* Moving to iMX6 SoloX CPU @ 2015-03-24 10:50 Roberto Fichera 2015-03-24 11:14 ` Gary Thomas 0 siblings, 1 reply; 10+ messages in thread From: Roberto Fichera @ 2015-03-24 10:50 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Hi All, Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. Thanks in advance, Roberto Fichera. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 10:50 Moving to iMX6 SoloX CPU Roberto Fichera @ 2015-03-24 11:14 ` Gary Thomas 2015-03-24 11:32 ` Roberto Fichera 0 siblings, 1 reply; 10+ messages in thread From: Gary Thomas @ 2015-03-24 11:14 UTC (permalink / raw) To: meta-freescale On 2015-03-24 04:50, Roberto Fichera wrote: > Hi All, > > Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. > That's a pretty vague question. What's your target [board] and current setup? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 11:14 ` Gary Thomas @ 2015-03-24 11:32 ` Roberto Fichera 2015-03-24 11:45 ` Gary Thomas 0 siblings, 1 reply; 10+ messages in thread From: Roberto Fichera @ 2015-03-24 11:32 UTC (permalink / raw) To: meta-freescale On 03/24/2015 12:14 PM, Gary Thomas wrote: > On 2015-03-24 04:50, Roberto Fichera wrote: >> Hi All, >> >> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >> > > That's a pretty vague question. What's your target [board] > and current setup? > Sorry! Forgot to add a bit of details! I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk typical setup to move all my customizations. Mainly the question what to do to set my board SOC_FAMILY to "mx6:m6sx". Cheers, Roberto Fichera. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 11:32 ` Roberto Fichera @ 2015-03-24 11:45 ` Gary Thomas 2015-03-24 12:04 ` Roberto Fichera 0 siblings, 1 reply; 10+ messages in thread From: Gary Thomas @ 2015-03-24 11:45 UTC (permalink / raw) To: meta-freescale On 2015-03-24 05:32, Roberto Fichera wrote: > On 03/24/2015 12:14 PM, Gary Thomas wrote: >> On 2015-03-24 04:50, Roberto Fichera wrote: >>> Hi All, >>> >>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>> >> >> That's a pretty vague question. What's your target [board] >> and current setup? >> > > Sorry! Forgot to add a bit of details! > > I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk > typical setup to move all my customizations. Mainly the question what to do to set my board > SOC_FAMILY to "mx6:m6sx". > Looks correct - look at how other i.MX6SX targets like imx6sxsabresd are handled. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 11:45 ` Gary Thomas @ 2015-03-24 12:04 ` Roberto Fichera 2015-03-24 13:21 ` Otavio Salvador 0 siblings, 1 reply; 10+ messages in thread From: Roberto Fichera @ 2015-03-24 12:04 UTC (permalink / raw) To: meta-freescale On 03/24/2015 12:45 PM, Gary Thomas wrote: > On 2015-03-24 05:32, Roberto Fichera wrote: >> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>> Hi All, >>>> >>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>> >>> >>> That's a pretty vague question. What's your target [board] >>> and current setup? >>> >> >> Sorry! Forgot to add a bit of details! >> >> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >> typical setup to move all my customizations. Mainly the question what to do to set my board >> SOC_FAMILY to "mx6:m6sx". >> > > Looks correct - look at how other i.MX6SX targets like imx6sxsabresd > are handled. That's what I did, but on Dizzy such target doesn't exist, hence the question. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 12:04 ` Roberto Fichera @ 2015-03-24 13:21 ` Otavio Salvador 2015-03-24 13:50 ` Roberto Fichera 0 siblings, 1 reply; 10+ messages in thread From: Otavio Salvador @ 2015-03-24 13:21 UTC (permalink / raw) To: Roberto Fichera; +Cc: meta-freescale@yoctoproject.org On Tue, Mar 24, 2015 at 9:04 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: > On 03/24/2015 12:45 PM, Gary Thomas wrote: >> On 2015-03-24 05:32, Roberto Fichera wrote: >>> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>>> Hi All, >>>>> >>>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>>> >>>> >>>> That's a pretty vague question. What's your target [board] >>>> and current setup? >>>> >>> >>> Sorry! Forgot to add a bit of details! >>> >>> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >>> typical setup to move all my customizations. Mainly the question what to do to set my board >>> SOC_FAMILY to "mx6:m6sx". >>> >> >> Looks correct - look at how other i.MX6SX targets like imx6sxsabresd >> are handled. > > That's what I did, but on Dizzy such target doesn't exist, hence the question. SoloX is not supported on Dizzy. Only Frodo (1.8). -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 13:21 ` Otavio Salvador @ 2015-03-24 13:50 ` Roberto Fichera 2015-03-24 14:00 ` Otavio Salvador 0 siblings, 1 reply; 10+ messages in thread From: Roberto Fichera @ 2015-03-24 13:50 UTC (permalink / raw) To: meta-freescale@yoctoproject.org On 03/24/2015 02:21 PM, Otavio Salvador wrote: Hi Otavio, > On Tue, Mar 24, 2015 at 9:04 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >> On 03/24/2015 12:45 PM, Gary Thomas wrote: >>> On 2015-03-24 05:32, Roberto Fichera wrote: >>>> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>>>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>>>> Hi All, >>>>>> >>>>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>>>> >>>>> That's a pretty vague question. What's your target [board] >>>>> and current setup? >>>>> >>>> Sorry! Forgot to add a bit of details! >>>> >>>> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >>>> typical setup to move all my customizations. Mainly the question what to do to set my board >>>> SOC_FAMILY to "mx6:m6sx". >>>> >>> Looks correct - look at how other i.MX6SX targets like imx6sxsabresd >>> are handled. >> That's what I did, but on Dizzy such target doesn't exist, hence the question. > SoloX is not supported on Dizzy. Only Frodo (1.8). How it's Frodo status? Is it enough stable? > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 13:50 ` Roberto Fichera @ 2015-03-24 14:00 ` Otavio Salvador 2015-03-24 14:06 ` Roberto Fichera 0 siblings, 1 reply; 10+ messages in thread From: Otavio Salvador @ 2015-03-24 14:00 UTC (permalink / raw) To: Roberto Fichera; +Cc: meta-freescale@yoctoproject.org On Tue, Mar 24, 2015 at 10:50 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: > On 03/24/2015 02:21 PM, Otavio Salvador wrote: > > Hi Otavio, > >> On Tue, Mar 24, 2015 at 9:04 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >>> On 03/24/2015 12:45 PM, Gary Thomas wrote: >>>> On 2015-03-24 05:32, Roberto Fichera wrote: >>>>> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>>>>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>>>>> Hi All, >>>>>>> >>>>>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>>>>> >>>>>> That's a pretty vague question. What's your target [board] >>>>>> and current setup? >>>>>> >>>>> Sorry! Forgot to add a bit of details! >>>>> >>>>> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >>>>> typical setup to move all my customizations. Mainly the question what to do to set my board >>>>> SOC_FAMILY to "mx6:m6sx". >>>>> >>>> Looks correct - look at how other i.MX6SX targets like imx6sxsabresd >>>> are handled. >>> That's what I did, but on Dizzy such target doesn't exist, hence the question. >> SoloX is not supported on Dizzy. Only Frodo (1.8). > > How it's Frodo status? Is it enough stable? Going to be released in April :) -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 14:00 ` Otavio Salvador @ 2015-03-24 14:06 ` Roberto Fichera 2015-03-24 15:25 ` Otavio Salvador 0 siblings, 1 reply; 10+ messages in thread From: Roberto Fichera @ 2015-03-24 14:06 UTC (permalink / raw) To: meta-freescale@yoctoproject.org On 03/24/2015 03:00 PM, Otavio Salvador wrote: > On Tue, Mar 24, 2015 at 10:50 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >> On 03/24/2015 02:21 PM, Otavio Salvador wrote: >> >> Hi Otavio, >> >>> On Tue, Mar 24, 2015 at 9:04 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >>>> On 03/24/2015 12:45 PM, Gary Thomas wrote: >>>>> On 2015-03-24 05:32, Roberto Fichera wrote: >>>>>> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>>>>>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>>>>>> Hi All, >>>>>>>> >>>>>>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>>>>>> >>>>>>> That's a pretty vague question. What's your target [board] >>>>>>> and current setup? >>>>>>> >>>>>> Sorry! Forgot to add a bit of details! >>>>>> >>>>>> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >>>>>> typical setup to move all my customizations. Mainly the question what to do to set my board >>>>>> SOC_FAMILY to "mx6:m6sx". >>>>>> >>>>> Looks correct - look at how other i.MX6SX targets like imx6sxsabresd >>>>> are handled. >>>> That's what I did, but on Dizzy such target doesn't exist, hence the question. >>> SoloX is not supported on Dizzy. Only Frodo (1.8). >> How it's Frodo status? Is it enough stable? > Going to be released in April :) Is it current master branch right? > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Moving to iMX6 SoloX CPU 2015-03-24 14:06 ` Roberto Fichera @ 2015-03-24 15:25 ` Otavio Salvador 0 siblings, 0 replies; 10+ messages in thread From: Otavio Salvador @ 2015-03-24 15:25 UTC (permalink / raw) To: Roberto Fichera; +Cc: meta-freescale@yoctoproject.org On Tue, Mar 24, 2015 at 11:06 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: > On 03/24/2015 03:00 PM, Otavio Salvador wrote: >> On Tue, Mar 24, 2015 at 10:50 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >>> On 03/24/2015 02:21 PM, Otavio Salvador wrote: >>> >>> Hi Otavio, >>> >>>> On Tue, Mar 24, 2015 at 9:04 AM, Roberto Fichera <kernel@tekno-soft.it> wrote: >>>>> On 03/24/2015 12:45 PM, Gary Thomas wrote: >>>>>> On 2015-03-24 05:32, Roberto Fichera wrote: >>>>>>> On 03/24/2015 12:14 PM, Gary Thomas wrote: >>>>>>>> On 2015-03-24 04:50, Roberto Fichera wrote: >>>>>>>>> Hi All, >>>>>>>>> >>>>>>>>> Just want to know that to do to move my current Dizzy setup to use an iMX6 SoloX CPU. >>>>>>>>> >>>>>>>> That's a pretty vague question. What's your target [board] >>>>>>>> and current setup? >>>>>>>> >>>>>>> Sorry! Forgot to add a bit of details! >>>>>>> >>>>>>> I'm currently on custom board based on imx6slevk, so I guess I can start from an imx6sxevk >>>>>>> typical setup to move all my customizations. Mainly the question what to do to set my board >>>>>>> SOC_FAMILY to "mx6:m6sx". >>>>>>> >>>>>> Looks correct - look at how other i.MX6SX targets like imx6sxsabresd >>>>>> are handled. >>>>> That's what I did, but on Dizzy such target doesn't exist, hence the question. >>>> SoloX is not supported on Dizzy. Only Frodo (1.8). >>> How it's Frodo status? Is it enough stable? >> Going to be released in April :) > > Is it current master branch right? Yes. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-03-24 15:25 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-03-24 10:50 Moving to iMX6 SoloX CPU Roberto Fichera 2015-03-24 11:14 ` Gary Thomas 2015-03-24 11:32 ` Roberto Fichera 2015-03-24 11:45 ` Gary Thomas 2015-03-24 12:04 ` Roberto Fichera 2015-03-24 13:21 ` Otavio Salvador 2015-03-24 13:50 ` Roberto Fichera 2015-03-24 14:00 ` Otavio Salvador 2015-03-24 14:06 ` Roberto Fichera 2015-03-24 15:25 ` Otavio Salvador
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.