[PATCH v4 4/4] phy: add phy-hi6220-usb

[kishon@ti.com (Kishon Vijay Abraham I)]

Hi,

On Thursday 12 February 2015 01:07 PM, Zhangfei Gao wrote:
> Add usb phy controller for hi6220 platform
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
>   drivers/phy/Kconfig          |   9 ++
>   drivers/phy/Makefile         |   1 +
>   drivers/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 316 insertions(+)
>   create mode 100644 drivers/phy/phy-hi6220-usb.c

why is this driver in drivers/phy when it doesn't use the generic PHY framework 
at all?


-Kishon

>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index ccad880..40a1ef1 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -162,6 +162,15 @@ config PHY_HIX5HD2_SATA
>   	help
>   	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
>
> +config PHY_HI6220_USB
> +	tristate "hi6220 USB PHY support"
> +	select USB_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the HISILICON HI6220 USB PHY.
> +
> +	  To compile this driver as a module, choose M here.
> +
>   config PHY_SUN4I_USB
>   	tristate "Allwinner sunxi SoC USB PHY driver"
>   	depends on ARCH_SUNXI && HAS_IOMEM && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index aa74f96..ec43c2d 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
>   obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
>   obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
>   obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
>   obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
>   obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
>   phy-exynos-usb2-y			+= phy-samsung-usb2.o
> diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/phy-hi6220-usb.c
> new file mode 100644
> index 0000000..0d9f5ac
> --- /dev/null
> +++ b/drivers/phy/phy-hi6220-usb.c
> @@ -0,0 +1,306 @@
> +/*
> + * Copyright (c) 2015 Linaro Ltd.
> + * Copyright (c) 2015 Hisilicon Limited.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/otg.h>
> +
> +#define SC_PERIPH_CTRL4			0x00c
> +
> +#define CTRL4_PICO_SIDDQ		BIT(6)
> +#define CTRL4_PICO_OGDISABLE		BIT(8)
> +#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
> +#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
> +#define CTRL4_OTG_PHY_SEL		BIT(21)
> +
> +#define SC_PERIPH_CTRL5			0x010
> +
> +#define CTRL5_USBOTG_RES_SEL		BIT(3)
> +#define CTRL5_PICOPHY_ACAENB		BIT(4)
> +#define CTRL5_PICOPHY_BC_MODE		BIT(5)
> +#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
> +#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
> +#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
> +#define CTRL5_PICOPHY_DCDENB		BIT(9)
> +#define CTRL5_PICOPHY_IDDIG		BIT(10)
> +
> +#define SC_PERIPH_CTRL8			0x018
> +#define SC_PERIPH_RSTEN0		0x300
> +#define SC_PERIPH_RSTDIS0		0x304
> +
> +#define RST0_USBOTG_BUS			BIT(4)
> +#define RST0_POR_PICOPHY		BIT(5)
> +#define RST0_USBOTG			BIT(6)
> +#define RST0_USBOTG_32K			BIT(7)
> +
> +#define EYE_PATTERN_PARA		0x7053348c
> +
> +struct hi6220_priv {
> +	struct usb_phy phy;
> +	struct delayed_work work;
> +	struct regmap *reg;
> +	struct clk *clk;
> +	struct regulator *vcc;
> +	struct device *dev;
> +	int gpio_vbus;
> +	int gpio_id;
> +	enum usb_otg_state state;
> +};
> +
> +static void hi6220_start_peripheral(struct hi6220_priv *priv, bool on)
> +{
> +	struct usb_otg *otg = priv->phy.otg;
> +
> +	if (!otg->gadget)
> +		return;
> +
> +	if (on)
> +		usb_gadget_connect(otg->gadget);
> +	else
> +		usb_gadget_disconnect(otg->gadget);
> +}
> +
> +static void hi6220_detect_work(struct work_struct *work)
> +{
> +	struct hi6220_priv *priv =
> +		container_of(work, struct hi6220_priv, work.work);
> +	int gpio_id, gpio_vbus;
> +	enum usb_otg_state state;
> +
> +	if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
> +		return;
> +
> +	gpio_id = gpio_get_value_cansleep(priv->gpio_id);
> +	gpio_vbus = gpio_get_value_cansleep(priv->gpio_vbus);
> +
> +	if (gpio_vbus == 0) {
> +		if (gpio_id == 1)
> +			state = OTG_STATE_B_PERIPHERAL;
> +		else
> +			state = OTG_STATE_A_HOST;
> +	} else {
> +		state = OTG_STATE_A_HOST;
> +	}
> +
> +	if (priv->state != state) {
> +		hi6220_start_peripheral(priv, state == OTG_STATE_B_PERIPHERAL);
> +		priv->state = state;
> +	}
> +}
> +
> +static irqreturn_t hiusb_gpio_intr(int irq, void *data)
> +{
> +	struct hi6220_priv *priv = (struct hi6220_priv *)data;
> +
> +	/* add debounce time */
> +	schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
> +	return IRQ_HANDLED;
> +}
> +
> +static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
> +{
> +	otg->gadget = gadget;
> +	return 0;
> +}
> +
> +static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
> +{
> +	struct regmap *reg = priv->reg;
> +	u32 val, mask;
> +	int ret;
> +
> +	if (priv->reg == NULL)
> +		return 0;
> +
> +	if (on) {
> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
> +		      RST0_USBOTG | RST0_USBOTG_32K;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
> +		if (ret)
> +			goto out;
> +
> +		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
> +		mask = val | CTRL5_PICOPHY_BC_MODE;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
> +		if (ret)
> +			goto out;
> +
> +		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
> +		       CTRL4_OTG_PHY_SEL;
> +		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
> +		if (ret)
> +			goto out;
> +
> +		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
> +		if (ret)
> +			goto out;
> +	} else {
> +		val = CTRL4_PICO_SIDDQ;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
> +		if (ret)
> +			goto out;
> +
> +		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
> +		      RST0_USBOTG | RST0_USBOTG_32K;
> +		mask = val;
> +		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
> +		if (ret)
> +			goto out;
> +	}
> +
> +	return 0;
> +out:
> +	dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
> +	return ret;
> +}
> +
> +static int hi6220_phy_probe(struct platform_device *pdev)
> +{
> +	struct hi6220_priv *priv;
> +	struct usb_otg *otg;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	int ret, irq;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
> +	if (!otg)
> +		return -ENOMEM;
> +
> +	priv->dev = dev;
> +	priv->phy.dev = &pdev->dev;
> +	priv->phy.otg = otg;
> +	priv->phy.label = "hi6220";
> +	priv->phy.type = USB_PHY_TYPE_USB2;
> +	otg->set_peripheral = hi6220_set_peripheral;
> +	platform_set_drvdata(pdev, priv);
> +
> +	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,vbus-gpios", 0);
> +	if (priv->gpio_vbus == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +	if (!gpio_is_valid(priv->gpio_vbus)) {
> +		dev_err(dev, "invalid gpio %d\n", priv->gpio_vbus);
> +		return -ENODEV;
> +	}
> +
> +	priv->gpio_id = of_get_named_gpio(np, "hisilicon,id-gpios", 0);
> +	if (priv->gpio_id == -EPROBE_DEFER)
> +		return -EPROBE_DEFER;
> +	if (!gpio_is_valid(priv->gpio_id)) {
> +		dev_err(dev, "invalid gpio %d\n", priv->gpio_id);
> +		return -ENODEV;
> +	}
> +
> +	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +					"hisilicon,peripheral-syscon");
> +	if (IS_ERR(priv->reg))
> +		priv->reg = NULL;
> +
> +	ret = devm_gpio_request_one(dev, priv->gpio_vbus,
> +				    GPIOF_IN, "gpio_vbus");
> +	if (ret < 0) {
> +		dev_err(dev, "gpio request failed for gpio_vbus\n");
> +		return ret;
> +	}
> +
> +	ret = devm_gpio_request_one(dev, priv->gpio_id, GPIOF_IN, "gpio_id");
> +	if (ret < 0) {
> +		dev_err(dev, "gpio request failed for gpio_id\n");
> +		return ret;
> +	}
> +
> +	priv->vcc = devm_regulator_get(dev, "vcc");
> +	if (IS_ERR(priv->vcc)) {
> +		if (PTR_ERR(priv->vcc) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_info(dev, "No regulator found\n");
> +	} else {
> +		ret = regulator_enable(priv->vcc);
> +		if (ret) {
> +			dev_err(dev, "Failed to enable regulator\n");
> +			return -ENODEV;
> +		}
> +	}
> +
> +	priv->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(priv->clk)) {
> +		regulator_disable(priv->vcc);
> +		return PTR_ERR(priv->clk);
> +	}
> +	clk_prepare_enable(priv->clk);
> +	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
> +
> +	irq = gpio_to_irq(priv->gpio_vbus);
> +	ret = devm_request_irq(dev, gpio_to_irq(priv->gpio_vbus),
> +			       hiusb_gpio_intr, IRQF_NO_SUSPEND |
> +			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> +			       "vbus_gpio_intr", priv);
> +	if (ret) {
> +		dev_err(dev, "request gpio irq failed.\n");
> +		goto err_irq;
> +	}
> +
> +	hi6220_phy_setup(priv, true);
> +	ret = usb_add_phy_dev(&priv->phy);
> +	if (ret) {
> +		dev_err(dev, "Can't register transceiver\n");
> +		goto err_irq;
> +	}
> +	schedule_delayed_work(&priv->work, 0);
> +
> +	return 0;
> +err_irq:
> +	cancel_delayed_work_sync(&priv->work);
> +	clk_disable_unprepare(priv->clk);
> +	regulator_disable(priv->vcc);
> +	return ret;
> +}
> +
> +static int hi6220_phy_remove(struct platform_device *pdev)
> +{
> +	struct hi6220_priv *priv = platform_get_drvdata(pdev);
> +
> +	cancel_delayed_work_sync(&priv->work);
> +	hi6220_phy_setup(priv, false);
> +	clk_disable_unprepare(priv->clk);
> +	regulator_disable(priv->vcc);
> +	return 0;
> +}
> +
> +static const struct of_device_id hi6220_phy_of_match[] = {
> +	{.compatible = "hisilicon,hi6220-usb-phy",},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
> +
> +static struct platform_driver hi6220_phy_driver = {
> +	.probe	= hi6220_phy_probe,
> +	.remove	= hi6220_phy_remove,
> +	.driver = {
> +		.name	= "hi6220-usb-phy",
> +		.of_match_table	= hi6220_phy_of_match,
> +	}
> +};
> +module_platform_driver(hi6220_phy_driver);
> +
> +MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
> +MODULE_ALIAS("platform:hi6220-usb-phy");
> +MODULE_LICENSE("GPL");
>