[linux-sunxi] Re: [PATCH v4 1/2] phy-sun4i-usb: Add full support for usb0 phy / OTG

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 11-06-15 10:29, Chanwoo Choi wrote:
> Hi Hans,
>
> On 06/11/2015 05:21 PM, Hans de Goede wrote:
>> Hi Chanwoo,
>>
>> Thanks for the quick review.
>>
>> On 11-06-15 10:07, Chanwoo Choi wrote:
>>> Hi Hans,
>>>
>>> I add the comment about extcon-related code.
>>>
>>> Firstly,
>>> I'd like you to implment the extcon driver for phy-sun4i-usb device
>>> in drivers/extcon/ directoryby using MFD
>>
>> No, just no, this is not what the MFD framework is for, the usb-phy
>> in question here is not a multifunction device. The MFD framework
>> is intended for true multi-function devices like i2c attached
>> PMICs which have regulators, gpios, pwm, input (power button),
>> chargers, power-supply, etc. That is NOT the case here.
>>
>> Also moving this to the MFD framework would very likely requiring
>> the devicetree binding for the usb-phy to change which we cannot
>> do as that would break the devicetree ABI.
>>
>>> because there are both extcon
>>> provider driver and extcon client driver. I think that all extcon
>>> provider driver better to be included in drivers/extcon/ directory.
>>> extcon_set_cable_state() function should be handled in extcon provider
>>> driver which is incluced in drivers/extcon/ directory.
>>
>> I do not find this a compelling reason, there are plenty of subsystems
>> where not all implementations of the subsystem class live in the subsystem
>> directory, e.g. input and hwmon devices are often also found outside of
>> the input and hwmon driver directories.
>
> There are difference on between input/hwmon and extcon.
>
> Because input and hwmon driver implement the only one type driver as provider driver.
> But, extcon implement the two type driver of both extcon provider and extcon client driver.
> The extcon is similiar with regulator and clock framework as resource.
>
> extcon provider driver to provider the event when the state of external connector is changed.
> - devm_extcon_dev_register()
> - e.g., almost extcon provider driver are included in 'drivers/extcon/' directory.

I understand, but that does not change my first argument, that the usb-phy is not
a MFD device. And although it may be desirable to keep extcon provider drivers
in the drivers/extcon, there are no technical reasons to do so.

The whole reason why Kishon asked me to start using the extcon framework is to avoid
adding a private API to the phy-sun4i-usb code for notifying the musb-sunxi code
about otg-id-pin status changes. Adding a separate driver for just the extcon bits
means re-adding a private api to the phy-sun4i-usb code but this time for the
extcon code, at which point we might just as well skip extcon and have the
musb-sunxi glue code call directly into the phy-sun4i-usb code...

Needing a private API for a separate extcn driver actually is a good argument to
NOT have a separate extcon driver and keep the extcon code in the phy-sun4i-usb code,
where as I see no technical arguments in favor of a separate extcon driver.

Regards,

Hans