From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] ARM: dts: sun7i: Add OOB irq support to boards with broadcom sdio wifi
Date: Sun, 08 Mar 2015 20:19:33 +0100 [thread overview]
Message-ID: <54FCA0C5.6000400@redhat.com> (raw)
In-Reply-To: <20150308172501.GG5085@lukather>
Hi,
On 08-03-15 18:25, Maxime Ripard wrote:
> On Sat, Mar 07, 2015 at 08:01:23PM +0100, Hans de Goede wrote:
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++
>> arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++
>> 2 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> index 0c219a4..8111b0c 100644
>> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> @@ -167,12 +167,23 @@
>> };
>>
>> &mmc3 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>
> Aside from Chen-Yu's comments, that should be in the DTSI.
>
>> pinctrl-names = "default";
>> pinctrl-0 = <&mmc3_pins_a>;
>> vmmc-supply = <®_vmmc3>;
>> bus-width = <4>;
>> non-removable;
>> status = "okay";
>> +
>> + brcmf: bcrmf at 1 {
>> + reg = <1>;
>> + compatible = "brcm,bcm4329-fmac";
>> + interrupt-parent = <&pio>;
>> + interrupts = <10 8>; /* PH10 / EINT10 */
>
> And you can use interrupts-extented here (not that I really care much,
> both solutions works for me).
What is interrupts-extended / does interrupts-extended do ?
Ah, found it, Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
says:
The "interrupts-extended" property is a special form for use when a node needs
to reference multiple interrupt parents. Each entry in this property contains
both the parent phandle and the interrupt specifier. "interrupts-extended"
should only be used when a device has multiple interrupt parents.
Example:
interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
So since we do not need multiple interrupt parents here, "interrupts = "
seems to be the better syntax to use, I'll do a new version fixing
ChenYu's comments and moving the #foo-cells to the dtsi.
Thanks for merging the other patches, and for the review.
Regards,
Hans
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 6/7] ARM: dts: sun7i: Add OOB irq support to boards with broadcom sdio wifi
Date: Sun, 08 Mar 2015 20:19:33 +0100 [thread overview]
Message-ID: <54FCA0C5.6000400@redhat.com> (raw)
In-Reply-To: <20150308172501.GG5085@lukather>
Hi,
On 08-03-15 18:25, Maxime Ripard wrote:
> On Sat, Mar 07, 2015 at 08:01:23PM +0100, Hans de Goede wrote:
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++
>> arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++
>> 2 files changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> index 0c219a4..8111b0c 100644
>> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
>> @@ -167,12 +167,23 @@
>> };
>>
>> &mmc3 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>
> Aside from Chen-Yu's comments, that should be in the DTSI.
>
>> pinctrl-names = "default";
>> pinctrl-0 = <&mmc3_pins_a>;
>> vmmc-supply = <®_vmmc3>;
>> bus-width = <4>;
>> non-removable;
>> status = "okay";
>> +
>> + brcmf: bcrmf@1 {
>> + reg = <1>;
>> + compatible = "brcm,bcm4329-fmac";
>> + interrupt-parent = <&pio>;
>> + interrupts = <10 8>; /* PH10 / EINT10 */
>
> And you can use interrupts-extented here (not that I really care much,
> both solutions works for me).
What is interrupts-extended / does interrupts-extended do ?
Ah, found it, Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
says:
The "interrupts-extended" property is a special form for use when a node needs
to reference multiple interrupt parents. Each entry in this property contains
both the parent phandle and the interrupt specifier. "interrupts-extended"
should only be used when a device has multiple interrupt parents.
Example:
interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
So since we do not need multiple interrupt parents here, "interrupts = "
seems to be the better syntax to use, I'll do a new version fixing
ChenYu's comments and moving the #foo-cells to the dtsi.
Thanks for merging the other patches, and for the review.
Regards,
Hans
next prev parent reply other threads:[~2015-03-08 19:19 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-07 19:01 [PATCH 1/7] ARM: dts: sun4i: Enable tablet keys on Chuwi V7 CW0825 Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-07 19:01 ` [PATCH 2/7] ARM: dts: sun5i: Stop using different compatibles for ehci/ohci on a13 vs a10s Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 17:19 ` Maxime Ripard
2015-03-08 17:19 ` Maxime Ripard
2015-03-07 19:01 ` [PATCH 3/7] ARM: dts: sun5i: Add mmc2 pinmux settings Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 17:19 ` Maxime Ripard
2015-03-08 17:19 ` Maxime Ripard
2015-03-07 19:01 ` [PATCH 4/7] ARM: dts: sun5i: Add new Auxtek-t004 board Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 17:21 ` Maxime Ripard
2015-03-08 17:21 ` Maxime Ripard
2015-03-08 19:15 ` Hans de Goede
2015-03-08 19:15 ` Hans de Goede
2015-03-09 14:53 ` Maxime Ripard
2015-03-09 14:53 ` Maxime Ripard
2015-03-07 19:01 ` [PATCH 5/7] ARM: dts: sun5i: Add new Utoo P66 board Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 17:22 ` Maxime Ripard
2015-03-08 17:22 ` Maxime Ripard
2015-03-07 19:01 ` [PATCH 6/7] ARM: dts: sun7i: Add OOB irq support to boards with broadcom sdio wifi Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 2:40 ` [linux-sunxi] " Chen-Yu Tsai
2015-03-08 2:40 ` Chen-Yu Tsai
2015-03-08 3:12 ` [linux-sunxi] " Chen-Yu Tsai
2015-03-08 3:12 ` Chen-Yu Tsai
2015-03-08 11:25 ` [linux-sunxi] " Hans de Goede
2015-03-08 11:25 ` Hans de Goede
2015-03-08 17:25 ` Maxime Ripard
2015-03-08 17:25 ` Maxime Ripard
2015-03-08 19:19 ` Hans de Goede [this message]
2015-03-08 19:19 ` Hans de Goede
2015-03-07 19:01 ` [PATCH 7/7] ARM: dts: sun7i: Enable cap-sdio-irq for bananapro " Hans de Goede
2015-03-07 19:01 ` Hans de Goede
2015-03-08 2:42 ` [linux-sunxi] " Chen-Yu Tsai
2015-03-08 2:42 ` Chen-Yu Tsai
2015-03-08 11:27 ` [linux-sunxi] " Hans de Goede
2015-03-08 11:27 ` Hans de Goede
2015-03-08 17:26 ` [linux-sunxi] " Maxime Ripard
2015-03-08 17:26 ` Maxime Ripard
2015-03-08 17:18 ` [PATCH 1/7] ARM: dts: sun4i: Enable tablet keys on Chuwi V7 CW0825 Maxime Ripard
2015-03-08 17:18 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54FCA0C5.6000400@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.