All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Paris <david.paris@st.com>
To: Lee Jones <lee.jones@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <kernel@stlinux.com>, <a.zummo@towertech.it>,
	<rtc-linux@googlegroups.com>, <wim@iguana.be>,
	<linux-watchdog@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Mon, 15 Dec 2014 13:52:50 +0100	[thread overview]
Message-ID: <548ED9A2.5060403@st.com> (raw)
In-Reply-To: <1418642738-17407-7-git-send-email-lee.jones@linaro.org>

Hi Lee,

     Something I didn't pointed out before, this driver is only supposed 
to support LPC_0 for stih407. The enable mask is only coded for LPC_0. 
Is it a wanted behavior ?

     In our current implementation here in ST is that LPC_0 is for A9 
Watchdog and LPC_1 for A9 global timer. This has been translated in the 
driver by hardcoding enable mask of LPC watchdog to only support LPC_0. 
But do we want to have a more generic driver to be applicable both for 
LPC_0 and LPC_1 ?

     David

On 12/15/2014 12:25 PM, Lee Jones wrote:
> Signed-off-by: David Paris <david.paris@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>   drivers/watchdog/Kconfig  |  13 ++
>   drivers/watchdog/Makefile |   1 +
>   drivers/watchdog/st_wdt.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 326 insertions(+)
>   create mode 100644 drivers/watchdog/st_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312f..5a538af 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -432,6 +432,19 @@ config SIRFSOC_WATCHDOG
>   	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
>   	  the watchdog triggers the system will be reset.
>   
> +config ST_WATCHDOG
> +	tristate "STMicroelectronics LPC Watchdog"
> +	depends on ARCH_STI
> +	depends on OF
> +	select WATCHDOG_CORE
> +	select MFD_ST_LPC
> +	help
> +	  Say Y here to include STMicroelectronics Low Power Controller
> +	  (LPC) based Watchdog timer support.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called st_wdt.
> +
>   config TEGRA_WATCHDOG
>   	tristate "Tegra watchdog"
>   	depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..eb19937 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>   obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
>   obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>   obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_WATCHDOG) += st_wdt.o
>   obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
>   obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>   
> diff --git a/drivers/watchdog/st_wdt.c b/drivers/watchdog/st_wdt.c
> new file mode 100644
> index 0000000..7e06f15
> --- /dev/null
> +++ b/drivers/watchdog/st_wdt.c
> @@ -0,0 +1,312 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog
> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris@st.com> for STMicroelectronics
> + *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/* Low Power Alarm */
> +#define LPC_LPA_LSB_OFF			0x410
> +#define LPC_LPA_START_OFF		0x418
> +
> +/* LPC as WDT */
> +#define LPC_WDT_OFF			0x510
> +
> +struct st_wdog_syscfg {
> +	struct regmap *regmap;
> +	unsigned int reset_type_reg;
> +	unsigned int reset_type_mask;
> +	unsigned int enable_reg;
> +	unsigned int enable_mask;
> +};
> +
> +struct st_wdog {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct st_wdog_syscfg *syscfg;
> +	struct clk *clk;
> +	int warm_reset;
> +};
> +
> +static struct st_wdog_syscfg stid127_syscfg = {
> +	.reset_type_reg		= 0x004,
> +	.reset_type_mask	= BIT(2),
> +	.enable_reg		= 0x000,
> +	.enable_mask		= BIT(2),
> +};
> +
> +static struct st_wdog_syscfg stih415_syscfg = {
> +	.reset_type_reg		= 0x0B8,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x0B4,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih416_syscfg = {
> +	.reset_type_reg		= 0x88C,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x888,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih407_syscfg = {
> +	.enable_reg		= 0x204,
> +	.enable_mask		= BIT(19),
> +};
> +
> +static struct of_device_id st_wdog_match[] = {
> +	{
> +		.compatible = "st,stih407-lpc",
> +		.data = (void *)&stih407_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih416-lpc",
> +		.data = (void *)&stih416_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih415-lpc",
> +		.data = (void *)&stih415_syscfg,
> +	},
> +	{
> +		.compatible = "st,stid127-lpc",
> +		.data = (void *)&stid127_syscfg,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, st_wdog_match);
> +
> +static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
> +{
> +	/* Type of watchdog reset - 0: Cold 1: Warm */
> +	if (st_wdog->syscfg->reset_type_reg)
> +		regmap_update_bits(st_wdog->syscfg->regmap,
> +				   st_wdog->syscfg->reset_type_reg,
> +				   st_wdog->syscfg->reset_type_mask,
> +				   st_wdog->warm_reset);
> +
> +	/* Mask/unmask watchdog reset */
> +	regmap_update_bits(st_wdog->syscfg->regmap,
> +			   st_wdog->syscfg->enable_reg,
> +			   st_wdog->syscfg->enable_mask,
> +			   enable ? 0 : st_wdog->syscfg->enable_mask);
> +}
> +
> +static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
> +{
> +	unsigned long clkrate = clk_get_rate(st_wdog->clk);
> +	unsigned int maxtimeout = 0xFFFFFFFF / clkrate;
> +
> +	if (timeout > maxtimeout) {
> +		dev_warn(st_wdog->dev,
> +			 "timer overrun detected at current freq (%luHz)\n"
> +			 "wdog timeout set for %ds instead of requested %uis",
> +			 clkrate, maxtimeout, timeout);
> +		timeout = maxtimeout;
> +	}
> +	timeout *= clkrate;
> +
> +	writel_relaxed(timeout, st_wdog->base + LPC_LPA_LSB_OFF);
> +	writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
> +}
> +
> +static int st_wdog_start(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_stop(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_set_timeout(struct watchdog_device *wdd,
> +			       unsigned int timeout)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	wdd->timeout = timeout;
> +	st_wdog_load_timer(st_wdog, timeout);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_keepalive(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	st_wdog_load_timer(st_wdog, wdd->timeout);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info st_wdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +	.identity = "ST LPC WDT",
> +};
> +
> +static const struct watchdog_ops st_wdog_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= st_wdog_start,
> +	.stop		= st_wdog_stop,
> +	.ping		= st_wdog_keepalive,
> +	.set_timeout	= st_wdog_set_timeout,
> +};
> +
> +static struct watchdog_device st_wdog_dev = {
> +	.info		= &st_wdog_info,
> +	.ops		= &st_wdog_ops,
> +};
> +
> +static int st_wdog_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *np;
> +	struct st_wdog *st_wdog;
> +	struct regmap *regmap;
> +	struct resource *res;
> +	struct clk *clk;
> +	void __iomem *base;
> +	int ret;
> +
> +	/* This is a single node MFD device. */
> +	np = pdev->dev.of_node = pdev->dev.parent->of_node;
> +
> +	st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
> +	if (!st_wdog)
> +		return -ENOMEM;
> +
> +	match = of_match_device(st_wdog_match, &pdev->dev);
> +	if (!match) {
> +		dev_err(&pdev->dev, "Couldn't match device\n");
> +		return -ENODEV;
> +	}
> +	st_wdog->syscfg	= (struct st_wdog_syscfg *)match->data;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		dev_err(&pdev->dev, "Failed to ioremap base\n");
> +		return PTR_ERR(base);
> +	}
> +
> +	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> +	if (IS_ERR(regmap)) {
> +		dev_err(&pdev->dev, "No syscfg phandle specified\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	clk = clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(clk)) {
> +		dev_err(&pdev->dev, "Unable to request clock\n");
> +		return PTR_ERR(clk);
> +	}
> +	clk_prepare_enable(st_wdog->clk);
> +
> +	st_wdog->dev		= &pdev->dev;
> +	st_wdog->base		= base;
> +	st_wdog->clk		= clk;
> +	st_wdog->syscfg->regmap = regmap;
> +	st_wdog->warm_reset	= of_property_read_bool(np, "st,warm_reset");
> +
> +	watchdog_set_drvdata(&st_wdog_dev, st_wdog);
> +	watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
> +
> +	/* Init Watchdog timeout with value in DT */
> +	ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
> +		return ret;
> +	}
> +
> +	ret = watchdog_register_device(&st_wdog_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to register watchdog\n");
> +		clk_disable_unprepare(clk);
> +		return ret;
> +	}
> +
> +	st_wdog_setup(st_wdog, true);
> +
> +	dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
> +		 st_wdog->warm_reset ? "warm" : "cold");
> +
> +	return ret;
> +}
> +
> +static int st_wdog_remove(struct platform_device *pdev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	st_wdog_setup(st_wdog, false);
> +	watchdog_unregister_device(&st_wdog_dev);
> +	clk_disable_unprepare(st_wdog->clk);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int st_wdog_suspend(struct device *dev)
> +{
> +	if (watchdog_active(&st_wdog_dev))
> +		st_wdog_stop(&st_wdog_dev);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_resume(struct device *dev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	if (watchdog_active(&st_wdog_dev)) {
> +		st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
> +		st_wdog_start(&st_wdog_dev);
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
> +			 st_wdog_suspend,
> +			 st_wdog_resume);
> +
> +static struct platform_driver st_wdog_driver = {
> +	.driver	= {
> +		.name = "st-lpc-wdt",
> +		.pm = &st_wdog_pm_ops,
> +	},
> +	.probe = st_wdog_probe,
> +	.remove = st_wdog_remove,
> +};
> +module_platform_driver(st_wdog_driver);
> +
> +MODULE_AUTHOR("David Paris <david.paris@st.com>");
> +MODULE_DESCRIPTION("ST LPC Watchdog Driver");
> +MODULE_LICENSE("GPL v2");


WARNING: multiple messages have this Message-ID (diff)
From: david.paris@st.com (David Paris)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Mon, 15 Dec 2014 13:52:50 +0100	[thread overview]
Message-ID: <548ED9A2.5060403@st.com> (raw)
In-Reply-To: <1418642738-17407-7-git-send-email-lee.jones@linaro.org>

Hi Lee,

     Something I didn't pointed out before, this driver is only supposed 
to support LPC_0 for stih407. The enable mask is only coded for LPC_0. 
Is it a wanted behavior ?

     In our current implementation here in ST is that LPC_0 is for A9 
Watchdog and LPC_1 for A9 global timer. This has been translated in the 
driver by hardcoding enable mask of LPC watchdog to only support LPC_0. 
But do we want to have a more generic driver to be applicable both for 
LPC_0 and LPC_1 ?

     David

On 12/15/2014 12:25 PM, Lee Jones wrote:
> Signed-off-by: David Paris <david.paris@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>   drivers/watchdog/Kconfig  |  13 ++
>   drivers/watchdog/Makefile |   1 +
>   drivers/watchdog/st_wdt.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 326 insertions(+)
>   create mode 100644 drivers/watchdog/st_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312f..5a538af 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -432,6 +432,19 @@ config SIRFSOC_WATCHDOG
>   	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
>   	  the watchdog triggers the system will be reset.
>   
> +config ST_WATCHDOG
> +	tristate "STMicroelectronics LPC Watchdog"
> +	depends on ARCH_STI
> +	depends on OF
> +	select WATCHDOG_CORE
> +	select MFD_ST_LPC
> +	help
> +	  Say Y here to include STMicroelectronics Low Power Controller
> +	  (LPC) based Watchdog timer support.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called st_wdt.
> +
>   config TEGRA_WATCHDOG
>   	tristate "Tegra watchdog"
>   	depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..eb19937 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>   obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
>   obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>   obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_WATCHDOG) += st_wdt.o
>   obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
>   obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>   
> diff --git a/drivers/watchdog/st_wdt.c b/drivers/watchdog/st_wdt.c
> new file mode 100644
> index 0000000..7e06f15
> --- /dev/null
> +++ b/drivers/watchdog/st_wdt.c
> @@ -0,0 +1,312 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog
> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris@st.com> for STMicroelectronics
> + *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/* Low Power Alarm */
> +#define LPC_LPA_LSB_OFF			0x410
> +#define LPC_LPA_START_OFF		0x418
> +
> +/* LPC as WDT */
> +#define LPC_WDT_OFF			0x510
> +
> +struct st_wdog_syscfg {
> +	struct regmap *regmap;
> +	unsigned int reset_type_reg;
> +	unsigned int reset_type_mask;
> +	unsigned int enable_reg;
> +	unsigned int enable_mask;
> +};
> +
> +struct st_wdog {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct st_wdog_syscfg *syscfg;
> +	struct clk *clk;
> +	int warm_reset;
> +};
> +
> +static struct st_wdog_syscfg stid127_syscfg = {
> +	.reset_type_reg		= 0x004,
> +	.reset_type_mask	= BIT(2),
> +	.enable_reg		= 0x000,
> +	.enable_mask		= BIT(2),
> +};
> +
> +static struct st_wdog_syscfg stih415_syscfg = {
> +	.reset_type_reg		= 0x0B8,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x0B4,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih416_syscfg = {
> +	.reset_type_reg		= 0x88C,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x888,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih407_syscfg = {
> +	.enable_reg		= 0x204,
> +	.enable_mask		= BIT(19),
> +};
> +
> +static struct of_device_id st_wdog_match[] = {
> +	{
> +		.compatible = "st,stih407-lpc",
> +		.data = (void *)&stih407_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih416-lpc",
> +		.data = (void *)&stih416_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih415-lpc",
> +		.data = (void *)&stih415_syscfg,
> +	},
> +	{
> +		.compatible = "st,stid127-lpc",
> +		.data = (void *)&stid127_syscfg,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, st_wdog_match);
> +
> +static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
> +{
> +	/* Type of watchdog reset - 0: Cold 1: Warm */
> +	if (st_wdog->syscfg->reset_type_reg)
> +		regmap_update_bits(st_wdog->syscfg->regmap,
> +				   st_wdog->syscfg->reset_type_reg,
> +				   st_wdog->syscfg->reset_type_mask,
> +				   st_wdog->warm_reset);
> +
> +	/* Mask/unmask watchdog reset */
> +	regmap_update_bits(st_wdog->syscfg->regmap,
> +			   st_wdog->syscfg->enable_reg,
> +			   st_wdog->syscfg->enable_mask,
> +			   enable ? 0 : st_wdog->syscfg->enable_mask);
> +}
> +
> +static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
> +{
> +	unsigned long clkrate = clk_get_rate(st_wdog->clk);
> +	unsigned int maxtimeout = 0xFFFFFFFF / clkrate;
> +
> +	if (timeout > maxtimeout) {
> +		dev_warn(st_wdog->dev,
> +			 "timer overrun detected at current freq (%luHz)\n"
> +			 "wdog timeout set for %ds instead of requested %uis",
> +			 clkrate, maxtimeout, timeout);
> +		timeout = maxtimeout;
> +	}
> +	timeout *= clkrate;
> +
> +	writel_relaxed(timeout, st_wdog->base + LPC_LPA_LSB_OFF);
> +	writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
> +}
> +
> +static int st_wdog_start(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_stop(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_set_timeout(struct watchdog_device *wdd,
> +			       unsigned int timeout)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	wdd->timeout = timeout;
> +	st_wdog_load_timer(st_wdog, timeout);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_keepalive(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	st_wdog_load_timer(st_wdog, wdd->timeout);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info st_wdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +	.identity = "ST LPC WDT",
> +};
> +
> +static const struct watchdog_ops st_wdog_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= st_wdog_start,
> +	.stop		= st_wdog_stop,
> +	.ping		= st_wdog_keepalive,
> +	.set_timeout	= st_wdog_set_timeout,
> +};
> +
> +static struct watchdog_device st_wdog_dev = {
> +	.info		= &st_wdog_info,
> +	.ops		= &st_wdog_ops,
> +};
> +
> +static int st_wdog_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *np;
> +	struct st_wdog *st_wdog;
> +	struct regmap *regmap;
> +	struct resource *res;
> +	struct clk *clk;
> +	void __iomem *base;
> +	int ret;
> +
> +	/* This is a single node MFD device. */
> +	np = pdev->dev.of_node = pdev->dev.parent->of_node;
> +
> +	st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
> +	if (!st_wdog)
> +		return -ENOMEM;
> +
> +	match = of_match_device(st_wdog_match, &pdev->dev);
> +	if (!match) {
> +		dev_err(&pdev->dev, "Couldn't match device\n");
> +		return -ENODEV;
> +	}
> +	st_wdog->syscfg	= (struct st_wdog_syscfg *)match->data;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		dev_err(&pdev->dev, "Failed to ioremap base\n");
> +		return PTR_ERR(base);
> +	}
> +
> +	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> +	if (IS_ERR(regmap)) {
> +		dev_err(&pdev->dev, "No syscfg phandle specified\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	clk = clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(clk)) {
> +		dev_err(&pdev->dev, "Unable to request clock\n");
> +		return PTR_ERR(clk);
> +	}
> +	clk_prepare_enable(st_wdog->clk);
> +
> +	st_wdog->dev		= &pdev->dev;
> +	st_wdog->base		= base;
> +	st_wdog->clk		= clk;
> +	st_wdog->syscfg->regmap = regmap;
> +	st_wdog->warm_reset	= of_property_read_bool(np, "st,warm_reset");
> +
> +	watchdog_set_drvdata(&st_wdog_dev, st_wdog);
> +	watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
> +
> +	/* Init Watchdog timeout with value in DT */
> +	ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
> +		return ret;
> +	}
> +
> +	ret = watchdog_register_device(&st_wdog_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to register watchdog\n");
> +		clk_disable_unprepare(clk);
> +		return ret;
> +	}
> +
> +	st_wdog_setup(st_wdog, true);
> +
> +	dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
> +		 st_wdog->warm_reset ? "warm" : "cold");
> +
> +	return ret;
> +}
> +
> +static int st_wdog_remove(struct platform_device *pdev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	st_wdog_setup(st_wdog, false);
> +	watchdog_unregister_device(&st_wdog_dev);
> +	clk_disable_unprepare(st_wdog->clk);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int st_wdog_suspend(struct device *dev)
> +{
> +	if (watchdog_active(&st_wdog_dev))
> +		st_wdog_stop(&st_wdog_dev);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_resume(struct device *dev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	if (watchdog_active(&st_wdog_dev)) {
> +		st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
> +		st_wdog_start(&st_wdog_dev);
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
> +			 st_wdog_suspend,
> +			 st_wdog_resume);
> +
> +static struct platform_driver st_wdog_driver = {
> +	.driver	= {
> +		.name = "st-lpc-wdt",
> +		.pm = &st_wdog_pm_ops,
> +	},
> +	.probe = st_wdog_probe,
> +	.remove = st_wdog_remove,
> +};
> +module_platform_driver(st_wdog_driver);
> +
> +MODULE_AUTHOR("David Paris <david.paris@st.com>");
> +MODULE_DESCRIPTION("ST LPC Watchdog Driver");
> +MODULE_LICENSE("GPL v2");

WARNING: multiple messages have this Message-ID (diff)
From: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
To: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org,
	a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Date: Mon, 15 Dec 2014 13:52:50 +0100	[thread overview]
Message-ID: <548ED9A2.5060403@st.com> (raw)
In-Reply-To: <1418642738-17407-7-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Hi Lee,

     Something I didn't pointed out before, this driver is only supposed 
to support LPC_0 for stih407. The enable mask is only coded for LPC_0. 
Is it a wanted behavior ?

     In our current implementation here in ST is that LPC_0 is for A9 
Watchdog and LPC_1 for A9 global timer. This has been translated in the 
driver by hardcoding enable mask of LPC watchdog to only support LPC_0. 
But do we want to have a more generic driver to be applicable both for 
LPC_0 and LPC_1 ?

     David

On 12/15/2014 12:25 PM, Lee Jones wrote:
> Signed-off-by: David Paris <david.paris-qxv4g6HH51o@public.gmane.org>
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>   drivers/watchdog/Kconfig  |  13 ++
>   drivers/watchdog/Makefile |   1 +
>   drivers/watchdog/st_wdt.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 326 insertions(+)
>   create mode 100644 drivers/watchdog/st_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f57312f..5a538af 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -432,6 +432,19 @@ config SIRFSOC_WATCHDOG
>   	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
>   	  the watchdog triggers the system will be reset.
>   
> +config ST_WATCHDOG
> +	tristate "STMicroelectronics LPC Watchdog"
> +	depends on ARCH_STI
> +	depends on OF
> +	select WATCHDOG_CORE
> +	select MFD_ST_LPC
> +	help
> +	  Say Y here to include STMicroelectronics Low Power Controller
> +	  (LPC) based Watchdog timer support.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called st_wdt.
> +
>   config TEGRA_WATCHDOG
>   	tristate "Tegra watchdog"
>   	depends on ARCH_TEGRA || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..eb19937 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>   obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
>   obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>   obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
> +obj-$(CONFIG_ST_WATCHDOG) += st_wdt.o
>   obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
>   obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>   
> diff --git a/drivers/watchdog/st_wdt.c b/drivers/watchdog/st_wdt.c
> new file mode 100644
> index 0000000..7e06f15
> --- /dev/null
> +++ b/drivers/watchdog/st_wdt.c
> @@ -0,0 +1,312 @@
> +/*
> + * st-wdt.c - ST's LPC Watchdog
> + *
> + * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
> + *
> + * Author: David Paris <david.paris-qxv4g6HH51o@public.gmane.org> for STMicroelectronics
> + *         Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> for STMicroelectronics
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public Licence
> + * as published by the Free Software Foundation; either version
> + * 2 of the Licence, or (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +/* Low Power Alarm */
> +#define LPC_LPA_LSB_OFF			0x410
> +#define LPC_LPA_START_OFF		0x418
> +
> +/* LPC as WDT */
> +#define LPC_WDT_OFF			0x510
> +
> +struct st_wdog_syscfg {
> +	struct regmap *regmap;
> +	unsigned int reset_type_reg;
> +	unsigned int reset_type_mask;
> +	unsigned int enable_reg;
> +	unsigned int enable_mask;
> +};
> +
> +struct st_wdog {
> +	void __iomem *base;
> +	struct device *dev;
> +	struct st_wdog_syscfg *syscfg;
> +	struct clk *clk;
> +	int warm_reset;
> +};
> +
> +static struct st_wdog_syscfg stid127_syscfg = {
> +	.reset_type_reg		= 0x004,
> +	.reset_type_mask	= BIT(2),
> +	.enable_reg		= 0x000,
> +	.enable_mask		= BIT(2),
> +};
> +
> +static struct st_wdog_syscfg stih415_syscfg = {
> +	.reset_type_reg		= 0x0B8,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x0B4,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih416_syscfg = {
> +	.reset_type_reg		= 0x88C,
> +	.reset_type_mask	= BIT(6),
> +	.enable_reg		= 0x888,
> +	.enable_mask		= BIT(7),
> +};
> +
> +static struct st_wdog_syscfg stih407_syscfg = {
> +	.enable_reg		= 0x204,
> +	.enable_mask		= BIT(19),
> +};
> +
> +static struct of_device_id st_wdog_match[] = {
> +	{
> +		.compatible = "st,stih407-lpc",
> +		.data = (void *)&stih407_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih416-lpc",
> +		.data = (void *)&stih416_syscfg,
> +	},
> +	{
> +		.compatible = "st,stih415-lpc",
> +		.data = (void *)&stih415_syscfg,
> +	},
> +	{
> +		.compatible = "st,stid127-lpc",
> +		.data = (void *)&stid127_syscfg,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, st_wdog_match);
> +
> +static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
> +{
> +	/* Type of watchdog reset - 0: Cold 1: Warm */
> +	if (st_wdog->syscfg->reset_type_reg)
> +		regmap_update_bits(st_wdog->syscfg->regmap,
> +				   st_wdog->syscfg->reset_type_reg,
> +				   st_wdog->syscfg->reset_type_mask,
> +				   st_wdog->warm_reset);
> +
> +	/* Mask/unmask watchdog reset */
> +	regmap_update_bits(st_wdog->syscfg->regmap,
> +			   st_wdog->syscfg->enable_reg,
> +			   st_wdog->syscfg->enable_mask,
> +			   enable ? 0 : st_wdog->syscfg->enable_mask);
> +}
> +
> +static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
> +{
> +	unsigned long clkrate = clk_get_rate(st_wdog->clk);
> +	unsigned int maxtimeout = 0xFFFFFFFF / clkrate;
> +
> +	if (timeout > maxtimeout) {
> +		dev_warn(st_wdog->dev,
> +			 "timer overrun detected at current freq (%luHz)\n"
> +			 "wdog timeout set for %ds instead of requested %uis",
> +			 clkrate, maxtimeout, timeout);
> +		timeout = maxtimeout;
> +	}
> +	timeout *= clkrate;
> +
> +	writel_relaxed(timeout, st_wdog->base + LPC_LPA_LSB_OFF);
> +	writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
> +}
> +
> +static int st_wdog_start(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_stop(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_set_timeout(struct watchdog_device *wdd,
> +			       unsigned int timeout)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	wdd->timeout = timeout;
> +	st_wdog_load_timer(st_wdog, timeout);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_keepalive(struct watchdog_device *wdd)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
> +
> +	st_wdog_load_timer(st_wdog, wdd->timeout);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info st_wdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> +	.identity = "ST LPC WDT",
> +};
> +
> +static const struct watchdog_ops st_wdog_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= st_wdog_start,
> +	.stop		= st_wdog_stop,
> +	.ping		= st_wdog_keepalive,
> +	.set_timeout	= st_wdog_set_timeout,
> +};
> +
> +static struct watchdog_device st_wdog_dev = {
> +	.info		= &st_wdog_info,
> +	.ops		= &st_wdog_ops,
> +};
> +
> +static int st_wdog_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *np;
> +	struct st_wdog *st_wdog;
> +	struct regmap *regmap;
> +	struct resource *res;
> +	struct clk *clk;
> +	void __iomem *base;
> +	int ret;
> +
> +	/* This is a single node MFD device. */
> +	np = pdev->dev.of_node = pdev->dev.parent->of_node;
> +
> +	st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
> +	if (!st_wdog)
> +		return -ENOMEM;
> +
> +	match = of_match_device(st_wdog_match, &pdev->dev);
> +	if (!match) {
> +		dev_err(&pdev->dev, "Couldn't match device\n");
> +		return -ENODEV;
> +	}
> +	st_wdog->syscfg	= (struct st_wdog_syscfg *)match->data;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		dev_err(&pdev->dev, "Failed to ioremap base\n");
> +		return PTR_ERR(base);
> +	}
> +
> +	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> +	if (IS_ERR(regmap)) {
> +		dev_err(&pdev->dev, "No syscfg phandle specified\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	clk = clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(clk)) {
> +		dev_err(&pdev->dev, "Unable to request clock\n");
> +		return PTR_ERR(clk);
> +	}
> +	clk_prepare_enable(st_wdog->clk);
> +
> +	st_wdog->dev		= &pdev->dev;
> +	st_wdog->base		= base;
> +	st_wdog->clk		= clk;
> +	st_wdog->syscfg->regmap = regmap;
> +	st_wdog->warm_reset	= of_property_read_bool(np, "st,warm_reset");
> +
> +	watchdog_set_drvdata(&st_wdog_dev, st_wdog);
> +	watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
> +
> +	/* Init Watchdog timeout with value in DT */
> +	ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
> +		return ret;
> +	}
> +
> +	ret = watchdog_register_device(&st_wdog_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to register watchdog\n");
> +		clk_disable_unprepare(clk);
> +		return ret;
> +	}
> +
> +	st_wdog_setup(st_wdog, true);
> +
> +	dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
> +		 st_wdog->warm_reset ? "warm" : "cold");
> +
> +	return ret;
> +}
> +
> +static int st_wdog_remove(struct platform_device *pdev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	st_wdog_setup(st_wdog, false);
> +	watchdog_unregister_device(&st_wdog_dev);
> +	clk_disable_unprepare(st_wdog->clk);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int st_wdog_suspend(struct device *dev)
> +{
> +	if (watchdog_active(&st_wdog_dev))
> +		st_wdog_stop(&st_wdog_dev);
> +
> +	return 0;
> +}
> +
> +static int st_wdog_resume(struct device *dev)
> +{
> +	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
> +
> +	if (watchdog_active(&st_wdog_dev)) {
> +		st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
> +		st_wdog_start(&st_wdog_dev);
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
> +			 st_wdog_suspend,
> +			 st_wdog_resume);
> +
> +static struct platform_driver st_wdog_driver = {
> +	.driver	= {
> +		.name = "st-lpc-wdt",
> +		.pm = &st_wdog_pm_ops,
> +	},
> +	.probe = st_wdog_probe,
> +	.remove = st_wdog_remove,
> +};
> +module_platform_driver(st_wdog_driver);
> +
> +MODULE_AUTHOR("David Paris <david.paris-qxv4g6HH51o@public.gmane.org>");
> +MODULE_DESCRIPTION("ST LPC Watchdog Driver");
> +MODULE_LICENSE("GPL v2");

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-12-15 12:53 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-15 11:25 [PATCH 0/8] mfd: watchdog: rtc: New driver for ST's LPC IP Lee Jones
2014-12-15 11:25 ` Lee Jones
2014-12-15 11:25 ` Lee Jones
2014-12-15 11:25 ` [PATCH 1/8] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25 ` [PATCH 2/8] ARM: multi_v7_defconfig: Enable support for ST's LPC RTC Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25 ` [PATCH 3/8] mfd: bindings: Provide ST bindings for ST's LPC device Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25 ` [PATCH 4/8] mfd: dt-bindings: Provide human readable defines for LPC mode choosing Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25 ` [PATCH 5/8] mfd: Add ST's Low Power Controller driver Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 13:38   ` Arnd Bergmann
2014-12-15 13:38     ` Arnd Bergmann
2014-12-15 13:38     ` Arnd Bergmann
2014-12-15 13:50     ` Lee Jones
2014-12-15 13:50       ` Lee Jones
2014-12-15 13:50       ` Lee Jones
2014-12-15 14:06       ` Arnd Bergmann
2014-12-15 14:06         ` Arnd Bergmann
2014-12-15 14:06         ` Arnd Bergmann
2014-12-15 14:38         ` Lee Jones
2014-12-15 14:38           ` Lee Jones
2014-12-15 14:38           ` Lee Jones
2014-12-15 14:38           ` Lee Jones
2014-12-15 11:25 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 12:29   ` David Paris
2014-12-15 12:29     ` David Paris
2014-12-15 12:29     ` David Paris
2014-12-15 12:52   ` David Paris [this message]
2014-12-15 12:52     ` David Paris
2014-12-15 12:52     ` David Paris
2014-12-15 14:15   ` Guenter Roeck
2014-12-15 14:15     ` Guenter Roeck
2014-12-15 14:15     ` Guenter Roeck
2014-12-15 16:23   ` Guenter Roeck
2014-12-15 16:23     ` Guenter Roeck
2014-12-15 11:25 ` [PATCH 7/8] rtc: st: add new driver for ST's LPC RTC Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 12:28   ` [STLinux Kernel] " David Paris
2014-12-15 12:28     ` David Paris
2014-12-15 12:28     ` David Paris
2014-12-15 14:17   ` Guenter Roeck
2014-12-15 14:17     ` Guenter Roeck
2014-12-15 14:17     ` Guenter Roeck
2014-12-15 11:25 ` [PATCH 8/8] ARM: STi: DT: STiH407: Add Device Tree node for the LPC Lee Jones
2014-12-15 11:25   ` Lee Jones
2014-12-15 11:25   ` Lee Jones
  -- strict thread matches above, loose matches on Subject: below --
2014-12-17 16:45 [PATCH v2 0/8] watchdog: rtc: New driver(s) for ST's LPC IP Lee Jones
2014-12-17 16:45 ` [PATCH 6/8] watchdog: st_wdt: Add new driver for ST's LPC Watchdog Lee Jones
2014-12-17 16:45   ` Lee Jones
2014-12-17 16:45   ` Lee Jones
2014-12-17 18:02   ` Guenter Roeck
2014-12-17 18:02     ` Guenter Roeck
2014-12-18  8:26     ` Lee Jones
2014-12-18  8:26       ` Lee Jones
2014-12-18  8:26       ` Lee Jones
2014-12-18 16:00       ` Guenter Roeck
2014-12-18 16:00         ` Guenter Roeck
2014-12-18 17:20         ` Lee Jones
2014-12-18 17:20           ` Lee Jones
2014-12-18 17:20           ` Lee Jones
2014-12-18 17:20           ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=548ED9A2.5060403@st.com \
    --to=david.paris@st.com \
    --cc=a.zummo@towertech.it \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.