[PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

AC'97 bus can support asymmetric playback/capture rates
so enable them in this case in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
---
 sound/soc/fsl/fsl_ssi.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 2ce9e1d..f3034b9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	/* Are the RX and the TX clocks locked? */
 	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
-		ssi_private->cpu_dai_drv.symmetric_rates = 1;
+		if (!fsl_ssi_is_ac97(ssi_private))
+			ssi_private->cpu_dai_drv.symmetric_rates = 1;
+
 		ssi_private->cpu_dai_drv.symmetric_channels = 1;
 		ssi_private->cpu_dai_drv.symmetric_samplebits = 1;
 	}

[PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

AC'97 bus can support asymmetric playback/capture rates
so enable them in this case in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
---
 sound/soc/fsl/fsl_ssi.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 2ce9e1d..f3034b9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	/* Are the RX and the TX clocks locked? */
 	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
-		ssi_private->cpu_dai_drv.symmetric_rates = 1;
+		if (!fsl_ssi_is_ac97(ssi_private))
+			ssi_private->cpu_dai_drv.symmetric_rates = 1;
+
 		ssi_private->cpu_dai_drv.symmetric_channels = 1;
 		ssi_private->cpu_dai_drv.symmetric_samplebits = 1;
 	}

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Timur Tabi]

Maciej S. Szmigiero wrote:
>   	/* Are the RX and the TX clocks locked? */
>   	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +		if (!fsl_ssi_is_ac97(ssi_private))
> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +

Is this necessary?  Why not just add fsl,ssi-asynchronous to the AC97 
device tree node?

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Timur Tabi]

Maciej S. Szmigiero wrote:
>   	/* Are the RX and the TX clocks locked? */
>   	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +		if (!fsl_ssi_is_ac97(ssi_private))
> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +

Is this necessary?  Why not just add fsl,ssi-asynchronous to the AC97 
device tree node?

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

W dniu 28.06.2015 16:01, Timur Tabi pisze:
> Maciej S. Szmigiero wrote:
>>       /* Are the RX and the TX clocks locked? */
>>       if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
>> -        ssi_private->cpu_dai_drv.symmetric_rates = 1;
>> +        if (!fsl_ssi_is_ac97(ssi_private))
>> +            ssi_private->cpu_dai_drv.symmetric_rates = 1;
>> +
> 
> Is this necessary?  Why not just add fsl,ssi-asynchronous to the AC97 device tree node?

Because in the AC'97 mode the driver supports only one channel config and one sample format
anyway the remaining settings controlled by this property don't do anything.

Since it should be safe to enable asymmetric rates with any AC'97 CODEC I think it is good
to do it in driver than to add "fsl,ssi-asynchronous" to every AC'97 DT node.

Also the description of this property in fsl,ssi.txt looks like that it only makes sense in
non-AC'97 mode.

Best regards,
Maciej Szmigiero

[PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

AC'97 bus can support asymmetric playback/capture rates
so enable them in this case in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
---
 sound/soc/fsl/fsl_ssi.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index a83b900..7f4f0b9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	/* Are the RX and the TX clocks locked? */
 	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
-		ssi_private->cpu_dai_drv.symmetric_rates = 1;
+		if (!fsl_ssi_is_ac97(ssi_private))
+			ssi_private->cpu_dai_drv.symmetric_rates = 1;
+
 		ssi_private->cpu_dai_drv.symmetric_channels = 1;
 		ssi_private->cpu_dai_drv.symmetric_samplebits = 1;
 	}

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Markus Pargmann]

[-- Attachment #1: Type: text/plain, Size: 1290 bytes --]

Hi,

On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
> AC'97 bus can support asymmetric playback/capture rates
> so enable them in this case in fsl_ssi driver.
> 
> Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
> ---
>  sound/soc/fsl/fsl_ssi.c |    4 +++-
>  1 files changed, 3 insertions(+), 1 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index a83b900..7f4f0b9 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>  
>  	/* Are the RX and the TX clocks locked? */
>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +		if (!fsl_ssi_is_ac97(ssi_private))
> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> +

Why don't you use the DT property that is parsed here to enable
asymmetric rates?

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Markus Pargmann]

[-- Attachment #1: Type: text/plain, Size: 1670 bytes --]

On Fri, Jul 31, 2015 at 07:27:19AM +0200, Markus Pargmann wrote:
> Hi,
> 
> On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
> > AC'97 bus can support asymmetric playback/capture rates
> > so enable them in this case in fsl_ssi driver.
> > 
> > Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
> > ---
> >  sound/soc/fsl/fsl_ssi.c |    4 +++-
> >  1 files changed, 3 insertions(+), 1 deletions(-)
> > 
> > diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> > index a83b900..7f4f0b9 100644
> > --- a/sound/soc/fsl/fsl_ssi.c
> > +++ b/sound/soc/fsl/fsl_ssi.c
> > @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> >  
> >  	/* Are the RX and the TX clocks locked? */
> >  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> > -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> > +		if (!fsl_ssi_is_ac97(ssi_private))
> > +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> > +
> 
> Why don't you use the DT property that is parsed here to enable
> asymmetric rates?

Just found the last version of this series. Please use v2 and describe
changes for a new iteration of a series.

There is also a different setup with AC97 which does not use DMA. See
the long comment at the top of the file about how ac97 is already used.

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

Hi Markus,

Thanks for looking into the changes.

On 31.07.2015 07:53, Markus Pargmann wrote:
> On Fri, Jul 31, 2015 at 07:27:19AM +0200, Markus Pargmann wrote:
>> Hi,
>>
>> On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
>>> AC'97 bus can support asymmetric playback/capture rates
>>> so enable them in this case in fsl_ssi driver.
>>>
>>> Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
>>> ---
>>>  sound/soc/fsl/fsl_ssi.c |    4 +++-
>>>  1 files changed, 3 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
>>> index a83b900..7f4f0b9 100644
>>> --- a/sound/soc/fsl/fsl_ssi.c
>>> +++ b/sound/soc/fsl/fsl_ssi.c
>>> @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>>>  
>>>  	/* Are the RX and the TX clocks locked? */
>>>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
>>> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
>>> +		if (!fsl_ssi_is_ac97(ssi_private))
>>> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
>>> +
>>
>> Why don't you use the DT property that is parsed here to enable
>> asymmetric rates?

Because in the AC'97 mode the driver supports only one channel config and one sample format
anyway the remaining settings controlled by this property don't do anything.

Since it should be safe to enable asymmetric rates with any AC'97 CODEC I think it is good
to do it in driver than to add "fsl,ssi-asynchronous" to every AC'97 DT node.

Also the description of this property in fsl,ssi.txt looks like that it only makes sense in
non-AC'97 mode.

> Just found the last version of this series. Please use v2 and describe
> changes for a new iteration of a series.

This is just a resubmission, there are no functional differences since
it was originally submitted a month ago. 

> There is also a different setup with AC97 which does not use DMA. See
> the long comment at the top of the file about how ac97 is already used.

I understand that the problem with FIQ handler described in comment
on top of fsl_ssi.c only pertains incoming data, that is capture.

This patch effectively does not touch capture rates as they are already
limited to 48kHz only since this is the only capture rate defined in
fsl_ssi AC'97 DAI driver capture capabilities.

> Regards,
> 
> Markus

Best regards,
Maciej Szmigiero

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Maciej S. Szmigiero]

Hi Markus,

Thanks for looking into the changes.

On 31.07.2015 07:53, Markus Pargmann wrote:
> On Fri, Jul 31, 2015 at 07:27:19AM +0200, Markus Pargmann wrote:
>> Hi,
>>
>> On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
>>> AC'97 bus can support asymmetric playback/capture rates
>>> so enable them in this case in fsl_ssi driver.
>>>
>>> Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
>>> ---
>>>  sound/soc/fsl/fsl_ssi.c |    4 +++-
>>>  1 files changed, 3 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
>>> index a83b900..7f4f0b9 100644
>>> --- a/sound/soc/fsl/fsl_ssi.c
>>> +++ b/sound/soc/fsl/fsl_ssi.c
>>> @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
>>>  
>>>  	/* Are the RX and the TX clocks locked? */
>>>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
>>> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
>>> +		if (!fsl_ssi_is_ac97(ssi_private))
>>> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
>>> +
>>
>> Why don't you use the DT property that is parsed here to enable
>> asymmetric rates?

Because in the AC'97 mode the driver supports only one channel config and one sample format
anyway the remaining settings controlled by this property don't do anything.

Since it should be safe to enable asymmetric rates with any AC'97 CODEC I think it is good
to do it in driver than to add "fsl,ssi-asynchronous" to every AC'97 DT node.

Also the description of this property in fsl,ssi.txt looks like that it only makes sense in
non-AC'97 mode.

> Just found the last version of this series. Please use v2 and describe
> changes for a new iteration of a series.

This is just a resubmission, there are no functional differences since
it was originally submitted a month ago. 

> There is also a different setup with AC97 which does not use DMA. See
> the long comment at the top of the file about how ac97 is already used.

I understand that the problem with FIQ handler described in comment
on top of fsl_ssi.c only pertains incoming data, that is capture.

This patch effectively does not touch capture rates as they are already
limited to 48kHz only since this is the only capture rate defined in
fsl_ssi AC'97 DAI driver capture capabilities.

> Regards,
> 
> Markus

Best regards,
Maciej Szmigiero

Re: [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

[Markus Pargmann]

[-- Attachment #1: Type: text/plain, Size: 2939 bytes --]

Hi,

On Fri, Jul 31, 2015 at 04:38:20PM +0200, Maciej S. Szmigiero wrote:
> Hi Markus,
> 
> Thanks for looking into the changes.
> 
> On 31.07.2015 07:53, Markus Pargmann wrote:
> > On Fri, Jul 31, 2015 at 07:27:19AM +0200, Markus Pargmann wrote:
> >> Hi,
> >>
> >> On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
> >>> AC'97 bus can support asymmetric playback/capture rates
> >>> so enable them in this case in fsl_ssi driver.
> >>>
> >>> Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
> >>> ---
> >>>  sound/soc/fsl/fsl_ssi.c |    4 +++-
> >>>  1 files changed, 3 insertions(+), 1 deletions(-)
> >>>
> >>> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> >>> index a83b900..7f4f0b9 100644
> >>> --- a/sound/soc/fsl/fsl_ssi.c
> >>> +++ b/sound/soc/fsl/fsl_ssi.c
> >>> @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> >>>  
> >>>  	/* Are the RX and the TX clocks locked? */
> >>>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> >>> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> >>> +		if (!fsl_ssi_is_ac97(ssi_private))
> >>> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> >>> +
> >>
> >> Why don't you use the DT property that is parsed here to enable
> >> asymmetric rates?
> 
> Because in the AC'97 mode the driver supports only one channel config and one sample format
> anyway the remaining settings controlled by this property don't do anything.
> 
> Since it should be safe to enable asymmetric rates with any AC'97 CODEC I think it is good
> to do it in driver than to add "fsl,ssi-asynchronous" to every AC'97 DT node.
> 
> Also the description of this property in fsl,ssi.txt looks like that it only makes sense in
> non-AC'97 mode.
> 
> > Just found the last version of this series. Please use v2 and describe
> > changes for a new iteration of a series.
> 
> This is just a resubmission, there are no functional differences since
> it was originally submitted a month ago. 

I see, 'RESEND' tag would be helpful then.

> 
> > There is also a different setup with AC97 which does not use DMA. See
> > the long comment at the top of the file about how ac97 is already used.
> 
> I understand that the problem with FIQ handler described in comment
> on top of fsl_ssi.c only pertains incoming data, that is capture.
> 
> This patch effectively does not touch capture rates as they are already
> limited to 48kHz only since this is the only capture rate defined in
> fsl_ssi AC'97 DAI driver capture capabilities.

Ok, great.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Applied "ASoC: fsl_ssi: enable AC'97 asymmetric rates" to the asoc tree

[Mark Brown]

The patch

   ASoC: fsl_ssi: enable AC'97 asymmetric rates

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 06cb373692083d169ab080b31c55af91d22b6d99 Mon Sep 17 00:00:00 2001
From: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Date: Wed, 5 Aug 2015 17:24:10 +0200
Subject: [PATCH] ASoC: fsl_ssi: enable AC'97 asymmetric rates

AC'97 bus can support asymmetric playback/capture rates
so enable them in this case in fsl_ssi driver.

Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/fsl/fsl_ssi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 2ce9e1d..f3034b9 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	/* Are the RX and the TX clocks locked? */
 	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
-		ssi_private->cpu_dai_drv.symmetric_rates = 1;
+		if (!fsl_ssi_is_ac97(ssi_private))
+			ssi_private->cpu_dai_drv.symmetric_rates = 1;
+
 		ssi_private->cpu_dai_drv.symmetric_channels = 1;
 		ssi_private->cpu_dai_drv.symmetric_samplebits = 1;
 	}
-- 
2.5.0