to those who work from the repository. > >>>>>>> Make total sense to me, would be nice with a command that does > >>>>>>> something like (to simplify packaging): > >>>>>>> > >>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') > >>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar > >>>>>>> # tar -rf $XENO.tar all autoreconfed files > >>>>>>> # xz $XENO.tar > >>>>>> > >>>>>> What is wrong with the packages generated by cgit? > >>>>> Probably nothing, except that they (probably) don't contain > >>>>> the files generated by autoreconf, I can of course put that into > >>>>> the packaging scripts (rpm spec files). > >>>> > >>>> Yes, if you can. I mean, a lot of build system are doing that > >>>> already anyway. > >>> OK, sorry for the noise... > >> > >> Actually, that was an answer to the question I asked: do users prefer > >> to have the generated files in the git, and your answer is yes. > > May I retract that answer to a no?, having autogenerated that are out of > > sync is far worse then having to make an occasional autoreconf. I have > > adjusted my buildfiles to reflect this new (?) opinion. > > And now having problems on fedora21, probaly due to newer automake... > > # autoreconf ; automake --version ; autoreconf --version autoreconf -fi, to avoid problems with mixed file versions. -- Gilles. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf... 2015-01-09 16:15 ` Gilles Chanteperdrix @ 2015-01-09 16:18 ` Gilles Chanteperdrix 0 siblings, 0 replies; 12+ messages in thread From: Gilles Chanteperdrix @ 2015-01-09 16:18 UTC (permalink / raw) To: Anders Blomdell; +Cc: Xenomai On Fri, Jan 09, 2015 at 05:15:48PM +0100, Gilles Chanteperdrix wrote: > On Fri, Jan 09, 2015 at 05:09:55PM +0100, Anders Blomdell wrote: > > On 2014-12-10 09:35, Anders Blomdell wrote: > > > On 2014-12-09 20:23, Gilles Chanteperdrix wrote: > > >> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote: > > >>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote: > > >>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote: > > >>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote: > > >>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote: > > >>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote: > > >>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote: > > >>>>>>>>> ...which leads to rtnet utils not being properly built. I think > > >>>>>>>>> the following is needed: > > >>>>>>>>> > > >>>>>>>>> autoconf > > >>>>>>>>> automake > > >>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in > > >>>>>>>>> git commit > > >>>>>>>> > > >>>>>>>> Oops. My fault. I did not commit the changes, because I do not have > > >>>>>>>> the same versions of the autotools as Philippe, so the commit would > > >>>>>>>> have changed all files (and at the time, I even had to comment out > > >>>>>>>> some code in configure.ac to get my autotools to work, but this > > >>>>>>>> issue has been resolved since then). But I forgot to tell Philippe > > >>>>>>>> to bootstrap. > > >>>>>>>> > > >>>>>>>> Note that if you do not want to think about what commands you should > > >>>>>>>> run, you should use autoreconf. autoreconf is the reason why the > > >>>>>>>> "bootstrap" script was removed. > > >>>>>>> Figured that out after I sent the mail :-) > > >>>>>>> > > >>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it > > >>>>>>>> would not make sense to remove the autotools file from the > > >>>>>>>> repository and ask the users who want to use the repository to run > > >>>>>>>> autoreconf before compiling. I do not know if it will seem > > >>>>>>>> acceptable to those who work from the repository. > > >>>>>>> Make total sense to me, would be nice with a command that does > > >>>>>>> something like (to simplify packaging): > > >>>>>>> > > >>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/') > > >>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar > > >>>>>>> # tar -rf $XENO.tar all autoreconfed files > > >>>>>>> # xz $XENO.tar > > >>>>>> > > >>>>>> What is wrong with the packages generated by cgit? > > >>>>> Probably nothing, except that they (probably) don't contain > > >>>>> the files generated by autoreconf, I can of course put that into > > >>>>> the packaging scripts (rpm spec files). > > >>>> > > >>>> Yes, if you can. I mean, a lot of build system are doing that > > >>>> already anyway. > > >>> OK, sorry for the noise... > > >> > > >> Actually, that was an answer to the question I asked: do users prefer > > >> to have the generated files in the git, and your answer is yes. > > > May I retract that answer to a no?, having autogenerated that are out of > > > sync is far worse then having to make an occasional autoreconf. I have > > > adjusted my buildfiles to reflect this new (?) opinion. > > > > And now having problems on fedora21, probaly due to newer automake... > > > > # autoreconf ; automake --version ; autoreconf --version > > autoreconf -fi, to avoid problems with mixed file versions. Which scripts/bootstrap does by the way. -- Gilles. ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-01-09 16:18 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-12-08 11:47 [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf Anders Blomdell 2014-12-09 12:43 ` Gilles Chanteperdrix 2014-12-09 15:19 ` Anders Blomdell 2014-12-09 15:26 ` Gilles Chanteperdrix 2014-12-09 15:32 ` Anders Blomdell 2014-12-09 15:33 ` Gilles Chanteperdrix 2014-12-09 17:25 ` Anders Blomdell 2014-12-09 19:23 ` Gilles Chanteperdrix 2014-12-10 8:35 ` Anders Blomdell 2015-01-09 16:09 ` Anders Blomdell 2015-01-09 16:15 ` Gilles Chanteperdrix 2015-01-09 16:18 ` Gilles Chanteperdrix
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.