Re: [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string

[Guenter Roeck <linux@roeck-us.net>]

On 01/14/2015 05:34 PM, Kevin Hilman wrote:
> From: Kevin Hilman <khilman@linaro.org>
>
> Add support for "ina231" as compatible string, and update
> Documentation and Kconfig accordingly.
>
> Tested with the Exynos5422-based odroid-xu3 board which has on-board
> INA231 sensors.
>
> Signed-off-by: Kevin Hilman <khilman@linaro.org>

Applied to -next after minor cleanup (see below).

> ---
>   Documentation/hwmon/ina2xx | 9 +++++++++
>   drivers/hwmon/Kconfig      | 4 ++--
>   drivers/hwmon/ina2xx.c     | 1 +
>   3 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
> index 4223c2d3b508..c2f838f65ee4 100644
> --- a/Documentation/hwmon/ina2xx
> +++ b/Documentation/hwmon/ina2xx
> @@ -26,6 +26,12 @@ Supported chips:
>       Datasheet: Publicly available at the Texas Instruments website
>                  http://www.ti.com/
>
> +  * Texas Instruments INA231
> +    Prefix: 'ina231'
> +    Addresses: I2C 0x40 - 0x4f
> +    Datasheet: Publicly available at the Texas Instruments website
> +               http://www.ti.com/
> +
>   Author: Lothar Felten <l-felten@ti.com>
>
>   Description
> @@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
>   The INA230 is a high or low side current shunt and power monitor with an I2C
>   interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
>
> +The INA231 is a high or low side current shunt and power monitor with an I2C
> +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
> +
		The INA231 ...

I fixed this up and merged above two paragraphs into one.

Guenter


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors