From: Varka Bhadram <varkabhadram-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org
Cc: linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux ARM
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Matthew.Fatheree-REUqjI8E1xrQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver
Date: Fri, 09 Jan 2015 06:06:05 +0530 [thread overview]
Message-ID: <54AF2275.9050600@gmail.com> (raw)
In-Reply-To: <1420763178-10115-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
On Friday 09 January 2015 05:56 AM, Andrew Lunn wrote:
> The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED
> output has its own 8-bit fixed-frequency PWM controller to control the
> brightness of the LED.
>
> This is based on a driver from Belkin, but has been extensively
> rewritten.
>
> Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
> Cc: Matthew.Fatheree-REUqjI8E1xrQT0dZR+AlfA@public.gmane.org
> ---
> drivers/leds/Kconfig | 7 ++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-tlc59116.c | 253 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 261 insertions(+)
> create mode 100644 drivers/leds/leds-tlc59116.c
>
(...)
> +static const struct of_device_id of_tlc59116_leds_match[] = {
> + { .compatible = "ti,tlc59116", },
> + {},
> +};
> +
Missing MODULE_DEVICE_TABLE(of, ...)..?
> +static const struct i2c_device_id tlc59116_id[] = {
> + { "tlc59116" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, tlc59116_id);
> +
> +static struct i2c_driver tlc59116_driver = {
> + .driver = {
> + .name = "tlc59116",
> + .of_match_table = of_match_ptr(of_tlc59116_leds_match),
> +
Remove this unnecessary line space...
> + },
> + .probe = tlc59116_probe,
> + .remove = tlc59116_remove,
> + .id_table = tlc59116_id,
> +};
> +
> +module_i2c_driver(tlc59116_driver);
> +
> +MODULE_AUTHOR("Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("TLC59116 LED driver");
--
Thanks and Regards,
Varka Bhadram.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: varkabhadram@gmail.com (Varka Bhadram)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] leds: tlc59116: Driver for the TI 16 Channel i2c LED driver
Date: Fri, 09 Jan 2015 06:06:05 +0530 [thread overview]
Message-ID: <54AF2275.9050600@gmail.com> (raw)
In-Reply-To: <1420763178-10115-3-git-send-email-andrew@lunn.ch>
On Friday 09 January 2015 05:56 AM, Andrew Lunn wrote:
> The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED
> output has its own 8-bit fixed-frequency PWM controller to control the
> brightness of the LED.
>
> This is based on a driver from Belkin, but has been extensively
> rewritten.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Cc: Matthew.Fatheree at belkin.com
> ---
> drivers/leds/Kconfig | 7 ++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-tlc59116.c | 253 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 261 insertions(+)
> create mode 100644 drivers/leds/leds-tlc59116.c
>
(...)
> +static const struct of_device_id of_tlc59116_leds_match[] = {
> + { .compatible = "ti,tlc59116", },
> + {},
> +};
> +
Missing MODULE_DEVICE_TABLE(of, ...)..?
> +static const struct i2c_device_id tlc59116_id[] = {
> + { "tlc59116" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, tlc59116_id);
> +
> +static struct i2c_driver tlc59116_driver = {
> + .driver = {
> + .name = "tlc59116",
> + .of_match_table = of_match_ptr(of_tlc59116_leds_match),
> +
Remove this unnecessary line space...
> + },
> + .probe = tlc59116_probe,
> + .remove = tlc59116_remove,
> + .id_table = tlc59116_id,
> +};
> +
> +module_i2c_driver(tlc59116_driver);
> +
> +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("TLC59116 LED driver");
--
Thanks and Regards,
Varka Bhadram.
next prev parent reply other threads:[~2015-01-09 0:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 0:26 [PATCH 0/2] Driver for TI tlc59116 16 Channel i2c LED driver Andrew Lunn
2015-01-09 0:26 ` Andrew Lunn
2015-01-09 0:26 ` [PATCH 1/2] leds: tlc59116: Document binding for the TI " Andrew Lunn
2015-01-09 0:26 ` Andrew Lunn
2015-01-09 1:02 ` Bryan Wu
2015-01-09 1:02 ` Bryan Wu
2015-01-09 1:34 ` Andrew Lunn
2015-01-09 1:34 ` Andrew Lunn
[not found] ` <1420763178-10115-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2015-01-09 0:26 ` [PATCH 2/2] leds: tlc59116: Driver " Andrew Lunn
2015-01-09 0:26 ` Andrew Lunn
[not found] ` <1420763178-10115-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2015-01-09 0:36 ` Varka Bhadram [this message]
2015-01-09 0:36 ` Varka Bhadram
2015-01-09 1:42 ` Andrew Lunn
2015-01-09 1:42 ` Andrew Lunn
2015-01-09 1:26 ` Bryan Wu
2015-01-09 1:26 ` Bryan Wu
2015-01-09 1:38 ` Andrew Lunn
2015-01-09 1:38 ` Andrew Lunn
2015-01-09 12:46 ` Imre Kaloz
2015-01-09 12:46 ` Imre Kaloz
2015-01-09 13:58 ` Andrew Lunn
2015-01-09 13:58 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54AF2275.9050600@gmail.com \
--to=varkabhadram-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=Matthew.Fatheree-REUqjI8E1xrQT0dZR+AlfA@public.gmane.org \
--cc=andrew-g2DYL2Zd6BY@public.gmane.org \
--cc=cooloney-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.