Re: [PATCH v3 0/3] phy: ti-pipe3: dra7: sata: allow suspend to RAM (core-retention)

[Roger Quadros <rogerq@ti.com>]

Kishon & Tony,

You can please pick the first 2 patches for -next.

The 3rd patch is not required for SATA and I will send it as
a separate series.

cheers,
-roger

On 17/07/15 16:47, Roger Quadros wrote:
> Hi,
> 
> Implement workaround for SATA errata i783 (SATA Lockup After SATA DPLL Unlock/Relock)
> so that we can now turn off sata_refclk to support suspend-to-ram without preventing
> core-retention.
> 
> Depends on http://article.gmane.org/gmane.linux.ports.arm.omap/126670.
> 
> Changelog:
> v3:
> - used scm_conf node in dra7.dtsi for control register access.
> 
> v2:
> - Fixed pcie disable_clocks. Addressed review comments.
> 
> cheers,
> -roger
> 
> Roger Quadros (3):
>   phy: ti-pipe3: i783 workaround for SATA lockup after dpll
>     unlock/relock
>   ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
>   ARM: dts: dra7: Add scm_conf1 node and remove redundant nodes
> 
>  Documentation/devicetree/bindings/phy/ti-phy.txt | 16 +++++++
>  arch/arm/boot/dts/dra7.dtsi                      | 20 ++++----
>  drivers/phy/phy-ti-pipe3.c                       | 61 +++++++++++++++++++++---
>  3 files changed, 80 insertions(+), 17 deletions(-)
>