All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Denis V. Lunev" <den-lists@parallels.com>
To: marcandre.lureau@redhat.com, qemu-devel@nongnu.org
Cc: mdroth@linux.vnet.ibm.com
Subject: Re: [Qemu-devel] [PATCH v3 11/12] qga: add --dump-conf option
Date: Wed, 26 Aug 2015 22:00:51 +0300	[thread overview]
Message-ID: <55DE0CE3.90208@parallels.com> (raw)
In-Reply-To: <1440583525-21632-12-git-send-email-marcandre.lureau@redhat.com>

On 08/26/2015 01:05 PM, marcandre.lureau@redhat.com wrote:
> From: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> This new option allows to review the agent configuration,
> and ease the task of writing a configuration file.
>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
> ---
>   qga/main.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 62 insertions(+)
>
> diff --git a/qga/main.c b/qga/main.c
> index 9193043..72dc366 100644
> --- a/qga/main.c
> +++ b/qga/main.c
> @@ -941,6 +941,7 @@ typedef struct GAConfig {
>       GList *blacklist;
>       int daemonize;
>       GLogLevelFlags log_level;
> +    int dumpconf;
>   } GAConfig;
>   
>   static void config_load(GAConfig *config)
> @@ -1009,6 +1010,58 @@ end:
>       g_clear_error(&gerr);
>   }
>   
> +static gchar *list_join(GList *list, const gchar separator)
> +{
> +    GString *str = g_string_new("");
> +
> +    while (list) {
> +        str = g_string_append(str, (gchar *)list->data);
> +        list = g_list_next(list);
> +        if (list) {
> +            str = g_string_append_c(str, separator);
> +        }
> +    }
> +
> +    return g_string_free(str, FALSE);
> +}
> +
> +static void config_dump(GAConfig *config)
> +{
> +    GError *error = NULL;
> +    GKeyFile *keyfile;
> +    gchar *tmp;
> +
> +    keyfile = g_key_file_new();
keyfile == NULL either means error and you should
immediately return as I am not quite sure that calls
below will survive

Thus the check below for keyfile == NULL is extra
and could be dropped. If these functions are OK
with NULL then free will be also fine too and check
is not needed too.

> +    g_key_file_set_boolean(keyfile, "general", "daemon", config->daemonize);
> +    g_key_file_set_string(keyfile, "general", "method", config->method);
> +    g_key_file_set_string(keyfile, "general", "path", config->channel_path);
> +    if (config->log_filepath) {
> +        g_key_file_set_string(keyfile, "general", "logfile",
> +                              config->log_filepath);
> +    }
> +    g_key_file_set_string(keyfile, "general", "pidfile", config->pid_filepath);
> +#ifdef CONFIG_FSFREEZE
> +    if (config->fsfreeze_hook) {
> +        g_key_file_set_string(keyfile, "general", "fsfreeze-hook",
> +                              config->fsfreeze_hook);
> +    }
> +#endif
> +    g_key_file_set_string(keyfile, "general", "statedir", config->state_dir);
> +    g_key_file_set_boolean(keyfile, "general", "verbose",
> +                           config->log_level == G_LOG_LEVEL_MASK);
> +    tmp = list_join(config->blacklist, ',');
> +    g_key_file_set_string(keyfile, "general", "blacklist", tmp);
> +    g_free(tmp);
> +
> +    tmp = g_key_file_to_data(keyfile, NULL, &error);
> +    printf("%s", tmp);
> +
> +    g_free(tmp);
> +    if (keyfile) {
> +        g_key_file_free(keyfile);
> +    }
> +}
> +
>   static void config_parse(GAConfig *config, int argc, char **argv)
>   {
>       const char *sopt = "hVvdm:p:l:f:F::b:s:t:D";
> @@ -1016,6 +1069,7 @@ static void config_parse(GAConfig *config, int argc, char **argv)
>       const struct option lopt[] = {
>           { "help", 0, NULL, 'h' },
>           { "version", 0, NULL, 'V' },
> +        { "dump-conf", 0, NULL, 'D' },
>           { "logfile", 1, NULL, 'l' },
>           { "pidfile", 1, NULL, 'f' },
>   #ifdef CONFIG_FSFREEZE
> @@ -1067,6 +1121,9 @@ static void config_parse(GAConfig *config, int argc, char **argv)
>           case 'd':
>               config->daemonize = 1;
>               break;
> +        case 'D':
> +            config->dumpconf = 1;
> +            break;
>           case 'b': {
>               if (is_help_option(optarg)) {
>                   qmp_for_each_command(ga_print_cmd, NULL);
> @@ -1310,6 +1367,11 @@ int main(int argc, char **argv)
>                                                    config->state_dir);
>       s->frozen = check_is_frozen(s);
>   
> +    if (config->dumpconf) {
> +        config_dump(config);
> +        goto end;
> +    }
> +
>       ret = run_agent(s, config);
>   
>   end:

  reply	other threads:[~2015-08-26 19:01 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-26 10:05 [Qemu-devel] [PATCH v3 00/12] qemu-ga: add a configuration file marcandre.lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 01/12] qga: misc spelling marcandre.lureau
2015-08-26 17:40   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 02/12] qga: use exit() when parsing options marcandre.lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 03/12] qga: move string split in separate function marcandre.lureau
2015-08-26 17:55   ` Denis V. Lunev
2015-08-26 18:07     ` Marc-André Lureau
2015-08-26 18:23       ` Denis V. Lunev
2015-08-26 18:30         ` Marc-André Lureau
2015-08-26 18:33           ` Marc-André Lureau
2015-08-26 18:44           ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 04/12] qga: rename 'path' to 'channel_path' marcandre.lureau
2015-08-26 17:56   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 05/12] qga: copy argument strings marcandre.lureau
2015-08-26 18:09   ` Denis V. Lunev
2015-08-26 18:17     ` Marc-André Lureau
2015-08-26 18:27       ` Denis V. Lunev
2015-08-26 18:41         ` Marc-André Lureau
2015-08-26 18:49           ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 06/12] qga: move option parsing to separate function marcandre.lureau
2015-08-26 18:11   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 07/12] qga: fill default options in main() marcandre.lureau
2015-08-26 18:14   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 08/12] qga: move agent run in a separate function marcandre.lureau
2015-08-26 18:32   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 09/12] qga: free a bit more marcandre.lureau
2015-08-26 18:35   ` Denis V. Lunev
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 10/12] qga: add an optionnal qemu-ga.conf system configuration marcandre.lureau
2015-08-26 12:55   ` Eric Blake
2015-08-26 15:11     ` Marc-André Lureau
2015-08-26 15:17       ` Michael Roth
2015-08-26 18:41   ` Denis V. Lunev
2015-08-26 18:45     ` Marc-André Lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 11/12] qga: add --dump-conf option marcandre.lureau
2015-08-26 19:00   ` Denis V. Lunev [this message]
2015-08-26 19:03     ` Marc-André Lureau
2015-08-26 10:05 ` [Qemu-devel] [PATCH v3 12/12] qga: start a man page marcandre.lureau
2015-08-26 19:08   ` Denis V. Lunev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55DE0CE3.90208@parallels.com \
    --to=den-lists@parallels.com \
    --cc=marcandre.lureau@redhat.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.