[PATCH-v4 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding

[vaibhav.hiremath@linaro.org (Vaibhav Hiremath)]

On Friday 26 June 2015 11:35 AM, Yi Zhang wrote:
> On Thu, Jun 25, 2015 at 03:26:29PM +0800, Vaibhav Hiremath wrote:
>> With addition of DT support to 88pm800 mfd driver, this patch
>> adds new DT binding documentation along with respective properties.
>>
>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
>> ---
>>   Documentation/devicetree/bindings/mfd/88pm800.txt | 54 +++++++++++++++++++++++
>>   1 file changed, 54 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
>> new file mode 100644
>> index 0000000..f56b751
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
>> @@ -0,0 +1,54 @@
>> +* Marvell 88PM8xx Power Management IC
>> +
>> +Required parent device properties:
>> +- compatible : "marvell,88pm800", "marvell,88pm805", "marvell,88pm860"
>> +- reg : the I2C slave address for the 88pm8xx chip
>> +- interrupts : IRQ line for the 88pm8xx chip
>> +- interrupt-controller: describes the 88pm8xx as an interrupt controller
>> +- #interrupt-cells : should be 1.
>> +		- The cell is the 88pm8xx local IRQ number
>> +
>> +88pm8xx family of devices consists of varied group of sub-devices:
>    what about using "88pm80x family of devices..."?
>    for we also have another series of chip, with the name of 88pm88x..

I renamed it after Rob's suggestion, but at that time we didn't see
88pm88x coming.
But I think now, I should stick to 88pm800 only, as it doesn't make
match with both 88pm822 and 88pm860.

Rob, let me know if you think otherwise.

Thanks,
Vaibhav