* [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
@ 2014-12-08 11:47 Anders Blomdell
2014-12-09 12:43 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2014-12-08 11:47 UTC (permalink / raw)
To: Xenomai
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
...which leads to rtnet utils not being properly built. I think
the following is needed:
autoconf
automake
git add configure utils/Makefile.in utils/net/Makefile.in
git commit
/Anders
- --
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJUhY/KAAoJENZYyvaDG8Nc+z8H/351Q2joGXsGiREV6giprokC
xhFpFIDl0lMtsha5PQpTf6AnY1Bau++HnuiWObiIFPd134IriNSCaT/g0NG//76U
oUQUAG24XGTW5pGvXkczM/rnlrD7Pd6QYpbTU9sjubCp/Bs3UXVNHxZEQl6auYDs
/MY5h+NS1FY4IA8Zc/GIa4jprUQ+4Dm4UAgAvvxTH7cA3y+PC6YheCSUYXk74FDo
6H7cfbnW/cago1DPvLPFDJkFofigjTP0cnmSHR3gFDoRleTZaXHck3D1bRSmTr01
SknuhOg5UiniHxN0pzugXI8qc1wGCCTgT6CWmei+ClLWkktX9KseYpw9kjrkDHI=
=PFzc
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-08 11:47 [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf Anders Blomdell
@ 2014-12-09 12:43 ` Gilles Chanteperdrix
2014-12-09 15:19 ` Anders Blomdell
0 siblings, 1 reply; 12+ messages in thread
From: Gilles Chanteperdrix @ 2014-12-09 12:43 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> ...which leads to rtnet utils not being properly built. I think
> the following is needed:
>
> autoconf
> automake
> git add configure utils/Makefile.in utils/net/Makefile.in
> git commit
Oops. My fault. I did not commit the changes, because I do not have
the same versions of the autotools as Philippe, so the commit would
have changed all files (and at the time, I even had to comment out
some code in configure.ac to get my autotools to work, but this
issue has been resolved since then). But I forgot to tell Philippe
to bootstrap.
Note that if you do not want to think about what commands you should
run, you should use autoreconf. autoreconf is the reason why the
"bootstrap" script was removed.
I wonder if as long as Xenomai 3 is in its development stage, it
would not make sense to remove the autotools file from the
repository and ask the users who want to use the repository to run
autoreconf before compiling. I do not know if it will seem
acceptable to those who work from the repository.
--
Gilles.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 173 bytes
Desc: not available
URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/0181fcb9/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 12:43 ` Gilles Chanteperdrix
@ 2014-12-09 15:19 ` Anders Blomdell
2014-12-09 15:26 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2014-12-09 15:19 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: Xenomai
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
>> ...which leads to rtnet utils not being properly built. I think
>> the following is needed:
>>
>> autoconf
>> automake
>> git add configure utils/Makefile.in utils/net/Makefile.in
>> git commit
>
> Oops. My fault. I did not commit the changes, because I do not have
> the same versions of the autotools as Philippe, so the commit would
> have changed all files (and at the time, I even had to comment out
> some code in configure.ac to get my autotools to work, but this
> issue has been resolved since then). But I forgot to tell Philippe
> to bootstrap.
>
> Note that if you do not want to think about what commands you should
> run, you should use autoreconf. autoreconf is the reason why the
> "bootstrap" script was removed.
Figured that out after I sent the mail :-)
> I wonder if as long as Xenomai 3 is in its development stage, it
> would not make sense to remove the autotools file from the
> repository and ask the users who want to use the repository to run
> autoreconf before compiling. I do not know if it will seem
> acceptable to those who work from the repository.
Make total sense to me, would be nice with a command that does
something like (to simplify packaging):
# XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
# git archive --prefix $XENO/ HEAD -o $XENO.tar
# tar -rf $XENO.tar all autoreconfed files
# xz $XENO.tar
/Anders
- --
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJUhxMTAAoJENZYyvaDG8NcQT8H/REi1/+u9aFcIxoeNyT9a2tm
nPtdGAsUFfEOEUugiedjb7J7knE2PZwptSP7RqOi4jYhScKWDJyyVVb4CCvqOjbe
wcR4e86dtDCV101mkDdS+Fgp5oo6rDTZyM0zR4Io1gp3JHsbvORMo4HmYo3EbNfj
t2w8XzIXlign73lTH1/m9OPU0X/TDOL4dTVEGZHG43pIAl6H6B9D3lMoGTbTWXW2
1YvnDzVRucblCcaX7jXdvbB6DPYH24q9ikaJFJ8/LkGyXjdWGuMfGgKoUmCCUajd
moicW5vcbma76xdbzgZjc1TRMfD8WaJQY/oYEr5WRrvIXJYalebGC9O2kKuX9Ww=
=Y+k4
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 15:19 ` Anders Blomdell
@ 2014-12-09 15:26 ` Gilles Chanteperdrix
2014-12-09 15:32 ` Anders Blomdell
0 siblings, 1 reply; 12+ messages in thread
From: Gilles Chanteperdrix @ 2014-12-09 15:26 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> > On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> >> ...which leads to rtnet utils not being properly built. I think
> >> the following is needed:
> >>
> >> autoconf
> >> automake
> >> git add configure utils/Makefile.in utils/net/Makefile.in
> >> git commit
> >
> > Oops. My fault. I did not commit the changes, because I do not have
> > the same versions of the autotools as Philippe, so the commit would
> > have changed all files (and at the time, I even had to comment out
> > some code in configure.ac to get my autotools to work, but this
> > issue has been resolved since then). But I forgot to tell Philippe
> > to bootstrap.
> >
> > Note that if you do not want to think about what commands you should
> > run, you should use autoreconf. autoreconf is the reason why the
> > "bootstrap" script was removed.
> Figured that out after I sent the mail :-)
>
> > I wonder if as long as Xenomai 3 is in its development stage, it
> > would not make sense to remove the autotools file from the
> > repository and ask the users who want to use the repository to run
> > autoreconf before compiling. I do not know if it will seem
> > acceptable to those who work from the repository.
> Make total sense to me, would be nice with a command that does
> something like (to simplify packaging):
>
> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
> # git archive --prefix $XENO/ HEAD -o $XENO.tar
> # tar -rf $XENO.tar all autoreconfed files
> # xz $XENO.tar
What is wrong with the packages generated by cgit?
--
Gilles.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 173 bytes
Desc: not available
URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/319a57fb/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 15:26 ` Gilles Chanteperdrix
@ 2014-12-09 15:32 ` Anders Blomdell
2014-12-09 15:33 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2014-12-09 15:32 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: Xenomai
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
>>>> ...which leads to rtnet utils not being properly built. I think
>>>> the following is needed:
>>>>
>>>> autoconf
>>>> automake
>>>> git add configure utils/Makefile.in utils/net/Makefile.in
>>>> git commit
>>>
>>> Oops. My fault. I did not commit the changes, because I do not have
>>> the same versions of the autotools as Philippe, so the commit would
>>> have changed all files (and at the time, I even had to comment out
>>> some code in configure.ac to get my autotools to work, but this
>>> issue has been resolved since then). But I forgot to tell Philippe
>>> to bootstrap.
>>>
>>> Note that if you do not want to think about what commands you should
>>> run, you should use autoreconf. autoreconf is the reason why the
>>> "bootstrap" script was removed.
>> Figured that out after I sent the mail :-)
>>
>>> I wonder if as long as Xenomai 3 is in its development stage, it
>>> would not make sense to remove the autotools file from the
>>> repository and ask the users who want to use the repository to run
>>> autoreconf before compiling. I do not know if it will seem
>>> acceptable to those who work from the repository.
>> Make total sense to me, would be nice with a command that does
>> something like (to simplify packaging):
>>
>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
>> # tar -rf $XENO.tar all autoreconfed files
>> # xz $XENO.tar
>
> What is wrong with the packages generated by cgit?
Probably nothing, except that they (probably) don't contain
the files generated by autoreconf, I can of course put that into
the packaging scripts (rpm spec files).
/Anders
- --
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJUhxX3AAoJENZYyvaDG8NcfD4H/AtauCiybhsKs9tgrSORnvr1
rHKYtL/PDyr2ELpoz2G739huJ9+t+YJUznJAmBrWs2OPFZJhqwdq8FRxWFoTOJyJ
jcVhWd5qDbHjD0jdsOUlxyVyH+Wo36D2bpTw+AIsmKE3x34DWKakkVkMFY3RSa/z
QOvpEUzMcLAyW3fbdNKRE/JPc9oRcbniooUD7M1kLsvDvyrjOEO/VA3idwn7FoGG
kiONj9ovgdSeldSefA34EEgr8cOz8vDv7YKdgEzduPmoKKkb6Wv1F5AE6JuzR3kO
Ypf2FChDozb3Q7iySGl8fnZHnu2vPYyGihPvoJBHIRAixfy/5MRPxNluG/mLzCo=
=k2Yc
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 15:32 ` Anders Blomdell
@ 2014-12-09 15:33 ` Gilles Chanteperdrix
2014-12-09 17:25 ` Anders Blomdell
0 siblings, 1 reply; 12+ messages in thread
From: Gilles Chanteperdrix @ 2014-12-09 15:33 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
> > On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
> >> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> >>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> >>>> ...which leads to rtnet utils not being properly built. I think
> >>>> the following is needed:
> >>>>
> >>>> autoconf
> >>>> automake
> >>>> git add configure utils/Makefile.in utils/net/Makefile.in
> >>>> git commit
> >>>
> >>> Oops. My fault. I did not commit the changes, because I do not have
> >>> the same versions of the autotools as Philippe, so the commit would
> >>> have changed all files (and at the time, I even had to comment out
> >>> some code in configure.ac to get my autotools to work, but this
> >>> issue has been resolved since then). But I forgot to tell Philippe
> >>> to bootstrap.
> >>>
> >>> Note that if you do not want to think about what commands you should
> >>> run, you should use autoreconf. autoreconf is the reason why the
> >>> "bootstrap" script was removed.
> >> Figured that out after I sent the mail :-)
> >>
> >>> I wonder if as long as Xenomai 3 is in its development stage, it
> >>> would not make sense to remove the autotools file from the
> >>> repository and ask the users who want to use the repository to run
> >>> autoreconf before compiling. I do not know if it will seem
> >>> acceptable to those who work from the repository.
> >> Make total sense to me, would be nice with a command that does
> >> something like (to simplify packaging):
> >>
> >> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
> >> # git archive --prefix $XENO/ HEAD -o $XENO.tar
> >> # tar -rf $XENO.tar all autoreconfed files
> >> # xz $XENO.tar
> >
> > What is wrong with the packages generated by cgit?
> Probably nothing, except that they (probably) don't contain
> the files generated by autoreconf, I can of course put that into
> the packaging scripts (rpm spec files).
Yes, if you can. I mean, a lot of build system are doing that
already anyway.
--
Gilles.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 173 bytes
Desc: not available
URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/eb820f10/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 15:33 ` Gilles Chanteperdrix
@ 2014-12-09 17:25 ` Anders Blomdell
2014-12-09 19:23 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2014-12-09 17:25 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: Xenomai
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
>>>>>> ...which leads to rtnet utils not being properly built. I think
>>>>>> the following is needed:
>>>>>>
>>>>>> autoconf
>>>>>> automake
>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
>>>>>> git commit
>>>>>
>>>>> Oops. My fault. I did not commit the changes, because I do not have
>>>>> the same versions of the autotools as Philippe, so the commit would
>>>>> have changed all files (and at the time, I even had to comment out
>>>>> some code in configure.ac to get my autotools to work, but this
>>>>> issue has been resolved since then). But I forgot to tell Philippe
>>>>> to bootstrap.
>>>>>
>>>>> Note that if you do not want to think about what commands you should
>>>>> run, you should use autoreconf. autoreconf is the reason why the
>>>>> "bootstrap" script was removed.
>>>> Figured that out after I sent the mail :-)
>>>>
>>>>> I wonder if as long as Xenomai 3 is in its development stage, it
>>>>> would not make sense to remove the autotools file from the
>>>>> repository and ask the users who want to use the repository to run
>>>>> autoreconf before compiling. I do not know if it will seem
>>>>> acceptable to those who work from the repository.
>>>> Make total sense to me, would be nice with a command that does
>>>> something like (to simplify packaging):
>>>>
>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
>>>> # tar -rf $XENO.tar all autoreconfed files
>>>> # xz $XENO.tar
>>>
>>> What is wrong with the packages generated by cgit?
>> Probably nothing, except that they (probably) don't contain
>> the files generated by autoreconf, I can of course put that into
>> the packaging scripts (rpm spec files).
>
> Yes, if you can. I mean, a lot of build system are doing that
> already anyway.
OK, sorry for the noise...
/Anders
- --
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAEBAgAGBQJUhzCcAAoJENZYyvaDG8Nc9jgH/2fHd88/HwcT+aW3rJTvFgu4
2bOlGTJYcktO+YoWPyLWCUYKUvedIYBls07I/STWNoIdP+F1+H0sqWXOKPif2Clx
sqFNIYebD9g0FVkXwMN7v4gknIWpBw/Hx0m7KnERy+IsU7ouqGxkrp0zIIAbM5KM
uIJWtUTIV50GTdsUr1CaNx08KMW2IouGkMbyhZjGp1rC+cZZCe43wZMCfu26BgG2
5FcHZWc8HGxQ03hgMidInFHQJDJkbMD9E9MrEwaiQE4mWOd/BoUtPHlgss/wqy4P
QKuo4iY4JupWnKCsxQyfkU+lYOtnbnIBMQKXMpt1dJlrmCPIKZOskRPE3JNcV94=
=2r5W
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 17:25 ` Anders Blomdell
@ 2014-12-09 19:23 ` Gilles Chanteperdrix
2014-12-10 8:35 ` Anders Blomdell
0 siblings, 1 reply; 12+ messages in thread
From: Gilles Chanteperdrix @ 2014-12-09 19:23 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote:
> On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
> > On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
> >> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
> >>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
> >>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> >>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> >>>>>> ...which leads to rtnet utils not being properly built. I think
> >>>>>> the following is needed:
> >>>>>>
> >>>>>> autoconf
> >>>>>> automake
> >>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
> >>>>>> git commit
> >>>>>
> >>>>> Oops. My fault. I did not commit the changes, because I do not have
> >>>>> the same versions of the autotools as Philippe, so the commit would
> >>>>> have changed all files (and at the time, I even had to comment out
> >>>>> some code in configure.ac to get my autotools to work, but this
> >>>>> issue has been resolved since then). But I forgot to tell Philippe
> >>>>> to bootstrap.
> >>>>>
> >>>>> Note that if you do not want to think about what commands you should
> >>>>> run, you should use autoreconf. autoreconf is the reason why the
> >>>>> "bootstrap" script was removed.
> >>>> Figured that out after I sent the mail :-)
> >>>>
> >>>>> I wonder if as long as Xenomai 3 is in its development stage, it
> >>>>> would not make sense to remove the autotools file from the
> >>>>> repository and ask the users who want to use the repository to run
> >>>>> autoreconf before compiling. I do not know if it will seem
> >>>>> acceptable to those who work from the repository.
> >>>> Make total sense to me, would be nice with a command that does
> >>>> something like (to simplify packaging):
> >>>>
> >>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
> >>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
> >>>> # tar -rf $XENO.tar all autoreconfed files
> >>>> # xz $XENO.tar
> >>>
> >>> What is wrong with the packages generated by cgit?
> >> Probably nothing, except that they (probably) don't contain
> >> the files generated by autoreconf, I can of course put that into
> >> the packaging scripts (rpm spec files).
> >
> > Yes, if you can. I mean, a lot of build system are doing that
> > already anyway.
> OK, sorry for the noise...
Actually, that was an answer to the question I asked: do users prefer
to have the generated files in the git, and your answer is yes.
--
Gilles.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 173 bytes
Desc: not available
URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20141209/39a4ed72/attachment.sig>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-09 19:23 ` Gilles Chanteperdrix
@ 2014-12-10 8:35 ` Anders Blomdell
2015-01-09 16:09 ` Anders Blomdell
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2014-12-10 8:35 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: Xenomai
On 2014-12-09 20:23, Gilles Chanteperdrix wrote:
> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote:
>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
>>>>>>>> ...which leads to rtnet utils not being properly built. I think
>>>>>>>> the following is needed:
>>>>>>>>
>>>>>>>> autoconf
>>>>>>>> automake
>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
>>>>>>>> git commit
>>>>>>>
>>>>>>> Oops. My fault. I did not commit the changes, because I do not have
>>>>>>> the same versions of the autotools as Philippe, so the commit would
>>>>>>> have changed all files (and at the time, I even had to comment out
>>>>>>> some code in configure.ac to get my autotools to work, but this
>>>>>>> issue has been resolved since then). But I forgot to tell Philippe
>>>>>>> to bootstrap.
>>>>>>>
>>>>>>> Note that if you do not want to think about what commands you should
>>>>>>> run, you should use autoreconf. autoreconf is the reason why the
>>>>>>> "bootstrap" script was removed.
>>>>>> Figured that out after I sent the mail :-)
>>>>>>
>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it
>>>>>>> would not make sense to remove the autotools file from the
>>>>>>> repository and ask the users who want to use the repository to run
>>>>>>> autoreconf before compiling. I do not know if it will seem
>>>>>>> acceptable to those who work from the repository.
>>>>>> Make total sense to me, would be nice with a command that does
>>>>>> something like (to simplify packaging):
>>>>>>
>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
>>>>>> # tar -rf $XENO.tar all autoreconfed files
>>>>>> # xz $XENO.tar
>>>>>
>>>>> What is wrong with the packages generated by cgit?
>>>> Probably nothing, except that they (probably) don't contain
>>>> the files generated by autoreconf, I can of course put that into
>>>> the packaging scripts (rpm spec files).
>>>
>>> Yes, if you can. I mean, a lot of build system are doing that
>>> already anyway.
>> OK, sorry for the noise...
>
> Actually, that was an answer to the question I asked: do users prefer
> to have the generated files in the git, and your answer is yes.
May I retract that answer to a no?, having autogenerated that are out of
sync is far worse then having to make an occasional autoreconf. I have
adjusted my buildfiles to reflect this new (?) opinion.
Regards
/Anders
--
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2014-12-10 8:35 ` Anders Blomdell
@ 2015-01-09 16:09 ` Anders Blomdell
2015-01-09 16:15 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Anders Blomdell @ 2015-01-09 16:09 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: Xenomai
On 2014-12-10 09:35, Anders Blomdell wrote:
> On 2014-12-09 20:23, Gilles Chanteperdrix wrote:
>> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote:
>>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
>>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
>>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
>>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
>>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
>>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
>>>>>>>>> ...which leads to rtnet utils not being properly built. I think
>>>>>>>>> the following is needed:
>>>>>>>>>
>>>>>>>>> autoconf
>>>>>>>>> automake
>>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
>>>>>>>>> git commit
>>>>>>>>
>>>>>>>> Oops. My fault. I did not commit the changes, because I do not have
>>>>>>>> the same versions of the autotools as Philippe, so the commit would
>>>>>>>> have changed all files (and at the time, I even had to comment out
>>>>>>>> some code in configure.ac to get my autotools to work, but this
>>>>>>>> issue has been resolved since then). But I forgot to tell Philippe
>>>>>>>> to bootstrap.
>>>>>>>>
>>>>>>>> Note that if you do not want to think about what commands you should
>>>>>>>> run, you should use autoreconf. autoreconf is the reason why the
>>>>>>>> "bootstrap" script was removed.
>>>>>>> Figured that out after I sent the mail :-)
>>>>>>>
>>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it
>>>>>>>> would not make sense to remove the autotools file from the
>>>>>>>> repository and ask the users who want to use the repository to run
>>>>>>>> autoreconf before compiling. I do not know if it will seem
>>>>>>>> acceptable to those who work from the repository.
>>>>>>> Make total sense to me, would be nice with a command that does
>>>>>>> something like (to simplify packaging):
>>>>>>>
>>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
>>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
>>>>>>> # tar -rf $XENO.tar all autoreconfed files
>>>>>>> # xz $XENO.tar
>>>>>>
>>>>>> What is wrong with the packages generated by cgit?
>>>>> Probably nothing, except that they (probably) don't contain
>>>>> the files generated by autoreconf, I can of course put that into
>>>>> the packaging scripts (rpm spec files).
>>>>
>>>> Yes, if you can. I mean, a lot of build system are doing that
>>>> already anyway.
>>> OK, sorry for the noise...
>>
>> Actually, that was an answer to the question I asked: do users prefer
>> to have the generated files in the git, and your answer is yes.
> May I retract that answer to a no?, having autogenerated that are out of
> sync is far worse then having to make an occasional autoreconf. I have
> adjusted my buildfiles to reflect this new (?) opinion.
And now having problems on fedora21, probaly due to newer automake...
# autoreconf ; automake --version ; autoreconf --version
configure.ac:76: error: required file 'config/compile' not found
configure.ac:76: 'automake --add-missing' can install 'compile'
lib/boilerplate/Makefile.am:37: warning: source file 'iniparser/dictionary.c' is in a subdirectory,
lib/boilerplate/Makefile.am:37: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
lib/boilerplate/Makefile.am:37: warning: source file 'iniparser/iniparser.c' is in a subdirectory,
lib/boilerplate/Makefile.am:37: but option 'subdir-objects' is disabled
lib/boilerplate/Makefile.am:56: warning: source file 'tlsf/tlsf.c' is in a subdirectory,
lib/boilerplate/Makefile.am:56: but option 'subdir-objects' is disabled
autoreconf: automake failed with exit status: 1
automake (GNU automake) 1.14.1
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Tom Tromey <tromey@redhat.com>
and Alexandre Duret-Lutz <adl@gnu.org>.
autoreconf (GNU Autoconf) 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+/Autoconf: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by David J. MacKenzie and Akim Demaille.
--
Anders Blomdell Email: anders.blomdell@control.lth.se
Department of Automatic Control
Lund University Phone: +46 46 222 4625
P.O. Box 118 Fax: +46 46 138118
SE-221 00 Lund, Sweden
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2015-01-09 16:09 ` Anders Blomdell
@ 2015-01-09 16:15 ` Gilles Chanteperdrix
2015-01-09 16:18 ` Gilles Chanteperdrix
0 siblings, 1 reply; 12+ messages in thread
From: Gilles Chanteperdrix @ 2015-01-09 16:15 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Fri, Jan 09, 2015 at 05:09:55PM +0100, Anders Blomdell wrote:
> On 2014-12-10 09:35, Anders Blomdell wrote:
> > On 2014-12-09 20:23, Gilles Chanteperdrix wrote:
> >> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote:
> >>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
> >>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
> >>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
> >>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
> >>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> >>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> >>>>>>>>> ...which leads to rtnet utils not being properly built. I think
> >>>>>>>>> the following is needed:
> >>>>>>>>>
> >>>>>>>>> autoconf
> >>>>>>>>> automake
> >>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
> >>>>>>>>> git commit
> >>>>>>>>
> >>>>>>>> Oops. My fault. I did not commit the changes, because I do not have
> >>>>>>>> the same versions of the autotools as Philippe, so the commit would
> >>>>>>>> have changed all files (and at the time, I even had to comment out
> >>>>>>>> some code in configure.ac to get my autotools to work, but this
> >>>>>>>> issue has been resolved since then). But I forgot to tell Philippe
> >>>>>>>> to bootstrap.
> >>>>>>>>
> >>>>>>>> Note that if you do not want to think about what commands you should
> >>>>>>>> run, you should use autoreconf. autoreconf is the reason why the
> >>>>>>>> "bootstrap" script was removed.
> >>>>>>> Figured that out after I sent the mail :-)
> >>>>>>>
> >>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it
> >>>>>>>> would not make sense to remove the autotools file from the
> >>>>>>>> repository and ask the users who want to use the repository to run
> >>>>>>>> autoreconf before compiling. I do not know if it will seem
> >>>>>>>> acceptable to those who work from the repository.
> >>>>>>> Make total sense to me, would be nice with a command that does
> >>>>>>> something like (to simplify packaging):
> >>>>>>>
> >>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
> >>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
> >>>>>>> # tar -rf $XENO.tar all autoreconfed files
> >>>>>>> # xz $XENO.tar
> >>>>>>
> >>>>>> What is wrong with the packages generated by cgit?
> >>>>> Probably nothing, except that they (probably) don't contain
> >>>>> the files generated by autoreconf, I can of course put that into
> >>>>> the packaging scripts (rpm spec files).
> >>>>
> >>>> Yes, if you can. I mean, a lot of build system are doing that
> >>>> already anyway.
> >>> OK, sorry for the noise...
> >>
> >> Actually, that was an answer to the question I asked: do users prefer
> >> to have the generated files in the git, and your answer is yes.
> > May I retract that answer to a no?, having autogenerated that are out of
> > sync is far worse then having to make an occasional autoreconf. I have
> > adjusted my buildfiles to reflect this new (?) opinion.
>
> And now having problems on fedora21, probaly due to newer automake...
>
> # autoreconf ; automake --version ; autoreconf --version
autoreconf -fi, to avoid problems with mixed file versions.
--
Gilles.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf...
2015-01-09 16:15 ` Gilles Chanteperdrix
@ 2015-01-09 16:18 ` Gilles Chanteperdrix
0 siblings, 0 replies; 12+ messages in thread
From: Gilles Chanteperdrix @ 2015-01-09 16:18 UTC (permalink / raw)
To: Anders Blomdell; +Cc: Xenomai
On Fri, Jan 09, 2015 at 05:15:48PM +0100, Gilles Chanteperdrix wrote:
> On Fri, Jan 09, 2015 at 05:09:55PM +0100, Anders Blomdell wrote:
> > On 2014-12-10 09:35, Anders Blomdell wrote:
> > > On 2014-12-09 20:23, Gilles Chanteperdrix wrote:
> > >> On Tue, Dec 09, 2014 at 06:25:50PM +0100, Anders Blomdell wrote:
> > >>> On 2014-12-09 16:33, Gilles Chanteperdrix wrote:
> > >>>> On Tue, Dec 09, 2014 at 04:32:10PM +0100, Anders Blomdell wrote:
> > >>>>> On 2014-12-09 16:26, Gilles Chanteperdrix wrote:
> > >>>>>> On Tue, Dec 09, 2014 at 04:19:49PM +0100, Anders Blomdell wrote:
> > >>>>>>> On 2014-12-09 13:43, Gilles Chanteperdrix wrote:
> > >>>>>>>> On Mon, Dec 08, 2014 at 12:47:24PM +0100, Anders Blomdell wrote:
> > >>>>>>>>> ...which leads to rtnet utils not being properly built. I think
> > >>>>>>>>> the following is needed:
> > >>>>>>>>>
> > >>>>>>>>> autoconf
> > >>>>>>>>> automake
> > >>>>>>>>> git add configure utils/Makefile.in utils/net/Makefile.in
> > >>>>>>>>> git commit
> > >>>>>>>>
> > >>>>>>>> Oops. My fault. I did not commit the changes, because I do not have
> > >>>>>>>> the same versions of the autotools as Philippe, so the commit would
> > >>>>>>>> have changed all files (and at the time, I even had to comment out
> > >>>>>>>> some code in configure.ac to get my autotools to work, but this
> > >>>>>>>> issue has been resolved since then). But I forgot to tell Philippe
> > >>>>>>>> to bootstrap.
> > >>>>>>>>
> > >>>>>>>> Note that if you do not want to think about what commands you should
> > >>>>>>>> run, you should use autoreconf. autoreconf is the reason why the
> > >>>>>>>> "bootstrap" script was removed.
> > >>>>>>> Figured that out after I sent the mail :-)
> > >>>>>>>
> > >>>>>>>> I wonder if as long as Xenomai 3 is in its development stage, it
> > >>>>>>>> would not make sense to remove the autotools file from the
> > >>>>>>>> repository and ask the users who want to use the repository to run
> > >>>>>>>> autoreconf before compiling. I do not know if it will seem
> > >>>>>>>> acceptable to those who work from the repository.
> > >>>>>>> Make total sense to me, would be nice with a command that does
> > >>>>>>> something like (to simplify packaging):
> > >>>>>>>
> > >>>>>>> # XENO=$(git describe --tags | sed -e 's/v/xenomai-/')
> > >>>>>>> # git archive --prefix $XENO/ HEAD -o $XENO.tar
> > >>>>>>> # tar -rf $XENO.tar all autoreconfed files
> > >>>>>>> # xz $XENO.tar
> > >>>>>>
> > >>>>>> What is wrong with the packages generated by cgit?
> > >>>>> Probably nothing, except that they (probably) don't contain
> > >>>>> the files generated by autoreconf, I can of course put that into
> > >>>>> the packaging scripts (rpm spec files).
> > >>>>
> > >>>> Yes, if you can. I mean, a lot of build system are doing that
> > >>>> already anyway.
> > >>> OK, sorry for the noise...
> > >>
> > >> Actually, that was an answer to the question I asked: do users prefer
> > >> to have the generated files in the git, and your answer is yes.
> > > May I retract that answer to a no?, having autogenerated that are out of
> > > sync is far worse then having to make an occasional autoreconf. I have
> > > adjusted my buildfiles to reflect this new (?) opinion.
> >
> > And now having problems on fedora21, probaly due to newer automake...
> >
> > # autoreconf ; automake --version ; autoreconf --version
>
> autoreconf -fi, to avoid problems with mixed file versions.
Which scripts/bootstrap does by the way.
--
Gilles.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-01-09 16:18 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-08 11:47 [Xenomai] xenomai-3/next is out of sync with regards to automake/autoconf Anders Blomdell
2014-12-09 12:43 ` Gilles Chanteperdrix
2014-12-09 15:19 ` Anders Blomdell
2014-12-09 15:26 ` Gilles Chanteperdrix
2014-12-09 15:32 ` Anders Blomdell
2014-12-09 15:33 ` Gilles Chanteperdrix
2014-12-09 17:25 ` Anders Blomdell
2014-12-09 19:23 ` Gilles Chanteperdrix
2014-12-10 8:35 ` Anders Blomdell
2015-01-09 16:09 ` Anders Blomdell
2015-01-09 16:15 ` Gilles Chanteperdrix
2015-01-09 16:18 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.