[PATCH v4 2/5] media: ov2640: add async probe function

[josh.wu@atmel.com (Josh Wu)]

Hi, Guennadi

On 12/30/2014 4:36 PM, Guennadi Liakhovetski wrote:
> Hi Laurent,
>
> First of all, sorry, I am currently on a holiday, so, replies are delayed,
> real work (reviewing or anything else) is impossible.

Thanks for your review in holiday. That's very helpful.
>
> On Tue, 30 Dec 2014, Laurent Pinchart wrote:
>
>> Hi Guennadi,
>>
>> On Friday 26 December 2014 11:38:11 Guennadi Liakhovetski wrote:
>>> On Fri, 26 Dec 2014, Laurent Pinchart wrote:
>>>> On Friday 26 December 2014 10:14:26 Guennadi Liakhovetski wrote:
>>>>> On Fri, 26 Dec 2014, Laurent Pinchart wrote:
>>>>>> On Friday 26 December 2014 14:37:14 Josh Wu wrote:
>> [snip]
>>
>>>>>> Talking about mclk and xvclk is quite confusing. There's no mclk from
>>>>>> an ov2640 point of view. The ov2640 driver should call
>>>>>> v4l2_clk_get("xvclk").
>>>>> Yes, I also was thinking about this, and yes, requesting a "xvclk" clock
>>>>> would be more logical. But then, as you write below, if we let the
>>>>> v4l2_clk wrapper first check for a CCF "xvclk" clock, say, none is
>>>>> found. How do we then find the exported "mclk" V4L2 clock? Maybe
>>>>> v4l2_clk_get() should use two names?..
>>>> Given that v4l2_clk_get() is only used by soc-camera drivers and that they
>>>> all call it with the clock name set to "mclk", I wonder whether we
>>>> couldn't just get rid of struct v4l2_clk.id and ignore the id argument to
>>>> v4l2_clk_get() when CCF isn't available. Maybe we've overdesigned
>>>> v4l2_clk :-)
>>> Sure, that'd be fine with me, if everyone else agrees.
>> Can you submit a patch ? That's the best way to find out if anyone objects.
> Can do, sure, once I am back home and find time for this.
>
>> [snip]
>>
>>>>>> v4l2_clk_get() should try to get the clock from CCF with a call to
>>>>>> clk_get() first, and then look at the list of v4l2-specific clocks.
>>>>> Yes, how will it find the "mclk" when "xvclk" (or any other name) is
>>>>> requested? We did discuss this in the beginning and agreed to use a
>>>>> fixed clock name for the time being...
>>>> Please see above.
>>>>
>>>>>> That's at least how I had envisioned it when v4l2_clk_get() was
>>>>>> introduced. Let's remember that v4l2_clk was designed as a temporary
>>>>>> workaround for platforms not implementing CCF yet. Is that still
>>>>>> needed,
>>>>>> or could be instead just get rid of it now ?
>>>>> I didn't check, but I don't think all platforms, handled by soc-camera,
>>>>> support CCF yet.
>>>> After a quick check it looks like only OMAP1 and SH Mobile are missing.
>>>> Atmel, MX2, MX3 and R-Car all support CCF. PXA27x has CCF support but
>>>> doesn't enable it yet for an unknown (to me) reason.
>>>>
>>>> The CEU driver is used on both arch/sh and arch/arm/mach-shmobile. The
>>>> former will most likely never receive CCF support, and the latter is
>>>> getting fixed. As arch/sh isn't maintained anymore I would be fine with
>>>> dropping CEU support for it.
>>>>
>>>> OMAP1 is thus the only long-term show-stopper. What should we do with it ?
>>> Indeed, what should we? :)
>> You're listed as the soc-camera maintainer, so you should provide an answer to
>> that question :-)
> Thanks for ar reminder;)
>
>> I'll propose one, let's drop the omap1-camera driver (I've
>> CC'ed the original author of the driver to this e-mail).
> Let's see what they reply, but I don't tgink Josh will want to wait that
> long.

Thanks. it's indeed true for me.

> And until omap1 is in the mainline we cannot drop v4l2_clk.

So I think the better way right now for ov2640 driver is still request 
both the v4l2_clock: mclk, and the clock: xvclk in probe().
In that way,  we can take our time to introduce other patches to merged 
these two clocks.
Does it make sense?

Best Regards,
Josh Wu

>
> Thanks
> Guennadi
>
>> -- 
>> Regards,
>>
>> Laurent Pinchart
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html