* [PATCH 0/3] ARM: mvebu: minor improvements to Armada 388 GP support
@ 2015-06-18 12:38 Thomas Petazzoni
2015-06-18 12:38 ` [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP Thomas Petazzoni
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Thomas Petazzoni @ 2015-06-18 12:38 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This small set of three commits makes some minor improvements to the
Armada 388 GP board support.
Thomas
Thomas Petazzoni (3):
ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP
ARM: mvebu: update EEPROM description of Armada 388 GP
ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada
388 GP
arch/arm/boot/dts/armada-388-gp.dts | 12 +++++++-----
arch/arm/configs/mvebu_v7_defconfig | 4 ++++
2 files changed, 11 insertions(+), 5 deletions(-)
--
2.1.0
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP 2015-06-18 12:38 [PATCH 0/3] ARM: mvebu: minor improvements to Armada 388 GP support Thomas Petazzoni @ 2015-06-18 12:38 ` Thomas Petazzoni 2015-06-29 12:46 ` Gregory CLEMENT 2015-06-18 12:38 ` [PATCH 2/3] ARM: mvebu: update EEPROM description of " Thomas Petazzoni 2015-06-18 12:38 ` [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for " Thomas Petazzoni 2 siblings, 1 reply; 10+ messages in thread From: Thomas Petazzoni @ 2015-06-18 12:38 UTC (permalink / raw) To: linux-arm-kernel This regulator was lacking the reference to the GPIO that controls it, and the regulator-min-microvolt and regulator-max-microvolt properties. Thanks to this commit, the pwr-sata0 regulator now looks more like the other pwr-sata{1,2,3} regulators in the same Device Tree, with of course the exception of a different GPIO reference. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/boot/dts/armada-388-gp.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 78514ab..5164b9a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -301,9 +301,11 @@ reg_sata0: pwr-sata0 { compatible = "regulator-fixed"; regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; enable-active-high; regulator-always-on; - + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; }; reg_5v_sata0: v5-sata0 { -- 2.1.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP 2015-06-18 12:38 ` [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP Thomas Petazzoni @ 2015-06-29 12:46 ` Gregory CLEMENT 2015-07-09 13:20 ` Gregory CLEMENT 0 siblings, 1 reply; 10+ messages in thread From: Gregory CLEMENT @ 2015-06-29 12:46 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 18/06/2015 14:38, Thomas Petazzoni wrote: > This regulator was lacking the reference to the GPIO that controls it, > and the regulator-min-microvolt and regulator-max-microvolt > properties. Thanks to this commit, the pwr-sata0 regulator now looks > more like the other pwr-sata{1,2,3} regulators in the same Device > Tree, with of course the exception of a different GPIO reference. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Thanks, Gregory > --- > arch/arm/boot/dts/armada-388-gp.dts | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts > index 78514ab..5164b9a 100644 > --- a/arch/arm/boot/dts/armada-388-gp.dts > +++ b/arch/arm/boot/dts/armada-388-gp.dts > @@ -301,9 +301,11 @@ > reg_sata0: pwr-sata0 { > compatible = "regulator-fixed"; > regulator-name = "pwr_en_sata0"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > enable-active-high; > regulator-always-on; > - > + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; > }; > > reg_5v_sata0: v5-sata0 { > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP 2015-06-29 12:46 ` Gregory CLEMENT @ 2015-07-09 13:20 ` Gregory CLEMENT 0 siblings, 0 replies; 10+ messages in thread From: Gregory CLEMENT @ 2015-07-09 13:20 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 29/06/2015 14:46, Gregory CLEMENT wrote: > Hi Thomas, > > On 18/06/2015 14:38, Thomas Petazzoni wrote: >> This regulator was lacking the reference to the GPIO that controls it, >> and the regulator-min-microvolt and regulator-max-microvolt >> properties. Thanks to this commit, the pwr-sata0 regulator now looks >> more like the other pwr-sata{1,2,3} regulators in the same Device >> Tree, with of course the exception of a different GPIO reference. >> >> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> applied on mvebu/dt Thanks, Gregory > > > Thanks, > > Gregory > >> --- >> arch/arm/boot/dts/armada-388-gp.dts | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts >> index 78514ab..5164b9a 100644 >> --- a/arch/arm/boot/dts/armada-388-gp.dts >> +++ b/arch/arm/boot/dts/armada-388-gp.dts >> @@ -301,9 +301,11 @@ >> reg_sata0: pwr-sata0 { >> compatible = "regulator-fixed"; >> regulator-name = "pwr_en_sata0"; >> + regulator-min-microvolt = <12000000>; >> + regulator-max-microvolt = <12000000>; >> enable-active-high; >> regulator-always-on; >> - >> + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; >> }; >> >> reg_5v_sata0: v5-sata0 { >> > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] ARM: mvebu: update EEPROM description of Armada 388 GP 2015-06-18 12:38 [PATCH 0/3] ARM: mvebu: minor improvements to Armada 388 GP support Thomas Petazzoni 2015-06-18 12:38 ` [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP Thomas Petazzoni @ 2015-06-18 12:38 ` Thomas Petazzoni 2015-06-29 12:50 ` Gregory CLEMENT 2015-06-18 12:38 ` [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for " Thomas Petazzoni 2 siblings, 1 reply; 10+ messages in thread From: Thomas Petazzoni @ 2015-06-18 12:38 UTC (permalink / raw) To: linux-arm-kernel Contrary to what the Device Tree indicates, the EEPROM at 0x54 is not populated, so we get rid of this comment. However, there is an EEPROM at 0x57, so we add support for this AT24C64 EEPROM: $ hexdump -C /sys/bus/i2c/devices/0-0057/eeprom 00000000 0c ff f3 ff ff ff ff ff ff ff ff ff ff ff ff ff |................| 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00002000 Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/boot/dts/armada-388-gp.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 5164b9a..fc1ee3e 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -81,10 +81,6 @@ pinctrl-0 = <&i2c0_pins>; status = "okay"; clock-frequency = <100000>; - /* - * The EEPROM located at adresse 54 is needed - * for the boot - DO NOT ERASE IT - - */ expander0: pca9555 at 20 { compatible = "nxp,pca9555"; @@ -111,6 +107,10 @@ reg = <0x21>; }; + eeprom at 57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; }; serial at 12000 { -- 2.1.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/3] ARM: mvebu: update EEPROM description of Armada 388 GP 2015-06-18 12:38 ` [PATCH 2/3] ARM: mvebu: update EEPROM description of " Thomas Petazzoni @ 2015-06-29 12:50 ` Gregory CLEMENT 2015-07-09 13:20 ` Gregory CLEMENT 0 siblings, 1 reply; 10+ messages in thread From: Gregory CLEMENT @ 2015-06-29 12:50 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 18/06/2015 14:38, Thomas Petazzoni wrote: > Contrary to what the Device Tree indicates, the EEPROM at 0x54 is not > populated, so we get rid of this comment. > > However, there is an EEPROM at 0x57, so we add support for this > AT24C64 EEPROM: > > $ hexdump -C /sys/bus/i2c/devices/0-0057/eeprom > 00000000 0c ff f3 ff ff ff ff ff ff ff ff ff ff ff ff ff |................| > 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| > * > 00002000 > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Thanks, Gregory > --- > arch/arm/boot/dts/armada-388-gp.dts | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts > index 5164b9a..fc1ee3e 100644 > --- a/arch/arm/boot/dts/armada-388-gp.dts > +++ b/arch/arm/boot/dts/armada-388-gp.dts > @@ -81,10 +81,6 @@ > pinctrl-0 = <&i2c0_pins>; > status = "okay"; > clock-frequency = <100000>; > - /* > - * The EEPROM located at adresse 54 is needed > - * for the boot - DO NOT ERASE IT - > - */ > > expander0: pca9555 at 20 { > compatible = "nxp,pca9555"; > @@ -111,6 +107,10 @@ > reg = <0x21>; > }; > > + eeprom at 57 { > + compatible = "atmel,24c64"; > + reg = <0x57>; > + }; > }; > > serial at 12000 { > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] ARM: mvebu: update EEPROM description of Armada 388 GP 2015-06-29 12:50 ` Gregory CLEMENT @ 2015-07-09 13:20 ` Gregory CLEMENT 0 siblings, 0 replies; 10+ messages in thread From: Gregory CLEMENT @ 2015-07-09 13:20 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 29/06/2015 14:50, Gregory CLEMENT wrote: > Hi Thomas, > > On 18/06/2015 14:38, Thomas Petazzoni wrote: >> Contrary to what the Device Tree indicates, the EEPROM at 0x54 is not >> populated, so we get rid of this comment. >> >> However, there is an EEPROM at 0x57, so we add support for this >> AT24C64 EEPROM: >> >> $ hexdump -C /sys/bus/i2c/devices/0-0057/eeprom >> 00000000 0c ff f3 ff ff ff ff ff ff ff ff ff ff ff ff ff |................| >> 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| >> * >> 00002000 >> >> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> > applied on mvebu/dt Thanks, Gregory > > Thanks, > > Gregory > >> --- >> arch/arm/boot/dts/armada-388-gp.dts | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts >> index 5164b9a..fc1ee3e 100644 >> --- a/arch/arm/boot/dts/armada-388-gp.dts >> +++ b/arch/arm/boot/dts/armada-388-gp.dts >> @@ -81,10 +81,6 @@ >> pinctrl-0 = <&i2c0_pins>; >> status = "okay"; >> clock-frequency = <100000>; >> - /* >> - * The EEPROM located at adresse 54 is needed >> - * for the boot - DO NOT ERASE IT - >> - */ >> >> expander0: pca9555 at 20 { >> compatible = "nxp,pca9555"; >> @@ -111,6 +107,10 @@ >> reg = <0x21>; >> }; >> >> + eeprom at 57 { >> + compatible = "atmel,24c64"; >> + reg = <0x57>; >> + }; >> }; >> >> serial at 12000 { >> > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP 2015-06-18 12:38 [PATCH 0/3] ARM: mvebu: minor improvements to Armada 388 GP support Thomas Petazzoni 2015-06-18 12:38 ` [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP Thomas Petazzoni 2015-06-18 12:38 ` [PATCH 2/3] ARM: mvebu: update EEPROM description of " Thomas Petazzoni @ 2015-06-18 12:38 ` Thomas Petazzoni 2015-06-29 12:51 ` Gregory CLEMENT 2 siblings, 1 reply; 10+ messages in thread From: Thomas Petazzoni @ 2015-06-18 12:38 UTC (permalink / raw) To: linux-arm-kernel The Armada 388 GP board has the following hardware features that were not enabled in mvebu_v7_defconfig: * An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d) * A PCA9555 I2C GPIO expander * Several fixed regulators Therefore, this commit adds the necessary options to mvebu_v7_defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/configs/mvebu_v7_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index cacc9f4..13fcd02 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_SPI_NOR=y +CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_AHCI_MVEBU=y @@ -83,11 +84,14 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PCA953X=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y -- 2.1.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP 2015-06-18 12:38 ` [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for " Thomas Petazzoni @ 2015-06-29 12:51 ` Gregory CLEMENT 2015-07-09 13:32 ` Gregory CLEMENT 0 siblings, 1 reply; 10+ messages in thread From: Gregory CLEMENT @ 2015-06-29 12:51 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 18/06/2015 14:38, Thomas Petazzoni wrote: > The Armada 388 GP board has the following hardware features that were > not enabled in mvebu_v7_defconfig: > > * An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d) > * A PCA9555 I2C GPIO expander > * Several fixed regulators > > Therefore, this commit adds the necessary options to mvebu_v7_defconfig. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Thanks, Gregory > --- > arch/arm/configs/mvebu_v7_defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig > index cacc9f4..13fcd02 100644 > --- a/arch/arm/configs/mvebu_v7_defconfig > +++ b/arch/arm/configs/mvebu_v7_defconfig > @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y > CONFIG_MTD_NAND=y > CONFIG_MTD_NAND_PXA3xx=y > CONFIG_MTD_SPI_NOR=y > +CONFIG_EEPROM_AT24=y > CONFIG_BLK_DEV_SD=y > CONFIG_ATA=y > CONFIG_AHCI_MVEBU=y > @@ -83,11 +84,14 @@ CONFIG_I2C_MV64XXX=y > CONFIG_SPI=y > CONFIG_SPI_ORION=y > CONFIG_GPIO_SYSFS=y > +CONFIG_GPIO_PCA953X=y > CONFIG_SENSORS_GPIO_FAN=y > CONFIG_THERMAL=y > CONFIG_ARMADA_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_ORION_WATCHDOG=y > +CONFIG_REGULATOR=y > +CONFIG_REGULATOR_FIXED_VOLTAGE=y > CONFIG_SOUND=y > CONFIG_SND=y > CONFIG_SND_SOC=y > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP 2015-06-29 12:51 ` Gregory CLEMENT @ 2015-07-09 13:32 ` Gregory CLEMENT 0 siblings, 0 replies; 10+ messages in thread From: Gregory CLEMENT @ 2015-07-09 13:32 UTC (permalink / raw) To: linux-arm-kernel Hi Thomas, On 29/06/2015 14:51, Gregory CLEMENT wrote: > Hi Thomas, > > On 18/06/2015 14:38, Thomas Petazzoni wrote: >> The Armada 388 GP board has the following hardware features that were >> not enabled in mvebu_v7_defconfig: >> >> * An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d) >> * A PCA9555 I2C GPIO expander >> * Several fixed regulators >> >> Therefore, this commit adds the necessary options to mvebu_v7_defconfig. >> >> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > > > Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> > applied on mvebu/config Thanks, Gregory > Thanks, > > Gregory > >> --- >> arch/arm/configs/mvebu_v7_defconfig | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig >> index cacc9f4..13fcd02 100644 >> --- a/arch/arm/configs/mvebu_v7_defconfig >> +++ b/arch/arm/configs/mvebu_v7_defconfig >> @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y >> CONFIG_MTD_NAND=y >> CONFIG_MTD_NAND_PXA3xx=y >> CONFIG_MTD_SPI_NOR=y >> +CONFIG_EEPROM_AT24=y >> CONFIG_BLK_DEV_SD=y >> CONFIG_ATA=y >> CONFIG_AHCI_MVEBU=y >> @@ -83,11 +84,14 @@ CONFIG_I2C_MV64XXX=y >> CONFIG_SPI=y >> CONFIG_SPI_ORION=y >> CONFIG_GPIO_SYSFS=y >> +CONFIG_GPIO_PCA953X=y >> CONFIG_SENSORS_GPIO_FAN=y >> CONFIG_THERMAL=y >> CONFIG_ARMADA_THERMAL=y >> CONFIG_WATCHDOG=y >> CONFIG_ORION_WATCHDOG=y >> +CONFIG_REGULATOR=y >> +CONFIG_REGULATOR_FIXED_VOLTAGE=y >> CONFIG_SOUND=y >> CONFIG_SND=y >> CONFIG_SND_SOC=y >> > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-07-09 13:32 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-06-18 12:38 [PATCH 0/3] ARM: mvebu: minor improvements to Armada 388 GP support Thomas Petazzoni 2015-06-18 12:38 ` [PATCH 1/3] ARM: mvebu: fix description of pwr-sata0 regulator on Armada 388 GP Thomas Petazzoni 2015-06-29 12:46 ` Gregory CLEMENT 2015-07-09 13:20 ` Gregory CLEMENT 2015-06-18 12:38 ` [PATCH 2/3] ARM: mvebu: update EEPROM description of " Thomas Petazzoni 2015-06-29 12:50 ` Gregory CLEMENT 2015-07-09 13:20 ` Gregory CLEMENT 2015-06-18 12:38 ` [PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for " Thomas Petazzoni 2015-06-29 12:51 ` Gregory CLEMENT 2015-07-09 13:32 ` Gregory CLEMENT
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.