From: horia.geanta@freescale.com (Horia Geantă)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] ARM: configs: Add Freescale LS1021A defconfig
Date: Thu, 20 Aug 2015 19:58:36 +0300 [thread overview]
Message-ID: <55D6073C.1020000@freescale.com> (raw)
In-Reply-To: <BN3PR0301MB08672520CA978383BBF2CF6CFE790@BN3PR0301MB0867.namprd03.prod.outlook.com>
On 8/17/2015 6:42 AM, Wang Huan-B18965 wrote:
> Hi, Fabio,
Please don't top post.
>
> Based on the analysis and discussion, we prefer to use ls1021a_defconfig and remove LS1021A from imx_v6_v7_defconfig.
Alison, when you submit v4 for this patch (adding
CONFIG_ARCH_DMA_ADDR_T_64BIT=y as suggested), could you also send a
patch removing CONFIG_SOC_LS1021A from imx_v6_v7_config?
>
> Thanks.
>
> Best Regards,
> Alison Wang
>
>> On Fri, Aug 14, 2015 at 2:06 PM, Horia Geant?
>> <horia.geanta@freescale.com> wrote:
>>
>>> Another thing:
>>> Commit 385c0fb0e2c4 ("ARM: imx_v6_v7_defconfig: Select LS1021A")
>> added
>>> CONFIG_SOC_LS1021A in imx_v6_v7_defconfig.
>>>
>>> Besides this, booting a LS1021 AQDS board (Rev2) using
>>> imx_v6_v7_defconfig did not work (stuck at "Starting kernel").
>>
>> What would be the recommended approach?
>>
>> - Fix imx_v6_v7_defconfig so that it can make LS1021A to boot
>>
>> or
>>
>> - Use this proposed ls1021a_defconfig and remove LS1021A from
>> imx_v6_v7_defconfig?
>>
>> Regards,
>>
>> Fabio Estevam
WARNING: multiple messages have this Message-ID (diff)
From: "Horia Geantă" <horia.geanta@freescale.com>
To: Wang Huan-B18965 <alison.wang@freescale.com>,
Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Estevam Fabio-R49496 <Fabio.Estevam@freescale.com>,
Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
Subject: Re: [PATCH v3] ARM: configs: Add Freescale LS1021A defconfig
Date: Thu, 20 Aug 2015 19:58:36 +0300 [thread overview]
Message-ID: <55D6073C.1020000@freescale.com> (raw)
In-Reply-To: <BN3PR0301MB08672520CA978383BBF2CF6CFE790@BN3PR0301MB0867.namprd03.prod.outlook.com>
On 8/17/2015 6:42 AM, Wang Huan-B18965 wrote:
> Hi, Fabio,
Please don't top post.
>
> Based on the analysis and discussion, we prefer to use ls1021a_defconfig and remove LS1021A from imx_v6_v7_defconfig.
Alison, when you submit v4 for this patch (adding
CONFIG_ARCH_DMA_ADDR_T_64BIT=y as suggested), could you also send a
patch removing CONFIG_SOC_LS1021A from imx_v6_v7_config?
>
> Thanks.
>
> Best Regards,
> Alison Wang
>
>> On Fri, Aug 14, 2015 at 2:06 PM, Horia Geantă
>> <horia.geanta@freescale.com> wrote:
>>
>>> Another thing:
>>> Commit 385c0fb0e2c4 ("ARM: imx_v6_v7_defconfig: Select LS1021A")
>> added
>>> CONFIG_SOC_LS1021A in imx_v6_v7_defconfig.
>>>
>>> Besides this, booting a LS1021 AQDS board (Rev2) using
>>> imx_v6_v7_defconfig did not work (stuck at "Starting kernel").
>>
>> What would be the recommended approach?
>>
>> - Fix imx_v6_v7_defconfig so that it can make LS1021A to boot
>>
>> or
>>
>> - Use this proposed ls1021a_defconfig and remove LS1021A from
>> imx_v6_v7_defconfig?
>>
>> Regards,
>>
>> Fabio Estevam
next prev parent reply other threads:[~2015-08-20 16:58 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-07 10:03 [PATCH v3] ARM: configs: Add Freescale LS1021A defconfig Alison Wang
2015-08-07 10:03 ` Alison Wang
2015-08-12 13:20 ` Horia Geantă
2015-08-12 13:20 ` Horia Geantă
2015-08-14 17:06 ` Horia Geantă
2015-08-14 17:06 ` Horia Geantă
2015-08-14 17:28 ` Fabio Estevam
2015-08-14 17:28 ` Fabio Estevam
2015-08-17 3:42 ` Huan Wang
2015-08-17 3:42 ` Huan Wang
2015-08-20 16:58 ` Horia Geantă [this message]
2015-08-20 16:58 ` Horia Geantă
2015-08-28 8:04 ` Huan Wang
2015-08-28 8:04 ` Huan Wang
2015-08-28 8:50 ` Horia Geantă
2015-08-28 8:50 ` Horia Geantă
2015-08-28 16:54 ` Fabio Estevam
2015-08-28 16:54 ` Fabio Estevam
2015-09-16 8:22 ` Huan Wang
2015-09-16 8:22 ` Huan Wang
2015-09-17 1:10 ` Shawn Guo
2015-09-17 1:10 ` Shawn Guo
2015-09-17 9:11 ` Huan Wang
2015-09-17 9:11 ` Huan Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55D6073C.1020000@freescale.com \
--to=horia.geanta@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.