[PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support

[PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_tsc can wake-up system from low power
state via pinctrl and IO daisy chain mechanism. This patch series add
support for such optional wake up interrupt to be handled via recently
introduced generic wake irq handling framework.

Tested on am437x-gp-evm, with some out of tree patches to support
suspend/resume on am437x.


Vignesh R (2):
  input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup
    interrupt
  ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for
    pixcir_i2c_tsc

 arch/arm/boot/dts/am437x-gp-evm.dts       |  4 ++++
 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 3 files changed, 18 insertions(+), 4 deletions(-)

-- 
2.4.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_tsc can wake-up system from low power
state via pinctrl and IO daisy chain mechanism. This patch series add
support for such optional wake up interrupt to be handled via recently
introduced generic wake irq handling framework.

Tested on am437x-gp-evm, with some out of tree patches to support
suspend/resume on am437x.


Vignesh R (2):
  input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup
    interrupt
  ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for
    pixcir_i2c_tsc

 arch/arm/boot/dts/am437x-gp-evm.dts       |  4 ++++
 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 3 files changed, 18 insertions(+), 4 deletions(-)

-- 
2.4.5

[PATCH v2 0/2] pixcir_i2c_ts: Add optional wakeup irq support

[Vignesh R]

On am437x-gp-evm, pixcir_i2c_tsc can wake-up system from low power
state via pinctrl and IO daisy chain mechanism. This patch series add
support for such optional wake up interrupt to be handled via recently
introduced generic wake irq handling framework.

Tested on am437x-gp-evm, with some out of tree patches to support
suspend/resume on am437x.


Vignesh R (2):
  input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup
    interrupt
  ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for
    pixcir_i2c_tsc

 arch/arm/boot/dts/am437x-gp-evm.dts       |  4 ++++
 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 3 files changed, 18 insertions(+), 4 deletions(-)

-- 
2.4.5

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy chain.
Add support for optional wakeup interrupt source by regsitering to
automated wake IRQ framework introduced by commit 4990d4fe327b ("PM /
Wakeirq: Add automated device wake IRQ handling").
This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
support for optional wake-up")

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
v2:
 * use of_irq_get_byname()
 * remove enable/disable_wake_irq()

 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 8f3e243a62bf..b9cebf274678 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -29,6 +29,8 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pm_wakeirq.h>
 
 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
@@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
 				goto unlock;
 			}
 		}
-
-		enable_irq_wake(client->irq);
 	} else if (input->users) {
 		ret = pixcir_stop(ts);
 	}
@@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
 	mutex_lock(&input->mutex);
 
 	if (device_may_wakeup(&client->dev)) {
-		disable_irq_wake(client->irq);
-
 		if (!input->users) {
 			ret = pixcir_stop(ts);
 			if (ret) {
@@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
 	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
 		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
 
+	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
+
 	return pdata;
 }
 #else
@@ -564,11 +564,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, tsdata);
 	device_init_wakeup(&client->dev, 1);
 
+	/* Register wakeirq */
+	error = pdata->wakeirq ?
+		dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) :
+		dev_pm_set_wake_irq(dev, client->irq);
+	if (error)
+		dev_info(dev, "unable to get wakeirq %d\n",
+			 error);
+
 	return 0;
 }
 
 static int pixcir_i2c_ts_remove(struct i2c_client *client)
 {
+	dev_pm_clear_wake_irq(&client->dev);
 	device_init_wakeup(&client->dev, 0);
 
 	return 0;
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index 7bae83b7c396..da573de5a5ee 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
 	int x_max;
 	int y_max;
 	int gpio_attb;		/* GPIO connected to ATTB line */
+	int wakeirq;
 	struct pixcir_i2c_chip_data chip;
 };
 
-- 
2.4.5

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy chain.
Add support for optional wakeup interrupt source by regsitering to
automated wake IRQ framework introduced by commit 4990d4fe327b ("PM /
Wakeirq: Add automated device wake IRQ handling").
This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
support for optional wake-up")

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
v2:
 * use of_irq_get_byname()
 * remove enable/disable_wake_irq()

 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 8f3e243a62bf..b9cebf274678 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -29,6 +29,8 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pm_wakeirq.h>
 
 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
@@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
 				goto unlock;
 			}
 		}
-
-		enable_irq_wake(client->irq);
 	} else if (input->users) {
 		ret = pixcir_stop(ts);
 	}
@@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
 	mutex_lock(&input->mutex);
 
 	if (device_may_wakeup(&client->dev)) {
-		disable_irq_wake(client->irq);
-
 		if (!input->users) {
 			ret = pixcir_stop(ts);
 			if (ret) {
@@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
 	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
 		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
 
+	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
+
 	return pdata;
 }
 #else
@@ -564,11 +564,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, tsdata);
 	device_init_wakeup(&client->dev, 1);
 
+	/* Register wakeirq */
+	error = pdata->wakeirq ?
+		dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) :
+		dev_pm_set_wake_irq(dev, client->irq);
+	if (error)
+		dev_info(dev, "unable to get wakeirq %d\n",
+			 error);
+
 	return 0;
 }
 
 static int pixcir_i2c_ts_remove(struct i2c_client *client)
 {
+	dev_pm_clear_wake_irq(&client->dev);
 	device_init_wakeup(&client->dev, 0);
 
 	return 0;
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index 7bae83b7c396..da573de5a5ee 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
 	int x_max;
 	int y_max;
 	int gpio_attb;		/* GPIO connected to ATTB line */
+	int wakeirq;
 	struct pixcir_i2c_chip_data chip;
 };
 
-- 
2.4.5

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

On am437x-gp-evm, pixcir touchscreen can wake the system from low power
state by generating wake-up interrupt via pinctrl and IO daisy chain.
Add support for optional wakeup interrupt source by regsitering to
automated wake IRQ framework introduced by commit 4990d4fe327b ("PM /
Wakeirq: Add automated device wake IRQ handling").
This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
support for optional wake-up")

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
v2:
 * use of_irq_get_byname()
 * remove enable/disable_wake_irq()

 drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
 include/linux/input/pixcir_ts.h           |  1 +
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 8f3e243a62bf..b9cebf274678 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -29,6 +29,8 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pm_wakeirq.h>
 
 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
 
@@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
 				goto unlock;
 			}
 		}
-
-		enable_irq_wake(client->irq);
 	} else if (input->users) {
 		ret = pixcir_stop(ts);
 	}
@@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
 	mutex_lock(&input->mutex);
 
 	if (device_may_wakeup(&client->dev)) {
-		disable_irq_wake(client->irq);
-
 		if (!input->users) {
 			ret = pixcir_stop(ts);
 			if (ret) {
@@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
 	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
 		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
 
+	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
+
 	return pdata;
 }
 #else
@@ -564,11 +564,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, tsdata);
 	device_init_wakeup(&client->dev, 1);
 
+	/* Register wakeirq */
+	error = pdata->wakeirq ?
+		dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) :
+		dev_pm_set_wake_irq(dev, client->irq);
+	if (error)
+		dev_info(dev, "unable to get wakeirq %d\n",
+			 error);
+
 	return 0;
 }
 
 static int pixcir_i2c_ts_remove(struct i2c_client *client)
 {
+	dev_pm_clear_wake_irq(&client->dev);
 	device_init_wakeup(&client->dev, 0);
 
 	return 0;
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index 7bae83b7c396..da573de5a5ee 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
 	int x_max;
 	int y_max;
 	int gpio_attb;		/* GPIO connected to ATTB line */
+	int wakeirq;
 	struct pixcir_i2c_chip_data chip;
 };
 
-- 
2.4.5

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Tony Lindgren]

* Vignesh R <vigneshr-l0cyMroinI0@public.gmane.org> [150719 21:53]:
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>  
> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> +
>  	return pdata;

What about handling -EPROVE_DEFER here? At least pinctrl-single can be
be a loadable module for the dedicated wakeirqs.

Regarads,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Tony Lindgren]

* Vignesh R <vigneshr@ti.com> [150719 21:53]:
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>  
> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> +
>  	return pdata;

What about handling -EPROVE_DEFER here? At least pinctrl-single can be
be a loadable module for the dedicated wakeirqs.

Regarads,

Tony

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Tony Lindgren]

* Vignesh R <vigneshr@ti.com> [150719 21:53]:
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>  
> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> +
>  	return pdata;

What about handling -EPROVE_DEFER here? At least pinctrl-single can be
be a loadable module for the dedicated wakeirqs.

Regarads,

Tony

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Dmitry Torokhov]

On Sun, Jul 19, 2015 at 11:09:30PM -0700, Tony Lindgren wrote:
> * Vignesh R <vigneshr@ti.com> [150719 21:53]:
> > @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> >  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> >  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
> >  
> > +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> > +
> >  	return pdata;
> 
> What about handling -EPROVE_DEFER here? At least pinctrl-single can be
> be a loadable module for the dedicated wakeirqs.

Right. I think we should only allow -ENODATA to continue and return
error in all other cases.

Also, I think "irq" suffix on name is redundant.

Thanks.

-- 
Dmitry

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Dmitry Torokhov]

On Sun, Jul 19, 2015 at 11:09:30PM -0700, Tony Lindgren wrote:
> * Vignesh R <vigneshr@ti.com> [150719 21:53]:
> > @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
> >  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
> >  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
> >  
> > +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> > +
> >  	return pdata;
> 
> What about handling -EPROVE_DEFER here? At least pinctrl-single can be
> be a loadable module for the dedicated wakeirqs.

Right. I think we should only allow -ENODATA to continue and return
error in all other cases.

Also, I think "irq" suffix on name is redundant.

Thanks.

-- 
Dmitry

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

Hi Dmitry,

On 07/20/2015 11:54 AM, Dmitry Torokhov wrote:
> On Sun, Jul 19, 2015 at 11:09:30PM -0700, Tony Lindgren wrote:
>> * Vignesh R <vigneshr@ti.com> [150719 21:53]:
>>> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>>>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>>>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>>>  
>>> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
>>> +
>>>  	return pdata;
>>
>> What about handling -EPROVE_DEFER here? At least pinctrl-single can be
>> be a loadable module for the dedicated wakeirqs.
> 
> Right. I think we should only allow -ENODATA to continue and return
> error in all other cases.

-EINVAL will be returned if "interrupt-names" is not specified. I will
make execption for -ENODATA & -EINVAL, and return error in all other cases?

> 
> Also, I think "irq" suffix on name is redundant.

Ok, will drop "irq" suffix:

+		interrupt-names = "tsc", "wakeup";

> 
> Thanks.
> 

-- 
Regards
Vignesh

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

Hi Dmitry,

On 07/20/2015 11:54 AM, Dmitry Torokhov wrote:
> On Sun, Jul 19, 2015 at 11:09:30PM -0700, Tony Lindgren wrote:
>> * Vignesh R <vigneshr@ti.com> [150719 21:53]:
>>> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>>>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>>>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>>>  
>>> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
>>> +
>>>  	return pdata;
>>
>> What about handling -EPROVE_DEFER here? At least pinctrl-single can be
>> be a loadable module for the dedicated wakeirqs.
> 
> Right. I think we should only allow -ENODATA to continue and return
> error in all other cases.

-EINVAL will be returned if "interrupt-names" is not specified. I will
make execption for -ENODATA & -EINVAL, and return error in all other cases?

> 
> Also, I think "irq" suffix on name is redundant.

Ok, will drop "irq" suffix:

+		interrupt-names = "tsc", "wakeup";

> 
> Thanks.
> 

-- 
Regards
Vignesh

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Vignesh R]

Hi Dmitry,

On 07/20/2015 11:54 AM, Dmitry Torokhov wrote:
> On Sun, Jul 19, 2015 at 11:09:30PM -0700, Tony Lindgren wrote:
>> * Vignesh R <vigneshr@ti.com> [150719 21:53]:
>>> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>>>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>>>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>>>  
>>> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
>>> +
>>>  	return pdata;
>>
>> What about handling -EPROVE_DEFER here? At least pinctrl-single can be
>> be a loadable module for the dedicated wakeirqs.
> 
> Right. I think we should only allow -ENODATA to continue and return
> error in all other cases.

-EINVAL will be returned if "interrupt-names" is not specified. I will
make execption for -ENODATA & -EINVAL, and return error in all other cases?

> 
> Also, I think "irq" suffix on name is redundant.

Ok, will drop "irq" suffix:

+		interrupt-names = "tsc", "wakeup";

> 
> Thanks.
> 

-- 
Regards
Vignesh

Re: [PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Dmitry Torokhov]

On Mon, Jul 20, 2015 at 10:20:13AM +0530, Vignesh R wrote:
> On am437x-gp-evm, pixcir touchscreen can wake the system from low power
> state by generating wake-up interrupt via pinctrl and IO daisy chain.
> Add support for optional wakeup interrupt source by regsitering to
> automated wake IRQ framework introduced by commit 4990d4fe327b ("PM /
> Wakeirq: Add automated device wake IRQ handling").
> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
> support for optional wake-up")
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> v2:
>  * use of_irq_get_byname()
>  * remove enable/disable_wake_irq()
> 
>  drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
>  include/linux/input/pixcir_ts.h           |  1 +
>  2 files changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 8f3e243a62bf..b9cebf274678 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -29,6 +29,8 @@
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
>  #include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/pm_wakeirq.h>
>  
>  #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
>  
> @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
>  				goto unlock;
>  			}
>  		}
> -
> -		enable_irq_wake(client->irq);
>  	} else if (input->users) {
>  		ret = pixcir_stop(ts);
>  	}
> @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
>  	mutex_lock(&input->mutex);
>  
>  	if (device_may_wakeup(&client->dev)) {
> -		disable_irq_wake(client->irq);
> -
>  		if (!input->users) {
>  			ret = pixcir_stop(ts);
>  			if (ret) {
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>  
> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> +
>  	return pdata;
>  }
>  #else
> @@ -564,11 +564,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  	i2c_set_clientdata(client, tsdata);
>  	device_init_wakeup(&client->dev, 1);
>  
> +	/* Register wakeirq */
> +	error = pdata->wakeirq ?

Hmm, I guess the condition should be pdata->wakeirq > 0.

> +		dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) :
> +		dev_pm_set_wake_irq(dev, client->irq);
> +	if (error)
> +		dev_info(dev, "unable to get wakeirq %d\n",
> +			 error);
> +
>  	return 0;
>  }
>  
>  static int pixcir_i2c_ts_remove(struct i2c_client *client)
>  {
> +	dev_pm_clear_wake_irq(&client->dev);
>  	device_init_wakeup(&client->dev, 0);
>  
>  	return 0;
> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
> index 7bae83b7c396..da573de5a5ee 100644
> --- a/include/linux/input/pixcir_ts.h
> +++ b/include/linux/input/pixcir_ts.h
> @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
>  	int x_max;
>  	int y_max;
>  	int gpio_attb;		/* GPIO connected to ATTB line */
> +	int wakeirq;
>  	struct pixcir_i2c_chip_data chip;
>  };
>  
> -- 
> 2.4.5
> 

-- 
Dmitry

[PATCH v2 1/2] input: touchscreen: pixcir_i2c_ts: Add support for optional wakeup interrupt

[Dmitry Torokhov]

On Mon, Jul 20, 2015 at 10:20:13AM +0530, Vignesh R wrote:
> On am437x-gp-evm, pixcir touchscreen can wake the system from low power
> state by generating wake-up interrupt via pinctrl and IO daisy chain.
> Add support for optional wakeup interrupt source by regsitering to
> automated wake IRQ framework introduced by commit 4990d4fe327b ("PM /
> Wakeirq: Add automated device wake IRQ handling").
> This is similar in approach to commit 2a0b965cfb6e ("serial: omap: Add
> support for optional wake-up")
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> v2:
>  * use of_irq_get_byname()
>  * remove enable/disable_wake_irq()
> 
>  drivers/input/touchscreen/pixcir_i2c_ts.c | 17 +++++++++++++----
>  include/linux/input/pixcir_ts.h           |  1 +
>  2 files changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index 8f3e243a62bf..b9cebf274678 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -29,6 +29,8 @@
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
>  #include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/pm_wakeirq.h>
>  
>  #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
>  
> @@ -364,8 +366,6 @@ static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
>  				goto unlock;
>  			}
>  		}
> -
> -		enable_irq_wake(client->irq);
>  	} else if (input->users) {
>  		ret = pixcir_stop(ts);
>  	}
> @@ -386,8 +386,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
>  	mutex_lock(&input->mutex);
>  
>  	if (device_may_wakeup(&client->dev)) {
> -		disable_irq_wake(client->irq);
> -
>  		if (!input->users) {
>  			ret = pixcir_stop(ts);
>  			if (ret) {
> @@ -445,6 +443,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>  	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
>  		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
>  
> +	pdata->wakeirq = of_irq_get_byname(dev->of_node, "wakeupirq");
> +
>  	return pdata;
>  }
>  #else
> @@ -564,11 +564,20 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>  	i2c_set_clientdata(client, tsdata);
>  	device_init_wakeup(&client->dev, 1);
>  
> +	/* Register wakeirq */
> +	error = pdata->wakeirq ?

Hmm, I guess the condition should be pdata->wakeirq > 0.

> +		dev_pm_set_dedicated_wake_irq(dev, pdata->wakeirq) :
> +		dev_pm_set_wake_irq(dev, client->irq);
> +	if (error)
> +		dev_info(dev, "unable to get wakeirq %d\n",
> +			 error);
> +
>  	return 0;
>  }
>  
>  static int pixcir_i2c_ts_remove(struct i2c_client *client)
>  {
> +	dev_pm_clear_wake_irq(&client->dev);
>  	device_init_wakeup(&client->dev, 0);
>  
>  	return 0;
> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
> index 7bae83b7c396..da573de5a5ee 100644
> --- a/include/linux/input/pixcir_ts.h
> +++ b/include/linux/input/pixcir_ts.h
> @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
>  	int x_max;
>  	int y_max;
>  	int gpio_attb;		/* GPIO connected to ATTB line */
> +	int wakeirq;
>  	struct pixcir_i2c_chip_data chip;
>  };
>  
> -- 
> 2.4.5
> 

-- 
Dmitry

[PATCH v2 2/2] ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc

[Vignesh R]

Pixcir_i2c_tsc driver can now wakeup the system from lower power state
via pinctrl and IO daisy chain using generic wakeirq framwework. Add
optional wakeup irq entry to allow pixcir_i2c_tsc to wake system from
low power state.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

v2: 
 * Add interrupt-names property

 arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..2184ac5426cd 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -503,6 +503,10 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tscirq", "wakeupirq";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
-- 
2.4.5

[PATCH v2 2/2] ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc

[Vignesh R]

Pixcir_i2c_tsc driver can now wakeup the system from lower power state
via pinctrl and IO daisy chain using generic wakeirq framwework. Add
optional wakeup irq entry to allow pixcir_i2c_tsc to wake system from
low power state.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

v2: 
 * Add interrupt-names property

 arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..2184ac5426cd 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -503,6 +503,10 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tscirq", "wakeupirq";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
-- 
2.4.5

[PATCH v2 2/2] ARM: dts: AM437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_tsc

[Vignesh R]

Pixcir_i2c_tsc driver can now wakeup the system from lower power state
via pinctrl and IO daisy chain using generic wakeirq framwework. Add
optional wakeup irq entry to allow pixcir_i2c_tsc to wake system from
low power state.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

v2: 
 * Add interrupt-names property

 arch/arm/boot/dts/am437x-gp-evm.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..2184ac5426cd 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -503,6 +503,10 @@
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		interrupts-extended = <&gpio3 22 GPIO_ACTIVE_HIGH>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tscirq", "wakeupirq";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
-- 
2.4.5