From: Javier Martinez Canillas <javier@osg.samsung.com>
To: Khem Raj <raj.khem@gmail.com>
Cc: yocto@yoctoproject.org,
Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Derek Foreman <derekf@osg.samsung.com>
Subject: Re: [meta-raspberrypi][PATCH 5/5] rpi-default-providers: Switch providers according to used gfx stack
Date: Wed, 5 Aug 2015 08:34:28 +0200 [thread overview]
Message-ID: <55C1AE74.2030808@osg.samsung.com> (raw)
In-Reply-To: <4731B312-4D73-4951-8E73-1579D8C54BD5@gmail.com>
Hello Khem,
On 08/04/2015 09:01 PM, Khem Raj wrote:
>
>> On Jul 30, 2015, at 1:34 AM, Javier Martinez Canillas <javier@osg.samsung.com> wrote:
>>
>> From: Derek Foreman <derekf@osg.samsung.com>
>>
>> The Raspberry Pi boards can use one of two graphics stacks: The "userland"
>> user-space driver or the VC4 drm/kms kernel driver. This patch allows the
>> user to choose if the VC4 driver has to be used instead and set the right
>> preferred providers for that case.
>>
>> Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
>> [javier: Extend commit msg and made conditional instead removing userland]
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>>
>> ---
>>
>> conf/machine/include/rpi-default-providers.inc | 8 ++++----
>> conf/machine/include/rpi-default-versions.inc | 2 +-
>> 2 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/conf/machine/include/rpi-default-providers.inc b/conf/machine/include/rpi-default-providers.inc
>> index ee3a3acce7bd..233f177bd16e 100644
>> --- a/conf/machine/include/rpi-default-providers.inc
>> +++ b/conf/machine/include/rpi-default-providers.inc
>> @@ -3,8 +3,8 @@
>> PREFERRED_PROVIDER_virtual/kernel = "linux-raspberrypi"
>> PREFERRED_PROVIDER_u-boot = "u-boot-rpi"
>> PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
>> -PREFERRED_PROVIDER_virtual/egl ?= "userland"
>> -PREFERRED_PROVIDER_virtual/libgles2 ?= "userland"
>> -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
>> -PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
>> +PREFERRED_PROVIDER_virtual/egl ?= "${@bb.utils.contains('DISTRO_FEATURES', 'vc4-gfx', 'mesa', 'userland', d)}"
>> +PREFERRED_PROVIDER_virtual/libgles2 ?= "${@bb.utils.contains('DISTRO_FEATURES', 'vc4-gfx', 'mesa', 'userland', d)}"
>> +PREFERRED_PROVIDER_virtual/libgl ?= "${@bb.utils.contains('DISTRO_FEATURES', 'vc4-gfx', 'mesa', 'mesa-gl', d)}"
>> +PREFERRED_PROVIDER_virtual/mesa ?= "${@bb.utils.contains('DISTRO_FEATURES', 'vc4-gfx', 'mesa', 'mesa-gl', d)}”
>
> who defines the distro feature ?
>
>
Distro features AFAICT are user defined options, you can for example have
the following in your conf/local.conf:
DISTRO_FEATURES_append = " vc4-gfx"
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
next prev parent reply other threads:[~2015-08-05 6:34 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-30 8:34 [meta-raspberrypi][PATCH 0/5] Add support for 4.1 kernel with vc4 DRM/KMS driver Javier Martinez Canillas
2015-07-30 8:34 ` [meta-raspberrypi][PATCH 1/5] linux-raspberrypi.inc: Make kgdboc kernel param optional Javier Martinez Canillas
2015-08-09 22:37 ` Andrei Gherzan
2015-07-30 8:34 ` [meta-raspberrypi][PATCH 2/5] rpi-config: Allow to mask GPU irqs Javier Martinez Canillas
2015-08-09 22:44 ` Andrei Gherzan
2015-08-10 7:48 ` Javier Martinez Canillas
2015-08-10 21:27 ` Andrei Gherzan
2015-07-30 8:34 ` [meta-raspberrypi][PATCH 3/5] sdcard_image-rpi.bbclass: Allocate more space for boot partition Javier Martinez Canillas
2015-08-09 21:17 ` Andreas Müller
2015-08-09 21:18 ` Andreas Müller
2015-08-09 21:57 ` Andrei Gherzan
2015-07-30 8:34 ` [meta-raspberrypi][PATCH 4/5] linux-raspberrypi: Add a 4.1 linux kernel with vc4 support Javier Martinez Canillas
2015-08-09 22:54 ` Andrei Gherzan
2015-08-10 7:59 ` Javier Martinez Canillas
2015-08-10 21:35 ` Andrei Gherzan
2015-07-30 8:34 ` [meta-raspberrypi][PATCH 5/5] rpi-default-providers: Switch providers according to used gfx stack Javier Martinez Canillas
2015-08-03 20:14 ` Andreas Müller
2015-08-04 16:17 ` Javier Martinez Canillas
2015-08-04 16:55 ` Andreas Müller
2015-08-05 6:25 ` Javier Martinez Canillas
2015-08-04 19:01 ` Khem Raj
2015-08-05 6:34 ` Javier Martinez Canillas [this message]
2015-08-06 2:54 ` Khem Raj
2015-08-06 6:59 ` Javier Martinez Canillas
2015-08-06 7:41 ` Andreas Müller
2015-08-07 10:45 ` Javier Martinez Canillas
2015-08-07 11:30 ` Andreas Müller
2015-08-07 11:32 ` Javier Martinez Canillas
2015-08-09 23:05 ` Andrei Gherzan
2015-08-09 23:37 ` Andreas Müller
2015-08-10 8:22 ` Javier Martinez Canillas
2015-08-10 21:30 ` Andrei Gherzan
2015-08-12 14:59 ` Javier Martinez Canillas
2015-08-12 17:15 ` Andreas Müller
2015-08-12 20:22 ` Andreas Müller
2015-08-13 7:22 ` Javier Martinez Canillas
2015-08-13 15:43 ` Javier Martinez Canillas
2015-08-13 16:00 ` Andreas Müller
2015-08-13 16:20 ` Javier Martinez Canillas
2015-08-10 8:04 ` Javier Martinez Canillas
2015-08-04 9:16 ` [meta-raspberrypi][PATCH 0/5] Add support for 4.1 kernel with vc4 DRM/KMS driver Petter Mabäcker
2015-08-04 16:07 ` Javier Martinez Canillas
2015-08-05 20:48 ` Petter Mabäcker
2015-08-06 7:03 ` Javier Martinez Canillas
2015-08-09 23:01 ` Andrei Gherzan
2015-08-10 8:02 ` Javier Martinez Canillas
2015-08-10 21:34 ` Andrei Gherzan
2015-08-10 21:54 ` Javier Martinez Canillas
2015-08-10 22:00 ` Andrei Gherzan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C1AE74.2030808@osg.samsung.com \
--to=javier@osg.samsung.com \
--cc=derekf@osg.samsung.com \
--cc=mchehab@osg.samsung.com \
--cc=raj.khem@gmail.com \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.